{"title":"Baader Finder Scopes","description":"\u003cp\u003eBaader Planetarium finders help you aim the telescope before switching to the eyepiece or camera. The Vario-Finder is an erect-image finder scope, while the Sky Surfer III 30mm and Sky Surfer V are red dot finders for fast, unmagnified pointing.\u003c\/p\u003e\u003cp\u003eThe collection also includes standard dovetail finder bases, the Universal Red Dot Mount, Sky Surfer adapters for binoculars and spotting scopes, and MQR III and MQR IV brackets for 7x50 finders.\u003c\/p\u003e","products":[{"product_id":"baader-log-pot-illuminator-for-microguide-and-older-baader-finders","title":"Baader Log-Pot Illuminator for MicroGuide and older Baader Finders","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eVariable brightness illuminator\u003c\/li\u003e\n\u003cli\u003eLogarithmic potentiometer for fine control at low brightness\u003c\/li\u003e\n\u003cli\u003eDesigned for Baader MicroGuide eyepieces\u003c\/li\u003e\n\u003cli\u003eCompatible with older Baader finderscopes\u003c\/li\u003e\n\u003cli\u003eIncludes batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Log-Pot Illuminator for MicroGuide and older Baader Finders\u003c\/h2\u003e\n\u003cp\u003eThe Baader Log-Pot Illuminator is engineered for a single, critical task: providing precisely controlled reticle illumination for Baader MicroGuide eyepieces and older Baader finders. By using a logarithmic potentiometer, it allows for exceptionally fine adjustments at the dimmest settings, ensuring your crosshairs are visible without overwhelming faint guide stars. This illuminator is a direct-fit replacement or upgrade that makes manual guiding more accurate and comfortable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eLogarithmic Dimming for Optimal Reticle Contrast\u003c\/h3\u003e\n\u003cp\u003eStandard illuminators often suffer from a non-linear response, where the jump from \"off\" to the lowest setting is too bright, washing out dim stars. The Baader Log-Pot Illuminator solves this by using a logarithmic potentiometer (\"Log-Pot\"). This design concentrates the adjustment range at the low end, giving you granular control over the reticle's glow and allowing you to set the perfect, subtle brightness needed to see both the crosshairs and your target clearly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDirect-Fit for MicroGuide and Classic Baader Finders\u003c\/h3\u003e\n\u003cp\u003eThis illuminator is specifically threaded and sized to integrate seamlessly with compatible Baader equipment. It is the designated illuminator for the Baader MicroGuide eyepiece, a popular choice for off-axis guiding and measurement. It also provides a reliable illumination solution for users of older-generation Baader finderscopes that feature a port for a threaded reticle illuminator, restoring or upgrading their functionality for modern use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is a \"Log-Pot\" and why is it better for the Baader Illuminator?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA \"Log-Pot,\" or logarithmic potentiometer, provides non-linear adjustment. For an astronomical illuminator, this is critical because it gives you much finer control at very low brightness levels. This prevents the common problem where the reticle is too bright even on the lowest setting, which can make faint guide stars impossible to see.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Baader Log-Pot Illuminator fit my new Baader Vario-Finder?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis model is specifically designed for the Baader MicroGuide eyepiece and \u003cstrong\u003eolder Baader finders\u003c\/strong\u003e. Newer finders may use a different illumination system. Always check the accessory port on your specific finder or eyepiece to ensure it is compatible with a threaded illuminator before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I install the Baader Log-Pot Illuminator on a MicroGuide eyepiece?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward. Simply locate the threaded port on the body of the Baader MicroGuide eyepiece, typically covered by a small dust plug. Unscrew the plug, and then gently thread the Baader Log-Pot Illuminator into the port until it is snug. Do not overtighten.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Baader Log-Pot Illuminator come with batteries?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the Baader Log-Pot Illuminator includes the required batteries, allowing you to use it right out of the box.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is this illuminator essential when manually guiding on a faint galaxy like NGC 7331?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhen guiding on a faint star near a dim target like the galaxy NGC 7331 in Pegasus, your eye needs to be fully dark-adapted. A standard illuminator's lowest setting can be bright enough to compromise your dark adaptation and hide the star. The \u003cstrong\u003eBaader Log-Pot Illuminator's\u003c\/strong\u003e fine control lets you dim the reticle to a barely-perceptible level, keeping the guide star visible and allowing for more accurate, long-exposure guiding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the brightness continuously variable on the Baader Log-Pot Illuminator?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The illuminator features an on\/off switch integrated with the rotary brightness control. You turn the dial to switch it on and then continue turning it to smoothly increase the brightness from its minimum to maximum level, with no fixed \"clicks\" or steps in between.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967319666973,"sku":"BAA-2404305","price":70.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Log-Pot-Illuminator-for-MicroGuide-and-older-Baader-Finders-1__98836.1597110717.1280.1280.jpg?v=1684340601"},{"product_id":"baader-standard-dovetail-finder-base","title":"Baader Standard Dovetail Finder Base","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eMachined from a solid block of aluminum for zero flexure\u003c\/li\u003e\n\u003cli\u003eSinusoidal base provides two linear contact points for stability\u003c\/li\u003e\n\u003cli\u003eUniversal design fits a wide range of optical tube diameters\u003c\/li\u003e\n\u003cli\u003eAccepts standard Vixen\/Synta-style finder dovetails\u003c\/li\u003e\n\u003cli\u003eFlexible mounting with central hole or elongated slots\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Standard Dovetail Finder Base\u003c\/h2\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSinusoidal Base: A Milled Platform for Universal Stability\u003c\/h3\u003e\n\u003cp\u003eThe Baader Standard Dovetail Finder Base is engineered for a secure, non-flexing connection to your optical tube. Unlike cheaper cast alternatives, this base is milled from a solid block of aluminum, ensuring it will not bend or warp under the load of a finder or small guide scope. This superior construction is critical for maintaining alignment and pointing accuracy.\u003c\/p\u003e\n\u003cp\u003eIts unique sinusoidal base is designed to create two linear points of contact on any telescope tube, providing a stable, rock-free fit across a wide range of curvatures. The base can be attached using a single central screw or two screws in the elongated slots, offering flexibility for matching existing holes on your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is a milled finder base like the Baader Standard Dovetail better than a cast one?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA \u003cstrong\u003emilled base\u003c\/strong\u003e, like this one from Baader, is machined from a solid block of aluminum. This process results in a component with superior structural integrity and precise dimensions, completely eliminating flexure. Cast bases are made by pouring molten metal into a mold, which can lead to internal stresses, lower density, and a higher likelihood of bending or breaking under load.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Baader Standard Dovetail Finder Base achieve a stable fit on different telescopes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe bottom of the base features a \u003cstrong\u003esinusoidal curve\u003c\/strong\u003e. This special shape ensures that instead of touching at just one point on a curved tube, the base makes firm, linear contact at two distinct lines. This design prevents the base from rocking or shifting, providing a much more stable platform than a simple flat-bottomed base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat finders are compatible with the Baader Standard Dovetail Finder Base?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis base is designed to accept any finder scope, red dot finder, or small guide scope that uses the common \u003cstrong\u003eVixen\/Synta-style dovetail bar\u003c\/strong\u003e. This is the most prevalent standard in the industry, making the Baader base compatible with a vast majority of finder accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have a Celestron 8\" SCT. Will the Baader Standard Dovetail Finder Base fit my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The base is designed for universal compatibility with a wide range of tube diameters, including popular Schmidt-Cassegrains like the C8. Its mounting options with a central hole or wider slots allow it to be attached to many existing factory-drilled hole patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount the Baader Standard Dovetail Finder Base using existing holes on my optical tube?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, its design offers flexible mounting. The base includes both a central screw hole and a pair of elongated slots. This allows you to match a variety of pre-drilled hole spacings on different optical tubes without needing to drill new holes in your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Baader base prevent my heavy finder scope from flexing?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. This is the primary reason to choose a milled base. Its solid aluminum construction provides a rigid platform that \u003cstrong\u003eeliminates flexure\u003c\/strong\u003e, even with heavier accessories like a 50mm or 60mm finder scope that also serves as a guidescope. This ensures your finder remains perfectly aligned with your main telescope all night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967365968157,"sku":"BAA-2457000","price":50.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Standard-Dovetail-Finder-Base-1__97551.1597111005.1280.1280.jpg?v=1684341418"},{"product_id":"baader-universal-red-dot-mount-incl-standard-finder-base","title":"Baader Universal Red Dot Mount incl. Standard Finder Base","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eMounts red dot finders with Weaver standard rails\u003c\/li\u003e\n\u003cli\u003eFits most standard finder shoes from Celestron, Sky-Watcher, Vixen, and Bresser\u003c\/li\u003e\n\u003cli\u003eElevated design provides clearance on all telescope types\u003c\/li\u003e\n\u003cli\u003eSolid, milled metal construction for maximum stability\u003c\/li\u003e\n\u003cli\u003eRemovable V-base for mounting to flat surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eBaader Universal Red Dot Mount incl. Standard Finder Base\u003c\/h2\u003e\n      \u003cp\u003eThe Baader Universal Red Dot Mount (RDM) provides a solid, all-metal platform for attaching popular red dot finders to your telescope. Designed to fit the V-shaped finder shoes on most Celestron, Sky-Watcher, Vixen, and Bresser telescopes, it accepts any finder using the Weaver standard rail. Its elevated profile ensures comfortable use even on Newtonian reflectors where clearance can be tight.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eUniversal Compatibility: Broad Telescope and Red Dot Finder Integration\u003c\/h3\u003e\n      \u003cp\u003eThis mount is engineered to be a near-universal solution for adding a zero-power finder to your setup. The V-shaped dovetail base slides directly into the standard finder brackets found on a wide range of commercial telescopes, providing a secure, wiggle-free connection. The top of the mount features a Weaver standard rail, making it compatible with a vast array of red dot and reflex sights.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eConstruction and Mounting: Solid Metal Build with Adaptable Base\u003c\/h3\u003e\n      \u003cp\u003eUnlike cheaper cast-metal or plastic alternatives, the Baader RDM is milled from a solid piece of metal for superior rigidity and durability. This ensures your finder holds its alignment reliably. The baseplate features a sinusoidal cut, allowing it to sit flush and stable on telescope tubes of various diameters, while the V-shaped dovetail portion can be removed entirely, allowing the rail to be bolted directly to a flat surface or custom mounting plate.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Baader RDM fit my Celestron or Sky-Watcher telescope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, the Baader Universal Red Dot Mount is designed with a \u003cstrong\u003eV-shaped dovetail base\u003c\/strong\u003e that is fully compatible with the standard finder shoes supplied on most modern Celestron, Sky-Watcher, Vixen, and Bresser telescopes.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of red dot finder can I use with this Baader mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis mount is equipped with a \u003cstrong\u003eWeaver standard rail\u003c\/strong\u003e on top. It will accept most commercially available red dot or reflex sights that are designed to attach to this common mounting platform.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Baader Universal Mount work well on my 8\" f\/5 Newtonian?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eAbsolutely. The raised design of the Baader RDM provides ample clearance between the telescope tube and the finder. This elevated position makes it much more comfortable to position your head and view through the finder, which is a significant ergonomic advantage on Newtonian reflectors.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I attach the Baader RDM to a flat surface, like a custom accessory plate?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. The V-shaped base part that slides into a standard finder shoe can be unbolted and removed. This leaves you with the rail section, which can then be mounted directly onto any flat surface using screws.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat makes the Baader RDM better than less expensive finder mounts?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe primary difference is build quality. The Baader RDM is \u003cstrong\u003emilled from solid metal\u003c\/strong\u003e, not die-cast from a cheaper alloy. This results in a much more rigid and stable platform that is less prone to flexing or losing alignment during use or transport.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eI'm adding a second finder to my Celestron NexStar 8SE. Is this Baader mount a good choice?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, it's an excellent choice. If you add a second finder shoe to your SCT, this mount will slide in perfectly. Its solid metal construction ensures that your red dot finder will maintain its alignment with your main optics, making it a reliable pointing tool for your GoTo system.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_III_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer III Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366033693,"sku":"BAA-2457011","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader-Universal-Red-Dot-Mount-incl-Standard-Finder-Base-1__03785.1597111008.1280.1280.jpg?v=1684341420"},{"product_id":"baader-multipurpose-finder-bracket-mqr-iii-7x50-max-62mm","title":"Baader Multipurpose Finder Bracket MQR III 7x50 (max 62mm)","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eCNC Milled Construction for Rigidity\u003c\/li\u003e\n\u003cli\u003eQuick-Release Dovetail for Repeatable Alignment\u003c\/li\u003e\n\u003cli\u003eModular Design Adapts to Finderscopes or Red-Dot Sights\u003c\/li\u003e\n\u003cli\u003eFits Standard Vixen, Celestron, and Synta Finder Bases\u003c\/li\u003e\n\u003cli\u003eIncludes Baader Standard Base for Universal Telescope Mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Multipurpose Finder Bracket MQR III\u003c\/h2\u003e\n\u003cp\u003eThe Baader Multipurpose Finder Bracket MQR III is engineered to solve a common frustration in astronomy: losing finder alignment. This CNC-milled bracket uses a precision dovetail system that guarantees your finder returns to the exact same position every time, eliminating the need for constant realignment. Its robust, all-metal construction is so solid it can double as a secure carrying handle for your telescope, while its modular design allows it to adapt to nearly any finder type you own.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMQR III Precision: A Quick-Release System That Holds Perfect Alignment\u003c\/h3\u003e\n\u003cp\u003eThe core of the MQR III is its quick-release dovetail mechanism. Unlike simpler brackets that rely on thumbscrews pressing against a post, this system provides a rigid, repeatable connection that maintains optical axis alignment with extreme precision. You can remove your finderscope for transport and reattach it in seconds, confident that your alignment is exactly where you left it, saving valuable time under dark skies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBaader's Modular Design: Adaptable for Finderscopes and Red-Dot Sights\u003c\/h3\u003e\n\u003cp\u003eThis bracket is designed for true multipurpose use. In its standard configuration, it holds traditional finderscopes securely within its rings. For a lower-profile setup, you can remove the central riser block and attach the dovetail directly to the finder base. For red-dot finders like the Baader SkySurfer, simply remove the top mounting plate to reveal a V-channel that accepts standard Weaver-style rails, making it a single solution for all your pointing devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Mounting \u0026amp; Robust Build: Fits Most Telescopes\u003c\/h3\u003e\n\u003cp\u003eBaader ensures broad compatibility for the MQR III. The bracket's dovetail fits directly into the standard finder shoes found on many Celestron, Vixen, and Synta telescopes without any adapters. For telescopes without an integrated base, the included Baader Standard Base provides a secure mounting point for a wide range of optical tube diameters. The entire assembly is CNC-milled, resulting in a flexure-free bracket that is strong enough to serve as a reliable handle for your instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the Baader MQR III finder bracket over standard brackets?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantage is its \u003cstrong\u003erepeatable alignment\u003c\/strong\u003e. The quick-release dovetail system is machined to tight tolerances, ensuring that when you remove and reattach your finderscope, it returns to the exact same position without needing to be realigned. This saves significant time and frustration in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the MQR III bracket with a red-dot finder like a SkySurfer?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The MQR III is designed to be modular. You can remove the upper mounting plate and rings, which exposes a V-channel at the top of the center piece. This channel is designed to accept red-dot finders that use a standard Weaver-style mounting rail, such as the Baader SkySurfer III and V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need the included Baader Standard Base to mount the MQR III on my Celestron SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, you likely will not. The dovetail on the MQR III is designed to fit directly into the standard finder bases that come pre-installed on most modern Celestron, Synta, and Vixen telescopes. The included Baader Standard Base is for mounting the bracket on telescope tubes that do not have a compatible finder shoe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the modular design of the Baader MQR III benefit my setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe modular design allows you to configure the bracket for your specific needs. You can:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a standard finderscope\u003c\/strong\u003e with the included rings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount a red-dot finder\u003c\/strong\u003e by removing the top plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreate a low-profile setup\u003c\/strong\u003e by removing the 70mm center piece and attaching the dovetail directly to the base.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Baader MQR III bracket strong enough to use as a handle for my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The bracket is CNC-milled from solid metal, making it exceptionally rigid and durable. Its mechanical design is robust enough that it can safely be used as a removable carrying handle for your telescope tube assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the maximum finder scope size the MQR III can hold?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader MQR III is designed to accommodate finderscopes with a tube diameter of up to 62mm. This makes it suitable for most common 50mm and 60mm finders.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eFits Vixen, Celestron, Synta standard finder bases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCNC Milled Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinder Capacity\u003c\/td\u003e\n\u003ctd\u003eSupports finder tubes up to 62mm in diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eQuick-Release Dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eNo contents provided\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_MQR_III_and_MQR_IV_Finder_Bracket_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium MQR III and MQR IV Finder Bracket Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366426909,"sku":"BAA-2457020","price":140.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Multipurpose-Finder-Bracket-MQR-III-7x50-max-62mm-1__52427.1597111011.1280.1280.jpg?v=1684341445"},{"product_id":"baader-multipurpose-finder-bracket-mqr-iv-7x50-max-72mm","title":"Baader Multipurpose Finder Bracket MQR IV 7x50 (max 72mm)","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAccommodates finder scopes up to 72mm in diameter\u003c\/li\u003e\n\u003cli\u003eCNC-milled quick-release dovetail for precise return-to-zero alignment\u003c\/li\u003e\n\u003cli\u003eModular design allows for low-profile mounting or red-dot finder adaptation\u003c\/li\u003e\n\u003cli\u003eIncluded Baader Standard Base fits telescope tubes from 100mm to 400mm\u003c\/li\u003e\n\u003cli\u003eDoubles as a sturdy carrying handle for your telescope\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Multipurpose Finder Bracket MQR IV 7x50 (max 72mm)\u003c\/h2\u003e\n\u003cp\u003eThe Baader Multipurpose Finder Bracket MQR IV is engineered for absolute alignment stability, accommodating finder tubes up to 72mm in diameter. Its CNC-milled construction and precision dovetail ensure your finder returns to the exact same position every time, eliminating the need for realignment after transport. This bracket's robust build is so reliable it can also serve as a secure carrying handle for your telescope, fitting a wide range of tubes from 100mm to 400mm with the included base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCNC-Milled for Repeatable Pointing Accuracy\u003c\/h3\u003e\n\u003cp\u003eUnlike cheaper brackets that flex or lose alignment, the MQR IV is built around a sturdy, quick-release dovetail system. This design guarantees that the optical axis remains constant, allowing you to remove your finderscope for storage and reattach it with precision down to a hundredth of a millimeter. This return-to-zero capability saves critical time during setup, ensuring your pointing is as accurate at the end of the night as it was at the beginning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eModular Design for Guidescopes and Red-Dot Finders\u003c\/h3\u003e\n\u003cp\u003eThe MQR IV adapts to your specific needs through its configurable, multi-part design. For a lower profile, you can remove the 70mm high center piece and attach the dovetail directly to the finder ring base plate. This versatility extends to red-dot finders; by removing the upper mounting plate, the V-channel at the top of the center piece accepts any red dot finder using the common 11mm Weaver gun rail standard, such as Baader's SkySurfer series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBroad Compatibility with Vixen, Celestron \u0026amp; Synta Standards\u003c\/h3\u003e\n\u003cp\u003eEngineered for maximum flexibility, the MQR IV's dovetail rail fits directly into the existing finder bases on most telescopes from Vixen, Celestron, Synta, and others, often without needing the Baader base. For telescopes without a compatible shoe, the included Baader Standard Base provides a secure mounting point on any optical tube with a diameter between 100mm and 400mm, making this a near-universal solution for finders, guidescopes, and tele-objective lenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat makes the Baader MQR IV finder bracket superior to less expensive options?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader MQR IV's primary advantage is its \u003cstrong\u003eCNC-milled construction\u003c\/strong\u003e and \u003cstrong\u003eprecision dovetail\u003c\/strong\u003e. This ensures a rigid, flex-free connection and allows you to remove and reinstall your finder without losing alignment—a feature known as \"return-to-zero\" that cheaper, cast-metal brackets cannot reliably offer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader MQR IV as a handle for my Celestron SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The mechanical design is exceptionally solid and is intended to double as a secure, removable handle for your telescope. This makes carrying and mounting heavier optical tubes like an 8\" or 9.25\" Schmidt-Cassegrain much safer and easier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow can I mount my guidescope closer to the tube with the MQR IV?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader MQR IV is modular. You can achieve a lower-profile setup by removing the 70mm central riser piece. The guidescope rings can then be attached directly to the base plate, and the dovetail can be mounted directly to that assembly, minimizing the distance to the main telescope tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Baader MQR IV compatible with red-dot finders like the SkySurfer V?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. By removing the top mounting plate with the finder rings, you expose a V-channel on the center piece. This channel is designed to accept red-dot finders that use the standard 11mm Weaver-style gun rail, including the Baader SkySurfer III and SkySurfer V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the MQR IV dovetail fit the stock finder shoe on my Vixen refractor?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, in most cases. The dovetail on the MQR IV is designed to be compatible with the standard finder bases supplied on many telescopes from \u003cstrong\u003eVixen, Celestron, and Synta\u003c\/strong\u003e. This allows you to mount the bracket directly to your telescope without using the included Baader Standard Base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is a quick-release system important for a finder bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA quick-release system like the one on the MQR IV allows for easy and safe transport of your equipment. You can remove the finderscope—often one of the more fragile components—and store it separately, then reattach it at your observing site in seconds without needing to realign it with your main telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Finder Diameter\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting System\u003c\/td\u003e\n\u003ctd\u003eQuick-Release Dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Compatibility\u003c\/td\u003e\n\u003ctd\u003eVixen, Celestron, Synta finder shoes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Base Compatibility\u003c\/td\u003e\n\u003ctd\u003eTelescope tubes from 100mm to 400mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCNC-milled aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader MQR IV Finder Bracket\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Standard Base\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eM5x12 Screws\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_MQR_III_and_MQR_IV_Finder_Bracket_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium MQR III and MQR IV Finder Bracket Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366459677,"sku":"BAA-2457030","price":149.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader-Multipurpose-Finder-Bracket-MQR-IV-7x50-max-72mm-1__35792.1597111013.1280.1280.jpg?v=1684341447"},{"product_id":"baader-sky-surfer-iii-30mm-red-dot-finder","title":"Baader Sky Surfer III 30mm Red Dot Finder","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eZero-Magnification Red Dot Finder\u003c\/li\u003e\n\u003cli\u003eHigh-Transmission Anti-Reflection Coatings\u003c\/li\u003e\n\u003cli\u003eDual-Use Housing for Solar Alignment\u003c\/li\u003e\n\u003cli\u003eUniversal Mounting System Compatibility\u003c\/li\u003e\n\u003cli\u003eIntegrated Dew Shield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Sky Surfer III 30mm Red Dot Finder\u003c\/h2\u003e\n\u003cp\u003eThe Baader Sky Surfer III 30mm Red Dot Finder is a zero-magnification aiming device engineered for rapid, intuitive target acquisition. Its high-quality optical coatings reveal fainter guide stars compared to standard finders, simplifying star-hopping. A unique, double-length housing integrates a safe, simple solar finder for rough alignment by casting a shadow, making it a versatile tool for both night and day observing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBaader Sky Surfer III: Coated Optics for Brighter Star Fields\u003c\/h3\u003e\n\u003cp\u003eUnlike basic finders with uncoated glass, the Sky Surfer III features high-quality coatings on its optical window. This increases light transmission and reduces reflections, allowing you to see fainter stars directly through the viewing window. For the visual observer, this means more reference stars are visible for navigating to faint galaxies and nebulae.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Mounting for Telescopes, Binoculars, and Spotting Scopes\u003c\/h3\u003e\n\u003cp\u003eThe Sky Surfer III is designed for maximum compatibility across different instrument types. Its base slides onto a variety of dovetail adapters, allowing it to be mounted on virtually any telescope, spotting scope, or even a large pair of astronomy binoculars. This adaptability makes it a single finder solution you can move between all your optical instruments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eIntegrated Solar Finder for Safe Sun Alignment\u003c\/h3\u003e\n\u003cp\u003eA standout feature of the Sky Surfer III is its dual-purpose housing. The extended tube is not just a dew shield; it's also an effective and safe solar finder. Instead of looking through the finder, you simply position your telescope until the shadow cast by the front of the housing is perfectly centered on the rear plate. This provides a quick and completely safe way to get the Sun in the field of view of a properly filtered telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Baader Sky Surfer III help locate faint objects without magnification?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Sky Surfer III uses high-quality optical coatings that increase light transmission. This allows you to see fainter stars through the finder's window, providing more reference points for star-hopping to difficult targets, even though it is a zero-power, non-magnifying device.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount the Baader Sky Surfer III on my binoculars or spotting scope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Baader Sky Surfer III is designed with a versatile mounting system that allows it to be adapted to most telescopes, spotting scopes, and even large astronomy binoculars using various available mounting bases. This makes it one of the most adaptable finders available.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the solar finder feature on the Sky Surfer III work?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Sky Surfer III features a unique double-length housing. For solar observing, you do not look through it. Instead, you align your telescope so the shadow cast by the finder's tube is perfectly centered on its rear opening. This provides a simple and safe method for rough alignment on the Sun without looking at it directly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm trying to align my Lunt solar telescope. How does the Sky Surfer III make this process safer?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAligning a dedicated solar telescope like a Lunt requires pointing it directly at the Sun, which can be difficult. The Baader Sky Surfer III's integrated solar finder removes the guesswork. By simply centering the shadow of the finder's housing, you can get the Sun into the field of view of your main telescope without ever needing to look in its direction, ensuring a safe starting point for solar observation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Baader Sky Surfer III work well for star-hopping with my 10-inch Dobsonian?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. A 10-inch Dobsonian has a narrow field of view, making a zero-magnification finder essential. The Sky Surfer III projects a red dot onto the sky, allowing you to keep both eyes open and easily point the telescope towards constellations. Its coated optics help you see dimmer stars to navigate complex star-hops to objects like the galaxies in the Virgo Cluster (M84, M86).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the Sky Surfer III over a basic red dot finder?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader Sky Surfer III offers several key advantages. Its advanced optical coatings provide a brighter view of the sky, making fainter stars visible. It includes an integrated dew shield to protect the optics from moisture. Most uniquely, its housing is designed to double as a safe, effective solar finder for daytime use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_III_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer III Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366525213,"sku":"BAA-2957300","price":66.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader-Sky-Surfer-III-30mm-Red-Dot-Finder-1__78375.1597111017.1280.1280.jpg?v=1684341188"},{"product_id":"baader-sky-surfer-iii-adapter-for-binoculars","title":"Baader Sky Surfer III  Adapter for Binoculars","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdapts Baader Sky Surfer III to Binoculars\u003c\/li\u003e\n\u003cli\u003eMounts to Standard 1\/4\"-20 Tripod Sockets\u003c\/li\u003e\n\u003cli\u003eEnables Intuitive \"Both-Eyes-Open\" Targeting\u003c\/li\u003e\n\u003cli\u003eIdeal for High-Magnification Astronomy Binoculars\u003c\/li\u003e\n\u003cli\u003eLightweight, Minimal-Profile Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Sky Surfer III Adapter for Binoculars\u003c\/h2\u003e\n\u003cp\u003eThe Baader Sky Surfer III Adapter for Binoculars solves the core challenge of aiming high-power binoculars: accurately centering a target you can't see with your naked eye. This simple, robust adapter allows you to mount a Baader Sky Surfer III red-dot finder directly onto the central axis of most porro prism binoculars. It transforms the often-frustrating experience of locating objects into an intuitive, point-and-shoot operation, letting you spend less time searching and more time observing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Center-Axis Mounting for Stable Aiming\u003c\/h3\u003e\n\u003cp\u003eThis adapter is engineered to attach securely to the 1\/4\"-20 threaded socket found on the front of the center hinge of most astronomy binoculars. This mounting point ensures the Sky Surfer III finder is perfectly aligned with the optical axis of your binoculars, providing true zero-power targeting. The result is a stable, unified system where the red dot precisely indicates where your high-magnification view is pointed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eFrom Wide-Field Sweeping to Pinpoint Targeting\u003c\/h3\u003e\n\u003cp\u003eWhile low-power binoculars are easy to aim, larger 15x70 or 25x100 models have a narrow field of view that makes star-hopping difficult. With the Sky Surfer III mounted, you can keep both eyes open to see the finder's red dot projected against the sky. Simply place the dot on your target—be it Jupiter, the Orion Nebula (M42), or a faint star—and it will be waiting in the eyepiece of your binoculars, perfectly centered.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of binoculars is the Baader Sky Surfer III Adapter compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis adapter is designed for most \u003cstrong\u003eporro prism binoculars\u003c\/strong\u003e that feature a standard \u003cstrong\u003e1\/4\"-20 threaded tripod mounting socket\u003c\/strong\u003e at the end of the central hinge. It is generally not compatible with roof prism binoculars or models that lack this specific mounting point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need to own the Baader Sky Surfer III to use this adapter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This is not a standalone product but an adapter plate specifically designed to connect the \u003cstrong\u003eBaader Sky Surfer III red-dot finder\u003c\/strong\u003e (sold separately) to a pair of binoculars. It will not work with other finder models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Sky Surfer III Adapter help me find the Andromeda Galaxy (M31) with my 20x80 binoculars?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFinding a faint, diffuse object like the Andromeda Galaxy (M31) can be difficult with the narrow field of 20x binoculars. With the adapter and finder installed, you can look at the sky with both eyes open, locate the constellation Cassiopeia, and simply place the finder's red dot on the known location of M31. When you look through the binoculars, the galaxy's core will be in the field of view, saving you from sweeping back and forth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this adapter add significant weight or bulk to my binoculars?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the adapter itself is designed to be lightweight and unobtrusive. While it does add the weight of the Sky Surfer III finder, the total added weight is minimal and should not significantly affect the balance or handling of most mid-to-large-sized astronomy binoculars, especially if they are already mounted on a tripod.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader Sky Surfer III adapter on a tripod?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis adapter occupies the same 1\/4\"-20 mounting point used by most binocular tripod adapters (L-brackets). You cannot use both simultaneously. This accessory is primarily intended to improve handheld aiming or for use with specialized binocular mounts that grip the barrels directly, leaving the central hinge free.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the installation of the Sky Surfer III Adapter difficult?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is very simple. First, you attach the Sky Surfer III finder to the adapter plate. Then, you simply screw the entire assembly into the 1\/4\"-20 socket on your binoculars' central hinge, tightening it by hand until it is secure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_III_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer III Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366656285,"sku":"BAA-2957305","price":13.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Sky-Surfer-III-Adapter-for-Binoculars-1__83023.1597111018.1280.1280.jpg?v=1684341465"},{"product_id":"baader-sky-surfer-iii-adapter-for-spotting-scopes","title":"Baader Sky Surfer III  Adapter for Spotting Scopes","description":"\u003cul class=\"DAV-feature-list\"\u003e\n    \u003cli\u003eAdapts Baader Sky Surfer III to Spotting Scopes\u003c\/li\u003e\n    \u003cli\u003eEnables Fast, Intuitive Target Acquisition\u003c\/li\u003e\n    \u003cli\u003eIdeal for Terrestrial and Astronomical Use\u003c\/li\u003e\n    \u003cli\u003eStreamlines Aiming High-Magnification Optics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n    \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n    \u003cli\u003eFAQ\u003c\/li\u003e\n    \u003cli\u003eSpecifications\u003c\/li\u003e\n    \u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n    \u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n    \u003cli class=\"active\"\u003e\n        \u003cdiv\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section-center\"\u003e\n                    \u003ch2\u003eBaader Sky Surfer III Adapter for Spotting Scopes\u003c\/h2\u003e\n                    \u003cp\u003eThe Baader Sky Surfer III Adapter for Spotting Scopes bridges the gap between your high-magnification optics and the intuitive, zero-power aiming of a red dot finder. This custom-fit adapter creates a secure mounting point for the Sky Surfer III, transforming the often-frustrating process of locating a target into a simple, point-and-view operation.\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section\"\u003e\n                    \u003ch3\u003eMount Your Sky Surfer III to Any Spotting Scope\u003c\/h3\u003e\n                    \u003cp\u003eHigh-power spotting scopes excel at detailed observation but their narrow field of view can make initial target acquisition difficult. This adapter solves that problem by allowing you to attach the acclaimed Baader Sky Surfer III red dot finder directly to your scope's body. Once aligned, you simply place the red dot on your distant target—a bird in a tree or the Moon in the sky—and it will be centered in your eyepiece.\u003c\/p\u003e\n                    \u003cp\u003eThis simple accessory eliminates the need to pan and scan, saving valuable time in the field. It's an essential upgrade for birders, nature observers, and casual astronomers who want to spend less time searching and more time observing.\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the Baader Sky Surfer III Adapter for Spotting Scopes?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eThis adapter is designed to create a stable mounting platform for attaching a \u003cstrong\u003eBaader Sky Surfer III red dot finder\u003c\/strong\u003e onto the main body of a spotting scope. This allows for rapid, intuitive aiming of the high-magnification scope.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I mount a Sky Surfer III red dot finder on my spotting scope?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eSpotting scopes have a very narrow field of view, making it difficult to find small or distant objects quickly. A \u003cstrong\u003ezero-magnification red dot finder\u003c\/strong\u003e like the Sky Surfer III allows you to aim with both eyes open, simply placing the dot on your target to bring it into the eyepiece's view. This is significantly faster than sighting along the barrel.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Sky Surfer III Adapter help with locating birds or other wildlife?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eFor wildlife observation, targets often move quickly. The Baader Sky Surfer III Adapter lets you equip your scope with a finder that makes tracking and centering these subjects effortless. You can follow a bird in flight with the red dot and know it will be in your field of view when it lands, a task that is nearly impossible with a high-power eyepiece alone.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader Sky Surfer III Adapter for casual astronomy?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eAbsolutely. When using a spotting scope to view the Moon, bright planets like Jupiter, or star clusters like the Pleiades (M45), this adapter is invaluable. It makes aiming the scope at a specific point in the vast night sky simple and accurate, enhancing your stargazing experience.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this adapter fit any brand of spotting scope?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eThe Baader Sky Surfer III Adapter is designed for broad compatibility with many common spotting scope body types. However, due to the vast number of designs on the market, you should verify that your scope has a suitable flat or gently curved surface for secure attachment. It is not guaranteed to fit every model ever produced.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this adapter to mount finders other than the Baader Sky Surfer III?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eThis adapter is specifically designed to match the mounting footprint of the \u003cstrong\u003eBaader Sky Surfer III\u003c\/strong\u003e. While it may be possible to modify it for other finders, it is not intended or guaranteed to work with finders from other manufacturers.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n        \u003cul class=\"DAV-grid\"\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_III_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer III Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n        \u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n    \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366689053,"sku":"BAA-2957306","price":12.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Sky-Surfer-III-Adapter-for-Spotting-Scopes-1__53326.1597111018.1280.1280.jpg?v=1684341467"},{"product_id":"baader-sky-surfer-v-night-day-design-red-dot-finder","title":"Baader Sky Surfer V (Night \u0026 Day Design) Red-Dot-Finder","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDual-mode Night \u0026amp; Day Red Dot Finder\u003c\/li\u003e\n\u003cli\u003eSafe, zero-magnification solar finder via pinhole projection\u003c\/li\u003e\n\u003cli\u003e11 brightness settings with night-vision-friendly dim modes\u003c\/li\u003e\n\u003cli\u003eIntegrated dew shields and stray light baffles\u003c\/li\u003e\n\u003cli\u003eElevated base for comfortable use on all telescope types\u003c\/li\u003e\n\u003cli\u003eRobust, military-derived construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Sky Surfer V (Night \u0026amp; Day Design) Red-Dot-Finder\u003c\/h2\u003e\n\u003cp\u003eThe Baader Sky Surfer V is a dual-mode system designed for both night sky aiming and safe daytime solar alignment. Its unique pinhole projection system provides a safe way to center the Sun, while its high-contrast optics are significantly brighter than competing finders, preserving faint stars in the field of view. Built to a military standard, its multiple brightness settings include dedicated dim modes to protect your dark adaptation during critical observing sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Brighter View: Preserving Dark Adaptation and Faint Stars\u003c\/h3\u003e\n\u003cp\u003eUnlike repurposed gunsights that can overwhelm your night vision, the Sky Surfer V is engineered specifically for astronomy. It features a range of brightness settings, with the lowest levels being exceptionally dim to ensure the red dot doesn't wash out faint stars or compromise your dark adaptation. The 1:1 objective lens is coated to be non-reflective, delivering a brighter background sky compared to many red dot finders, which makes sighting on faint targets in light-polluted skies much easier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSafe Solar Alignment: A Unique Pinhole Projection System\u003c\/h3\u003e\n\u003cp\u003eThe Sky Surfer V transforms into a safe and effective solar finder by simply closing its lens covers. With the covers snapped shut, a pinhole in the front cover projects an image of the Sun onto a translucent reticle on the rear cover. You can observe this projected solar disk from any angle and center it on the reticle using your mount's controls—all without ever looking through the finder or at the Sun. This projection method is an intuitive and safe way to align your primary telescope for solar observing, provided the main instrument is equipped with a proper solar filter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRugged Design: Integrated Dew Shields and an Elevated Mount\u003c\/h3\u003e\n\u003cp\u003eDerived from a military design, the Sky Surfer V is built to withstand harsh field conditions. It comes fully assembled with integrated dew shields on the front and back, which prevent the lenses from fogging over on damp nights and double as effective stray light shields. The entire unit sits on an elevated mount, providing ample \"face-space\" for comfortable aiming, a critical feature when mounted on the side of a Newtonian optical tube where low-profile finders are often awkward to use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Baader Sky Surfer V work as a solar finder?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader Sky Surfer V uses a safe projection method. With both lens covers closed, a small \u003cstrong\u003epinhole\u003c\/strong\u003e in the front cover projects an image of the Sun onto a \u003cstrong\u003eyellow UV-blocking screen\u003c\/strong\u003e on the rear cover. You simply watch the projected dot of light and move your telescope until the dot is centered on the screen's reticle. This allows you to align on the Sun without looking through the finder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is the Baader Sky Surfer V better for astronomy than a standard rifle red-dot sight?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eStandard red-dot sights are often too bright for astronomical use, even on their lowest setting, which can ruin your dark adaptation. The Baader Sky Surfer V has \u003cstrong\u003emultiple dim settings\u003c\/strong\u003e designed specifically for night use. Its optics are also coated for higher light transmission, making the sky background appear brighter and revealing fainter stars than many competing finders.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Baader Sky Surfer V's red dot ruin my dark adaptation?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The Sky Surfer V was designed with dark adaptation in mind. It includes several very dim brightness settings specifically for nighttime astronomical use, ensuring the red dot is visible without overwhelming your night vision or washing out faint guide stars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Baader Sky Surfer V difficult to use on a Newtonian telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, it's actually ideal for Newtonians. The Baader Sky Surfer V comes with an elevated base that raises the finder well above the telescope tube. This provides plenty of \"face-space,\" making it much more comfortable to look through compared to low-profile finders that force you into an awkward position.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader Sky Surfer V to align my telescope for viewing a solar eclipse?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. The solar finder function is perfect for safely aligning your telescope on the Sun for an eclipse. Just remember that the Sky Surfer V is only for \u003cstrong\u003efinding and aligning\u003c\/strong\u003e; your main telescope must be fitted with a certified, full-aperture solar filter (like Baader AstroSolar film) before you point it at the Sun.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat makes the construction of the Baader Sky Surfer V so durable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader Sky Surfer V's design originated for military applications, so it is \"built like a tank.\" It features a robust housing and comes with integrated dew shields and protective flip-up covers, ensuring it can handle the rigors of transport and use in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBatteries\u003c\/td\u003e\n\u003ctd\u003e1 CR2032 (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinderscope\u003c\/td\u003e\n\u003ctd\u003eIlluminated, 2 MOA (minute of arc) Red Dot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnification (x)\u003c\/td\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObjective Lenses\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e210 mm (8.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWaterproof\u003c\/td\u003e\n\u003ctd\u003eWaterresistant and Fogproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_V_Red-Dot_Finder_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer V Red-Dot Finder Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366885661,"sku":"BAA-2957315","price":212.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader-Sky-Surfer-V-Night-Day-Design-Red-Dot-Finder-1__25375.1597111022.1280.1280.jpg?v=1684341469"},{"product_id":"baader-vario-finder-erect-image-finder-scope","title":"Baader Vario-Finder Erect Image Finder Scope","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eErect-image optical design for intuitive aiming\u003c\/li\u003e\n\u003cli\u003eFunctions as a high-quality, straight-through finderscope\u003c\/li\u003e\n\u003cli\u003eAccepts standard eyepieces for variable magnification (eyepieces not included)\u003c\/li\u003e\n\u003cli\u003eDoubles as a compact guide scope for autoguiding\u003c\/li\u003e\n\u003cli\u003eAvailable with an optional MQR-IV Quick Release finder bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Vario-Finder Erect Image Finder Scope\u003c\/h2\u003e\n\u003cp\u003eThe Baader Vario-Finder Erect Image Finder Scope is a versatile optical tool designed to solve the fundamental challenge of aiming your telescope accurately. By presenting a correctly oriented, non-reversed image, it mirrors the view seen by the naked eye or through binoculars, eliminating the mental gymnastics required with standard finders. This makes star-hopping from a chart to the eyepiece a direct and intuitive process, whether you're locating a faint galaxy or centering a planet for high-resolution imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCorrect-Image Orientation for Intuitive Aiming\u003c\/h3\u003e\n\u003cp\u003eUnlike standard astronomical finders that show a reversed or upside-down view, the Vario-Finder's erect-image amici prism delivers a view that is correctly oriented both up-down and left-right. This is a critical feature for terrestrial viewing and makes navigating the night sky significantly easier, especially for beginners. The view through the finder matches your star chart, allowing you to move the telescope in the direction you intend without second-guessing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Attachment with the Optional MQR-IV Bracket\u003c\/h3\u003e\n\u003cp\u003eThe Vario-Finder is available with the robust Baader MQR-IV Quick Release finder bracket. This component ensures a rigid, flexure-free connection to your main telescope, maintaining precise alignment throughout an observing session. The quick-release mechanism allows you to attach and detach the finder scope in seconds without tools, preserving your alignment for the next session and simplifying setup and transport.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat does \"Vario-Finder\" mean for the Baader finder scope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \"Vario\" designation indicates that the finder's magnification is variable. This is achieved by using standard astronomical eyepieces (sold separately). You can insert a long focal length eyepiece for a wide, low-power field of view to locate objects, then swap to a shorter focal length eyepiece for higher power to precisely center the object in your main telescope's field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Baader Vario-Finder's erect image help with finding objects like the Andromeda Galaxy (M31)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhen star-hopping to the Andromeda Galaxy (M31) from the star Mirach, an erect-image view is a significant advantage. The pattern of stars you see in the finder will exactly match the orientation on your star chart or app. If you need to move your telescope \"up and to the left\" to find M31, you physically move the scope up and to the left, eliminating the confusion caused by mirror-reversed or inverted images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader Vario-Finder as a guide scope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Vario-Finder is optically sharp enough to serve as a compact guide scope. By removing the eyepiece and prism, you can attach a small-chip autoguiding camera (like a ZWO ASI120MM Mini) to the focuser. This makes it a dual-purpose tool, saving weight and space on your imaging setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Baader Vario-Finder suitable for terrestrial daytime viewing?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. Because it provides a correctly oriented image, the Vario-Finder functions as an excellent, high-quality spotting scope for daytime use. You can use it for bird watching, landscape viewing, or any other terrestrial application where you need a magnified, sharp image.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Baader Vario-Finder fit the finder shoe on my Celestron 8\" SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIf you purchase the Vario-Finder with the MQR-IV Quick Release Finder Bracket, it is designed to be compatible with a wide range of finder shoes, including the standard Vixen\/Synta-style base found on most Celestron, Sky-Watcher, and Orion telescopes. The MQR-IV provides a secure and stable fit for these common mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat eyepieces do I need for the Baader Vario-Finder?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader Vario-Finder is designed to accept standard 1.25\" astronomical eyepieces. Eyepieces are not included with the standard finder. A good starting combination would be a low-power eyepiece (around 25mm) for a wide field of view and a higher-power eyepiece (around 10mm) with an illuminated reticle for precise centering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Options\u003c\/td\u003e\n\u003ctd\u003eStandard Supply, or with included MQR-IV Finder Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.88 (Standard Supply)\u003cbr\u003e1.66 (include MQR-IV Finder Holder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Standard Supply","offer_id":44967367213341,"sku":"BAA-2957460","price":459.0,"currency_code":"CAD","in_stock":true},{"title":"include MQR-IV Finder Holder","offer_id":44967367246109,"sku":"BAA-2957465","price":532.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Vario-Finder-Erect-Image-Finder-Scope-1__46162.1597111024.1280.1280.jpg?v=1684341224"},{"product_id":"baader-planetarium-universal-red-dot-mount-rdm","title":"Baader Planetarium Universal Red Dot Mount RDM","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdapts 11mm Weaver-rail finders to standard Vixen\/Synta-style finder shoes\u003c\/li\u003e\n\u003cli\u003e70mm riser height for comfortable head positioning\u003c\/li\u003e\n\u003cli\u003eDurable all-metal construction\u003c\/li\u003e\n\u003cli\u003eFits Celestron, Sky-Watcher, Vixen, and Bresser finder bases\u003c\/li\u003e\n\u003cli\u003eRemovable base for custom mounting applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUniversal Red Dot Mount RDM\u003c\/h2\u003e\n\u003cp\u003eThe Universal Red Dot Mount RDM solidly adapts any red dot finder using the common 11mm Weaver standard rail for use on astronomical telescopes. Its 70mm riser height provides critical clearance and comfortable head positioning, solving a common ergonomic problem, especially for observers using Newtonian reflectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBridge the Gap: Mount 11mm Weaver-Rail Finders on Your Telescope\u003c\/h3\u003e\n\u003cp\u003eThis mount is the essential link between the widely available red dot finders designed for the 11mm Weaver rail standard and the Vixen\/Synta-style dovetail shoe found on most modern telescopes. Constructed from sturdy metal, it provides a secure, flex-free platform for your finder scope. The V-shaped base slides directly into the finder shoe on telescopes from Celestron, Sky-Watcher, Vixen, and Bresser, allowing you to use a high-quality terrestrial red dot sight for astronomical aiming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e70mm Riser Height for Comfortable Sighting on Any OTA\u003c\/h3\u003e\n\u003cp\u003eThe mount's 70mm height is a deliberate ergonomic choice. This elevation creates effective \"face-space,\" lifting the finder away from the main optical tube. For Newtonian users, this means you no longer have to press your cheek against a cold telescope tube to align your eye, while for SCT or refractor users, it provides clearance over diagonals and focusers. The V-shaped base can also be removed, allowing the rail section to be mounted directly to custom platforms for specialized imaging rigs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary purpose of the Universal Red Dot Mount RDM?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Universal Red Dot Mount RDM is designed to bridge two different mounting standards. It allows you to attach a red dot finder that uses an \u003cstrong\u003e11mm Weaver-style rail\u003c\/strong\u003e onto an astronomical telescope equipped with a standard \u003cstrong\u003eVixen, Sky-Watcher, or Celestron-style dovetail finder shoe\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Universal Red Dot Mount RDM fit my Sky-Watcher telescope's finder shoe?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The V-shaped dovetail base is designed for a universal fit with the finder-shoes on most telescopes from major brands, including \u003cstrong\u003eSky-Watcher, Celestron, Vixen, and Bresser\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is the 70mm height of the Universal Red Dot Mount RDM important for a Newtonian reflector?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003e70mm riser\u003c\/strong\u003e provides essential \"face-space,\" lifting the red dot finder away from the telescope tube. On a Newtonian, this prevents you from having to press your head uncomfortably against the optical tube to look through the finder, making aiming much easier and more intuitive.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a non-astronomy red dot sight with the Universal Red Dot Mount RDM?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, that is its main function. Any red dot sight that mounts to the common \u003cstrong\u003e11mm Weaver gun rail standard\u003c\/strong\u003e can be attached to the RDM and used as a finder scope on your astronomical telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I mount the Universal Red Dot Mount RDM if my telescope doesn't have a Vixen-style finder shoe?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Universal Red Dot Mount RDM is modular. The \u003cstrong\u003eV-shaped base part can be removed\u003c\/strong\u003e, allowing you to mount the upper rail section directly onto a custom or third-party flat platform using your own hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Universal Red Dot Mount RDM a good choice for my Celestron 8\" SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, it's an excellent choice. A Celestron 8\" SCT uses a standard finder shoe that is compatible with the RDM's V-shaped base. The \u003cstrong\u003e70mm height\u003c\/strong\u003e will place the red dot finder well above the back of the telescope, making it easy to sight along the tube without interference from diagonals or other accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail Type\u003c\/td\u003e\n\u003ctd\u003eWeaver Standard (11mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Type\u003c\/td\u003e\n\u003ctd\u003eVixen\/Synta-style Dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRiser Height\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eFits most Celestron, Sky-Watcher, Vixen, Bresser finder shoes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product consists of a single mounting bracket. No additional items are included.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo downloads are available for this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":52913210753309,"sku":"BAA-2457010","price":54.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/BaaderPlanetarium-Universal-Red-Dot-Mount-RDM-1_cb63361c-f394-4c59-be74-896ce36801db.jpg?v=1789088216"},{"product_id":"baader-planetarium-sky-surfer-iii-flat-base-adapter-made-of-abs","title":"Baader Planetarium Sky Surfer III – Flat base adapter made of ABS","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdapts Sky Surfer III for flat-surface mounting\u003c\/li\u003e\n\u003cli\u003eEnables use on square tube telescopes and mounting rings\u003c\/li\u003e\n\u003cli\u003eConstructed from durable, lightweight ABS polymer\u003c\/li\u003e\n\u003cli\u003eProvides a stable platform for your red dot finder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eSky Surfer III – Flat base adapter made of ABS\u003c\/h2\u003e\n      \u003cp\u003eThe Baader Sky Surfer III Flat Base Adapter is the essential component for mounting your red dot finder onto telescopes or accessories that lack a standard curved saddle. Constructed from rugged ABS polymer, this adapter provides a solid, flat interface, expanding the compatibility of your Sky Surfer III to include square-tube Dobsonians, large tube rings, or custom mounting plates.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eUniversal Flat-Surface Mounting for the Sky Surfer III\u003c\/h3\u003e\n      \u003cp\u003eMany finderscopes assume a mounting shoe on a curved optical tube. This adapter solves the problem for any setup with a flat mounting point. It allows you to securely attach your Sky Surfer III finder, which typically uses a Vixen\/Synta-style foot, to surfaces where a standard finder base won't work.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSquare-Tube Telescopes:\u003c\/strong\u003e Ideal for truss-tube or solid-tube Dobsonians that have flat-sided upper cages or mirror boxes.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eCamera Mounting:\u003c\/strong\u003e Can be adapted for use on DSLR hot-shoe adapters or camera cage systems for wide-field aiming.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTube Rings and Plates:\u003c\/strong\u003e Mounts directly onto the flat top of a telescope tube ring or a universal dovetail plate, placing your finder in a convenient, accessible position.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n    \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eLightweight and Durable ABS Construction\u003c\/h3\u003e\n      \u003cp\u003eThe adapter is manufactured from Acrylonitrile Butadiene Styrene (ABS), a thermoplastic polymer chosen for its balance of strength and low weight. This ensures the adapter adds minimal weight to your optical assembly, preventing balance issues, especially on smaller telescopes.\u003c\/p\u003e\n       \u003cp\u003eThe material is rigid enough to hold the finder securely without flexure, maintaining pointing accuracy, while also being less likely to scratch the finish of your telescope compared to a metal adapter.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I attach the Sky Surfer III Flat Base Adapter to my telescope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe adapter is designed to be secured to a flat surface using standard screws (not included). You will need to drill holes in your telescope tube or mounting plate that align with the holes on the adapter. The specific screws required will depend on the material and thickness of the surface you are mounting to.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this adapter to mount the Sky Surfer III on my 8\" Dobsonian's square upper cage?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, this is an ideal application. The flat base of the adapter is designed specifically for surfaces like the flat wooden or composite panels of a square-tube Dobsonian's upper tube assembly, providing a much more secure fit than a standard curved base.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Sky Surfer III adapter compatible with finders other than the Baader Sky Surfer III?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis adapter is specifically designed to accept the dovetail foot of the \u003cstrong\u003eBaader Sky Surfer III\u003c\/strong\u003e. While it may fit other red dot finders that use a Vixen\/Synta-style finder foot, compatibility is not guaranteed, and the fit may not be as secure.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is the Sky Surfer III adapter made of ABS instead of aluminum?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eUsing \u003cstrong\u003eABS plastic\u003c\/strong\u003e offers several advantages for this application. It significantly reduces the weight of the part, which helps maintain the balance of your telescope. It is also corrosion-resistant and less likely to mar the finish of your equipment than a metal part.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Sky Surfer III Flat Base Adapter come with mounting screws?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, mounting hardware is not included. The type of screws needed varies widely depending on whether you are attaching it to a metal tube, a wooden Dobsonian box, or a composite plate, so you must source the appropriate hardware for your specific setup.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan this adapter be used to mount a Sky Surfer III on a camera hot shoe?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNot directly. While this adapter provides the necessary flat surface, you would still need a separate hot-shoe-to-flat-plate adapter to connect it to a DSLR or mirrorless camera. This adapter's primary purpose is for direct mounting to a telescope or accessory plate.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS (Acrylonitrile Butadiene Styrene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Type\u003c\/td\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eBaader Sky Surfer III Red Dot Finder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eSky Surfer III Flat Base Adapter\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_III_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer III Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":52913213309213,"sku":"BAA-2957302","price":10.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/BaaderPlanetarium-Sky-Surfer-III-Flat-base-adapter-made-of-ABS-1_904a9317-2bf3-459a-9aff-b2afd21f9e3d.jpg?v=1789088264"},{"product_id":"baader-planetarium-sky-surfer-iii-adapter-for-large-telescopes-made-of-abs","title":"Baader Planetarium Sky Surfer III – Adapter for large telescopes made of ABS","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eSecurely mounts the Baader Sky Surfer III finder\u003c\/li\u003e\n\u003cli\u003eDesigned for use on large telescope optical tubes\u003c\/li\u003e\n\u003cli\u003eConstructed from durable, lightweight ABS plastic\u003c\/li\u003e\n\u003cli\u003eProvides a stable base for precise finder alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eSky Surfer III – Adapter for large telescopes made of ABS\u003c\/h2\u003e\n      \u003cp\u003eThis adapter provides a dedicated mounting solution for attaching the Baader Sky Surfer III red dot finder to large telescope optical tubes. Made from tough, lightweight Acrylonitrile Butadiene Styrene (ABS), it creates a stable and secure platform for the finder, ensuring it holds alignment without adding significant weight to your optical assembly.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eSecure Mounting for the Sky-Surfer III on Large Telescopes\u003c\/h3\u003e\n      \u003cp\u003eLarger Schmidt-Cassegrains, Dobsonians, and refractors often have wider, more curved tube surfaces that require a specific adapter for a flush, stable fit. This component is shaped to provide that solid connection, preventing the rocking or instability that can occur when using a standard base on a large-diameter tube.\u003c\/p\u003e\n       \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eABS Construction:\u003c\/strong\u003e The adapter is molded from ABS, a thermoplastic known for its impact resistance and rigidity. This material choice offers a durable, non-marring mounting solution that is significantly lighter than a comparable aluminum part.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eStable Platform:\u003c\/strong\u003e By matching the finder's footprint and accommodating larger tube radiuses, the adapter ensures your Sky Surfer III remains precisely aligned with your main telescope, session after session.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of this Sky Surfer III adapter?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis adapter is designed to create a secure and stable mounting point for a \u003cstrong\u003eBaader Sky Surfer III\u003c\/strong\u003e red dot finder on telescope tubes that are too large or curved for the standard mounting foot to attach securely.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is this Sky Surfer III adapter made of ABS plastic instead of metal?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003e\u003cstrong\u003eABS plastic\u003c\/strong\u003e is used for its excellent balance of strength, impact resistance, and low weight. It provides a rigid and durable platform for the finder without adding unnecessary mass to the telescope, which helps maintain balance and reduces strain on the mount.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if I need this adapter for my telescope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYou likely need this adapter if you have a \u003cstrong\u003elarge telescope\u003c\/strong\u003e, such as a large Dobsonian or an SCT of 10 inches or more, and the included base for your Sky Surfer III does not sit flush against the optical tube. This adapter is specifically made to accommodate wider tube diameters.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this adapter compatible with finders other than the Baader Sky Surfer III?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis adapter is purpose-built specifically for the mounting footprint and hardware of the \u003cstrong\u003eBaader Sky Surfer III\u003c\/strong\u003e. It is not designed for universal compatibility and is unlikely to fit other models of red dot finders without modification.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this adapter fit my 11\" SCT or large Dobsonian?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, this adapter is intended for exactly these types of instruments. It is designed to provide a stable base on the wider, more gently curved surfaces of \u003cstrong\u003elarge SCTs, Newtonians, and Dobsonians\u003c\/strong\u003e where standard finder bases may not make solid contact.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this adapter for the Sky Surfer III include mounting hardware?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eMounting hardware is not specified as being included. Typically, you would use the screws that come with the Sky Surfer III finder itself or existing hardware on your telescope tube. You may need to source appropriate screws depending on your specific telescope's threaded mounting holes.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS (Acrylonitrile Butadiene Styrene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eBaader Sky Surfer III Red Dot Finder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eMounting finder on large telescopes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_III_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer III Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":52913214718237,"sku":"BAA-2957304","price":11.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/BaaderPlanetarium-Sky-Surfer-III-Adapter-for-large-telescopes-made-of-ABS-1_63fd51c7-6865-4560-80fa-8135e95b7a28.jpg?v=1789088274"}],"url":"https:\/\/davidastro.com\/collections\/baader-finder-scopes.oembed","provider":"David Astro","version":"1.0","type":"link"}