{"title":"Cables","description":"\u003cdiv\u003e\n  \u003cp\u003e\n    Cables cause more lost imaging nights than any other component, and almost none of those failures are electrical. Standard PVC cable stiffens dramatically below minus 20 and pulls on the mount, long unpowered USB runs drop connections, and a loop that snags during a meridian flip can damage a focuser. David Astro carries cables in Canada, in stock here and shipped without customs delays for Canadian buyers.\n  \u003c\/p\u003e\n  \u003cp\u003e\n    Length, gauge and cold flexibility are the three specifications that matter. Tell us your rig and we will list what you need.\n  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- more --\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eCabling a Rig That Runs All Night\u003c\/h2\u003e\n  \u003cp\u003e\n    The goal is the shortest possible runs, adequate conductor size, and material that stays flexible at the temperatures you actually observe in.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCold-flexible power cables:\u003c\/strong\u003e Silicone-jacketed and cold-rated cable that stays supple below minus 20, where standard PVC becomes stiff enough to exert real force on the mount.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConductor gauge:\u003c\/strong\u003e Voltage drop scales with length and inversely with cross-section. A thin power lead is a frequent and easily fixed cause of cold-weather mount stalls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUSB cable length:\u003c\/strong\u003e Long unpowered runs are the leading cause of camera disconnections. A mount-top powered hub with short camera cables solves most of them.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector types:\u003c\/strong\u003e Locking and threaded connectors resist vibration and accidental disconnection far better than friction-fit plugs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRight-angle connectors:\u003c\/strong\u003e Reduce the strain radius at the device, which matters where a cable exits a camera on a rotating assembly.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLength discipline:\u003c\/strong\u003e Excess cable is what snags. Cables cut or specified to the actual run length are safer than long ones coiled up.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eWhy Choose David Astro for Cables\u003c\/h2\u003e\n  \u003cp\u003e\n    We troubleshoot enough overnight failures to know that cable choice is not a detail.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCold-rated by default:\u003c\/strong\u003e We recommend cable that stays flexible at Canadian winter temperatures, because stiff cable both snags and drags on the mount.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGauge specified for the run:\u003c\/strong\u003e We size conductors against current and length, which prevents the voltage sag that causes mysterious stalls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLayout advice:\u003c\/strong\u003e We help plan routing and service loops so a meridian flip does not snag anything.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAuthorized dealer:\u003c\/strong\u003e Genuine products, in Canadian stock, shipped domestically.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNo cross-border fees:\u003c\/strong\u003e Canadian orders arrive without duties or brokerage charges.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eCables in Canada — Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003e\u003cstrong\u003eWhy does my rig fail in winter but not summer?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eTwo reasons, both cable-related: stiff cable exerts force on the mount, and higher current draw plus a thin or long power lead drops voltage below the mount's tolerance.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eHow long can a USB cable be?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eShorter than most people run. Keep camera cables under a couple of metres to a powered hub on the mount, and take the longer run from the hub to the computer.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eWhat gauge power cable do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eThicker than it seems. Voltage drop rises with length and current, and dew heaters plus a mount can draw considerably. Tell us your loads and run length and we will specify.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eHow do I stop cables snagging?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eUse the shortest cables that reach, route them along the tube and mount rather than hanging free, and leave a deliberate service loop that takes up slack during a meridian flip.\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eCabling for winter?\u003c\/h2\u003e\n  \u003cp\u003eTell us your rig and run lengths and we will specify cable and routing. In Canadian stock, shipped worldwide.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"celestron-car-battery-adapter-for-all-nexstars","title":"Celestron Car Battery Adapter (for all NexStars)","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePowers any Celestron computerized telescope from a car battery\u003c\/li\u003e\n\u003cli\u003e25-foot cord provides ample reach\u003c\/li\u003e\n\u003cli\u003eStandard cigarette lighter plug\u003c\/li\u003e\n\u003cli\u003e5.5mm\/2.1mm barrel connector with tip-positive polarity\u003c\/li\u003e\n\u003cli\u003eEssential for dark sky observing sites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron Car Battery Adapter (for all NexStars)\u003c\/h2\u003e\n\u003cp\u003ePower your Celestron computerized telescope from any 12V DC source with the Celestron Car Battery Adapter, featuring a 25-foot cord for maximum setup flexibility. This essential accessory connects your telescope's 12V input jack directly to a car's cigarette lighter socket or a portable power pack, ensuring you have reliable power at remote dark sky sites where AC outlets are unavailable. The adapter uses a standard 5.5mm outer diameter and 2.1mm inner diameter barrel connector with tip-positive polarity, making it the standard power solution for a wide range of Celestron mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e25-Foot Cord for Remote 12V DC Power\u003c\/h3\u003e\n\u003cp\u003eThe primary challenge of remote observing is sourcing reliable power. This adapter solves the problem by allowing you to connect your telescope directly to your vehicle's battery or a portable 12V power supply like a Celestron PowerTank. The generous 25-foot cord length gives you the freedom to position your telescope well away from your vehicle, minimizing stray light and vibrations while maintaining a secure power connection throughout the night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Compatibility for Celestron Computerized Mounts\u003c\/h3\u003e\n\u003cp\u003eDesigned for broad compatibility, this car battery adapter is the definitive power solution for most modern Celestron computerized telescopes. It ensures you can power your equipment without worrying about proprietary connectors or insufficient cord length. If your telescope uses a 12V DC input jack with a 5.5mm\/2.1mm tip-positive barrel, this adapter will provide the necessary power.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Mounts:\u003c\/strong\u003e The adapter is confirmed to work with the NexStar SLT, NexStar GT, CGEM, CPC, CPC Deluxe, and Advanced VX series of telescopes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Connector:\u003c\/strong\u003e The power plug inserts into any standard car cigarette lighter outlet, making it a universal tool for field astronomy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this adapter power my Celestron Advanced VX mount all night from my car?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the Celestron Car Battery Adapter is designed to power an Advanced VX mount. However, the duration depends on the health and capacity of your car's battery. To avoid draining your vehicle's starting battery, many observers prefer using a dedicated portable 12V DC power pack, like a Celestron PowerTank, which this adapter also plugs into.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm taking my NexStar 8SE to a dark sky site. Is the Car Battery Adapter the only power accessory I need?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIf you plan to power your NexStar 8SE (part of the NexStar SLT family) from your car or a portable 12V battery with a cigarette lighter port, this 25-foot adapter is the correct and only cable you need to connect the two. It provides the necessary length and the correct barrel connector for the mount's power input jack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the dimensions of the barrel connector on the Celestron Car Battery Adapter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe adapter uses a barrel connector with an outside diameter of 5.5mm and an inner diameter of 2.1mm. It has a \"tip positive\" polarity, which is the standard for all compatible Celestron telescopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 25-foot cord long enough for most observing situations?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 25-foot cord provides substantial reach, allowing you to set up your telescope a safe distance from your vehicle. This helps prevent accidental bumps, reduces interference from car lights or heat, and gives you more freedom in choosing the best observing spot at your location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this adapter with a non-Celestron telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile designed for Celestron mounts, this adapter may work with other telescopes if they meet three criteria: 1) they require 12V DC power, 2) they use a power input jack that accepts a 5.5mm\/2.1mm barrel connector, and 3) they require tip-positive polarity. Using an adapter with incorrect specifications can damage your equipment, so always verify your telescope's power requirements before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this adapter a better option than a portable battery pack?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis adapter is a tool to connect your telescope to a 12V power source, not a source itself. It is the perfect accessory to use with a portable battery pack (like a PowerTank) or your car's battery. The choice between using your car or a separate power pack depends on your risk tolerance for draining the car battery versus the convenience of carrying a dedicated supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Length\u003c\/td\u003e\n\u003ctd\u003e25 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Connector\u003c\/td\u003e\n\u003ctd\u003eStandard Cigarette Lighter Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connector\u003c\/td\u003e\n\u003ctd\u003e5.5mm OD \/ 2.1mm ID Barrel Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eTip Positive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Series\u003c\/td\u003e\n\u003ctd\u003eNexStar SLT, NexStar GT, CGEM, CPC, CPC Deluxe, Advanced VX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCar Battery Adapter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967188988189,"sku":"CEL-18769","price":43.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-Car-Battery-Adapter-for-all-NexStars-18769-1__00721.1594230532.1280.1280.jpg?v=1684338285"},{"product_id":"pegasus-adapter-2-1-x-5-5mm-female-to-gx12-for-nyx-101","title":"Pegasus Adapter 2.1 x 5.5mm female to GX12 (For NYX-101)","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects standard 2.1mm x 5.5mm power sources to GX12 inputs\u003c\/li\u003e\n\u003cli\u003eDesigned for Pegasus Astro NYX-101 and NYX-88 mounts\u003c\/li\u003e\n\u003cli\u003eRated for a maximum current of 10A\u003c\/li\u003e\n\u003cli\u003e0.3m (1ft) length for strain relief and cable management\u003c\/li\u003e\n\u003cli\u003eSecure, locking GX12-2 connector prevents accidental disconnection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePegasus Astro 2.1x5.5mm to GX12 Adapter Cable\u003c\/h2\u003e\n\u003cp\u003eThis purpose-built adapter cable converts a standard female 2.1mm x 5.5mm DC input to a secure GX12-2 male connector, delivering up to 10A of current over its 0.3m (1ft) length. It is the essential accessory for reliably powering your Pegasus Astro NYX-101 or NYX-88 mount from a common astronomy power supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure 10A Power for NYX Mounts\u003c\/h3\u003e\n\u003cp\u003eThe primary advantage of this cable is its locking GX12 connector, which forms a robust, vibration-resistant link to the mount's power port that cannot be accidentally pulled out. This is a critical upgrade over standard DC barrel connectors that can easily disconnect during a slew or due to cable drag, ruining an imaging session. The cable is rated to handle a maximum current of 10A, ensuring your mount receives stable power under heavy loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePurpose-Built for the NYX-101 and NYX-88\u003c\/h3\u003e\n\u003cp\u003eThis is not a generic adapter; it is specifically designed by Pegasus Astro for their NYX-101 and NYX-88 harmonic drive mounts. The 0.3m (1ft) length is intentionally chosen to provide a compact connection point, allowing you to manage cables neatly at the mount head without excess slack. It bridges the gap between your mount and power sources like the Ultimate Powerbox or Pocket Powerbox, which typically feature standard 2.1mm x 5.5mm outlets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Pegasus 2.1x5.5mm to GX12 adapter cable for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is designed to connect a power supply that has a standard 2.1mm x 5.5mm male barrel plug to a device that requires a GX12-2 input, specifically the Pegasus Astro NYX-101 and NYX-88 mounts. It allows you to use common 12V power sources with these high-end mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this GX12 adapter with mounts other than the NYX-101 or NYX-88?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile the GX12-2 connector is a standard part, this cable is only verified for use with the Pegasus Astro NYX-101 and NYX-88 mounts. Using it with other devices is not recommended, as pinout configurations and power requirements can vary, potentially causing damage to your equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy does the Pegasus NYX mount use a GX12 connector?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe GX12 is a locking, industrial-style connector that provides a much more secure physical connection than a standard DC barrel plug. This prevents accidental power loss from cable snags or movement, which is critical for maintaining tracking and GoTo accuracy during an astrophotography session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 0.3m length of this adapter cable long enough?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 0.3m (1ft) length is intentionally short. It is designed to act as a \"pigtail\" adapter that connects your main power cable to the mount. This minimizes cable slack right at the mount head, reducing the risk of snags as the mount rotates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this cable work with my Pegasus Pocket Powerbox?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. Pegasus Astro power distribution hubs like the Pocket Powerbox, Ultimate Powerbox, and Saddle Powerbox all use standard 2.1mm x 5.5mm 12V outputs. This adapter is the perfect interface between those outputs and the GX12 input on a NYX-101 or NYX-88 mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the maximum current this adapter cable can handle?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe adapter cable is rated for a \u003cstrong\u003emaximum current of 10A\u003c\/strong\u003e. This is more than sufficient to power the NYX series mounts and their connected accessories under full load.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Connector\u003c\/td\u003e\n\u003ctd\u003eFemale 2.1mm x 5.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connector\u003c\/td\u003e\n\u003ctd\u003eGX12-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Current\u003c\/td\u003e\n\u003ctd\u003e10A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.3m \/ 1ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e2.1x5.5mm to GX12 Adapter Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/pegasusastro.com\/download\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/pegasus-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePegasus Astro 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":47515934982429,"sku":"PEG-ADAPT-21GX12","price":26.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PEG-ADAPT-21GX12.jpg?v=1706208283"},{"product_id":"zwo-usb2-0-cable-0-5m","title":"ZWO USB2.0 Cable - 0.5m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n    \u003cli\u003e0.5-meter (1.64 ft) length to minimize cable drag and snags\u003c\/li\u003e\n    \u003cli\u003eUSB 2.0 Type-A to Type-B connectors\u003c\/li\u003e\n    \u003cli\u003eReliable data transfer for guide cameras and accessories\u003c\/li\u003e\n    \u003cli\u003eDurable, flexible round cable design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n    \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n    \u003cli\u003eFAQ\u003c\/li\u003e\n    \u003cli\u003eSpecifications\u003c\/li\u003e\n    \u003cli\u003eIn the Box\u003c\/li\u003e\n    \u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n    \u003cli class=\"active\"\u003e\n        \u003cdiv\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section-center\"\u003e\n                    \u003ch2\u003eZWO USB 2.0 Cable - 0.5m\u003c\/h2\u003e\n                    \u003cp\u003eThe ZWO USB 2.0 Cable (0.5m) provides a short, reliable connection essential for managing your astrophotography rig. Its 0.5-meter length is specifically chosen to eliminate cable drag and snagging between your guide camera, electronic filter wheel, or focuser and a USB hub mounted on your telescope, ensuring your tracking and guiding remain precise throughout an imaging session. This cable is engineered for a stable, interference-free data connection, preventing dropped frames and connection losses that can ruin a night of imaging.\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section\"\u003e\n                    \u003ch3\u003eClean Cable Management with a 0.5m Length\u003c\/h3\u003e\n                    \u003cp\u003eA tidy setup is a reliable setup. At just 0.5 meters, this cable is the perfect length for connecting peripherals on your optical tube assembly (OTA) to a nearby USB hub without leaving coils of excess wire. This drastically reduces the risk of cables catching on your mount, tripod, or other equipment as the telescope slews across the sky, a common cause of poor guiding or even equipment damage.\u003c\/p\u003e\n                    \u003cul\u003e\n                        \u003cli\u003e\n\u003cstrong\u003eReduced Cable Drag:\u003c\/strong\u003e The short 0.5m length prevents the cable from pulling on your equipment, which can introduce tracking errors.\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cstrong\u003eSnag-Free Operation:\u003c\/strong\u003e Eliminates loops of loose cable that can get caught as the mount moves, providing peace of mind during unattended imaging runs.\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cstrong\u003eOptimized for On-Telescope Hubs:\u003c\/strong\u003e Ideal for connecting a ZWO guide camera or EAF to an ASIAIR or other USB hub mounted on the telescope itself.\u003c\/li\u003e\n                    \u003c\/ul\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section\"\u003e\n                    \u003ch3\u003eReliable Connectivity for Guiding and Accessories\u003c\/h3\u003e\n                    \u003cp\u003eThis is not a generic office supply cable. The ZWO USB 2.0 cable is built to ensure the consistent data flow required for autoguiding and accessory control. The durable, round design enhances flexibility and stability, providing a secure connection that resists the rigors of setup, teardown, and temperature changes in the field. It supports data transfer rates up to 480 Mbps, more than sufficient for the demands of guide cameras and other USB 2.0 astronomy devices.\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the ZWO 0.5m USB 2.0 cable typically used for?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eThis 0.5m cable is primarily used to connect ZWO guide cameras, electronic filter wheels (EFW), or electronic automatic focusers (EAF) to a USB hub or the ASIAIR unit mounted on the telescope. Its short length is ideal for minimizing cable clutter and preventing snags.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this ZWO cable work with cameras from other brands?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eYes, as long as the other device uses a standard USB 2.0 Type-B port for its connection, this cable will function perfectly. It adheres to the universal USB 2.0 standard.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I choose a 0.5m cable instead of a longer one?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eA short 0.5m cable is crucial for effective cable management on a telescope rig. It prevents long, heavy cables from dragging on the mount, which can affect guiding accuracy. It also reduces the risk of the cable catching on the mount or tripod as the telescope moves.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this ZWO cable shielded against interference?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eYes, ZWO cables are designed with quality shielding to reduce electromagnetic interference (EMI). This ensures a stable and reliable data connection, which is critical for preventing lost frames during long exposures or guiding.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this cable provide power to my ZWO guide camera?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eYes, the USB 2.0 connection provides both data transfer and power to low-consumption devices like ZWO's guide cameras (e.g., ASI120MM Mini) and electronic accessories like the EAF and EFW.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003ctable class=\"DAV-specifications\"\u003e\n            \u003ctbody\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eCable Length\u003c\/td\u003e\n                    \u003ctd\u003e0.5 meters (1.64 feet)\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eHost Connector\u003c\/td\u003e\n                    \u003ctd\u003eUSB 2.0 Type-A Male\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eDevice Connector\u003c\/td\u003e\n                    \u003ctd\u003eUSB 2.0 Type-B Male\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eMax Data Rate\u003c\/td\u003e\n                    \u003ctd\u003e480 Mbps\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eDesign\u003c\/td\u003e\n                    \u003ctd\u003eRound, Flexible\u003c\/td\u003e\n                \u003c\/tr\u003e\n            \u003c\/tbody\u003e\n        \u003c\/table\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cul class=\"DAV-grid\"\u003e\n            \u003cli class=\"DAV-grid-item\"\u003e\n                \u003cdiv\u003e\n                    \u003cp class=\"DAV-item-title\"\u003eZWO USB 2.0 Cable - 0.5m\u003c\/p\u003e\n                    \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003ca href=\"https:\/\/davidastro.com\/pages\/zwo-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eZWO 2-Year Limited Warranty\u003c\/a\u003e\n    \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZWO","offers":[{"title":"Default Title","offer_id":48347822850333,"sku":"ZWO-USB2-05M","price":17.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-USB2-05M.jpg?v=1714662620"},{"product_id":"zwo-usb2-0-cable-2m","title":"ZWO USB2.0 Cable - 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e2m (6.6 ft) length for flexible setup\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 for reliable 480 Mbps data transfer\u003c\/li\u003e\n\u003cli\u003eType-A to Type-B connectors for secure hardware links\u003c\/li\u003e\n\u003cli\u003eEngineered for ZWO cameras and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eZWO USB2.0 Cable - 2m\u003c\/h2\u003e\n\u003cp\u003eThe ZWO USB2.0 Cable provides a secure 480 Mbps data link between your ZWO camera or accessories and your control computer. At a length of 2 meters, this cable offers ample reach for most telescope configurations while ensuring the stable connection required for autoguiding or planetary imaging. The USB Type-B connector ensures a firm, reliable fit into your hardware, preventing data dropouts that can interrupt an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Secure 2m Link for Uninterrupted Imaging\u003c\/h3\u003e\n\u003cp\u003eIn astrophotography, a loose connection is a session-killer. This 2m cable is designed with a USB 2.0 Type-B connector that provides a more secure physical connection than smaller USB types, reducing the risk of accidental disconnection from mount movements. The 2-meter length is ideal for connecting guide cameras or filter wheels back to a hub or ASIAIR without creating unnecessary cable drag or clutter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eEssential Compatibility for the ZWO Ecosystem at 480 Mbps\u003c\/h3\u003e\n\u003cp\u003eWhile modern deep-sky cameras require USB 3.0, the 480 Mbps bandwidth of USB 2.0 is the standard for a huge range of essential astronomy accessories. This cable is the official, reliable solution for connecting ZWO guide cameras, planetary imagers, and electronic filter wheels (EFW) that use a USB 2.0 Type-B port. It ensures your devices receive stable power and send uninterrupted data to your capture software.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuide Cameras:\u003c\/strong\u003e Provides a stable connection for consistent guide corrections all night.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlanetary Cameras:\u003c\/strong\u003e Easily handles the 480 Mbps data stream for high-frame-rate planetary, lunar, and solar AVI capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Filter Wheels:\u003c\/strong\u003e Ensures filter change commands are received and executed without failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I use this ZWO USB 2.0 cable instead of a faster USB 3.0 cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMany essential astrophotography devices, such as guide cameras, planetary cameras, and electronic filter wheels, are engineered around the USB 2.0 standard. Their data output does not exceed the \u003cstrong\u003e480 Mbps\u003c\/strong\u003e bandwidth of USB 2.0, and they often use a USB Type-B port for a more secure physical connection. Using a USB 3.0 cable offers no speed benefit for these devices and may not have the correct connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 2m length of the ZWO USB2.0 cable suitable for a fork-mounted SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, a 2-meter (approx. 6.6 ft) cable is generally an excellent length for most telescope setups, including fork-mounted Schmidt-Cassegrain Telescopes (SCTs). It provides enough slack to allow for the full range of motion of the mount without pulling on the camera or computer ports, which is critical for preventing connection drops or equipment damage during a GoTo slew or meridian flip.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this ZWO cable work with non-ZWO astronomy gear?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is a standard USB 2.0 Type-A to Type-B cable. It will work with any astronomy accessory or device from any manufacturer that uses a standard USB Type-B port for its data connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this ZWO cable to connect my ASI120MM Mini guide camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The ZWO ASI120MM Mini uses a USB-C style connector on the camera body. This cable is designed for ZWO cameras and accessories that feature the larger, square USB 2.0 Type-B port. Always check the port on your specific device before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need a separate power cable for my ZWO filter wheel when using this USB cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor most ZWO electronic filter wheels (EFWs), this USB 2.0 cable provides both data communication and power. No separate power supply is needed for the filter wheel itself, simplifying your cable management.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this ZWO USB2.0 cable shielded to prevent interference?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this ZWO cable is manufactured to the USB 2.0 standard, which includes shielding to protect against radio frequency interference (RFI) and electromagnetic interference (EMI). This ensures a clean, reliable data signal, which is crucial for consistent performance in an electronically noisy environment with multiple devices running.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e2m (6.6 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eUSB Type-A Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eUSB Type-B Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Data Rate\u003c\/td\u003e\n\u003ctd\u003e480 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eZWO Guide\/Planetary Cameras, Filter Wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eZWO USB2.0 Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.zwoastro.com\/software\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/zwo-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eZWO 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZWO","offers":[{"title":"Default Title","offer_id":48347823898909,"sku":"ZWO-USB2-2M","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-USB2-2M.jpg?v=1733321894"},{"product_id":"zwo-usb3-0-cable-2m","title":"ZWO USB3.0 Cable - 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e6.5-foot (2-meter) Length\u003c\/li\u003e\n\u003cli\u003eUSB 3.0 Type B to Type A Connectors\u003c\/li\u003e\n\u003cli\u003eOfficial ZWO Replacement Part\u003c\/li\u003e\n\u003cli\u003eEnsures Full Data Rate for ZWO Cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eZWO USB3.0 Type B Cable - 2m\u003c\/h2\u003e\n\u003cp\u003eThis official ZWO USB3.0 Type B Cable provides a full 6.5-foot (2-meter) connection between your ZWO camera and control computer. The USB 3.0 Type B to Type A interface is engineered specifically to handle the high data rates of modern CMOS sensors, preventing dropped frames during critical imaging runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 6.5-Foot Link for Uninterrupted Data\u003c\/h3\u003e\n\u003cp\u003eAt 6.5 feet (2 meters), this cable offers ample length for most portable and observatory setups, allowing you to position your laptop or ASIAIR without putting strain on your camera's USB port. It's the ideal length to prevent cable snags during tracking while keeping your cable management clean and efficient.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUSB 3.0 Speed for High-Frame-Rate Imaging\u003c\/h3\u003e\n\u003cp\u003eDon't let a faulty or under-spec cable be the bottleneck in your imaging train. A genuine ZWO USB 3.0 cable guarantees the full bandwidth required for high-speed planetary, lunar, and solar imaging. This direct connection is essential for achieving the maximum frames per second your camera is capable of, giving you more data to stack for sharper results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Connections and a 2-Year Warranty\u003c\/h3\u003e\n\u003cp\u003eThe USB 3.0 Type B connector is physically more robust and secure than smaller USB ports, reducing the risk of accidental disconnection in the dark. As an official ZWO product, this cable is built for repeated field use and is backed by a 2-Year warranty for your peace of mind.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the ZWO USB3.0 2m cable used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is the standard data cable for connecting ZWO cameras that feature a \u003cstrong\u003eUSB 3.0 Type B port\u003c\/strong\u003e to a computer, hub, or ASIAIR controller with a standard \u003cstrong\u003eUSB 3.0 Type A port\u003c\/strong\u003e. It ensures the camera receives stable power and can transmit data at its maximum rated speed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 2m ZWO cable work with older USB 2.0 ports?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the cable is backward-compatible with USB 2.0 ports. However, the connection will be limited to USB 2.0 speeds (480Mbps), which will significantly reduce the maximum frame rate possible from a USB 3.0 camera. For best results, always connect to a USB 3.0 port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy original ZWO camera cable was damaged. Is this an identical replacement?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this 6.5-foot (2-meter) cable is the official ZWO replacement part, matching the one originally supplied with most of their USB 3.0 cameras like the ASI120, ASI174, and ASI294 series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy does my ZWO camera use a Type B connector?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eUSB 3.0 Type B connector\u003c\/strong\u003e provides a more secure and durable physical connection compared to smaller USB ports. This design choice by ZWO helps prevent accidental disconnections in the dark, which could corrupt data or ruin an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm using a ZWO ASI174MM for lunar imaging on my 10\" Dobsonian. Is this 6.5-foot cable long enough?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 6.5-foot (2-meter) length is generally sufficient for setups where the control computer is on a small table or cart right next to the telescope mount. It provides enough slack to allow for the telescope's movement across the sky without pulling on the camera or computer ports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill I lose data speed with the ZWO USB3.0 cable at its full 2m length when imaging Jupiter with my ASI585MC?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This 2-meter cable is manufactured to ZWO's specifications to maintain full USB 3.0 signal integrity over its entire length. You can run your ASI585MC at its maximum frame rate without worrying about data loss or dropped frames caused by the cable itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eZWO-USB3-2M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e6.5 feet (2 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 Type B (Male) to USB 3.0 Type A (Male)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eZWO USB3.0 Cable (2m)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/zwo-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eZWO 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZWO","offers":[{"title":"Default Title","offer_id":48347825111325,"sku":"ZWO-USB3-2M","price":26.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-USB3-2M.jpg?v=1714662905"},{"product_id":"qhyccd-4-pin-to-6-pin-cable-for-qhycfw3","title":"QHYCCD 4-pin to 6-pin Cable for QHYCFW3","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects legacy 4-pin QHY accessories to the 6-pin port on the QHYCFW3\u003c\/li\u003e\n\u003cli\u003eEnsures correct power and data pinout for reliable operation\u003c\/li\u003e\n\u003cli\u003eOfficial QHYCCD component for guaranteed compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eQHYCCD 4-pin to 6-pin Cable for QHYCFW3\u003c\/h2\u003e\n\u003cp\u003eThis QHYCCD 4-pin to 6-pin Cable is the specific adapter required to connect select QHY cameras and accessories that use a 4-pin DIN-style port to the 6-pin port on the QHYCFW3 series filter wheels. This cable ensures the correct power and data lines are matched between devices, preventing damage and ensuring reliable communication for filter changes during your imaging sequence.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDedicated Connectivity for the QHYCFW3 Filter Wheel\u003c\/h3\u003e\n\u003cp\u003eThe QHYCFW3 filter wheel utilizes a more modern 6-pin connection for power and data, while some previous generation QHY cameras and accessories use a 4-pin standard. This official QHYCCD cable bridges that gap, providing a secure and electronically correct link. Using a standard, off-the-shelf cable with a different pinout can result in equipment damage, making this specific adapter essential for integrating the QHYCFW3 into certain imaging trains.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the QHYCCD 4-pin to 6-pin cable used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is designed specifically to connect a QHYCCD device with a 4-pin port (like some older QHY cameras) to the 6-pin port on a QHYCFW3 filter wheel. It adapts the different pin configurations to ensure proper power and data communication.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this cable required for all cameras used with the QHYCFW3?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. Many modern QHY cameras connect to the QHYCFW3 using a different cable or method. This 4-pin to 6-pin cable is only necessary if your specific camera or control accessory has a 4-pin output port that you need to connect to the filter wheel's 6-pin input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a generic RJ11 or other 6-pin cable instead of this QHYCCD cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. It is critical to use the official QHYCCD cable. Generic telecommunication or data cables may have the same connectors but will have a different internal wiring (pinout). Using the wrong cable can send incorrect voltage to data pins, potentially causing permanent damage to your camera or the QHYCFW3 filter wheel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if my QHY camera needs this 4-pin to 6-pin cable for the QHYCFW3?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou need this cable if your QHY camera has a 4-pin DIN-style accessory port intended for filter wheel control and you want to connect it to the 6-pin port on the QHYCFW3. Always check the manual for your specific camera model to confirm its filter wheel connection type.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this cable provide power to the QHYCFW3?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this cable is designed to transmit both power and data signals from the camera to the QHYCFW3 filter wheel, allowing the camera to control filter positions without a separate power source for the wheel, assuming the camera's port provides sufficient power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the length of the QHYCCD 4-pin to 6-pin cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe exact length is not specified, but it is typically a short \"pigtail\" adapter designed to make a connection within a tightly packed imaging train, not for long-distance runs. Its purpose is to adapt the port directly at the equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":48373845557533,"sku":"QHY-030011","price":21.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"zwo-usb2-0-type-c-cables-2x-0-5m","title":"ZWO USB2.0 Type C Cable Pack - 0.5m \u0026 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n    \u003cli\u003e\n        Two types of USB2.0 cables with different length(2M\/0.5M).\n    \u003c\/li\u003e\n    \u003cli\u003e\n        Type-C (male) to Type-A (male)\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n    \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n    \u003cli\u003eSpecifications\u003c\/li\u003e\n    \u003cli\u003eIn the Box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n    \u003cli class=\"active\"\u003e       \n        \u003cdiv\u003e\n\n            \u003c!-- Title image text --\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003c!-- Main Image --\u003e\n                \u003cdiv class=\"DAV-section-center\"\u003e\n                    \u003ch2\u003eZWO USB 2.0 Cable – 0.5m \u0026amp; 2m - Overview\u003c\/h2\u003e\n                    \u003cimg src=\"https:\/\/davidastro.com\/cdn\/shop\/files\/ZWO-USB2-C_799x799.jpg?v=1724437770\" alt=\"ZWO USB2.0 Cable - 0.5m \u0026amp; 2m\" class=\"DAV-img-banner\"\u003e\n                    \u003cp\u003e\n                        Upgrade to the ZWO USB 2.0 Type-C data cable with a round design, offering enhanced flexibility, improved stability, and reduced interference. Perfect for cameras, filter wheels, and other compatible devices, this cable ensures seamless and reliable connectivity.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n\n            \u003c!-- Features Grid --\u003e\n            \u003cdiv class=\"DAV-feature-grid\"\u003e\n                \u003c!-- Feature Box 1 --\u003e\n                \u003cdiv class=\"DAV-feature-box\"\u003e\n                    \u003ch3\u003eRound Design\u003c\/h3\u003e\n                    \u003cp\u003e\n                        Enhances durability, flexibility, and minimizes interference for stable data transmission.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n                \u003c!-- Feature Box 2 --\u003e\n                \u003cdiv class=\"DAV-feature-box\"\u003e\n                    \u003ch3\u003eVersatile Compatibility\u003c\/h3\u003e\n                    \u003cp\u003e\n                        Ideal for ZWO USB 2.0 cameras, filter wheels, and various other devices.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n                \u003c!-- Feature Box 3 --\u003e\n                \u003cdiv class=\"DAV-feature-box\"\u003e\n                    \u003ch3\u003eMultiple Length Options\u003c\/h3\u003e\n                    \u003cp\u003e\n                        Choose between 2 meters for extended reach or 0.5 meters for compact setups.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n\n            \u003c!-- image text --\u003e\n            \u003cdiv class=\"DAV-section-container\"\u003e\n                \u003c!-- Text Section --\u003e\n                \u003cdiv class=\"DAV-section-text\"\u003e\n                    \u003ch3\u003eValuable Addition\u003c\/h3\u003e                \n                    \u003cp\u003e\n                        \u003cb\u003eZWO USB 2.0 Type-C 2m Cable\u003c\/b\u003e\n                        \u003cbr\u003e\n                        Cable Length: 2 meters\n                        \u003cbr\u003e\n                        USB Connector Type: Type-C (male) to Type-A (male)\n                    \u003c\/p\u003e \n                    \u003cp\u003e\n                        \u003cb\u003eZWO USB 2.0 Type-C 0.5m Cable\u003c\/b\u003e\n                        \u003cbr\u003e\n                        Cable Length: 0.5 meters\n                        \u003cbr\u003e\n                        USB Connector Type: Type-C (male) to Type-A (male)\n                    \u003c\/p\u003e  \n                \u003c\/div\u003e\n                \u003c!-- Image Section --\u003e\n                \u003cdiv class=\"DAV-section-img\"\u003e\n                    \u003cimg src=\"https:\/\/davidastro.com\/cdn\/shop\/files\/ZWO-USB2-C_799x799.jpg?v=1724437770\" alt=\"ZWO USB2.0 Cable - 0.5m \u0026amp; 2m - Valuable Addition\"\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003ctable class=\"DAV-specifications\"\u003e\n            \u003ctbody\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eCable Length\u003c\/td\u003e\n                    \u003ctd\u003e0.5m or 2m\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eUSB Connector Type\u003c\/td\u003e\n                    \u003ctd\u003eType-B (male) to Type-A (male)\u003c\/td\u003e\n                \u003c\/tr\u003e\n            \u003c\/tbody\u003e\n        \u003c\/table\u003e\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n        \u003cul class=\"DAV-grid\"\u003e\n            \u003cli class=\"DAV-grid-item\"\u003e\n                \u003cimg src=\"https:\/\/davidastro.com\/cdn\/shop\/files\/ZWO-USB2-C_799x799.jpg?v=1724437770\" alt=\" ZWO USB2.0 Cable - 0.5m \u0026amp; 2m - Cable\" class=\"DAV-img-box\"\u003e\n                \u003cdiv\u003e\n                    \u003cp class=\"DAV-item-title\"\u003eZWO USB 2.0 Type C Cable – 0.5m \u0026amp; 2m\u003c\/p\u003e\n                    \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/li\u003e\n        \u003c\/ul\u003e          \n    \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZWO","offers":[{"title":"Default Title","offer_id":49073964450077,"sku":"ZWO-USB2-C","price":26.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-USB2-C.jpg?v=1724437770"},{"product_id":"explore-scientific-es-ascom-y","title":"Explore Scientific ES-ASCOM-Y Dual Plug Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects DB9 and USB Mini-B devices simultaneously to one computer\u003c\/li\u003e\n\u003cli\u003eEnables ASCOM control for Explore Scientific PMC-Eight systems\u003c\/li\u003e\n\u003cli\u003eFeatures an integrated FTDI chipset for reliable serial communication\u003c\/li\u003e\n\u003cli\u003eCompatible with EXOS2GT, Losmandy G11, and iEXOS series mounts\u003c\/li\u003e\n\u003cli\u003eBroad OS support for Windows, macOS, and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific ES-ASCOM-Y Dual Plug Cable\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific ES-ASCOM-Y Cable unifies control of your PMC-Eight system, connecting both legacy DB9 and modern USB Mini-B mounts to a single computer for ASCOM-driven sessions. This dual-plug Y-cable uses an integrated FTDI chipset for reliable COM port communication with mounts like the EXOS2GT and Losmandy G11, while simultaneously connecting iEXOS series mounts via its USB 2.0 Mini-B plug.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUnified ASCOM Control for PMC-Eight Systems\u003c\/h3\u003e\n\u003cp\u003eThis cable streamlines your imaging setup by eliminating the need for multiple adapters and cables. It allows you to control two different PMC-Eight-equipped mounts, one with a DB9 port and the other with a USB 2.0 Mini B port, from a single ASCOM-compatible software interface on your computer. This simplifies cable management at the mount and ensures a stable connection for remote control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe DB9 Connector: FTDI Chipset for Legacy Mounts\u003c\/h3\u003e\n\u003cp\u003eThe DB9 connector is built with an industry-leading FTDI chipset, which ensures stable, reliable communication by creating a standard Windows COM port. This is essential for controlling mounts like the EXOS2GT with PMC-Eight and the Losmandy G11 with PMC-Eight. The connection supports full RS-232 modem and data signals (DCD, TXD, RXD, DTR, GND, DSR, RTS, CTS, RI) for robust control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e The FTDI chipset supports a wide range of operating systems, including Windows (10\/8.1\/8\/7\/Vista\/XP\/2000), Mac OS X (10.6 and above), and Linux (2.4 or above).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe USB Mini-B Connector: Modern Mounts and 5V Power\u003c\/h3\u003e\n\u003cp\u003eThe second leg of the cable terminates in a USB 2.0 Mini B male connector, designed for modern mounts like the iEXOS series. This plug also provides a standard Windows COM port for seamless ASCOM integration. In addition to data, this connection can charge compatible 5-volt-DC devices, though some electronics may require a separate adapter not sold by Explore Scientific.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main purpose of the Explore Scientific ES-ASCOM-Y cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe ES-ASCOM-Y cable is designed to connect Explore Scientific's PMC-Eight OPENGoTo systems to a computer for control via ASCOM. Its dual-plug design allows you to simultaneously connect a mount using a DB9 serial port and another using a USB 2.0 Mini-B port, all through a single cable to your PC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich mounts are compatible with the DB9 plug on the ES-ASCOM-Y cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe DB9 plug, which features a reliable \u003cstrong\u003eFTDI chipset\u003c\/strong\u003e, is specifically for connecting the \u003cstrong\u003eEXOS2GT with PMC-Eight\u003c\/strong\u003e and the \u003cstrong\u003eLosmandy G11 with PMC-Eight\u003c\/strong\u003e to your computer's USB port for ASCOM control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich mounts use the USB Mini-B plug on the ES-ASCOM-Y cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe USB 2.0 Mini-B male connector is designed to connect the \u003cstrong\u003eiEXOS series of mounts\u003c\/strong\u003e to your computer for ASCOM control. It also provides 5V power for charging compatible devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the ES-ASCOM-Y cable require special drivers?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the cable uses an FTDI chipset to create virtual COM ports. While many modern operating systems like Windows 10, macOS, and Linux have built-in support, you may need to download the latest FTDI drivers to ensure proper installation and stable communication with your mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the ES-ASCOM-Y cable to control my Losmandy G11 with PMC-Eight from a laptop running Windows 10?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The cable's FTDI chipset is fully supported on Windows 10. Simply connect the DB9 plug to your mount and the main USB plug to your laptop, ensure the correct COM port is selected in your ASCOM driver, and you will have full GoTo control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I charge my phone with the USB Mini-B plug on the ES-ASCOM-Y cable while imaging with my iEXOS-100?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe USB Mini-B plug provides a 5-volt DC power output suitable for charging some devices. However, it is primarily intended for data connection to the mount. Charging a high-draw device like a modern smartphone may not be efficient, and you might need a specific adapter (e.g., Mini-B to USB-C) which is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e8118030330782\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDual plug (DB9 FTDI and USB 2.0 Mini B) Y-Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":52909303464221,"sku":"ES-ASCOM-Y","price":49.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ExploreScientific-Dual-plug-DB9-FTDI-chipset-and-USB-2-0-Mini-B-1_3057ef8d-acbd-4cf6-b056-0e7cafabcb13.jpg?v=1789061144"},{"product_id":"primalucelab-pl1000049","title":"PrimaLuceLab EAGLE-compatible power cable for QSI cameras - 115cm 8A","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePowers QSI cameras directly from any PrimaLuceLab EAGLE unit\u003c\/li\u003e\n\u003cli\u003e115cm (45.3\") cable length for flexible routing\u003c\/li\u003e\n\u003cli\u003eRated for up to 8A of current at 12V\u003c\/li\u003e\n\u003cli\u003eThreaded screw-lock EAGLE connector prevents accidental disconnection\u003c\/li\u003e\n\u003cli\u003eDurable construction for reliable field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eEAGLE-compatible power cable for QSI cameras - 115cm 8A\u003c\/h2\u003e\n\u003cp\u003eThis 115cm power cable delivers a secure 12V, 8A connection from your PrimaLuceLab EAGLE control unit directly to your QSI camera, eliminating the need for a separate power supply for the camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure 12V, 8A Power Connection for QSI Cameras\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for the EAGLE ecosystem, this cable's most critical feature is the threaded screw-on connector. This ensures the 12V power link to your EAGLE remains firmly locked, preventing a cable snag or accidental pull from interrupting power to your QSI camera during a critical long exposure. The 115cm length provides ample reach for most telescope configurations, allowing for clean cable management from the EAGLE to the camera body.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the screw-lock connector on this EAGLE to QSI power cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe screw-lock connector threads directly onto the EAGLE's 12V output port, creating a secure physical connection that cannot be accidentally unplugged. This is a critical feature for remote and automated imaging, as it prevents power loss to your QSI camera due to cable snags during slewing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 115cm length of this EAGLE power cable sufficient for a large fork-mounted SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA length of 115cm (approximately 45 inches) is generally sufficient for most setups, including fork-mounted SCTs where the EAGLE is mounted on the optical tube. It allows for a clean route to the camera without excessive slack. However, for exceptionally large or complex setups, you should measure your required cable path to confirm it's adequate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan this 8A power cable be used with cameras other than QSI models?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this cable is designed specifically for QSI cameras. While the EAGLE-side connector is standard, the camera-side plug is wired and sized for the power input jack on QSI cameras. Using it with other brands may not work and could potentially damage your equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy do I need this specific cable to power my QSI camera from an EAGLE unit?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou need this cable to safely and securely adapt the EAGLE's threaded 8A power output port to the standard 12V DC input jack on your QSI camera. It ensures both a physically secure connection and the correct power delivery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this power cable work with any PrimaLuceLab EAGLE model?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this cable is compatible with the 12V, 8A threaded output ports found on all PrimaLuceLab EAGLE models (such as the EAGLE5 and EAGLE6), allowing you to power your QSI camera regardless of which EAGLE you own.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does this 12V cable prevent issues during a long exposure on my QSI camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eBy preventing accidental power disconnection. A standard push-in power plug can easily be knocked loose, causing your camera to shut down and ruin an exposure. The screw-on EAGLE connector on this 12V cable makes such a disconnection virtually impossible, safeguarding your imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003ePrimaLuceLab EAGLE (all models) to QSI cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e115cm (45.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Current\u003c\/td\u003e\n\u003ctd\u003e8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAGLE-side Connector\u003c\/td\u003e\n\u003ctd\u003eThreaded screw-lock plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera-side Connector\u003c\/td\u003e\n\u003ctd\u003e12V DC jack for QSI cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eEAGLE-compatible power cable for QSI cameras - 115cm\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product does not require a manual or software.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/primalucelab-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePrimaLuceLab 1-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":52913361420573,"sku":"PLL-PL1000049","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PrimaLuceLab-EAGLE-compatible-power-cable-for-QSI-cameras-115cm-8A-1_c5b274b6-2c5c-48c7-93e1-75b86fb8fbfe.jpg?v=1789089896"},{"product_id":"primalucelab-pl1000047","title":"PrimaLuceLab EAGLE-compatible power Y cable for 3A port","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eSplits one 12V EAGLE port into two power outputs\u003c\/li\u003e\n\u003cli\u003eDesigned for the 3A threaded ports on EAGLE units\u003c\/li\u003e\n\u003cli\u003eProvides a total shared current of 3A\u003c\/li\u003e\n\u003cli\u003e115cm total cable length for flexible routing\u003c\/li\u003e\n\u003cli\u003eCompatible with both 2.1mm and 2.5mm center-pin barrel connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eEAGLE-compatible power Y cable for 3A port\u003c\/h2\u003e\n\u003cp\u003eThis 115cm EAGLE-compatible power Y cable expands a single 3A 12V output port on your PrimaLuceLab EAGLE into two, allowing you to power multiple devices without occupying another port. The cable provides a total shared current of 3A and features a secure, threaded screw-on connector to prevent accidental power loss during an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eTurn One 3A EAGLE Port Into Two 12V Outputs\u003c\/h3\u003e\n\u003cp\u003eFree up valuable power ports on your EAGLE control unit. This Y-cable is specifically designed to plug into one of the 3A-rated outputs, instantly providing two 12V connections for your accessories. This is ideal for powering a mount and a focuser, or other combinations of low-draw equipment, from a single source.\u003c\/p\u003e\n\u003cp\u003eIt's important to note that the total current is shared across both outputs. The cable delivers a maximum combined total of 3A, not 3A per device. You must ensure the combined power draw of the two connected devices does not exceed this 3A limit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Power with a 115cm Screw-On Cable\u003c\/h3\u003e\n\u003cp\u003eDesigned for reliability in the field, the cable's input connector threads directly onto the EAGLE's 3A port, creating a solid, vibration-proof connection that won't pull out accidentally as your telescope slews. At 115cm long, the cable provides ample length for clean cable management, reaching from the EAGLE to devices mounted elsewhere on the optical tube or mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePower 2.1mm \u0026amp; 2.5mm Devices for Mounts and Focusers\u003c\/h3\u003e\n\u003cp\u003eThis cable offers broad compatibility by terminating in two standard positive-tip barrel connectors: one 5.5mm x 2.1mm and one 5.5mm x 2.5mm. This configuration allows you to directly power a wide range of common astronomy gear without needing separate adapters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.5mm x 2.1mm Connector:\u003c\/strong\u003e Powers many popular mounts, including the SkyWatcher EQ6, HEQ5, and EQ5 series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.5mm x 2.5mm Connector:\u003c\/strong\u003e Powers PrimaLuceLab accessories like ESATTO robotic focusers and SESTO SENSO focusing motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eChoosing Between the 3A and 8A Y-Cable\u003c\/h3\u003e\n\u003cp\u003ePrimaLuceLab offers two versions of this cable, and selecting the right one is critical for device safety and performance. This 3A Y-cable is intended for lower-power devices.\u003c\/p\u003e\n\u003cp\u003eFor high-consumption equipment like large cooled CMOS\/CCD cameras or dew heaters, you must use the separate 8A Y-cable connected to one of the EAGLE's 8A-rated ports. Attempting to power a high-draw device from a 3A port can lead to intermittent power loss or damage to your equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow much current can the EAGLE 3A Y-cable provide to each device?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe cable provides a \u003cstrong\u003etotal shared current of 3A\u003c\/strong\u003e. This means the combined power draw of the two devices you connect must not exceed 3A. It does not provide 3A to each device simultaneously.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of connector does this 3A Y-cable use to attach to the EAGLE?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIt uses a \u003cstrong\u003ethreaded, screw-on connector\u003c\/strong\u003e designed specifically for the 3A ports on the PrimaLuceLab EAGLE. This ensures a secure, stable connection that cannot be accidentally disconnected during operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this EAGLE 3A Y-cable to power my SkyWatcher HEQ5 mount and my ESATTO focuser?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is an excellent use case for this cable. The Y-cable has the correct 2.1mm and 2.5mm barrel plugs for those specific devices. The combined power draw of an HEQ5 (during normal tracking) and an ESATTO focuser is well within the 3A limit of the cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 3A Y-cable power my cooled astronomy camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. Most thermoelectric cooling systems in astronomy cameras draw more than 3A, especially at high power. You should connect your cooled camera directly to one of the EAGLE's dedicated \u003cstrong\u003e8A ports\u003c\/strong\u003e to ensure it receives sufficient, stable power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the length of the EAGLE 3A power Y-cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe total length of the cable is \u003cstrong\u003e115cm\u003c\/strong\u003e (approximately 45 inches), providing enough reach for most telescope and mount configurations while allowing for clean cable routing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat's the difference between the PrimaLuceLab 3A and 8A Y-cables?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary difference is the port they connect to and the total current they can handle. This \u003cstrong\u003e3A Y-cable\u003c\/strong\u003e is for the lower-power, threaded 3A ports. The \u003cstrong\u003e8A Y-cable\u003c\/strong\u003e is designed for the higher-power 8A ports and is necessary for devices like large mounts, cooled cameras, or multiple dew heaters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003ePower Y-Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Connector\u003c\/td\u003e\n\u003ctd\u003eEAGLE 3A Screw-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connectors\u003c\/td\u003e\n\u003ctd\u003e1x (5.5mm x 2.1mm), 1x (5.5mm x 2.5mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Current (Shared)\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Polarity\u003c\/td\u003e\n\u003ctd\u003ePositive Center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e115cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eEAGLE-compatible power Y cable for 3A port\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/primalucelab-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePrimaLuceLab 1-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":52913364271389,"sku":"PLL-PL1000047","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PrimaLuceLab-EAGLE-compatible-power-Y-cable-for-3A-port-1_20b4f5ce-f96c-41c8-a8e7-cf4ee40d1bf2.jpg?v=1789089915"},{"product_id":"primalucelab-pl1000048","title":"PrimaLuceLab EAGLE-compatible power Y cable for 8A port","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eSplits one 8A EAGLE power port into two outputs\u003c\/li\u003e\n\u003cli\u003eProvides one 5.5\/2.1mm and one 5.5\/2.5mm connector\u003c\/li\u003e\n\u003cli\u003eTotal combined output of 8A at 12V\u003c\/li\u003e\n\u003cli\u003e115cm total cable length for flexible routing\u003c\/li\u003e\n\u003cli\u003eSecure screw-on connector prevents accidental detachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eEAGLE-compatible power Y cable for 8A port\u003c\/h2\u003e\n\u003cp\u003eThis EAGLE-compatible power Y cable for 8A port splits a single 12V high-amperage output on your PrimaLuceLab EAGLE into two separate power leads, allowing you to run multiple devices without occupying extra ports. The total length of 115cm provides ample reach for clean cable management around your telescope, while the secure screw-on connector ensures a stable connection that won't pull loose during a slew. With one 5.5x2.1mm plug and one 5.5x2.5mm plug, this single cable can power a mixed set of devices, from QHY and ATIK cameras to high-draw Moravian cooled sensors, all from one 8A port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePower Two Devices from a Single 8A EAGLE Port\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for the high-current 8A outputs on the EAGLE, this Y-cable simplifies your power setup by letting you run two devices from one port. It's critical to note that the total current is shared; the cable provides a combined maximum of 8A, not 8A per lead. The 115cm length is ideal for routing power to a cooled camera and another accessory mounted on the same optical tube.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed Connectors:\u003c\/strong\u003e The cable includes two different standard DC barrel plugs to maximize compatibility: one 5.5x2.1mm (positive tip) for brands like QHYCCD, ATIK, and Player One, and one 5.5x2.5mm (positive tip) for hardware like Moravian cooled cameras.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Connection:\u003c\/strong\u003e The EAGLE-side connector threads directly onto the 8A port, creating a rigid, reliable connection that prevents accidental power loss if the cable is snagged in the dark.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e8A vs. 3A Y-Cable: Choosing the Right Power Splitter\u003c\/h3\u003e\n\u003cp\u003ePrimaLuceLab offers Y-cables for both the 8A and 3A ports on the EAGLE, and choosing the correct one is essential for system stability. This 8A cable is designed for powering high-draw equipment, primarily cooled CMOS or CCD cameras, which often require more than 3 amps, especially during cooler warm-up or high-power operation.\u003c\/p\u003e\n\u003cp\u003eThe 3A Y-cable, by contrast, is intended for lower-power accessories. Use the 3A version for items like electronic focusers, filter wheels, or guide cameras. Using the 8A cable ensures your power-hungry imaging camera gets the current it needs without compromise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the total amperage the EAGLE 8A Y-cable can provide?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe cable splits a single 8A port, but the total current available to both connected devices is still a maximum of \u003cstrong\u003e8A combined\u003c\/strong\u003e. It does not provide 16A. You must ensure the sum of the current draw of your two devices does not exceed 8A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this EAGLE Y-cable fit my QHYCCD camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The cable includes one lead with a \u003cstrong\u003e5.5x2.1mm barrel connector\u003c\/strong\u003e (positive tip), which is the standard size used by most QHYCCD, ATIK, and Player One cameras.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow long is the EAGLE 8A power Y-cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe total length of the cable is \u003cstrong\u003e115cm\u003c\/strong\u003e (approximately 45 inches), providing sufficient length for routing from the EAGLE unit to devices mounted on the telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 8A Y-cable to power a Moravian camera and an ATIK camera simultaneously from my EAGLE?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is an ideal use case for this cable. It provides both the \u003cstrong\u003e5.5x2.5mm connector\u003c\/strong\u003e needed for the Moravian camera and the \u003cstrong\u003e5.5x2.1mm connector\u003c\/strong\u003e for the ATIK camera. Simply verify that their combined power draw under full load (i.e., cooler at 100%) does not exceed the 8A limit of the EAGLE port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat prevents the EAGLE 8A Y-cable from accidentally disconnecting?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe end of the cable that connects to the EAGLE unit features a \u003cstrong\u003ethreaded screw-on connector\u003c\/strong\u003e. This provides a secure, mechanical lock to the port, preventing it from being pulled out accidentally during operation, which is a significant advantage over standard push-in friction-fit DC plugs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I choose the 8A Y-cable over the 3A version for my setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou should choose the \u003cstrong\u003e8A Y-cable\u003c\/strong\u003e if you need to power at least one high-draw device, such as a cooled astrophotography camera. The \u003cstrong\u003e3A Y-cable\u003c\/strong\u003e is designed for splitting power for lower-consumption accessories like motorized focusers or filter wheels. Using the wrong cable could lead to under-powering your devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Connector\u003c\/td\u003e\n\u003ctd\u003eEAGLE 8A Threaded Screw-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Ports\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Combined Output Current\u003c\/td\u003e\n\u003ctd\u003e8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e115cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connector 1\u003c\/td\u003e\n\u003ctd\u003e5.5mm x 2.1mm DC Barrel (Center Pin Positive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connector 2\u003c\/td\u003e\n\u003ctd\u003e5.5mm x 2.5mm DC Barrel (Center Pin Positive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Brands (2.1mm)\u003c\/td\u003e\n\u003ctd\u003eQHYCCD, ATIK, Player One, and others\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Brands (2.5mm)\u003c\/td\u003e\n\u003ctd\u003eMoravian Instruments and others\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eEAGLE-compatible power Y cable for 8A port\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PrimaLuceLab_EAGLE6_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/primalucelab-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePrimaLuceLab 1-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":52913365909789,"sku":"PLL-PL1000048","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PrimaLuceLab-EAGLE-compatible-power-Y-cable-for-8A-port-1_9bcbd0b3-b937-41ab-995b-daa2a1281746.jpg?v=1789089923"},{"product_id":"primalucelab-pl1000037","title":"PrimaLuceLab EAGLE-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A port","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e115cm (45.3\") Cable Length\u003c\/li\u003e\n\u003cli\u003eConnects to PrimaLuceLab EAGLE 8A Power Port\u003c\/li\u003e\n\u003cli\u003e5.5mm Outer \/ 2.1mm Inner Barrel Connector\u003c\/li\u003e\n\u003cli\u003eLocking Screw on Device-Side Connector\u003c\/li\u003e\n\u003cli\u003ePositive Tip Polarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eEAGLE-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A port\u003c\/h2\u003e\n\u003cp\u003eThis 115cm EAGLE-compatible power cable is specifically designed to deliver reliable 12V power from your EAGLE computer's high-current 8A port. It terminates in a 5.5mm\/2.1mm barrel connector with a locking screw, providing a secure, uninterruptible connection to compatible cameras, focusers, and other accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Power for EAGLE Systems: 115cm Cable for 8A Ports\u003c\/h3\u003e\n\u003cp\u003eDesigned exclusively for the PrimaLuceLab EAGLE ecosystem, this cable connects to the dedicated 8A threaded ports, preventing it from being accidentally pulled out from the control unit. At 115cm long, it offers ample length for routing around most telescope configurations without creating excessive slack that can lead to snags.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eLocking 5.5mm\/2.1mm Connector: Eliminate Accidental Disconnections\u003c\/h3\u003e\n\u003cp\u003eThe key feature of this cable is the locking screw on the device-side 5.5mm\/2.1mm barrel connector. This small but critical detail ensures the cable remains firmly attached to your equipment, eliminating the primary cause of power-related imaging failures—a cable that has been nudged loose in the dark.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositive Tip Polarity:\u003c\/strong\u003e Matches the standard for most astronomy devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility Check:\u003c\/strong\u003e Before use, you must verify that your device uses a 5.5mm\/2.1mm plug, accepts 12V positive-tip power, and draws no more than 8A of current.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if this 115cm EAGLE power cable is compatible with my device?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou must check three things on the device you wish to power. First, confirm it has a \u003cstrong\u003e5.5mm outer diameter, 2.1mm inner diameter\u003c\/strong\u003e power input jack. Second, verify it requires \u003cstrong\u003e12V DC power with positive tip polarity\u003c\/strong\u003e. Finally, ensure its maximum power consumption is \u003cstrong\u003eless than 8 amps\u003c\/strong\u003e. This information is usually printed on the device or in its manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the locking screw on this EAGLE power cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe locking screw threads onto compatible power jacks to create a secure physical connection that cannot be accidentally unplugged. This prevents power interruptions to critical equipment like your camera or focuser, which can be caused by cable drag as the telescope slews across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I plug this EAGLE power cable into a port other than the 8A one?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This cable is designed with a threaded connector that mates specifically with the 8A output ports on an EAGLE unit. It will not physically connect to the lower-amperage, non-threaded ports, ensuring you do not accidentally overload a circuit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat happens if my device draws more than 8A? Can I still use this EAGLE cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou must not use this cable for any device that requires more than 8A of current. Attempting to do so can damage the EAGLE's internal power board, the device itself, or create a fire hazard. Always verify your equipment's power requirements before connecting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 115cm EAGLE cable be long enough for my SCT setup with a PrimaLuceLab ESATTO focuser?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, at 115cm (approximately 45 inches), this cable is generally sufficient for connecting an ESATTO focuser or other accessories on most common setups, including Schmidt-Cassegrains. It provides enough length to route from an EAGLE mounted on the top of the optical tube down to the focuser at the rear without being too tight at different pointing angles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy mount uses a 5.5mm\/2.5mm plug. Can I use this EAGLE cable to power it?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. While the outer diameter is the same, this cable has a \u003cstrong\u003e2.1mm inner pin\u003c\/strong\u003e. A 2.5mm jack requires a larger pin. Using this cable would result in a loose, unreliable connection or no connection at all. You must use a cable with the correct 2.5mm inner pin for such devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003ePrimaLuceLab EAGLE (8A Port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e115cm (45.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAGLE-Side Connector\u003c\/td\u003e\n\u003ctd\u003eThreaded, for 8A Port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice-Side Connector\u003c\/td\u003e\n\u003ctd\u003e5.5mm (outer) \/ 2.1mm (inner) barrel plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice-Side Feature\u003c\/td\u003e\n\u003ctd\u003eLocking Screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Current\u003c\/td\u003e\n\u003ctd\u003e8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eCenter Pin Positive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eEAGLE-compatible power cable with locking screw - 115cm\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/primalucelab-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePrimaLuceLab 1-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":52913365975325,"sku":"PLL-PL1000037","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PrimaLuceLab-EAGLE-compatible-power-cable-with-5-5-2-1-connector-and-locking-screw-115cm-for-8A-port-1_6de97876-12af-460a-8a45-40482c2c622e.jpg?v=1789089930"},{"product_id":"player-one-usb-3-0-cable-2m","title":"Player One USB 3.0 Cable - 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e2-Meter Length\u003c\/li\u003e\n\u003cli\u003eUSB 3.0 Interface\u003c\/li\u003e\n\u003cli\u003eFlexible Flat-Cable Design\u003c\/li\u003e\n\u003cli\u003eBuilt-in EMI Shielding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePlayer One USB 3.0 Cable - 2M\u003c\/h2\u003e\n\u003cp\u003eThis Player One USB 3.0 Cable provides a reliable 2-meter connection engineered specifically for astrophotography, using a shielded, flat design to ensure stable, high-speed data transmission from your camera to your computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eShielded Flat-Cable Design for 2M Reach\u003c\/h3\u003e\n\u003cp\u003eThe Player One USB 3.0 cable uses a flexible, flat-cable design that resists tangling and simplifies cable management around your mount and imaging train. Its 2-meter length offers ample reach from your camera to your control PC or hub. A built-in shielding layer is critical for astrophotography, protecting the high-speed data stream from electromagnetic interference (EMI) generated by nearby electronics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePlayer One vs. Generic USB 3.0: Why Shielding Matters\u003c\/h3\u003e\n\u003cp\u003eWhile any USB 3.0 cable can physically connect your camera, standard office-grade cables often lack the robust shielding needed in an astrophotography environment. Interference from mount motors, dew heaters, or power supplies can corrupt data, leading to dropped frames and failed imaging sessions. This Player One cable is built with a dedicated shielding layer to ensure stable, high-speed transmission, preserving the integrity of every sub-exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is the Player One USB 3.0 cable flat?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe flat design helps prevent tangling, especially in the dark and in cold weather. It makes cable management around your telescope mount easier and reduces the risk of snags during tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat does the shielding in the Player One 2M USB cable do?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe internal shielding protects the data signal from \u003cstrong\u003eelectromagnetic interference (EMI)\u003c\/strong\u003e. This is crucial in an astrophotography setup where electronics like mount motors, dew heaters, and power supplies can disrupt the connection, causing dropped frames or connection loss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 2M Player One cable be long enough for my 8\" SCT on an equatorial mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, a 2-meter length is generally sufficient for most setups, including an 8\" SCT on an equatorial mount. It provides enough slack to route the cable safely from the camera to a nearby laptop or USB hub without pulling or snagging as the mount tracks across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Player One USB cable necessary, or can I use a standard cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile a standard USB 3.0 cable will work, it may not provide a stable connection. Standard cables often lack the EMI shielding of the Player One cable, making them vulnerable to interference from other astro gear, which can lead to frustrating data transfer errors during an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm getting dropped frames with my Player One Neptune-C II camera. Could this cable help?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, dropped frames are a classic symptom of an unstable USB connection, often caused by EMI or a poor-quality cable. Using a purpose-built, shielded cable like this 2M Player One model is a primary troubleshooting step to ensure a stable, high-speed data link to your Neptune-C II camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Player One cable only for Player One cameras?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is a standard USB 3.0 Type-A to Type-B cable. It can be used with any astronomy camera or device that requires this connection type, regardless of the brand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2 Meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eShielded Flat Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003ePlayer One USB 3.0 Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product does not require software or a manual.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913429446941,"sku":"POA-USB3-2M","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-USB3-0-Cable-2M-1_9ef520cf-b207-4cb1-a823-2e2bf4cfb885.jpg?v=1789091018"},{"product_id":"player-one-type-c-to-type-a-usb3-2-cable-2m","title":"Player One Type-C to Type-A USB3.2 Cable - 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects USB-C devices to USB-A ports\u003c\/li\u003e\n\u003cli\u003eUSB 3.2 standard for high-speed data\u003c\/li\u003e\n\u003cli\u003e2-meter (6.5-foot) cable length\u003c\/li\u003e\n\u003cli\u003eDurable, flexible construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eType-C to Type-A USB3.2 Cable 2M\u003c\/h2\u003e\n\u003cp\u003eThis 2-meter Type-C to Type-A cable bridges the gap between modern USB 3.2 astronomy cameras and host computers equipped with standard USB-A ports. The generous 2-meter length provides crucial flexibility in routing the cable from your telescope to your laptop without putting strain on the connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 2-Meter USB 3.2 Connection for Modern Astro-Cameras\u003c\/h3\u003e\n\u003cp\u003eAs more astronomy cameras and accessories adopt the USB-C standard, a reliable adapter cable becomes essential for connecting to laptops, hubs, and control PCs that still use legacy USB-A ports. This cable ensures you can continue using your existing hardware without compromising the high-speed data transfer required for planetary imaging and other demanding applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility:\u003c\/strong\u003e Connects any USB-C device, such as a Player One or ZWO camera, to a computer or hub with a standard USB-A 3.0\/3.2 port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical Length:\u003c\/strong\u003e The 2-meter (approx. 6.5 feet) length is ideal for most portable telescope setups, allowing for clean cable management and movement without risking disconnection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Data Transfer:\u003c\/strong\u003e Built to the USB 3.2 specification, this cable is designed to handle the high data rates generated by modern CMOS sensors, preventing dropped frames during critical captures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is this Type-C to Type-A USB 3.2 Cable used for in astronomy?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is primarily used to connect modern astronomy cameras and devices that have a \u003cstrong\u003eUSB-C port\u003c\/strong\u003e to a computer, ASIAIR, or USB hub that has the older, rectangular \u003cstrong\u003eUSB-A ports\u003c\/strong\u003e. It ensures you can get a high-speed data connection even with mixed port types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 2M cable work with my Player One camera and a laptop with only USB-A ports?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. Player One cameras utilize a USB-C port for data transfer. This 2-meter cable is the perfect solution for connecting your Player One camera to a standard USB 3.0\/3.2 Type-A port on your laptop or PC for imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs 2 meters long enough for a typical telescope setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor most portable setups, including refractors or SCTs up to 8-11\" on a German equatorial mount, a 2-meter cable provides ample length to run from the camera to a laptop on a nearby table. For very large observatory setups, you may need to consider an active USB extension cable in addition to this one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this USB 3.2 cable support the full speed of my planetary camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is manufactured to the USB 3.2 standard, which is designed for high-speed communication. It will allow your camera and computer to negotiate the highest possible data rate, which is essential for preventing dropped frames during high-frame-rate planetary or lunar imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this cable to connect my ZWO camera to an ASIAIR Pro or Plus?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. If you have a newer ZWO camera with a USB-C port, this cable will allow you to connect it to one of the USB-A 3.0 (blue) ports on the ASIAIR Pro or Plus for high-speed image transfer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy do I need a Type-C to Type-A cable instead of a C-to-C cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou need this specific cable when your \u003cstrong\u003esource device (camera) has a USB-C port\u003c\/strong\u003e, but your \u003cstrong\u003ehost device (computer\/hub) has only USB-A ports\u003c\/strong\u003e. A C-to-C cable would only work if both the camera and the computer had USB-C ports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eUSB Type-C to USB Type-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Standard\u003c\/td\u003e\n\u003ctd\u003eUSB 3.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2 Meters (~6.5 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eUSB Type-C (Male)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eUSB Type-A (Male)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eType-C to Type-A USB 3.2 Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913429643549,"sku":"POA-TYPE-C-A-USB3.2-2M","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-Type-C-to-Type-A-USB3-2-Cable-2M-1_cfa76b60-c23d-40d1-abb9-ae27af60df9e.jpg?v=1789091027"},{"product_id":"player-one-type-c-to-type-a-usb2-0-cable-2m","title":"Player One Type-C to Type-A USB2.0 Cable - 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects USB Type-C devices to Type-A ports\u003c\/li\u003e\n\u003cli\u003e2-meter (6.56 ft) length\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 standard for reliable data transfer\u003c\/li\u003e\n\u003cli\u003eIdeal for guide cameras, filter wheels, and focusers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eType-C to Type-A USB2.0 Cable 2M\u003c\/h2\u003e\n      \u003cp\u003eThis 2-meter USB 2.0 cable provides a reliable connection between modern astronomy accessories using a USB Type-C port and computers or hubs equipped with standard USB Type-A ports. The generous 2-meter length ensures you have enough reach to manage cables cleanly from your telescope to your control computer without putting stress on the ports.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003e2-Meter Length for Flexible Equipment Routing\u003c\/h3\u003e\n      \u003cp\u003eA common point of failure in an imaging setup is a cable that's too short, leading to snags or disconnects as the telescope slews. This 2-meter cable gives you ample slack to route the connection safely along your mount and down to your laptop or pier-mounted PC, preventing accidental pulls that can ruin a sub-exposure or damage equipment.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n    \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eUSB 2.0 Standard: The Right Choice for Guiding and Accessories\u003c\/h3\u003e\n      \u003cp\u003eWhile high-speed planetary cameras require USB 3.0, many essential accessories do not. Guide cameras, filter wheels, and electronic focusers transmit very little data, making the robust and universally compatible USB 2.0 standard a perfect fit. Using a dedicated USB 2.0 cable for these devices ensures a stable connection without consuming high-speed bandwidth needed for your main imaging camera.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is this 2M USB-C to USB-A cable typically used for in an astronomy setup?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis cable is primarily used to connect astronomy accessories that feature a modern \u003cstrong\u003eUSB-C port\u003c\/strong\u003e to a computer, ASIAIR, or USB hub that uses the traditional \u003cstrong\u003eUSB-A port\u003c\/strong\u003e. It is ideal for devices like guide cameras, electronic filter wheels, or focusers that don't require high-speed data transfer.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this USB 2.0 cable be fast enough for my planetary camera?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo. This is a \u003cstrong\u003eUSB 2.0\u003c\/strong\u003e cable, designed for lower-bandwidth devices. High-resolution planetary imaging requires a \u003cstrong\u003eUSB 3.0\u003c\/strong\u003e cable (typically blue-tipped) to achieve maximum frame rates. Using this cable with a USB 3.0 camera will limit its speed significantly.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 2-meter cable to power a cooled astronomy camera?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis cable handles data transfer and can provide basic power to low-draw devices like a guide camera. However, it \u003cstrong\u003ecannot\u003c\/strong\u003e supply the high current required for the TEC cooler on a dedicated deep-sky camera. Cooled cameras require a separate 12V DC power supply.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I choose a USB 2.0 cable for my ZWO ASI120MM Mini guide camera?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eA guide camera like the ZWO ASI120MM Mini only sends small amounts of data intermittently. A USB 2.0 connection is more than sufficient and is often more stable over long cable runs than a more complex USB 3.0 connection. The 2-meter length is perfect for routing the cable from a guidescope back to your control computer without strain.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the 2-meter length of this cable create a risk of data loss for a filter wheel?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, a 2-meter length is well within the official USB 2.0 specification for reliable data transfer. The commands sent to a filter wheel are very simple (e.g., \"move to position 3\"), so there is virtually no risk of data corruption or signal loss over this distance.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Type-C to Type-A cable compatible with non-astronomy devices?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, absolutely. This is a standard USB 2.0 cable that can be used to connect or charge any device with a USB-C port—such as smartphones, tablets, or other peripherals—to a computer or charger with a USB-A port.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eType-A Male\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eType-C Male\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2 meters (6.56 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eType-C to Type-A USB 2.0 Cable\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913429872925,"sku":"POA-TYPE-C-A-USB2.0-2M","price":22.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-Type-C-to-Type-A-USB2-0-Cable-2M-1_bc453f1b-2425-4a60-9998-fa00acdac1e7.jpg?v=1789091035"},{"product_id":"player-one-type-c-to-type-b-usb2-0-cable-0-5m","title":"Player One Type-C to Type-B USB2.0 Cable - 0.5m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects USB-C to USB-B Devices\u003c\/li\u003e\n\u003cli\u003e0.5 Meter (1.64 ft) Length\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 Standard\u003c\/li\u003e\n\u003cli\u003eIdeal for Telescope Cable Management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eType-C to Type-B USB2.0 Cable 0.5M\u003c\/h2\u003e\n      \u003cp\u003eThis Type-C to Type-B USB 2.0 Cable provides a reliable, 0.5M connection between modern control computers with USB-C ports and astronomy peripherals that use the classic square USB-B connector. It is an essential component for creating a clean, snag-free astrophotography rig.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eA 0.5M Solution for Clean Cable Management\u003c\/h3\u003e\n      \u003cp\u003eThe 0.5-meter length is specifically chosen to eliminate excess cable that can cause drag, snags, or balancing issues on a telescope mount. This short-run cable is perfect for connecting a guide camera, filter wheel, or focuser directly to a mini-PC or USB hub (like an ASIAIR) mounted on the optical tube assembly.\u003c\/p\u003e\n      \u003cp\u003eBy keeping the connection tidy and contained within the footprint of your imaging train, you reduce the risk of cables catching on the mount or tripod during a long imaging session. The USB 2.0 standard provides ample bandwidth for most control-based accessories, ensuring stable communication throughout the night.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary use for this 0.5M Type-C to Type-B USB 2.0 Cable in an astrophotography setup?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis cable is designed for \u003cstrong\u003eshort-range connections on a telescope rig\u003c\/strong\u003e. Its primary use is to connect an astronomy camera, filter wheel, or other accessory with a USB-B port to a nearby computer or hub with a USB-C port, such as a mini-PC or ASIAIR mounted on the telescope itself. The 0.5M length minimizes cable clutter and prevents snags.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 0.5M USB 2.0 cable be long enough to connect my ZWO camera to an ASIAIR mounted on the dovetail bar?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, in most cases. A 0.5-meter (approximately 1.6 feet) length is typically sufficient to connect a camera at the rear of a telescope to a device like an \u003cstrong\u003eASIAIR or mini-PC mounted on the dovetail bar or handle\u003c\/strong\u003e of the same optical tube. It is ideal for keeping the wiring compact and moving with the telescope.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs USB 2.0 fast enough for a guide camera or filter wheel with this Type-C to Type-B cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eAbsolutely. The data transfer requirements for most guide cameras, motorized filter wheels, and electronic focusers are well within the capabilities of the \u003cstrong\u003eUSB 2.0 standard\u003c\/strong\u003e. High-speed planetary imaging cameras may require USB 3.0, but for control and guiding, this cable provides a stable and reliable connection.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I choose this 0.5M cable instead of a longer one?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYou would choose this 0.5M cable specifically for \u003cstrong\u003eon-telescope cable management\u003c\/strong\u003e. Longer cables create loops that can easily snag on your mount, tripod, or other equipment as the telescope slews across the sky. A shorter cable eliminates this risk, reduces cable drag that can affect guiding, and keeps your setup looking clean and organized.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this Type-C to Type-B cable to connect my Sky-Watcher mount's hand controller to my laptop?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eIt depends on the specific hand controller port. Many mounts use different connectors like RJ45 or serial. However, if your mount or controller has a \u003cstrong\u003esquare USB Type-B port\u003c\/strong\u003e for PC-direct control (like on many modern Sky-Watcher or Orion mounts), and your laptop has a USB-C port, this cable will work perfectly, assuming the 0.5M length is sufficient to reach.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Type-B connector on this 0.5M cable the square-shaped plug found on many astronomy cameras?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. The \u003cstrong\u003eUSB Type-B connector\u003c\/strong\u003e is the squarish plug that has been a standard on printers, hubs, and many astronomy peripherals for years. This cable adapts that common connector to the modern, smaller, oval-shaped USB Type-C port found on new laptops, tablets, and mini-PCs.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eUSB Type-C (Male)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eUSB Type-B (Male)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.5 Meters (1.64 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eType-C to Type-B USB2.0 Cable\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913430102301,"sku":"POA-TYPE-C-B-USB2.0-0.5M","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-Type-C-to-Type-B-USB2-0-Cable-0-5M-1_ef2e6618-f5e5-4117-b4a1-9037d1d65034.jpg?v=1789091043"},{"product_id":"player-one-type-c-to-type-b-usb2-0-cable-1m","title":"Player One Type-C to Type-B USB2.0 Cable - 1m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e1 Meter (3.3 ft) Length\u003c\/li\u003e\n\u003cli\u003eUSB Type-C Male Connector\u003c\/li\u003e\n\u003cli\u003eUSB Type-B Male Connector\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 Standard Compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eType-C to Type-B USB2.0 Cable 1M\u003c\/h2\u003e\n\u003cp\u003eThis Type-C to Type-B USB2.0 Cable provides a direct, reliable 1-meter connection between modern laptops and essential astronomy peripherals. It is built to the USB 2.0 standard, ensuring broad compatibility with the vast range of cameras, filter wheels, and focusers that use the classic square Type-B port, eliminating the need for failure-prone adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 1-Meter USB-C to USB-B 2.0 Cable for Astro-Gear\u003c\/h3\u003e\n\u003cp\u003eAs laptops move exclusively to USB-C ports, connecting to legacy astronomy hardware has become a challenge. This 1-meter cable directly bridges that gap, connecting your computer's USB-C port to the USB-B port common on countless CCD\/CMOS cameras, mounts, and accessories. The single-cable solution provides a more secure and reliable data link than using a separate adapter, reducing potential points of failure in your imaging train.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Connection:\u003c\/strong\u003e Plugs directly into a USB-C computer port and a USB-B device port with no intermediate dongles required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 2.0 Standard:\u003c\/strong\u003e Provides the 480 Mbps bandwidth necessary for device control and planetary imaging, compatible with the majority of astronomy peripherals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal Length:\u003c\/strong\u003e At 1 meter, this cable is long enough for flexible positioning of a laptop next to a pier or tripod but short enough to minimize cable snag and management issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy do I need a Type-C to Type-B USB2.0 Cable for my astronomy setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMany modern laptops, especially ultrabooks, only have USB-C ports. However, a vast amount of astronomy equipment—from cameras and filter wheels to mounts and focus controllers—still uses the robust, square USB-B port. This cable allows you to connect your new computer to your existing gear directly without needing an adapter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this 1M USB2.0 cable long enough for a portable setup with a laptop on a field tripod?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, a 1-meter (approximately 3.3 feet) length is generally ideal for portable setups. It provides enough slack to comfortably place a laptop on a tripod tray or small table next to the telescope without creating a large, unmanageable loop of excess cable that could be a tripping hazard in the dark.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Type-C to Type-B cable work with my ZWO or Player One camera that has a USB-B port?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. This cable is designed for any astronomy device that uses a standard USB 2.0 Type-B port for data communication. This includes many popular models of planetary and guide cameras from brands like ZWO, QHY, and Player One Astronomy, as well as focusers and filter wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is this cable USB 2.0 and not the faster USB 3.0?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe vast majority of astronomy accessories that use a Type-B connector (like focusers, filter wheels, and guide cameras) are built on the USB 2.0 standard. While USB 3.0 is faster, this cable is designed for maximum \u003cstrong\u003ecompatibility\u003c\/strong\u003e with that equipment. For device control and even high-speed planetary video, USB 2.0 provides ample bandwidth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 1M cable to power my astronomy device?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable will provide standard USB 2.0 power (typically 5V, 500mA). This is sufficient for many guide cameras and accessories. However, it will not power cooled cameras or mounts that require a separate, higher-amperage 12V DC power supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this cable replace the need for a USB-C hub or adapter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor a single device, yes. This cable provides a clean, one-to-one connection. Using a direct cable is often more reliable than a hub or adapter, as it minimizes the number of physical connection points that can come loose or fail. If you need to connect multiple USB devices, you will still need a hub.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913430298909,"sku":"POA-TYPE-C-B-USB2.0-1M","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-Type-C-to-Type-B-USB2-0-Cable-1M-1_830bd945-71fb-4ed9-8db4-8766520845e9.jpg?v=1789091051"},{"product_id":"player-one-type-c-to-type-c-usb2-0-cable-0-5m","title":"Player One Type-C to Type-C USB2.0 Cable - 0.5m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e0.5 Meter Length\u003c\/li\u003e\n\u003cli\u003eType-C to Type-C Connectors\u003c\/li\u003e\n\u003cli\u003eUSB2.0 Standard\u003c\/li\u003e\n\u003cli\u003eDesigned for Player One Cooled Cameras and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eType-C to Type-C USB2.0 Cable 0.5M\u003c\/h2\u003e\n\u003cp\u003eThis Type-C to Type-C USB2.0 cable provides a dedicated, 0.5M connection for integrating accessories within the Player One Astronomy ecosystem. It is engineered specifically for linking Player One cooled cameras to peripherals that use a Type-C port for control, such as the Phoenix filter wheel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 0.5M USB2.0 Cable for Player One Accessory Control\u003c\/h3\u003e\n\u003cp\u003eThis 0.5M cable is the ideal length for connecting a Player One cooled camera to a nearby accessory like the Phoenix filter wheel without excess slack. Its short length ensures clean cable management on a complex imaging rig, significantly reducing the risk of snags or cable drag that can interfere with tracking. As a USB2.0 cable, it's designed for reliable device control signals rather than the high-speed data transfer handled by the camera's main data port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary purpose of this 0.5M Player One Type-C cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is designed to connect a Player One cooled camera to another Player One accessory that uses a Type-C port for power or data, such as the Phoenix filter wheel. Its 0.5M length is optimized for short, clean connections on a telescope rig.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow would I use the 0.5M Type-C cable to connect my Player One camera to a Phoenix filter wheel?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou would connect one Type-C end to the designated accessory port on your Player One cooled camera and the other end to the Type-C port on the Phoenix filter wheel. This single cable provides the necessary communication link for controlling the wheel from your imaging software via the camera's hub.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 0.5M length of this Player One cable suitable for most astrophotography setups?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, for its intended purpose, the 0.5M length is ideal. It is meant for connecting devices that are mounted close together on the same optical tube assembly, such as a camera and a filter wheel. This minimizes loose cables that could snag on the mount or other equipment during an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Player One cable a high-speed USB 3.0 cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is a \u003cstrong\u003eUSB2.0\u003c\/strong\u003e cable. It is intended for sending control signals and providing power to low-bandwidth accessories, not for the high-speed image data transfer from the camera sensor itself. Your camera's main data connection will use a separate, high-speed USB 3.0 cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat type of connectors does the Player One 0.5M cable have?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe cable features a \u003cstrong\u003eType-C connector on both ends\u003c\/strong\u003e, making it suitable for modern devices within the Player One ecosystem that have adopted this standard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 0.5M Type-C cable to charge my phone?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile it may technically work for charging devices with Type-C ports, it is sold and intended for use with Player One astronomy accessories. Its length and specifications are optimized for that specific application on an imaging rig.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.5 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eType-C to Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eType-C to Type-C USB2.0 Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913430561053,"sku":"POA-TYPE-C-C-USB2.0-0.5M","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-Type-C-to-Type-C-USB2-0-Cable-0-5M-1_03a5ddfd-b950-4fdd-a10f-c4f8c865bac5.jpg?v=1789091058"},{"product_id":"player-one-usb-2-0-cable-2-meters","title":"Player One USB 2.0 Cable - 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e2 Meter Length\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 Interface\u003c\/li\u003e\n\u003cli\u003eShielded Flat Cable Design\u003c\/li\u003e\n\u003cli\u003eOptimized for Astrophotography Data Stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePlayer One USB 2.0 Cable - 2 Meters\u003c\/h2\u003e\n\u003cp\u003eThis Player One USB 2.0 data cable provides a stable 2-meter connection engineered specifically for the demands of astrophotography. Its shielded, flat construction is designed to reject electromagnetic interference, ensuring reliable data transfer over its full 2-meter length from your camera to your computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eShielded Flat Cable Design: A 2-Meter Solution for EMI Rejection\u003c\/h3\u003e\n\u003cp\u003eIn an astrophotography setup crowded with electronics, from mount controllers to dew heaters, electromagnetic interference (EMI) is a common source of dropped frames and corrupted data. This 2-meter cable features a built-in shielding layer within its flat design, actively protecting the USB 2.0 signal from external noise for stable, uninterrupted communication.\u003c\/p\u003e\n\u003cp\u003eThe flexible, flat profile is more than an aesthetic choice; it resists tangling and has a lower profile than traditional round cables, simplifying cable management around the mount. This design reduces the risk of snags during slewing and tracking, a critical consideration for long imaging sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is a shielded USB 2.0 cable like this 2-meter Player One model important for astrophotography?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIn an astrophotography setup, electronics like mount controllers and dew heaters can create electromagnetic interference (EMI). This Player One cable's built-in shielding protects the data signal, preventing dropped frames and ensuring stable communication between your camera and computer over its full 2-meter length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 2-meter cable be long enough for connecting a guide camera on an 8\" SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 2-meter length is generally sufficient for connecting a guide camera or main imaging camera on a telescope like an 8\" SCT to a mini-PC on the mount or a laptop on a nearby accessory tray. It provides enough slack to accommodate telescope movement without pulling or snagging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the flat design on the Player One USB cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe flexible, flat profile resists tangling and has a lower profile than traditional round cables. This simplifies cable management and reduces the risk of the cable snagging on the mount or tripod during slewing and tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm experiencing dropped frames with my camera. Could this Player One USB 2.0 cable help?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, dropped frames are often a symptom of a poor data connection or electromagnetic interference. Using a high-quality, shielded cable like this one from Player One can often resolve these issues by providing a more stable and noise-resistant data link than a generic, unshielded cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this Player One cable for other USB 2.0 astronomy devices?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. While optimized for cameras, this 2-meter shielded cable is an excellent choice for any USB 2.0 astronomy accessory, such as a filter wheel or electronic focuser, where a reliable data connection is critical for proper function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy use a USB 2.0 cable when USB 3.0 is available?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMany guide cameras, filter wheels, and focusers use the USB 2.0 standard, which requires less power and is less susceptible to certain types of interference over long runs. For devices that don't require the high bandwidth of USB 3.0, a well-made USB 2.0 cable provides a highly reliable connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913430790429,"sku":"POA-USB2-2M","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-USB2-0-cable-2-meters-1_17addec8-7a04-4e8e-a211-df31c71858e7.jpg?v=1789091066"},{"product_id":"player-one-st4-compatible-autoguider-cable","title":"Player One ST4 Compatible Autoguider Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eEnables direct hardware-based pulse guiding\u003c\/li\u003e\n\u003cli\u003eConnects ST4 guide cameras to ST4 mount ports\u003c\/li\u003e\n\u003cli\u003eStandard RJ-12 connectors\u003c\/li\u003e\n\u003cli\u003eBypasses PC-to-mount driver complexities\u003c\/li\u003e\n\u003cli\u003eGenerous length for cable management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eST4 Compatible Autoguider Cable\u003c\/h2\u003e\n      \u003cp\u003eThis ST4 compatible autoguider cable provides the essential physical link between your guide camera and equatorial mount, enabling direct hardware-based pulse guiding for sharp, long-exposure astrophotographs. By connecting the camera's ST4 output directly to the mount's autoguider input, it creates a simple and robust connection that bypasses potential software driver conflicts. This cable is the standard for achieving precise tracking corrections with virtually any ST4-equipped camera and mount combination.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eReliable Hardware Guiding for Astrophotography\u003c\/h3\u003e\n      \u003cp\u003eThe ST4 standard sends guide corrections directly from the camera's processor to the mount's motors as electrical signals, a method known as \"pulse guiding.\" This approach is exceptionally reliable, as it eliminates the PC and its operating system as a point of failure in the guiding loop. For portable setups or imagers who prioritize stability over logging detailed guide metrics, an ST4 cable offers a dependable, set-and-forget solution.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eUniversal ST4 Mount and Camera Connectivity\u003c\/h3\u003e\n      \u003cp\u003eThis cable uses the standard 6-pin RJ-12 connector common to all ST4 guide ports. One end plugs into the port labeled \"GUIDE\" or \"ST4\" on your autoguiding camera, while the other connects to the \"Auto Guide\" or \"ST4\" port on your equatorial mount. Its length is sufficient for most telescope configurations, preventing snags or pulls during slewing without creating excessive cable clutter.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the ST4 Autoguider Cable used for?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis cable is used to connect an autoguiding camera directly to an equatorial mount's autoguider port. This allows your guiding software (like PHD2) to send small movement corrections to the mount, ensuring it tracks a guide star precisely and results in sharp, pinpoint stars in your final image.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhen should I use ST4 guiding instead of ASCOM pulse guiding with this cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eST4 guiding is a great choice for simplicity and reliability. Choose ST4 if:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eYou want the simplest setup:\u003c\/strong\u003e It's a direct hardware connection that bypasses PC driver layers.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eYou have an older mount:\u003c\/strong\u003e Some legacy mounts have ST4 ports but lack reliable ASCOM drivers.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eYou prioritize stability:\u003c\/strong\u003e By removing the PC-to-mount software link from the guiding process, you eliminate a potential point of failure.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eASCOM pulse guiding (which uses a USB cable from PC to mount) is preferred when you want to log guide pulses or avoid an extra cable running to the mount head.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I set up my software to use this ST4 Autoguider Cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eIn your guiding software, such as PHD2, you will connect to your guide camera as usual. However, in the mount connection settings, you will select \"On-camera\" or \"ST4\" instead of an ASCOM driver. This tells the software to send guide commands through the camera and this cable, rather than through a separate mount connection.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this ST4 cable work for guiding on the Moon or Jupiter?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. While typically used for deep-sky guiding on stars, this cable can be used with planetary imaging software that supports ST4 guiding. This allows the software to use features on the planet's surface (like a crater on the Moon or a cloud band on Jupiter) as a \"guide star\" to keep the object perfectly centered on the sensor during high-frame-rate video capture.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this ST4 Autoguider Cable compatible with my Sky-Watcher EQ6-R Pro mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, absolutely. The Sky-Watcher EQ6-R Pro, like almost all modern equatorial mounts designed for astrophotography, features a standard ST4 \"Auto Guide\" port. This cable will connect directly between that port and the ST4 port on any compatible guide camera.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need special drivers to use this ST4 Autoguider Cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, you do not need any specific drivers for the cable itself. The ST4 connection is a direct hardware protocol. Your computer only needs the driver for your guide camera; the guiding commands are then passed through the camera to the mount via this cable without any additional software.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eAny guide camera and mount with an ST4 (RJ-12) port\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e6-Pin RJ-12\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eST4 Autoguider Cable\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cp\u003e\u003ca title=\"Player One 2-Year Warranty\" href=\"https:\/\/davidastro.com\/pages\/player-one-warranty-policy\" target=\"_blank\"\u003ePlayer One 2-Year Warranty\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Player One","offers":[{"title":"Default Title","offer_id":52913431052573,"sku":"POA-ST4-2M","price":8.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PlayerOne-ST4-Compatible-Autoguider-Cable-2M-1_2b5b5318-bd2d-4bc6-8648-a17931997a20.jpg?v=1789091073"},{"product_id":"ioptron-8415","title":"iOptron Controller Cable - 6P4C","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e6P4C (6 Position, 4 Conductor) Connector\u003c\/li\u003e\n\u003cli\u003eStandard Replacement for Telescope Hand Controllers\u003c\/li\u003e\n\u003cli\u003eFlexible Coiled or Straight Cable Design\u003c\/li\u003e\n\u003cli\u003eDurable Locking Tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eController Cable - 6P4C\u003c\/h2\u003e\n      \u003cp\u003eThis Controller Cable is a direct replacement cable for connecting a telescope mount's hand controller to the main control board, utilizing the common 6P4C connector standard. The 6P4C plug, often visually similar to a telephone handset jack, ensures a secure, locking connection for reliable communication between your controller and mount.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003e6P4C Connector: The Standard for Hand Controller Connections\u003c\/h3\u003e\n      \u003cp\u003eThe 6P4C (6 Position, 4 Conductor) connector has been adopted by many major telescope manufacturers for their GoTo systems. This cable serves as a fundamental link, carrying power and data signals that allow your hand controller to command the mount's motors for slewing, tracking, and alignment procedures.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSecure Connection:\u003c\/strong\u003e The plastic locking tab on the 6P4C connector prevents accidental disconnection during an observing session, which could otherwise interrupt tracking or cause a loss of alignment.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eCommon Application:\u003c\/strong\u003e This cable style is frequently used for the primary hand-controller-to-mount connection on systems from brands like Celestron (NexStar\/CGX), Sky-Watcher (SynScan), and others.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eCritical Compatibility Check: Verifying Your Mount's Pinout\u003c\/h3\u003e\n      \u003cp\u003eWhile the 6P4C connector itself is standardized, the internal wiring arrangement, or \"pinout,\" is not. Different manufacturers—and sometimes even different mount models from the same manufacturer—use different pinouts for their controller ports.\u003c\/p\u003e\n      \u003cp\u003eUsing a cable with an incorrect pinout can lead to erratic behavior or, in worst-case scenarios, damage to the electronics in your mount or hand controller. It is essential to confirm that this replacement cable's pinout matches the specific requirements of your telescope mount before connecting it. Consult your mount's original documentation to verify compatibility.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 6P4C cable work with my Celestron NexStar 8SE mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eMany Celestron mounts, including the NexStar series, use a 6P4C cable for the hand controller. However, you must \u003cstrong\u003everify the pinout\u003c\/strong\u003e. A \"straight-through\" telephone handset cord will not work and may cause damage. This cable is intended as a like-for-like replacement for the original Celestron controller cable.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between a 6P4C and a 6P6C controller cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe numbers refer to the connector's physical size and the number of electrical contacts.\n    \u003cbr\u003e• \u003cstrong\u003e6P4C\u003c\/strong\u003e means 6 Positions, 4 Conductors. The plug has space for six pins, but only the middle four are present and wired. This is common for hand controllers.\n    \u003cbr\u003e• \u003cstrong\u003e6P6C\u003c\/strong\u003e means 6 Positions, 6 Conductors. All six positions in the plug have pins and are wired. This is often used for autoguider (ST-4) ports or auxiliary ports that require more connections.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a standard telephone handset cord as a replacement 6P4C controller cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003e\u003cstrong\u003eNo, you should not.\u003c\/strong\u003e While they use the same 6P4C connector, standard telephone handset cords have a \"crossover\" or \"reverse\" pinout. Telescope controller cables typically require a \"straight-through\" pinout. Using a phone cord can connect power to data lines, potentially damaging your mount's electronics permanently.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eMy hand controller doesn't power on with this new 6P4C cable. What should I check?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eFirst, ensure the cable is fully seated and the locking tabs have clicked into place on both the mount and the hand controller. Second, confirm that the mount itself is powered on and receiving adequate voltage. If it still doesn't work, the issue may be an incorrect pinout for your specific mount model, so double-check the cable's compatibility against your mount's requirements.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat does the \"6P4C\" in Controller Cable mean?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003e\"6P4C\" is a standard designation for a modular electrical connector. It stands for \u003cstrong\u003e6 Position, 4 Conductor\u003c\/strong\u003e. This means the plastic plug has six available positions for pins, but only the central four positions are fitted with metal conductors to carry a signal.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this 6P4C cable for connecting my Sky-Watcher mount to a PC?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, this cable is typically for connecting the SynScan hand controller to the mount's hand controller (HC) port. To connect a Sky-Watcher mount to a PC for computer control, you generally need a different cable, often a USB-to-Serial adapter that connects to the bottom of the hand controller.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e6P4C (6 Position, 4 Conductor)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTelescope Hand Controller to Mount Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eController Cable - 6P4C\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  Please see manufacturer's warranty policy for details.\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917308883229,"sku":"IOP-8415","price":25.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Controller-Cable-6P4C-1_af3b61b5-e0f1-41f6-97dc-b9c759c1bfeb.jpg?v=1789142491"},{"product_id":"ioptron-8415-6p6c","title":"iOptron Controller Cable - 6P6C","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e6-Position, 6-Conductor (6P6C) Connector\u003c\/li\u003e\n\u003cli\u003eConnects Hand Controller to Mount\u003c\/li\u003e\n\u003cli\u003eEnsures Reliable GoTo Communication\u003c\/li\u003e\n\u003cli\u003eStandard Replacement for Many Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eController Cable - 6P6C\u003c\/h2\u003e\n      \u003cp\u003eThis Controller Cable - 6P6C provides the essential electronic link between your telescope's hand controller and the mount's drive system. A secure, high-integrity connection is critical for accurate GoTo slewing and uninterrupted tracking, and this 6-position, 6-conductor cable is built to the standard required by many popular computerized mounts.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eReliable GoTo Commands: The Critical 6P6C Link\u003c\/h3\u003e\n      \u003cp\u003eThe stability of your entire GoTo system depends on the simple cable connecting the controller to the mount. Intermittent contact or a poor connection can lead to failed alignments, erratic slewing, and lost communication mid-session. This 6P6C cable ensures that every command from your hand controller is transmitted cleanly to the mount's motors.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePrevents Signal Loss:\u003c\/strong\u003e A firm-fitting 6P6C connector minimizes the risk of accidental disconnection or signal drop during an observation session.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eMaintains Accuracy:\u003c\/strong\u003e Ensures that precise commands for slewing, guiding, and tracking are delivered without corruption, which is crucial for astrophotography.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eThe Universal 6P6C Standard\u003c\/h3\u003e\n      \u003cp\u003eThe 6P6C (6-Position, 6-Conductor) connector, often referred to as an RJ12, is a common standard for telescope peripherals. This cable serves as a direct replacement for the original cable supplied with many GoTo telescope mounts, making it an essential spare part to keep in your accessory case.\u003c\/p\u003e\n      \u003cp\u003eBefore purchasing, it is critical to verify the port type on your specific hand controller and mount. While 6P6C is widely used, some systems may use a different connector, such as a 4-pin or 8-pin variant.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is a 6P6C Controller Cable used for in astronomy?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eA \u003cstrong\u003e6P6C Controller Cable\u003c\/strong\u003e is the standard communication link between a telescope's hand controller (like a Celestron NexStar+ or iOptron Go2Nova) and the main control board in the telescope mount. It transmits all user commands, including GoTo slewing, tracking rate changes, and alignment data.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 6P6C cable work with my iOptron CEM40 or Celestron AVX mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eMany iOptron and Celestron mounts use the \u003cstrong\u003e6P6C (RJ12) standard\u003c\/strong\u003e for their hand controller ports. However, manufacturers can change specifications over time. Always confirm by checking your mount's manual or visually inspecting the port on both the hand controller and the mount to ensure they match the 6-pin connector on this cable.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between this 6P6C cable and a standard telephone cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eWhile they may look similar, there can be a critical difference in the internal wiring. A standard telephone cable (RJ11) is often 4-pin (6P4C) and may have a \"crossover\" or \"rolled\" wiring configuration. A telescope \u003cstrong\u003e6P6C cable\u003c\/strong\u003e must have a \"straight-through\" wiring configuration with all six conductors connected pin-to-pin to function correctly. Using the wrong type of cable can cause communication errors or even damage your mount's electronics.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCould a faulty Controller Cable cause problems with my mount's alignment or tracking?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eAbsolutely. A faulty or intermittent \u003cstrong\u003eController Cable\u003c\/strong\u003e is a common source of troubleshooting issues. Symptoms can include:\n    \u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eFailure to complete the initial star alignment.\u003c\/li\u003e\n    \u003cli\u003eThe mount slewing to the wrong coordinates.\u003c\/li\u003e\n    \u003cli\u003e\"No Response\" errors on the hand controller.\u003c\/li\u003e\n    \u003cli\u003eSudden loss of tracking during an exposure.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    Having a spare, known-good cable is one of the easiest ways to diagnose these problems in the field.\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy should I have a spare 6P6C Controller Cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe controller cable is one of the most frequently handled components of your setup and is subject to wear, accidental tugs, and pin damage. A failure in the field can end your observing session immediately. A spare \u003cstrong\u003e6P6C Controller Cable\u003c\/strong\u003e is a small, inexpensive piece of insurance to keep in your accessory case.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I properly care for my Controller Cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eTo maximize the life of your \u003cstrong\u003e6P6C Controller Cable\u003c\/strong\u003e, avoid sharp bends or kinks in the wire. When not in use, coil it loosely rather than wrapping it tightly around the hand controller. Ensure the plastic locking tabs on the connectors do not get bent or broken, as this will prevent a secure connection.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e6-Position, 6-Conductor (6P6C) \/ RJ12\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTelescope Mount Hand Controller Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eController Cable - 6P6C\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eDavid Astro General Accessories Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917310095645,"sku":"IOP-8415-6P6C","price":28.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Controller-Cable-6P6C-1_3f540b37-9b1b-434d-b42e-f104f611d06f.jpg?v=1789142500"},{"product_id":"ioptron-8416","title":"iOptron USB Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eStandard USB Connection\u003c\/li\u003e\n\u003cli\u003eFor Astronomy Cameras, Mounts, and Accessories\u003c\/li\u003e\n\u003cli\u003eIdeal as a Spare or Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUSB Cable\u003c\/h2\u003e\n\u003cp\u003eThis standard USB Cable provides a reliable data and power connection for a wide range of astronomy accessories. It is an essential component for linking your camera, mount, or other peripherals to a control computer, ensuring stable communication throughout your observing or imaging sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Standard Cable for Astronomy Accessories\u003c\/h3\u003e\n\u003cp\u003eWhether replacing a lost cable or adding a spare to your field kit, this USB cable serves as a fundamental link in your setup. Connection problems are a frequent source of trouble in the field; having a dependable spare can prevent a simple cable failure from ending a night of observation prematurely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is this USB Cable typically used for in an astronomy setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is a general-purpose USB cable intended for connecting astronomy hardware to a host computer. Common uses include linking a CMOS or CCD camera for image download, connecting a GoTo mount for software control, or linking accessories like filter wheels and focusers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if this USB Cable is compatible with my equipment?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eCompatibility depends on the physical connector type required by your hardware (e.g., USB-A, USB-B, USB-C). As this is a standard cable, you must \u003cstrong\u003everify the specific port type on your device\u003c\/strong\u003e before purchasing to ensure it matches. This information is typically found in your product's manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the length and data speed of this USB Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eSpecific details such as cable length and USB version (e.g., USB 2.0, USB 3.0) are not specified. This product is offered as a basic, standard-use replacement cable. For high-frame-rate planetary imaging or other data-intensive tasks, ensure you select a cable that explicitly meets the speed requirements of your camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this USB Cable to power a cooled astronomy camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. While USB can power some very low-draw devices, \u003cstrong\u003ecooled astronomy cameras require a dedicated 12V DC power supply\u003c\/strong\u003e. Attempting to power a cooled camera over USB will not work and is not the intended use for this type of data cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this USB Cable work for connecting my laptop to a Celestron NexStar or iOptron GoTo mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIf your mount's hand controller or the mount itself features a USB port for computer control, a standard USB cable like this one should establish the necessary connection. This allows you to use planetarium software like Stellarium or other control applications. Always confirm the required port type in your mount's documentation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is it a good idea to have a spare USB Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eCables are a common failure point in any portable equipment setup. They can be accidentally damaged, bent, or simply wear out over time. Having a tested spare in your accessory case is one of the easiest ways to troubleshoot connection problems in the field and can save an entire imaging session from being lost.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eUSB Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlease check with the original manufacturer of your product for warranty details.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917310587165,"sku":"IOP-8416","price":28.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-USB-Cable-8416-1_d8e9945c-578b-4f50-9489-d71223de142e.jpg?v=1789142518"},{"product_id":"qhyccd-usb3-0cable","title":"QHYCCD USB 3.0 Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eOfficial QHYCCD Replacement Part\u003c\/li\u003e\n\u003cli\u003eUSB 3.0 High-Speed Interface\u003c\/li\u003e\n\u003cli\u003eEnsures Reliable Camera-to-PC Data Transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eQHYCCD USB 3.0 Cable\u003c\/h2\u003e\n\u003cp\u003eThis is the official replacement USB 3.0 data cable for QHYCCD cameras, engineered to provide a reliable high-speed data link between your camera and host computer. It is the same type of cable QHYCCD supplies with many of its cameras, ensuring full compatibility and stable communication for your imaging sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eOfficial Replacement Cable for QHYCCD Cameras\u003c\/h3\u003e\n\u003cp\u003eIf your original cable is lost or damaged, this is the factory-specified replacement. It is the same USB 3.0 cable that ships with cameras like the QHY367C, QHY294M, QHY183, and QHY5III462, guaranteeing the connection meets the manufacturer's requirements for data integrity and speed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eProper Connection Sequence for Cooled QHYCCD Cameras\u003c\/h3\u003e\n\u003cp\u003eFor stable operation with cooled QHYCCD cameras, a specific connection sequence is critical. Always connect the 12V power supply to the camera first, wait a moment for it to initialize, and then connect this USB 3.0 cable to both the camera and the computer. This order ensures the computer properly recognizes the device and all its functions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is this QHYCCD USB 3.0 Cable used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is an official factory replacement USB 3.0 cable for QHYCCD cameras. It is intended to replace a lost or damaged cable to ensure a reliable, high-speed data connection between your camera and computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this USB 3.0 cable work with my QHY183 camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This is the same model of USB 3.0 cable that QHYCCD ships in the box with the QHY183, as well as other cameras like the QHY367C, QHY294M, and QHY5III462. It is fully compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the correct way to connect my cooled QHYCCD camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo ensure your computer recognizes the camera correctly, you must follow a specific power-up sequence. First, connect the \u003cstrong\u003e12V power supply\u003c\/strong\u003e to the camera. Second, connect the \u003cstrong\u003eUSB 3.0 cable\u003c\/strong\u003e between the camera and the computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy computer isn't recognizing my cooled QHYCCD camera. Could the cable be the issue?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile a faulty cable is possible, first check your connection sequence. The most common reason for a cooled QHYCCD camera not being recognized is connecting the USB 3.0 cable before the 12V power supply. Disconnect both, connect the 12V power first, then connect the USB cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this a standard USB 3.0 cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, it uses standard USB 3.0 connectors. However, it is specifically the model tested and supplied by QHYCCD for use with their sensitive astronomical cameras, ensuring it meets their standards for stable data transfer during imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a longer USB 3.0 cable with my QHYCCD camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile you can try other cables, using a cable longer than the one supplied by QHYCCD can sometimes lead to data transmission errors or a less stable connection, particularly during high-frame-rate planetary imaging. For maximum reliability, it is recommended to use the official QHYCCD cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eData Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eQHYCCD Cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942992277789,"sku":"QHY-030006","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-USB3-0-Cable-1_65e18631-279d-4c46-8db2-ffd82d99a624.jpg?v=1789615091"},{"product_id":"qhyccd-usb2-0-cable","title":"QHYCCD USB2.0 Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eReplacement USB 2.0 Cable\u003c\/li\u003e\n\u003cli\u003eFor QHYCCD QHYCFW3 Filter Wheels\u003c\/li\u003e\n\u003cli\u003eProvides Both Power and Data Control\u003c\/li\u003e\n\u003cli\u003eEnables Standalone Filter Wheel Operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUSB2.0 Cable\u003c\/h2\u003e\n\u003cp\u003eThis USB 2.0 cable is a direct replacement for the one supplied with QHYCCD's QHYCFW3 series filter wheels. It allows the filter wheel to be controlled and powered directly from a computer, enabling standalone operation when not connected to a QHYCCD camera's dedicated filter wheel port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePower and Control for QHYCCD Filter Wheels\u003c\/h3\u003e\n\u003cp\u003eWhile this cable can power the QHYCFW3 directly over USB, the filter wheel's power consumption can exceed the limit of some standard computer USB ports. This can sometimes result in unreliable connectivity. If you experience this issue, the filter wheel should be powered via its separate 12V power port. In this configuration, this USB cable continues to provide stable data communication for computer control, ensuring your imaging sequence runs without interruption.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is this USB2.0 Cable primarily used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is a replacement USB 2.0 cable intended for use with QHYCCD QHYCFW3 filter wheels. It provides both data communication for control and power for standalone operation, separate from a QHY camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy might my QHYCFW3 filter wheel not work reliably with just USB power?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe QHYCFW3 filter wheel can draw more current than some computer USB 2.0 ports are designed to supply. While many ports work fine, those with lower power output may cause the filter wheel to disconnect. In these cases, it is recommended to power the wheel with a separate 12V supply and use this USB cable for data only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I power my QHYCFW3 with a 12V adapter, do I still need this USB cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, if you wish to control the filter wheel from a computer. When using an external power supply, this USB cable is still required to transmit commands between your imaging software and the filter wheel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this a proprietary QHYCCD cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile it is the standard replacement part for QHYCCD accessories, it is a standard USB 2.0 cable. It should be compatible with other astronomical devices that use the same physical USB connectors, though it is sold and supported as a QHY accessory.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need this cable if my QHYCFW3 is connected to my QHY camera's filter wheel port?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. When your QHYCFW3 is connected to a compatible QHYCCD camera via the 4-pin filter wheel port, both power and control are handled through that single connection. This USB cable is only needed for standalone operation when connected to a computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCould a faulty USB cable cause my filter wheel to malfunction?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. A damaged or worn-out USB cable is a common cause of intermittent connection problems for any astronomy accessory. Having a reliable spare like this one on hand can prevent a lost night of imaging while troubleshooting connectivity issues.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942992507165,"sku":"QHY-030001","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-USB2-0-Cable-1_cbf140e8-d9fe-4215-ba71-ebb614742ffb.jpg?v=1789615099"},{"product_id":"qhyccd-usb-cable-for-polemaster","title":"QHYCCD USB Cable for PoleMaster","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eOfficial Replacement Cable\u003c\/li\u003e\n\u003cli\u003eFor QHY PoleMaster\u003c\/li\u003e\n\u003cli\u003eProvides Power and Data\u003c\/li\u003e\n\u003cli\u003eEnsures Reliable Connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUSB Cable for PoleMaster\u003c\/h2\u003e\n\u003cp\u003eThis is the official replacement USB cable for the QHY PoleMaster electronic polar scope. It is designed to provide a reliable data and power connection between your PoleMaster unit and your control computer, ensuring your polar alignment process is seamless and uninterrupted. If your original cable is lost, damaged, or you simply need a spare for your field kit, this is the correct manufacturer-specified part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Direct Replacement for Your PoleMaster Connection\u003c\/h3\u003e\n\u003cp\u003eThe QHY PoleMaster relies on a stable USB connection to function. This cable is the direct replacement for the one included with your device, guaranteeing correct fit and electronic compatibility. Don't risk connection drops during a critical alignment with a generic cable; use the part designed specifically for the task.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is this USB Cable for PoleMaster used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable connects your \u003cstrong\u003eQHY PoleMaster\u003c\/strong\u003e to a USB port on your computer. This single connection provides both the necessary \u003cstrong\u003epower\u003c\/strong\u003e for the PoleMaster's camera and the \u003cstrong\u003edata link\u003c\/strong\u003e for the software to display the image and calculate your polar alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this an official QHYCCD cable for the PoleMaster?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is the official manufacturer-supplied replacement cable for the QHY PoleMaster. It ensures proper fit, power delivery, and data integrity as intended by the manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I need a replacement USB cable for my PoleMaster?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eCables can be a point of failure in any imaging setup, especially in the field. Common reasons for needing a replacement include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccidental Damage:\u003c\/strong\u003e Cables can be pinched, kinked, or stepped on in the dark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLost Cable:\u003c\/strong\u003e It's easy to misplace a small cable when packing up after a long night.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Issues:\u003c\/strong\u003e Over time, the connectors can wear, leading to intermittent connection problems. Having a spare is good practice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill a generic USB cable work with the PoleMaster?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile some other USB cables with the correct connectors might work, they may not provide the same reliable connection or shielding as the official cable. Using the manufacturer-specified cable eliminates a potential source of error in your polar alignment routine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this single USB cable handle both power and data for the PoleMaster?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The PoleMaster is powered entirely through the USB port. This cable provides the power to run the internal camera and electronics, as well as the data connection to transfer the live video feed to your computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs any software required to use the PoleMaster with this cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, you still need the QHY PoleMaster software and drivers installed on your computer. This cable is the physical link that allows the software to communicate with the device. You can find the latest software on the QHYCCD download page.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942993195293,"sku":"QHY-030026","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-USB-Cable-for-PoleMaster-1_ea256531-45b4-47cc-bc3d-e06465b4d4c3.jpg?v=1789615114"},{"product_id":"qhyccd-st-4-guiding-cable-for-qhy5iii-series","title":"QHYCCD ST-4 Guiding Cable for QHY5III Series","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects QHY5III Series cameras to an ST-4 autoguider port\u003c\/li\u003e\n\u003cli\u003eEnables direct, hardware-level guide corrections\u003c\/li\u003e\n\u003cli\u003eStandard connector for most equatorial mounts\u003c\/li\u003e\n\u003cli\u003eReliable communication for precise tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eST-4 Guiding Cable for QHY5III Series\u003c\/h2\u003e\n\u003cp\u003eThis ST-4 Guiding Cable provides the essential physical link between your QHY5III series guide camera and the autoguider port on your equatorial mount. It enables your imaging software to send direct, hardware-based correction signals to the mount's motors for precise, sub-pixel tracking during long-exposure astrophotography.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDirect Mount Correction for the QHY5III Series\u003c\/h3\u003e\n\u003cp\u003eThe ST-4 standard is a direct, reliable method for autoguiding. This cable transmits simple on\/off signals for each of the four cardinal directions (RA+, RA-, Dec+, Dec-), bypassing the complexities of software-based pulse guiding through a computer's serial or USB port. This results in a robust, low-latency connection that is essential for maintaining sharp, pinpoint stars over many minutes of exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eST-4 vs. Pulse Guiding: When to Use This Cable\u003c\/h3\u003e\n\u003cp\u003eWhile many modern setups use ASCOM pulse guiding over a single USB cable, an ST-4 connection remains a critical tool. It's an indispensable backup if your primary connection fails and is the primary method for guiding with non-ASCOM mounts or setups where minimizing cable runs to the computer is a priority. For imagers seeking the most direct and physically isolated guiding system, the ST-4 cable for your QHY5III camera is the standard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the ST-4 Guiding Cable for QHY5III Series?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable connects your \u003cstrong\u003eQHY5III series camera\u003c\/strong\u003e to the \u003cstrong\u003eST-4 autoguider port\u003c\/strong\u003e on your telescope mount. This allows guiding software, like PHD2, to send correction signals directly to the mount's motors to ensure accurate tracking on a guide star.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich QHYCCD cameras are compatible with this ST-4 cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is specifically designed for the \u003cstrong\u003eQHY5III series\u003c\/strong\u003e of planetary and guide cameras. It connects to the ST-4 compatible port present on these models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need this ST-4 cable if my mount supports ASCOM pulse guiding?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNot necessarily, but it is highly recommended. While ASCOM pulse guiding sends corrections through the main mount connection (USB\/Serial), an ST-4 cable provides a separate, dedicated hardware link. This can be more reliable in some setups and serves as an essential backup if you experience issues with your primary ASCOM connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect this guiding cable between my QHY5III camera and my Sky-Watcher EQ6-R Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eConnecting the cable is straightforward. One end plugs into the guide port on your QHY5III series camera, and the other end plugs into the port labeled \"AUTO GUIDE\" or \"ST-4\" on your Sky-Watcher EQ6-R Pro mount. Once connected, you can select \"On-camera (ST-4)\" as your mount output in your guiding software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this ST-4 Guiding Cable compatible with older QHY5-II series cameras?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is specified for the QHY5III series. While the port may be similar, you should verify compatibility for older camera models. Using the correct cable specified for your camera series ensures proper pinout and reliable communication with the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy mount is a Celestron AVX. Is this the correct cable to use with a QHY5III-462C for guiding?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Celestron AVX mount features a standard ST-4 autoguider port. This cable will correctly link your QHY5III-462C camera to the AVX mount, allowing your software to send guide corrections for precise tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eQHY5III Series Cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eST-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eST-4 Guiding Cable for QHY5III Series\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942993850653,"sku":"QHY-030002","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-ST-4-Guiding-Cable-for-QHY5III-Series-1_ab0f2119-f8a6-48d4-919c-c9690234bcc0.jpg?v=1789615122"}],"url":"https:\/\/davidastro.com\/collections\/cables.oembed?page=2","provider":"David Astro","version":"1.0","type":"link"}