{"title":"Mounting Hardware","description":"\u003cdiv\u003e\n  \u003cp\u003e\n    Flexure is invisible until you see it in your stars. A dovetail that shifts a fraction of a millimetre under load, a guide scope on a soft bracket, a saddle clamping on one point instead of a face — each produces elongation that no processing corrects. David Astro carries mounting hardware items in Canada: dovetail bars and clamps, tube rings, saddles, side-by-side plates and adapter plates, in Canadian stock.\n  \u003c\/p\u003e\n  \u003cp\u003e\n    Getting this right is mostly a matter of matching standards and eliminating single points of contact. Tell us your tube diameter, mount saddle and payload and we will specify hardware that holds it rigidly.\n  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- more --\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eDovetail Standards and Building a Rigid Connection\u003c\/h2\u003e\n  \u003cp\u003e\n    Nearly all mounting hardware follows one of two dovetail standards, and mixing them without the correct clamp is the most common cause of a telescope sitting loose on an otherwise good mount.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVixen-style dovetail (approximately 44 mm):\u003c\/strong\u003e The lighter standard, fine for small refractors and visual loads up to a few kilograms.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLosmandy-style dovetail (approximately 75 mm):\u003c\/strong\u003e The wider, stiffer standard used for heavier optics and imaging trains where flexure must be minimized.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/rings\"\u003eTube rings:\u003c\/a\u003e\u003c\/strong\u003e Sized to the tube's outer diameter and lined to protect it; rings allow rotation for framing without unbolting the optic.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/saddles\"\u003eMount saddles:\u003c\/a\u003e\u003c\/strong\u003e The receiving clamp on the mount head. Dual-fit saddles accept both standards, and face-clamping designs grip more securely than a single point screw.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/side-by-side\"\u003eSide-by-side plates:\u003c\/a\u003e\u003c\/strong\u003e Carry two optical tubes on one mount with balance adjustment in both axes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/adapter-plates\"\u003eAdapter plates:\u003c\/a\u003e\u003c\/strong\u003e Convert between standards, add accessory mounting points, or raise a guide scope clear of an obstruction.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eWhy Choose David Astro for Mounting Hardware\u003c\/h2\u003e\n  \u003cp\u003e\n    Rigidity is cumulative. Every joint between the optic and the mount either holds or contributes to the error you spend the night chasing.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStandard matching:\u003c\/strong\u003e We confirm your mount's saddle type and specify a dovetail that fits it fully, rather than one that seats on an edge.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlexure diagnosis:\u003c\/strong\u003e If your guiding shows drift that guiding corrections cannot fix, we will look at the mechanical chain with you — usually it is a guide scope bracket or an undersized dovetail.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTube diameter fitting:\u003c\/strong\u003e Rings are matched to actual measured outer diameter, since nominal aperture and tube diameter are not the same number.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAuthorized dealer:\u003c\/strong\u003e Genuine hardware with full manufacturer warranty, shipped from Canadian stock.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNo cross-border fees:\u003c\/strong\u003e Canadian orders ship domestically with no duties or brokerage charges.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eMounting Hardware in Canada — Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003e\u003cstrong\u003eVixen or Losmandy dovetail?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eLosmandy for anything above roughly 7 kg or for imaging where flexure matters. Vixen is adequate for smaller refractors and visual use, and is lighter and more common on entry-level mounts.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eCan I put a Vixen bar in a Losmandy saddle?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eOnly with a dual-fit saddle or an adapter clamp. Forcing a narrow bar into a wide clamp results in point contact, which is exactly the condition that causes slipping under load.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eWhy do my stars elongate only on one side of a meridian flip?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eThat pattern usually indicates differential flexure rather than tracking error. Check the guide scope bracket, the dovetail seating and the focuser drawtube, in that order.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eHow do I size tube rings?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eBy the tube's outer diameter, not aperture. Measure the tube itself, or tell us the exact telescope model and we will confirm the correct ring size.\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eChasing flexure?\u003c\/h2\u003e\n  \u003cp\u003eTell us your tube, mount and payload and we will specify hardware that holds it solid. Ships from Canada with expert support.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"celestron-universal-piggyback-mount","title":"Celestron Universal Piggyback Mount","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAttaches a DSLR camera to your telescope's optical tube\u003c\/li\u003e\n\u003cli\u003eEnables long-exposure, wide-field astrophotography\u003c\/li\u003e\n\u003cli\u003eUses your telescope's tracking to eliminate star trails\u003c\/li\u003e\n\u003cli\u003eCompatible with Celestron Schmidt-Cassegrain optical tubes\u003c\/li\u003e\n\u003cli\u003eStandard 1\/4-20 tripod screw for camera mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eCelestron Universal Piggyback Mount\u003c\/h2\u003e\n      \u003cp\u003eThe Celestron Universal Piggyback Mount transforms your existing Schmidt-Cassegrain telescope into a precise, tracking platform for your DSLR camera. By mounting your camera and lens directly onto your telescope's tube, you can leverage the scope's dual-axis motor drive to take multi-minute exposures of the night sky without star trails. This simple accessory unlocks deep, wide-field images of the Milky Way, comets, and large nebulae that are impossible to capture with a stationary camera tripod.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eCapture the Milky Way: Wide-Field Imaging with Your SCT\u003c\/h3\u003e\n      \u003cp\u003eYour SCT is designed for high-magnification views, but many of the sky's most impressive objects are too large to fit in its field. The Piggyback Mount lets you use your favorite camera lenses—from wide-angle to telephoto—to frame vast targets like the North American Nebula (NGC 7000) or the core of the Milky Way, while your telescope does the tracking.\u003c\/p\u003e\n      \u003cp\u003eThis method combines the wide, rich perspective of a camera lens with the precision tracking of a GoTo mount. The result is the ability to use longer exposures and lower ISO settings, producing clean, detailed images that reveal faint dust lanes and nebulosity that would otherwise be lost to noise or motion blur.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n    \n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eSimple, Secure Attachment for NexStar 5, 6, and 8 OTAs\u003c\/h3\u003e\n      \u003cp\u003eThis mount is engineered for a straightforward fit on Celestron's most popular Schmidt-Cassegrain telescopes. It attaches securely to the rear cell of your optical tube, providing a stable platform that won't compromise your telescope's balance or tracking accuracy.\u003c\/p\u003e\n      \u003cp\u003eWhile designed for Celestron SCTs, its function is universal: it provides a standard 1\/4-20 threaded post, the same as a standard photo tripod. This allows you to attach any DSLR or mirrorless camera equipped with a standard tripod socket, turning your astronomical setup into a powerful astrophotography system in minutes.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003ePiggybacking vs. Tripod: The Key to 60-Second+ Exposures\u003c\/h3\u003e\n      \u003cp\u003eAstrophotography with a camera on a standard, stationary tripod is limited by the Earth's rotation; exposures longer than about 20 seconds will show stars as streaks. The Piggyback Mount overcomes this fundamental limitation by making the camera move with the sky.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eStatic Tripod:\u003c\/strong\u003e Star trails appear in short exposures, forcing high ISOs and noisy images. Faint details are impossible to resolve.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePiggyback Mount:\u003c\/strong\u003e Your telescope's drive system cancels out the Earth's rotation. This allows for exposures of 60 seconds, 2 minutes, or even longer (depending on your polar alignment), capturing deep, faint signals with sharp, pinpoint stars.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of photos can I take with the Celestron Universal Piggyback Mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe Celestron Universal Piggyback Mount is ideal for \u003cstrong\u003ewide-field astrophotography\u003c\/strong\u003e. It allows you to use your DSLR and camera lenses to capture large-scale celestial objects and scenes, such as the Milky Way, constellations, meteor showers, and passing comets, all while your telescope tracks the sky to prevent star trails.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Celestron Piggyback Mount attach to my NexStar 8SE?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe mount attaches to existing screw holes on the rear cell of your Celestron 8\" SCT optical tube. You simply unthread the existing screws, place the piggyback mount, and re-secure it with the same screws. Your DSLR camera then attaches to the mount's 1\/4-20 threaded post, just like it would on a tripod.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need a special camera for the Celestron Universal Piggyback Mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, you do not need a specialized astronomy camera. The Celestron Universal Piggyback Mount is designed to be used with any standard \u003cstrong\u003eDSLR or mirrorless camera\u003c\/strong\u003e that has a 1\/4-20 tripod socket on the bottom. It's the perfect way to get started in astrophotography with the camera you already own.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the Celestron Piggyback Mount over a star tracker?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe main advantage is that it lets you use the high-precision GoTo mount you already own as your tracker. You don't need to buy, power, and polar align a separate piece of equipment. If your telescope is aligned, you can simply attach your camera and start taking long-exposure photos immediately.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Celestron Piggyback Mount to capture the Andromeda Galaxy (M31) with a 200mm lens?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eAbsolutely. This is an ideal setup for the Andromeda Galaxy (M31). A 200mm lens provides a perfect field of view to capture the galaxy and its companions, M32 and M110. By using the Celestron Piggyback Mount on a tracking SCT, you can take multi-minute exposures to reveal the faint outer dust lanes of the galaxy.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs my polar alignment critical when using the Celestron Piggyback Mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. The quality of your tracking, and therefore the maximum exposure length you can achieve, is directly dependent on the accuracy of your mount's polar alignment. For an alt-azimuth mount like a NexStar SE, you will experience field rotation on very long exposures, limiting you to around 30-60 seconds. For an equatorially mounted scope, a precise polar alignment can allow for exposures of several minutes.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eCelestron Schmidt-Cassegrain Telescopes (5\", 6\", 8\", etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCamera Mounting\u003c\/td\u003e\n\u003ctd\u003eStandard 1\/4\"-20 threaded post\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eCelestron Universal Piggyback Mount\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Universal_Piggyback_Mount_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron Universal Piggyback Mount Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184597277,"sku":"CEL-93609","price":61.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-Universal-Piggyback-Mount-93609-1__95983.1594230528.1280.1280.jpg?v=1684338355"},{"product_id":"celestron-11-inch-dovetail-bar-cge","title":"Celestron 11-inch Dovetail bar - CGE","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e11-inch Overall Length\u003c\/li\u003e\n\u003cli\u003eCGE \"Wide\" Dovetail Standard\u003c\/li\u003e\n\u003cli\u003eEngineered for Celestron CGEM and CGX Mounts\u003c\/li\u003e\n\u003cli\u003eProvides a Rigid, Low-Flexure Connection for Imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron 11-inch Dovetail bar - CGE\u003c\/h2\u003e\n\u003cp\u003eThe Celestron 11-inch Dovetail Bar provides a secure, wide-format CGE mounting platform for optical tubes on Celestron's heavy-duty CGEM and CGX series mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 11-inch CGE Standard: Rigid Mounting for CGEM \u0026amp; CGX Scopes\u003c\/h3\u003e\n\u003cp\u003eThis dovetail bar utilizes the CGE \"wide\" mounting standard, engineered specifically for the higher payload capacities of Celestron's CGEM and CGX equatorial mounts. The wider plate provides a more substantial contact area with the mount saddle, significantly reducing flexure and torsional instability compared to narrower dovetail systems.\u003c\/p\u003e\n\u003cp\u003eAt 11 inches in length, this bar offers a versatile footprint for a wide range of optical tubes. It provides sufficient travel for balancing the telescope, especially when adding accessories like guide scopes, cameras, or heavy eyepieces, ensuring your mount can track accurately without strain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCGE vs. Vixen: Why the \"Wide\" Standard Matters for Stability\u003c\/h3\u003e\n\u003cp\u003eWhile the narrower Vixen-style dovetail is lighter and common on smaller mounts, the CGE standard is the preferred choice for serious imaging. The primary advantage is its superior rigidity. For long-exposure astrophotography, any amount of flexure between the telescope and the mount can lead to trailed stars and compromised images.\u003c\/p\u003e\n\u003cp\u003eBy connecting your optical tube to a CGEM or CGX mount with this matching CGE bar, you create a mechanically sound system from end to end. This ensures that you are leveraging the full stability and tracking precision your heavy-duty Celestron mount was designed to deliver.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between this Celestron CGE dovetail bar and a Vixen-style bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary difference is width and rigidity. The \u003cstrong\u003eCelestron CGE dovetail bar\u003c\/strong\u003e is a \"wide\" or \"D-style\" plate, designed for heavier loads on mounts like the CGEM and CGX. A Vixen-style bar is narrower and lighter, intended for smaller telescopes and mounts with lower capacity, such as the Advanced VX.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 11-inch CGE dovetail bar fit my Celestron Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The Celestron Advanced VX (AVX) mount comes standard with a saddle that accepts the narrower Vixen-style dovetail. This CGE bar is too wide for the stock AVX saddle and is intended for use with CGEM, CGX, and other mounts that accept the wide CGE\/Losmandy D-style plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron 11-inch dovetail bar include mounting screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMounting hardware is not specified as an included item. You will typically use the mounting screws that came with your telescope's tube rings or the optical tube itself to attach the dovetail bar.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if the 11-inch length is right for my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAn 11-inch bar is a common, versatile length suitable for many small-to-medium optical tubes, such as an 8\" SCT or a 4\" refractor. The key is to have enough length to slide the telescope forward and backward in the saddle to achieve perfect balance with your chosen accessories (camera, eyepieces, etc.).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this CGE dovetail bar to mount my 8\" EdgeHD on a CGX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is an excellent combination. The CGX mount uses a CGE-style saddle, and the \u003cstrong\u003e11-inch CGE dovetail bar\u003c\/strong\u003e is a standard choice for securely mounting a Celestron 8\" EdgeHD or standard SCT, providing a rigid connection for both visual use and astrophotography.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Celestron dovetail bar compatible with Losmandy mounts?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the Celestron CGE \"wide\" dovetail format is dimensionally compatible with the \"D-style\" plate used by Losmandy and many other manufacturers. It should work with any mount saddle designed for Losmandy D-style plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_11-inch_CGE_Dovetail_Bar_Diagram.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron 11-inch CGE Dovetail Bar Diagram\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184662813,"sku":"CEL-94219","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-11-inch-Dovetail-bar-CGE-94219-1__53571.1594230529.1280.1280.jpg?v=1684338357"},{"product_id":"celestron-14-inch-dovetail-bar-cge","title":"Celestron 14-inch Dovetail bar - CGE","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAttaches to 14\" Celestron Schmidt-Cassegrain and EdgeHD Optical Tubes\u003c\/li\u003e\n\u003cli\u003eCGE-style dovetail for secure mounting on compatible equatorial mounts\u003c\/li\u003e\n\u003cli\u003eProvides a stable platform for heavy optical systems\u003c\/li\u003e\n\u003cli\u003eLength: 14 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron 14-inch Dovetail Bar (CGE)\u003c\/h2\u003e\n\u003cp\u003eThis 14-inch Celestron CGE Dovetail Bar is the primary mounting rail required to attach a 14-inch Schmidt-Cassegrain or EdgeHD optical tube assembly (OTA) to a high-payload Celestron equatorial mount. Engineered for a precise fit, this dovetail bar provides the structural rigidity needed to carry the largest optical tubes that Celestron offers for serious deep-sky imaging and visual observation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCGE-Standard Mounting for Celestron 14\" Optical Tubes\u003c\/h3\u003e\n\u003cp\u003eThe CGE dovetail format, also known as the D-style plate, is the heavy-duty standard for Celestron's most capable mounts, including the CGEM, CGX, and CGE Pro series. This 14-inch bar is specifically drilled to match the mounting hole patterns on the front and rear cells of Celestron's 14-inch SCT and EdgeHD OTAs, ensuring a direct, secure connection without any modification. Its robust construction prevents flexure, which is critical for maintaining pointing accuracy and achieving sharp, round stars during long exposures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat mounts are compatible with the Celestron 14-inch CGE Dovetail Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bar is designed for Celestron mounts that use the wider CGE-style saddle plate. This includes popular models like the Celestron CGX, CGX-L, CGEM II, and CGE Pro. It is also compatible with mounts from other manufacturers that use the Losmandy \"D-style\" saddle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the correct dovetail for my Celestron 14\" EdgeHD OTA?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This 14-inch CGE dovetail bar has the correct length and pre-drilled hole pattern to attach directly to the front and rear mounting blocks of a Celestron 14-inch EdgeHD or standard Schmidt-Cassegrain optical tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 14-inch dovetail bar for a smaller telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile physically possible if you drill new holes, it is not recommended. The hole spacing is specifically designed for the 14-inch Celestron OTAs. Using a bar that is significantly longer than your optical tube can also create balancing issues and snagging hazards in the dark.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between a CGE and a CG-5 dovetail bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary difference is width. The CGE bar (this product) is wider and more robust, designed for heavier telescopes. The CG-5 style bar (also known as a Vixen-style or V-style bar) is narrower and used for smaller, lighter optical tubes like those found on the Advanced VX mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need a top-mounted dovetail bar as well?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA top-mounted bar is not required for mounting the telescope itself, but it is highly recommended for astrophotography. A second dovetail on top provides a convenient place to mount accessories like a guide scope, a ZWO ASIAIR, or a Celestron StarSense AutoAlign, keeping your imaging rig organized and balanced.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron 14-inch CGE Dovetail Bar include mounting screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMounting hardware is typically included with the telescope's optical tube assembly. Please check the \"In the Box\" tab for this product to confirm if any additional hardware is supplied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Style\u003c\/td\u003e\n\u003ctd\u003eCGE (D-Style)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e14 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eCelestron 14\" SCT\/EdgeHD OTAs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e14-inch Dovetail bar (CGE)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_14-inch_Dovetail_bar_(CGE)_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron 14-inch Dovetail bar (CGE) Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184793885,"sku":"CEL-94218","price":113.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-14-inch-Dovetail-bar-CGE-94218-1__43285.1594230530.1280.1280.jpg?v=1684338371"},{"product_id":"celestron-8-inch-dovetail-bar-cge","title":"Celestron 8-inch Dovetail bar - CGE","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eMounts 8-inch Celestron Optical Tube Assemblies\u003c\/li\u003e\n\u003cli\u003eCGE (Wide) Dovetail Format\u003c\/li\u003e\n\u003cli\u003eCompatible with CGEM, CGEM II, CGX, and CGX-L Mounts\u003c\/li\u003e\n\u003cli\u003eProvides a More Rigid Connection than V-Style Bars\u003c\/li\u003e\n\u003cli\u003eRequired for Mounting 8\" OTAs on Celestron's Larger Equatorial Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron 8-inch Dovetail bar - CGE\u003c\/h2\u003e\n\u003cp\u003eThe Celestron 8-inch CGE Dovetail Bar is the specific wide-format plate required to mount your Celestron 8-inch Schmidt-Cassegrain or EdgeHD optical tube to a heavy-duty equatorial mount like the CGEM, CGEM II, CGX, or CGX-L.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe CGE Standard: A Secure Platform for 8-inch OTAs\u003c\/h3\u003e\n\u003cp\u003eThis dovetail bar uses the wider CGE, or Losmandy D-style, mounting plate standard. This wider profile provides a more rigid and stable connection between your 8-inch telescope and the mount saddle, which is critical for minimizing flexure and vibration during long-exposure astrophotography.\u003c\/p\u003e\n\u003cp\u003eUpgrading from a narrower Vixen-style bar to this CGE plate is essential when moving an 8-inch optical tube to a larger Celestron equatorial mount. The increased surface area and robust design ensure your OTA is securely locked down, protecting your investment and improving tracking accuracy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eFitment Guide: Critical Note for CPC 800 Models\u003c\/h3\u003e\n\u003cp\u003eIf you are de-forking a CPC 800 GPS or CPC Deluxe 800 HD telescope to mount it equatorially, this is the correct bar. However, be aware that this dovetail bar will not fit on these specific OTAs unless you completely remove the stock finderscope bracket first due to physical interference.\u003c\/p\u003e\n\u003cp\u003eThis is a known limitation for these specific models. Once the original finder bracket is removed, the CGE dovetail bar can be installed correctly, allowing you to use your CPC 800 optical tube on a high-capacity German equatorial mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich mounts is the Celestron 8-inch CGE Dovetail Bar compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis dovetail bar is designed for Celestron's larger equatorial mounts that use the CGE wide dovetail saddle. This includes the \u003cstrong\u003eCGEM, CGEM II, CGX, and CGX-L\u003c\/strong\u003e series mounts. It will also fit any non-Celestron mount that uses the Losmandy \"D-style\" saddle plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this CGE dovetail bar fit my CPC 800 telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, but with a critical modification. To install this bar on a CPC 800 GPS or CPC Deluxe 800 HD optical tube, you must \u003cstrong\u003ecompletely remove the factory finderscope bracket\u003c\/strong\u003e from the telescope. The bar will not seat correctly if the finder bracket is still in place.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Celestron 8-inch CGE bar the same as a Vixen-style dovetail?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This is a \u003cstrong\u003eCGE-style (or \"wide\")\u003c\/strong\u003e bar, often called a Losmandy D-plate. It is significantly wider and more rigid than the narrower \u003cstrong\u003eVixen-style (or \"V-style\")\u003c\/strong\u003e bar. You must ensure your mount's saddle is compatible with the CGE standard to use this plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of using this CGE bar for my 8-inch SCT for astrophotography?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary benefit is \u003cstrong\u003estability\u003c\/strong\u003e. An 8-inch SCT with a camera, guide scope, and other accessories is a heavy payload. The wide CGE bar provides a much more rigid, flex-free connection to the mount compared to a V-style bar, which is crucial for maintaining pointing accuracy and achieving sharp stars during long exposures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron 8-inch CGE Dovetail Bar include mounting screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMounting hardware is not specified as an included item. Typically, you would reuse the screws already present on your telescope's optical tube that attach it to its original mount or rail.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this bar to mount my 8-inch Celestron OTA on a non-Celestron mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, provided the third-party mount has a saddle designed for the wide, Losmandy D-style dovetail plate. This is a common standard on many medium-to-heavy-duty equatorial mounts from various manufacturers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_8-inch_CGE_Dovetail_Bar_Diagram.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron 8-inch CGE Dovetail Bar Diagram\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184826653,"sku":"CEL-94216","price":67.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-8-inch-Dovetail-bar-CGE-94216-1__30628.1594230530.1280.1280.jpg?v=1684338373"},{"product_id":"celestron-9-25-inch-dovetail-bar-cge","title":"Celestron 9.25-inch Dovetail bar - CGE","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAttaches 9.25\" Schmidt-Cassegrain and EdgeHD OTAs\u003c\/li\u003e\n\u003cli\u003eCompatible with CGE and Losmandy D-style mount saddles\u003c\/li\u003e\n\u003cli\u003ePre-drilled for Celestron 9.25\" OTA mounting holes\u003c\/li\u003e\n\u003cli\u003eProvides a rigid, flex-free connection for imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron 9.25-inch Dovetail Bar (CGE)\u003c\/h2\u003e\n\u003cp\u003eThe Celestron 9.25-inch Dovetail Bar provides a robust, secure connection between your 9.25-inch Schmidt-Cassegrain or EdgeHD optical tube and any CGE or Losmandy D-style equatorial mount. This essential hardware is the foundation of a stable imaging or visual setup, backed by a Celestron 2-Year Warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCGE Mounting Standard for 9.25\" Optical Tubes\u003c\/h3\u003e\n\u003cp\u003eThis dovetail bar is specifically designed for the mounting hole pattern on Celestron 9.25\" optical tubes, ensuring a perfect fit without any modification. The CGE-style (or \"D-style\") plate is the larger of the two common standards, offering a wider, more stable platform that prevents flexure and vibration, which is critical for long-exposure astrophotography.\u003c\/p\u003e\n\u003cp\u003eBy distributing the weight of the OTA along its full length, the 9.25-inch bar ensures the telescope is securely held in the mount's saddle. This rigidity is key to maintaining precise tracking accuracy and achieving sharp, pinpoint stars in your images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e2-Year Factory Warranty\u003c\/h3\u003e\n\u003cp\u003eLike all Celestron accessories, the 9.25-inch CGE Dovetail Bar is a well-built component designed for longevity. Celestron covers this hardware with a 2-year factory warranty, protecting against any defects in materials or workmanship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Celestron 9.25-inch CGE dovetail bar used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis dovetail bar is used to attach a Celestron 9.25-inch optical tube assembly (OTA), such as a Schmidt-Cassegrain or EdgeHD, to an equatorial mount that uses the CGE or Losmandy D-style saddle plate. It is the physical interface that locks the telescope onto the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if I need a CGE or Vixen-style dovetail for my 9.25-inch OTA?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe choice depends entirely on your mount's saddle. Larger mounts, like the Celestron CGEM, CGX, or CGE Pro, use the wider CGE (D-style) saddle for increased stability. Smaller mounts, like the Advanced VX, use the narrower Vixen (V-style) saddle. Check your mount's specifications to see which dovetail style it accepts; many modern mounts feature dual saddles that accept both.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Celestron 9.25-inch CGE dovetail bar compatible with non-Celestron mounts?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The CGE dovetail format is an industry standard, often referred to as \"D-style.\" This bar is compatible with any mount from any manufacturer that uses the Losmandy D-style saddle, including brands like Software Bisque, Astro-Physics, and others.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I install the 9.25-inch CGE dovetail bar on my Schmidt-Cassegrain?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward. You will unthread the existing mounting screws from the front and rear cells of your 9.25\" optical tube. Align the pre-drilled holes on the dovetail bar with the threaded holes on the OTA, and then securely fasten the bar using the original screws. Ensure the screws are tight to prevent any wobble.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 9.25-inch dovetail bar fit an 8-inch or 11-inch Celestron OTA?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This bar is specifically drilled for the mounting hole spacing of a Celestron 9.25-inch optical tube. Celestron produces different CGE dovetail bars for their 8-inch and 11-inch models to match their unique mounting hole patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs hardware included with the Celestron 9.25-inch dovetail bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTypically, you will use the mounting screws that are already present on your Celestron optical tube. The dovetail bar itself is the primary component in the box and does not usually ship with additional screws.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e9.25 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eCelestron 9.25\" SCT\/EdgeHD OTAs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Style\u003c\/td\u003e\n\u003ctd\u003eCGE \/ Losmandy D-style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e9.25-inch Dovetail Bar (CGE)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_9.25-inch_Dovetail_bar_(CGE)_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload 9.25-inch CGE Dovetail Bar Diagram\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184892189,"sku":"CEL-94217","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-9-25-inch-Dovetail-bar-CGE-94217-1__88118.1594230531.1280.1280.jpg?v=1684338374"},{"product_id":"celestron-cge-universal-mounting-plate","title":"Celestron CGE Universal Mounting Plate","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDirectly fits Celestron CGE, CGE Pro, CGEM, and CGEM-DX mounts\u003c\/li\u003e\n\u003cli\u003ePre-drilled with 1\/4”-20, 5\/16”-18, and 3\/8”-16 threaded holes\u003c\/li\u003e\n\u003cli\u003eAccepts standard telescope mounting rings, cameras, and spotting scopes\u003c\/li\u003e\n\u003cli\u003eEliminates the need for custom drilling for accessory mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron CGE Universal Mounting Plate\u003c\/h2\u003e\n\u003cp\u003eThe Celestron CGE Universal Mounting Plate provides a secure, versatile foundation for attaching optical systems to Celestron CGE, CGE Pro, CGEM, or CGEM-DX mounts. This plate is pre-drilled with the most common photographic and astronomical thread patterns, including 1\/4”-20, 5\/16”-18, and 3\/8”-16 holes, allowing you to directly mount a wide array of accessories without modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Drilled Foundation for CGE and CGEM Mounts\u003c\/h3\u003e\n\u003cp\u003eThis mounting plate is engineered as a simple, robust interface between your mount and your optical equipment. Instead of relying on a dovetail system, it bolts directly to the mount's saddle platform, creating a rigid, flexure-free connection ideal for stable imaging or observing platforms. It is the factory-standard solution for anyone looking to attach non-dovetail equipment like camera-and-lens combinations or custom instrument packages.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Any Accessory with 1\/4”-20, 5\/16”-18, and 3\/8”-16 Holes\u003c\/h3\u003e\n\u003cp\u003eThe key to this plate's utility is its array of pre-drilled and tapped holes. The pattern accommodates the hardware found on most telescope tube rings, tripod heads, and photographic adapters, saving you the time and risk of drilling a blank plate yourself.\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4”-20 Holes:\u003c\/strong\u003e The standard for virtually all DSLR and mirrorless cameras, ball heads, and smaller spotting scopes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8”-16 and 5\/16”-18 Holes:\u003c\/strong\u003e Provides heavy-duty connection points for larger telescope mounting rings and other substantial accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich specific mounts is the CGE Universal Mounting Plate compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis plate is designed for a direct fit onto the saddle of Celestron CGE, CGE Pro, CGEM, and CGEM-DX series equatorial mounts. It is not a standard dovetail bar and will not fit Vixen or Losmandy-style saddle clamps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I attach my DSLR camera directly to the CGE Mounting Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The plate features standard 1\/4”-20 threaded holes, which is the same thread size used on the base of most DSLR and mirrorless cameras. For better pointing control, it is recommended to mount the camera on a ball head, which can then be attached to the plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat screw sizes does the CGE Universal Mounting Plate accept?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe plate is pre-drilled and tapped for three of the most common imperial thread sizes used in astronomy and photography:\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4”-20\u003c\/li\u003e\n\u003cli\u003e5\/16”-18\u003c\/li\u003e\n\u003cli\u003e3\/8”-16\u003c\/li\u003e\n\u003c\/ul\u003e\nThis allows you to attach a wide variety of accessories using standard, readily available bolts.\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need to buy mounting rings to use this CGE plate with my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, in most cases. This plate provides the flat, drilled surface to which you will attach a set of telescope mounting rings. The rings then clamp around your optical tube. The plate itself does not clamp directly to the telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow is this CGE plate different from a Losmandy-style dovetail bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA Losmandy dovetail bar is designed to slide into a saddle clamp for quick attachment and removal. This CGE Universal Mounting Plate bolts directly onto the mount's saddle platform, providing a more permanent, semi-fixed connection that is very rigid but does not offer quick-release convenience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this plate to piggyback a camera on my main telescope with a CGEM II mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis plate is designed to be the primary mounting platform, replacing a dovetail bar. To piggyback a camera, you would typically attach a smaller dovetail bar or accessory plate to the top of your main telescope's tube rings, not use this plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003eCelestron CGE, CGE Pro, CGEM, CGEM-DX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Holes\u003c\/td\u003e\n\u003ctd\u003ePre-drilled and tapped for 1\/4”-20, 5\/16”-18, and 3\/8”-16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Celestron CGE Universal Mounting Plate\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/94213-A-c1.jpg?v=1680650630\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCGE Universal Mounting Plate\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_94213_Mounting_Plate_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184924957,"sku":"CEL-94214","price":117.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-CGE-Universal-Mounting-Plate-94214-1__94591.1594230531.1280.1280.jpg?v=1684338376"},{"product_id":"celestron-dovetail-accessory-bar-rasa-8","title":"Celestron Dovetail Accessory Bar, RASA 8","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds a top-side accessory rail to the Rowe-Ackermann Schmidt Astrograph 8\"\u003c\/li\u003e\n\u003cli\u003eAccepts accessories designed for CGE or Losmandy-D style dovetail plates\u003c\/li\u003e\n\u003cli\u003eSolid aluminum construction provides a rigid, stable mounting platform\u003c\/li\u003e\n\u003cli\u003eInstalls directly into the RASA 8\" optical tube's existing threaded holes\u003c\/li\u003e\n\u003cli\u003eIdentical profile to the RASA 8\" factory-installed lower dovetail bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron Dovetail Accessory Bar, RASA 8\u003c\/h2\u003e\n\u003cp\u003eThe Celestron Dovetail Accessory Bar adds a second CGE\/Losmandy-D style mounting rail to the top of your Rowe-Ackermann Schmidt Astrograph 8\" optical tube. This bar is an identical match to the one on the bottom of the RASA 8\", creating a secure, integrated platform for mounting guide scopes, electronic focusers, and other imaging accessories. Constructed from solid aluminum, it installs easily into the existing threaded holes on the optical tube, with all required mounting hardware included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eTop-Side Accessory Mounting for the RASA 8\u003c\/h3\u003e\n\u003cp\u003eThe RASA 8\" is a dedicated imaging instrument that often requires multiple accessories running simultaneously. This top-side dovetail bar provides the necessary real estate to mount a guide scope for precise tracking or to attach control boxes and other hardware, keeping your setup clean and organized. By placing accessories directly opposite the main mounting rail, you can also improve the overall balance of your imaging rig on the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCGE\/Losmandy-D Standard Aluminum Construction\u003c\/h3\u003e\n\u003cp\u003eBuilt from sturdy aluminum, this accessory bar is engineered to provide a rigid, flex-free platform for your equipment. It matches the CGE\/Losmandy-D wide-format standard, ensuring broad compatibility with a vast range of astronomical accessories from Celestron and other manufacturers. Because it is identical to the dovetail on the bottom of the RASA 8\", it maintains the telescope's original design aesthetic and ensures a perfect fit without any modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat accessories can I mount on the Celestron Dovetail Bar for the RASA 8?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bar is compatible with the \u003cstrong\u003eCGE or Losmandy-D \"wide\" dovetail standard\u003c\/strong\u003e. You can mount any accessory that uses a corresponding saddle clamp, such as guide scope rings, piggyback camera adapters, or mounting plates for focus controllers and USB hubs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Celestron RASA 8 Dovetail Accessory Bar install on the telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward. The bar is designed to mount directly to the \u003cstrong\u003eexisting factory-drilled threaded holes\u003c\/strong\u003e on the top of the RASA 8\" optical tube. All necessary mounting hardware is included for a secure attachment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the same dovetail bar that comes on the bottom of the RASA 8?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is the \u003cstrong\u003esame dovetail bar\u003c\/strong\u003e as the one that comes standard on the bottom of the RASA 8\" optical tube. This ensures a perfect match in fit, finish, and compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this bar to mount a guide scope on my RASA 8?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. Mounting a guide scope is the primary reason for adding this accessory bar. It provides a stable, secure platform for a secondary scope, allowing you to achieve the long, precisely guided exposures that the RASA 8\" is designed for.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I mount a heavy accessory on the RASA 8 using this bar, will it be stable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The bar is made from \u003cstrong\u003esolid aluminum\u003c\/strong\u003e and bolts directly into the telescope's main body, creating a very rigid and sturdy platform. It is designed to securely hold common imaging accessories like guide scopes and control units without introducing flexure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Celestron RASA 8 Accessory Bar made of?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe dovetail bar is constructed from \u003cstrong\u003ealuminum\u003c\/strong\u003e, providing a strong yet lightweight platform that matches the build quality of the RASA 8\" telescope itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_RASA_8_Dovetail_Bar_Instruction_Sheet.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron RASA 8 Dovetail Bar Instruction Sheet\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184990493,"sku":"CEL-94290","price":97.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-Dovetail-Accessory-Bar-Rowe-Ackermann-Schmidt-Astrograph-RASA-8-94290-1__13346.1594230532.1280.1280.jpg?v=1684338379"},{"product_id":"celestron-universal-mounting-plate-cg-5","title":"Celestron Universal Mounting Plate - CG-5","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdapts accessories to Celestron CG-5 and Advanced VX mounts\u003c\/li\u003e\n\u003cli\u003eAccepts standard telescope mounting rings\u003c\/li\u003e\n\u003cli\u003eProvides a platform for cameras and spotting scopes\u003c\/li\u003e\n\u003cli\u003ePre-drilled for 1\/4”-20, 5\/16”-18, and 3\/8”-16 hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron Universal Mounting Plate - CG-5\u003c\/h2\u003e\n\u003cp\u003eThe Celestron Universal Mounting Plate for CG-5 and Advanced VX mounts allows you to attach a wide range of accessories using its multiple pre-drilled holes for 1\/4”-20, 5\/16”-18, and 3\/8”-16 hardware. This basic but essential plate serves as the critical interface between your optical tube assembly or camera and the mount's saddle, creating a stable, secure connection for imaging or visual observation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe CG-5 Standard: Connecting Gear with 1\/4\"-20 Hardware\u003c\/h3\u003e\n\u003cp\u003eThis plate is built to the CG-5 dovetail bar specification, ensuring a perfect fit with Celestron's popular Advanced Series CG-5 and Advanced VX equatorial mounts. It acts as a universal adapter, transforming the mount's saddle into a versatile platform ready to accept a variety of instruments. By using this single plate, you can standardize how you attach different setups, from a primary telescope in rings to a secondary piggybacked camera system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDrilled for 1\/4\"-20, 5\/16\"-18, and 3\/8\"-16 Hardware\u003c\/h3\u003e\n\u003cp\u003eThe plate's utility comes from its array of pre-drilled and threaded holes, which accommodate the most common imperial hardware sizes used in astronomy. The 1\/4\"-20 threads are the standard for most DSLR cameras and small spotting scopes, allowing for direct attachment without rings. The larger 5\/16”-18 and 3\/8”-16 holes provide robust connection points for heavier-duty telescope mounting rings, ensuring your primary optics are held rigidly without flexure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4”-20 Holes:\u003c\/strong\u003e The universal standard for photographic tripods, allowing you to mount a DSLR or spotting scope directly to your equatorial mount for tracked imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger Thread Options:\u003c\/strong\u003e Accommodates the larger bolts often used by heavy-duty mounting rings for larger optical tubes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Position Trade-off:\u003c\/strong\u003e As a plate with pre-drilled holes rather than slots, it provides a very rigid connection. However, you must ensure your mounting rings have a hole spacing that matches one of the patterns on the plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat mounts is the Celestron CG-5 Universal Mounting Plate compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis plate is designed specifically for mounts that use the Vixen-style (V-Block) saddle plate, most notably the \u003cstrong\u003eCelestron Advanced CG-5\u003c\/strong\u003e and \u003cstrong\u003eAdvanced VX\u003c\/strong\u003e series mounts. It will also fit other brands of mounts that use this common dovetail standard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I attach my DSLR camera directly to this CG-5 plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The plate includes standard \u003cstrong\u003e1\/4\"-20 threaded holes\u003c\/strong\u003e, which is the same thread size found on the bottom of virtually all DSLR and mirrorless cameras. You can bolt your camera directly to the plate for wide-field astrophotography with camera lenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of mounting rings can I use with this plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou can use any brand of telescope mounting rings that attach via 1\/4\"-20, 5\/16\"-18, or 3\/8\"-16 bolts. The key is to ensure the spacing between the holes on your rings matches one of the available patterns on the mounting plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron CG-5 plate come with mounting screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, mounting hardware is not included. You will need to provide the appropriate bolts to connect your specific telescope rings or camera to the plate. The hardware required is determined by your accessories, not the plate itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I attach this plate to my telescope tube to mount it on my Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis plate does not attach directly to a bare telescope tube. You must first have a set of mounting rings that are correctly sized for your telescope's outer diameter. You then bolt the mounting rings to this plate, and finally, you slide the plate into the saddle of your Advanced VX mount and tighten the saddle knobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this plate to piggyback a guide scope on top of my 8\" SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is a common application. If your 8\" SCT is mounted to your mount with its own Vixen-style dovetail bar, you can attach this second plate to the top of the SCT (using a top rail or radius blocks). This provides a flat, secure platform to mount your guide scope rings and guide scope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Universal_Mounting_Plate_CG-5_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron Universal Mounting Plate CG-5 Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967188889885,"sku":"CEL-94213","price":79.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-Universal-Mounting-Plate-CG-5-94213-1__85051.1594230532.1280.1280.jpg?v=1684338280"},{"product_id":"explore-scientific-camera-dovetail-plate","title":"Explore Scientific Camera Dovetail Plate","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdapts cameras to any standard Vixen-style saddle\u003c\/li\u003e\n\u003cli\u003eMultiple slotted mounting points for precise balancing\u003c\/li\u003e\n\u003cli\u003eIncludes a standard camera mounting bolt\u003c\/li\u003e\n\u003cli\u003eComes with an adapter for European-standard threads\u003c\/li\u003e\n\u003cli\u003eFeatures a spring-loaded pin to prevent camera rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific Camera Dovetail Plate\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific Camera Dovetail Plate provides a simple, secure solution for attaching your DSLR or mirrorless camera directly to any astronomical mount equipped with a standard Vixen-style saddle. This plate allows you to use your existing camera lenses for stunning wide-field astrophotography, featuring multiple adjustment slots to achieve perfect balance with any lens.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Vixen-Style Mounting for Your Camera Gear\u003c\/h3\u003e\n\u003cp\u003eThis dovetail plate bridges the gap between the photographic world and the astronomical one. Instead of mounting a full telescope, you can attach your camera body or a telephoto lens directly to your equatorial mount, turning it into a stable, tracking platform for capturing everything from the Milky Way core to the Andromeda Galaxy (M31).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAdjustable Security for Stable Astrophotography\u003c\/h3\u003e\n\u003cp\u003eAchieving a stable image requires a secure, balanced connection. This plate features several design elements to ensure your camera stays put and your tracking remains smooth throughout the night. The multiple slots allow you to slide your camera setup forward or backward to precisely find its center of gravity, which is critical for accurate tracking.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Threading:\u003c\/strong\u003e The plate comes with a standard camera bolt and includes an adapter for larger, European-standard threads, ensuring compatibility with a wide range of camera bodies, lenses, and tripod heads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Rotation Pin:\u003c\/strong\u003e A retractable, spring-loaded pin provides an extra point of contact with the base of your camera or lens foot, preventing any twisting or rotation during long exposures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of mounts is the Explore Scientific Camera Dovetail Plate compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis plate is designed with a \u003cstrong\u003eVixen-style\u003c\/strong\u003e profile, which is one of the most common saddle standards in amateur astronomy. It is compatible with a wide range of mounts from brands like Explore Scientific, Celestron, Sky-Watcher, and iOptron that use a Vixen \"V-style\" saddle plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I balance my DSLR and lens using the Explore Scientific Camera Dovetail Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe plate features \u003cstrong\u003emultiple slots\u003c\/strong\u003e running along its length. By loosening the camera mounting bolt, you can slide your entire camera and lens assembly forward or backward within the slot before tightening it down. This allows you to find the precise balance point over your mount's declination axis, ensuring smooth tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the spring-loaded pin on the Explore Scientific Camera Dovetail Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe spring-loaded pin acts as an \u003cstrong\u003eanti-rotation\u003c\/strong\u003e device. Many telephoto lens feet and some camera bodies have a corresponding small hole near the main mounting thread. When engaged, this pin prevents the camera from twisting on the plate, which can happen with heavy lenses, especially when the mount is slewing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Explore Scientific plate support cameras with larger, European-style mounting threads?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. While it comes with a standard camera bolt installed, it also includes a thread adapter. This adapter converts the bolt to the larger size commonly found on some European photographic equipment and larger video cameras, ensuring broad compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow would I use the Explore Scientific Camera Dovetail Plate to image the North American Nebula (NGC 7000) with a 200mm lens?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou would attach your 200mm lens foot to the plate using the main bolt, sliding it to find the best balance point. Then, slide the entire plate into your equatorial mount's Vixen saddle and lock it down. Once polar aligned, you can point to the North American Nebula (NGC 7000) in Cygnus and begin taking long, tracked exposures without a telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this plate suitable for attaching my full-frame mirrorless camera to a Sky-Watcher Star Adventurer Pro?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The Sky-Watcher Star Adventurer Pro uses a standard Vixen-style saddle. This plate is an ideal accessory for that setup, providing a much more secure and adjustable mounting platform for your mirrorless camera than a standard ball head, especially when using heavier lenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e8118030325900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCamera Dovetail Plate\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967210615069,"sku":"ES-DSLRCDA","price":111.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-Camera-Dovetail-Plate-DSLRCDA-1__18845.1594240415.1280.1280.jpg?v=1684338990"},{"product_id":"explore-scientific-medium-vixen-style-saddle-plate","title":"Explore Scientific Medium-Vixen Style Saddle Plate","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eVixen-Style Mounting Profile\u003c\/li\u003e\n\u003cli\u003eSolid Extruded Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish for Durability\u003c\/li\u003e\n\u003cli\u003eMedium Length for Versatile Balancing\u003c\/li\u003e\n\u003cli\u003eLightweight Yet Rigid Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific Medium-Vixen Style Saddle Plate\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific Medium-Vixen Style Saddle Plate provides the critical, load-bearing interface between your optical tube assembly and any mount equipped with a Vixen-style saddle. Machined from a solid piece of extruded aluminum, it creates a rigid, flexure-free connection essential for stable tracking and sharp imaging. Its black anodized finish ensures durability against wear from repeated use in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe Critical Link: A Secure Vixen-Style Connection\u003c\/h3\u003e\n\u003cp\u003eThis saddle plate adheres to the industry-standard Vixen-style dovetail profile, ensuring compatibility with a wide range of popular mounts from numerous manufacturers. It is the single point of contact responsible for securing your telescope, making its rigidity paramount for both safety and pointing accuracy. A secure connection prevents slippage and flexure that can ruin an exposure or cause frustrating tracking errors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBuilt for Rigidity: Solid Extruded Aluminum Construction\u003c\/h3\u003e\n\u003cp\u003eMachined from a single piece of extruded aluminum, the plate is engineered to be both lightweight and exceptionally rigid. This solid construction prevents the plate from bending or twisting under the load of an optical tube, a common point of failure in lesser designs. The black anodized finish provides a hard, corrosion-resistant surface that stands up to years of demanding use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eChoosing Your Standard: Vixen-Style vs. Losmandy-Style Plates\u003c\/h3\u003e\n\u003cp\u003eWhile the Vixen standard is ideal for lighter to medium-weight telescope setups, it is important to understand its place relative to the larger Losmandy D-style standard.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLosmandy D-Style Advantage:\u003c\/strong\u003e The wider profile of a Losmandy plate offers a larger contact area and greater rigidity, making it the preferred choice for heavy optical tubes and serious imaging rigs where zero flexure is the goal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVixen-Style Advantage:\u003c\/strong\u003e The Vixen plate is lighter, more compact, and compatible with the majority of grab-and-go mounts and portable setups. For visual use and imaging with smaller refractors or SCTs, the Vixen standard provides more than enough stability in a more manageable package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat mounts are compatible with the Explore Scientific Vixen-Style Saddle Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis plate is compatible with any mount that has a Vixen-style (or \"V-style\") saddle. This includes most mounts from Explore Scientific, Celestron (AVX, CG-5), Sky-Watcher, Orion, and many others designed for small to medium payloads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Vixen-style plate strong enough for an 8\" SCT like the Celestron EdgeHD 800?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, for visual use and light imaging, this medium Vixen-style plate is sufficient for an 8\" SCT. However, for long-exposure deep-sky imaging with heavy accessories like an off-axis guider and filter wheel, upgrading to a wider Losmandy-style plate and corresponding saddle is recommended to eliminate any potential for flexure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I attach the Explore Scientific saddle plate to my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe plate attaches to the bottom of your telescope's tube rings or directly to the tube if it has threaded mounting holes. You will need to provide your own mounting screws of the appropriate length and thread (typically 1\/4\"-20) to match your telescope's hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy choose this aluminum saddle plate over a steel one?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAn aluminum plate like this one offers an excellent balance of rigidity and low weight. While a steel plate might be slightly more rigid, it would be significantly heavier, adding unnecessary weight to your mount and making the setup harder to transport and balance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm trying to balance my 102mm refractor. Will this medium plate help?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, a medium-length plate provides more surface area to slide back and forth in the mount's saddle, giving you greater flexibility for achieving perfect balance. This is especially useful when you change accessories, like switching from a lightweight eyepiece to a heavier camera, which shifts the center of gravity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main difference between a Vixen-style and a Losmandy-style saddle plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary difference is width and load capacity. \u003cstrong\u003eVixen-style plates\u003c\/strong\u003e are narrower and are the standard for lighter telescopes and portable mounts. \u003cstrong\u003eLosmandy-style plates\u003c\/strong\u003e (or \"D-style\") are wider and more robust, designed to support heavier optical tubes and prevent flexure in demanding astrophotography setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e812257016648\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eExplore Scientific Medium-Vixen Style Saddle Plate\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967210778909,"sku":"ES-VXNMD","price":83.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-Medium-Vixen-Style-Saddle-Plate-VXNMD-1__56371.1594240416.1280.1280.jpg?v=1684338993"},{"product_id":"explore-scientific-t-shaped-finder-scope-base-for-essential-series-with-mounting-screws","title":"Explore Scientific T-Shaped Finder Scope Base for Essential Series with Mounting Screws","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eT-Shaped Finder Scope Base\u003c\/li\u003e\n\u003cli\u003eDesigned for Explore Scientific Essential Series Telescopes\u003c\/li\u003e\n\u003cli\u003eCompatible with all Explore Scientific Finder Scopes\u003c\/li\u003e\n\u003cli\u003eCreates a Sturdy, Secure Mounting Point\u003c\/li\u003e\n\u003cli\u003eIncludes Mounting Screws for Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific T-Shaped Finder Scope Base for Essential Series with Mounting Screws\u003c\/h2\u003e\n\u003cp\u003eWith the Explore Scientific T-Shaped Finder Scope Base, you can add a dedicated, secure mounting point for an Explore Scientific finder scope to your Essential Series telescope. This base is engineered specifically for the Essential Series optical tubes, ensuring a perfect fit and stable alignment for accurate pointing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Dedicated Mounting Point for Explore Scientific Finders\u003c\/h3\u003e\n\u003cp\u003eThis T-shaped base provides the correct mounting interface required to attach any Explore Scientific finder scope to an Essential Series telescope. It creates a rigid, stable platform, ensuring your finder maintains its alignment with the main optics night after night for reliable object locating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSturdy, Easy-to-Install Base for Essential Series Telescopes\u003c\/h3\u003e\n\u003cp\u003eEngineered for a precise fit on Essential Series optical tubes, this base is both sturdy and simple to attach. The included mounting screws allow for a direct, secure installation into the pre-drilled mounting holes on the telescope, getting your finder scope mounted and ready for alignment in minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the Explore Scientific T-Shaped Finder Scope Base?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis base creates a secure, stable mounting point on an Explore Scientific Essential Series telescope, allowing you to attach any Explore Scientific finder scope for easy object locating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this T-Shaped Finder Scope Base compatible with my Explore Scientific AR102 telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The AR102 is part of the Essential Series, and this base is specifically designed to provide a perfect fit for all telescopes in that product line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this base to mount a finder scope from another brand on my Essential Series telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis base is designed for the specific mounting foot found on Explore Scientific finder scopes. While some other brands might use a similar Vixen-style foot, compatibility is not guaranteed and a secure fit may not be possible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I install the Explore Scientific T-Shaped Finder Scope Base on my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward. The base attaches directly to the pre-drilled holes on your Essential Series telescope tube using the included mounting screws.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Explore Scientific T-Shaped Finder Scope Base come with the necessary screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the base includes the two mounting screws required to securely attach it to your Essential Series telescope tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this base fit a non-Essential Series telescope from Explore Scientific, like a Truss Tube Dobsonian?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this T-shaped base is engineered exclusively for the hole pattern and tube curvature of the Essential Series telescopes. Other models, like the Truss Tube Dobsonians, use different mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e812257014781\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967210877213,"sku":"ES-FNDRBASE-ESSEN","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-T-Shaped-Finder-Scope-Base-for-Essential-Series-with-Mounting-Screws-FNDRBASE-ESSEN-1__80349.1594240417.1280.1280.jpg?v=1684339000"},{"product_id":"explore-scientific-finder-scope-base-with-mounting-screws","title":"Explore Scientific Finder Scope Base with Mounting Screws","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eWeight: 1.4oz\u003c\/li\u003e\n\u003cli\u003eDimensions: 50mm L x 51mm W x 25mm H\u003c\/li\u003e\n\u003cli\u003eProvides a secure base for Explore Scientific finder scopes\u003c\/li\u003e\n\u003cli\u003eIncludes mounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eExplore Scientific Finder Scope Base with Mounting Screws\u003c\/h2\u003e\n      \u003cp\u003eThe Explore Scientific Finder Scope Base establishes a secure mounting point on a compact 50mm by 51mm footprint. Weighing only 1.4oz and standing just 25mm tall, this base adds minimal weight and profile to your optical tube assembly, ensuring your telescope's balance remains unaffected.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eCompact and Lightweight Design: 1.4oz for Easy Balancing\u003c\/h3\u003e\n      \u003cp\u003eAt just 1.4oz, this finder base is engineered to be unobtrusive. Its low mass prevents the balance issues that can arise when adding accessories to an optical tube, which is especially critical for smaller telescopes on lighter mounts. The low 25mm height profile also helps avoid snags and keeps the finder scope close to the main tube.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eSecure Mounting: A 50mm x 51mm Platform for Explore Scientific Finders\u003c\/h3\u003e\n      \u003cp\u003eThis base creates a sturdy, reliable connection between your telescope and any Explore Scientific finder scope. The 50mm x 51mm platform provides a stable footing, and the included mounting screws ensure a straightforward, secure installation. It is specifically designed to match the mounting bracket of Explore Scientific's high-quality finders.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the Explore Scientific Finder Scope Base?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis base is designed to be attached to your telescope's optical tube, providing the correct mounting point to securely attach an Explore Scientific finder scope or reflex sight. It acts as the interface between the telescope and the finder's mounting bracket.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the dimensions of the Explore Scientific Finder Scope Base?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe base has a footprint of \u003cstrong\u003e50mm in length by 51mm in width\u003c\/strong\u003e and stands \u003cstrong\u003e25mm tall\u003c\/strong\u003e. It weighs a mere \u003cstrong\u003e1.4oz\u003c\/strong\u003e, adding negligible weight to your setup.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this base compatible with finder scopes from other brands?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis base is specifically designed for the mounting brackets used on \u003cstrong\u003eExplore Scientific finder scopes\u003c\/strong\u003e. While it may fit some other finders that use a similar Vixen-style foot, compatibility is not guaranteed. It is always best to use the base designed for your specific finder scope brand to ensure a secure fit.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eI have an Explore Scientific ED80 refractor. Will this base fit the pre-drilled holes?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eMany Explore Scientific telescopes come with pre-drilled holes for a finder scope base. You should measure the hole spacing on your specific ED80 and compare it to the slot spacing on this base to confirm a direct fit. The base's design allows for some flexibility in screw placement.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eI want to add a guidescope to my 10\" Dobsonian. Is the 1.4oz weight of the Explore Scientific base significant enough to affect balance?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, the 1.4oz weight of the base itself is negligible and will not affect the balance of a 10\" Dobsonian. The weight of your guidescope and camera will be the primary factors you need to account for when balancing the telescope, likely requiring a counterweight on the front of the tube.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Explore Scientific Finder Scope Base come with the necessary screws for installation?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, the base includes the mounting screws required to attach it to your telescope tube. This allows for an easy, out-of-the-box installation.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.4oz\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e51mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967210909981,"sku":"ES-FNDRBASEBLK","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-Finder-Scope-Base-with-Mounting-Screws-FNDRBASEBLK-1__25405.1594240417.1280.1280.jpg?v=1684339003"},{"product_id":"explore-scientific-50mm-finder-scope-rings-standard-height","title":"Explore Scientific 50mm Finder Scope Rings - Standard Height","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDesigned for 50mm finder scopes\u003c\/li\u003e\n\u003cli\u003eStandard height profile at 93mm\u003c\/li\u003e\n\u003cli\u003eLightweight at only 3.9oz (110.6g)\u003c\/li\u003e\n\u003cli\u003eThree-point adjustment thumbscrews for precise alignment\u003c\/li\u003e\n\u003cli\u003eQuick-release dovetail base (finder base sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific 50mm Finder Scope Rings - Standard Height\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific 50mm Finder Scope Rings provide a secure and precisely adjustable mounting solution, positioning your finder 93mm above the base. Weighing just 3.9oz (110.6g), this standard-height bracket measures 73mm in length and 61mm in width, offering a stable platform without adding significant weight to your optical tube assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e93mm Standard Height Clearance for 50mm Finders\u003c\/h3\u003e\n\u003cp\u003eThese rings are engineered specifically for 50mm finder scopes, cradling the tube securely in a dual-ring design. The 93mm height provides ample clearance over the main telescope tube, which can be critical for comfortable viewing positions and avoiding interference with larger eyepieces or other accessories on the main optical path.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThree-Point Collimation with Glove-Friendly Thumbscrews\u003c\/h3\u003e\n\u003cp\u003eEach of the two rings features a three-point adjustment system for precise and stable alignment of your finder scope with your main telescope. The included heavy-duty plastic thumbscrews have large, easy-to-grip heads, allowing you to make fine adjustments without fumbling, even while wearing gloves on a cold night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eQuick-Release Dovetail Mount in a 3.9oz Package\u003c\/h3\u003e\n\u003cp\u003eDesigned for convenience, the entire 3.9oz bracket attaches to your telescope via a dovetail that fits into a standard finder base (sold separately). This quick-release mechanism allows you to remove and reinstall your finder scope in seconds without losing alignment, making it much easier to pack and transport your telescope in its case.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eChoosing Your Height: Standard vs. Low and High Profile Rings\u003c\/h3\u003e\n\u003cp\u003eExplore Scientific offers finder rings in multiple heights to suit different setups. This 93mm Standard Height model is a versatile option, balancing clearance and a compact profile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Profile Rings:\u003c\/strong\u003e Offer the most compact and rigid setup, ideal for smaller telescopes or when clearance is not a concern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Height Rings (This Model):\u003c\/strong\u003e Provides a good compromise, raising the finder for easier access without creating a large lever arm on the telescope tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Profile Rings:\u003c\/strong\u003e Best for situations where maximum clearance is needed, such as on large-aperture Newtonians or when using bulky equipment around the focuser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Explore Scientific 50mm rings fit a finder scope from another brand?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, these rings are designed to hold any finder scope with an optical tube diameter of approximately 50mm. The three-point adjustment screws provide some tolerance for minor variations in tube size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of base do I need for these Explore Scientific finder rings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThese rings use a standard dovetail foot and require a compatible finder scope base, which is \u003cstrong\u003esold separately\u003c\/strong\u003e. Most telescopes from major brands come with a pre-installed base that will accept this type of dovetail bracket.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the 93mm height help when using my 10\" Dobsonian?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOn a larger telescope like a 10\" Dobsonian, the 93mm height of these Standard rings raises the finder scope away from the main tube. This makes it easier and more comfortable to look through the finder without having to crane your neck at an awkward angle, especially when the telescope is pointed high in the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the three-point adjustment on the Explore Scientific 50mm rings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA three-point adjustment system allows for very precise and stable alignment (collimation) between your finder scope and main telescope. By adjusting the three opposing screws, you can aim the finder with high accuracy and ensure it remains locked on target, unlike simpler spring-loaded designs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I leave these rings on my Schmidt-Cassegrain telescope when I put it in its case?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eProbably not. Most form-fitting telescope cases require the finder scope to be removed. The quick-release dovetail on the Explore Scientific rings is specifically designed for this, allowing you to detach the entire finder and bracket assembly easily for storage and reattach it quickly at your next session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the adjustment screws on the Explore Scientific 50mm rings made of?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe adjustment screws are made from a heavy-duty plastic with large, textured heads. This material prevents marring the finish on your finder scope's tube and makes them easy to turn with bare hands or gloves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003e50mm Finder Scopes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.9oz; 110.6g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e73mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e61mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e93mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eExplore Scientific 50mm Finder Scope Rings - Standard Height\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class.dav-grid\u003e\n\u003cp\u003eNo product-specific manual is available for this accessory.\u003c\/p\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967210942749,"sku":"ES-FNDRRGSSTD","price":83.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-50mm-Finder-Scope-Rings-Standard-Height-FNDRRGSSTD-1__87940.1594240417.1280.1280.jpg?v=1684339005"},{"product_id":"explore-scientific-50mm-finder-scope-rings-for-right-angle-finder","title":"Explore Scientific 50mm Finder Scope Rings for Right Angle Finder","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDesigned for 50mm Aperture Finder Scopes\u003c\/li\u003e\n\u003cli\u003eDual-Ring Bracket with 6 Collimation Points\u003c\/li\u003e\n\u003cli\u003eQuick-Release Dovetail Foot (Base Sold Separately)\u003c\/li\u003e\n\u003cli\u003eLarge, Glove-Friendly Adjustment Thumbscrews\u003c\/li\u003e\n\u003cli\u003eSecurely Holds Heavier Right-Angle Finders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific 50mm Finder Scope Rings for Right Angle Finder\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific 50mm Finder Scope Rings provide a robust, two-ring mounting solution designed to hold 50mm right-angle finderscopes with exceptional stability. Each of the two rings features three adjustment points for precise, 6-point collimation, ensuring your finder is perfectly aligned with your main telescope's optical axis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 6-Point Collimation System for 50mm Finders\u003c\/h3\u003e\n\u003cp\u003eAchieving and holding precise alignment is critical for a finder scope. This bracket uses a dual-ring design, with each ring equipped with three heavy-duty plastic thumbscrews. This 6-point adjustment system allows you to gently but firmly center the finderscope and lock its position without marring its finish. The oversized thumbscrew heads are designed for easy manipulation, even while wearing gloves during cold-weather observing sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eFast Setup with a Quick-Release Dovetail Base\u003c\/h3\u003e\n\u003cp\u003eFor astronomers who need to break down their equipment for transport, convenience is key. The bracket features an integrated dovetail foot that slides into a standard finder base (sold separately) and locks down with thumbscrews. This quick-release mechanism allows you to attach or remove your entire finder scope and bracket assembly in seconds, streamlining your setup and teardown process without losing alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat size finder scopes do the Explore Scientific Rings fit?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThese Explore Scientific finder scope rings are designed specifically to hold finders with a \u003cstrong\u003e50mm\u003c\/strong\u003e tube diameter, which is a common size for larger, more capable finder scopes and guide scopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eAre these Explore Scientific rings compatible with finder bases from other brands?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe bracket uses a dovetail foot that is compatible with many standard finder scope bases, including those from Explore Scientific, Vixen, Synta (Celestron\/Sky-Watcher), and others. However, it's always recommended to check the specific dimensions of your existing base to ensure a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy are there three adjustment screws on each ring of the Explore Scientific 50mm rings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe three-screw system on each of the two rings creates a total of \u003cstrong\u003esix adjustment points\u003c\/strong\u003e. This allows for very precise and stable alignment (collimation) of your finder scope with your main telescope. You can make fine adjustments to center a target star in both the finder and the main eyepiece, ensuring accurate pointing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the finder base come with the Explore Scientific 50mm rings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the finder scope base that attaches to the telescope's optical tube is \u003cstrong\u003esold separately\u003c\/strong\u003e. This product includes only the two rings mounted on the quick-release dovetail bracket.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I align my Explore Scientific 50mm finder scope with my 8\" SCT using these rings to find the Andromeda Galaxy (M22)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFirst, point your 8\" SCT at a bright, distant terrestrial object during the day or a bright star like Vega at night. Center the object in a low-power eyepiece in your main scope. Then, without moving the telescope, use the six thumbscrews on the rings to move the finder's crosshairs until they are also centered on the exact same object. Once aligned, your finder will accurately point to celestial targets like the Andromeda Galaxy (M31).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill these Explore Scientific 50mm rings securely hold a heavier right-angle illuminated reticle finder on a Dobsonian telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The dual-ring design is specifically intended to provide a stable, flex-free platform for heavier accessories like 50mm right-angle finders, which often include prisms and illuminated reticles. The 6-point contact system ensures the finder remains securely collimated, even when mounted on a Dobsonian that is moved frequently across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e812257013913\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967211041053,"sku":"ES-FNDRRGSRA","price":111.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-50mm-Finder-Scope-Rings-for-Right-Angle-Finder-FNDRRGSRA-1__46072.1594240418.1280.1280.jpg?v=1684339007"},{"product_id":"explore-scientific-cradle-for-white-127mm","title":"Explore Scientific Cradle for White 127mm","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 5.2\" (131mm) for a precise fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDovetail Length:\u003c\/strong\u003e 8\" (203mm) for stable mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Explore Scientific White 127mm Telescopes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Vixen-Style Dovetail Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Mounting:\u003c\/strong\u003e Slotted handle with 1\/4\"-20 compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific Cradle for White 127mm\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific Cradle for White 127mm telescopes provides a secure mounting solution with an exact inside diameter of 5.2 inches (131mm) to protect your optical tube's finish. This assembly includes an 8-inch (203mm) long Vixen-style dovetail plate, ensuring a stable connection to a wide range of compatible mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eHinged Rings and Slotted Handle for 127mm OTAs\u003c\/h3\u003e\n\u003cp\u003eThe hinged ring system is designed for a precise 131mm fit, securely cradling your 127mm OTA without scuffing its surface. Oversized metal thumbscrews allow for tool-free opening and closing, making it easy to mount or remove your telescope even while wearing gloves in cold weather.\u003c\/p\u003e\n\u003cp\u003eAn integrated, slotted carry handle simplifies transport and offers a stable platform for accessories. You can attach a guidescope or camera directly to the handle using standard 1\/4-20 bolts for piggyback astrophotography or autoguiding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e8-inch Vixen-Style Dovetail for Mount Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe cradle assembly is built upon an 8-inch (203mm) long extruded aluminum dovetail plate. This Vixen-style bar provides a rigid, full-length connection between the two rings, preventing any flexure that could compromise your imaging or visual pointing accuracy.\u003c\/p\u003e\n\u003cp\u003eThis industry-standard Vixen-style design creates immediate compatibility with a wide range of popular mounts, including the Explore Scientific Twilight series. This allows for quick attachment and reliable performance for both visual observation and imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I install my 127mm telescope into the Explore Scientific Cradle?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eSimply loosen the two large metal thumbscrews to open the hinged rings. Place your 127mm optical tube inside, close the rings, and tighten the thumbscrews for a secure fit. The interior is designed to hold the tube snugly without causing damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount a guidescope on the Explore Scientific Cradle for my 127mm scope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The integrated carry handle is slotted and compatible with standard \u003cstrong\u003e1\/4-20 bolts\u003c\/strong\u003e, allowing you to directly attach accessories like a guidescope, finderscope, or a piggyback camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat type of mount is compatible with the Explore Scientific Cradle for White 127mm?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe cradle comes with an \u003cstrong\u003e8-inch Vixen-style dovetail plate\u003c\/strong\u003e. This makes it compatible with any mount that accepts a Vixen \"V-style\" dovetail, such as the Explore Scientific Twilight mounts and many others from various manufacturers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Explore Scientific Cradle fit other telescopes besides the white 127mm models?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIt is not recommended. The cradle has a precise inside diameter of \u003cstrong\u003e5.2 inches (131mm)\u003c\/strong\u003e and is specifically engineered to provide a snug, secure fit for Explore Scientific's 127mm OTAs with that exact outer diameter. Using it with a smaller or larger tube will result in an unstable or impossible fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does this cradle help when transporting my Explore Scientific 127mm refractor?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe cradle's integrated carry handle makes it much safer and easier to carry your 127mm telescope. You can move the fully assembled optical tube securely with one hand, then place it directly onto your Vixen-style mount without fumbling with the optical tube itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I'm imaging the Orion Nebula (M42) with my Explore Scientific 127mm, can I use this cradle to attach my guide camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The slotted handle on the cradle is the ideal place to mount a small guidescope and guide camera system. This keeps the guiding setup rigidly attached to the main optical tube, which is critical for long-exposure astrophotography of targets like the Orion Nebula (M42).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInside Diameter\u003c\/td\u003e\n\u003ctd\u003e5.2\" \/ 131mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Length\u003c\/td\u003e\n\u003ctd\u003e8\" \/ 203mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific USA One Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967211139357,"sku":"ES-TED127CRDL","price":125.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-Cradle-for-White-127mm-TED127CRDL-1__49085.1594240418.1280.1280.jpg?v=1684339171"},{"product_id":"explore-scientific-50mm-finder-scope-rings-tall","title":"Explore Scientific 50mm Finder Scope Rings - Tall","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDesigned for 50mm Finderscopes\u003c\/li\u003e\n\u003cli\u003eTall Profile for Comfortable Viewing Angles\u003c\/li\u003e\n\u003cli\u003eQuick-Release Dovetail Bracket\u003c\/li\u003e\n\u003cli\u003eMulti-Point Adjustment Rings\u003c\/li\u003e\n\u003cli\u003eLarge, Glove-Friendly Thumbscrews\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific 50mm Finder Scope Rings - Tall\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific 50mm Finder Scope Rings provide a tall, quick-release mounting solution for 50mm finderscopes, featuring a secure ring design with large adjustment thumbscrews to simplify alignment and improve viewing ergonomics, especially when aimed near the zenith.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eHigh-Profile Ergonomics for 50mm Finders\u003c\/h3\u003e\n\u003cp\u003eThis tall bracket raises your 50mm finderscope significantly higher than standard rings, placing it in a more accessible position. This elevated line of sight prevents you from needing to crouch in awkward positions, reducing neck and back strain during long observing sessions, particularly when your telescope is pointed at high altitudes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eQuick-Release Mounting \u0026amp; Precision Alignment\u003c\/h3\u003e\n\u003cp\u003eThe bracket features a dovetail that slides into a compatible finderscope base (sold separately) and locks down with thumbscrews. This quick-release system allows you to remove the entire finder assembly for transport, protecting its alignment. The rings themselves hold the finder securely, and each offers multiple points of adjustment via large, heavy-duty plastic thumbscrews that are easy to manipulate even while wearing gloves in cold weather.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the best way to align my finderscope with the Explore Scientific 50mm rings on my 8\" SCT for the first time?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInitial alignment is best done during the daytime. Point your SCT with a low-power eyepiece at a distant, stationary terrestrial object like a telephone pole. Center the object in the eyepiece, then adjust the finder's thumbscrews until the crosshairs are centered on the exact same point. Repeat the process with a high-power eyepiece for maximum accuracy. This daytime alignment will get you extremely close, requiring only minor tweaks on a bright star at night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm trying to find the Ring Nebula (M57) with my Dobsonian. How will these tall Explore Scientific 50mm rings help?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA Dobsonian mount often requires you to be at an awkward angle when looking through a low-mounted finder, especially for objects high in the sky like M57 in the summer. The tall profile of these rings elevates the finderscope, allowing you to aim your telescope comfortably while standing or sitting, making the process of star-hopping to your target faster and more enjoyable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy choose the tall version of the Explore Scientific 50mm finder rings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe tall version is ideal for larger telescopes or setups with piggybacked equipment. The extra height creates clearance and, more importantly, provides a much more comfortable viewing position that reduces physical strain, allowing you to focus on observing rather than contorting your body to see through the finder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo the Explore Scientific 50mm Finder Scope Rings come with a base to attach to my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the finderscope base is \u003cstrong\u003esold separately\u003c\/strong\u003e. These rings include the bracket with an integrated dovetail, which is designed to fit into a standard finderscope base mounted on your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill I need to realign my finder every time I use the Explore Scientific quick-release bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAfter the initial, precise alignment, you should only need to make very minor adjustments each time you re-attach the finder and bracket to your telescope. The quick-release mechanism is designed to hold alignment reasonably well between sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I adjust the Explore Scientific 50mm rings while wearing gloves?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The rings feature large, heavy-duty plastic thumbscrews that are specifically designed for easy adjustment, even when you are wearing gloves during cold-night observing sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003e50mm Finderscopes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e812257013906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":44967211172125,"sku":"ES-FNDRRGSTALL","price":125.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Explore-Scientific-50mm-Finder-Scope-Rings-_25E2_2580_259C-Tall-FNDRRGSTALL-1__76470.1594240419.1280.1280.jpg?v=1684339175"},{"product_id":"william-optics-dsd-110-plate","title":"William Optics DSD 110 Plate","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDual Saddle Plate Design\u003c\/li\u003e\n\u003cli\u003eAccepts Vixen-Style Dovetails\u003c\/li\u003e\n\u003cli\u003eAccepts Losmandy D-Style Dovetails\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-Machined Construction\u003c\/li\u003e\n\u003cli\u003eDurable Anodized Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics DSD 110 Plate\u003c\/h2\u003e\n\u003cp\u003eThe William Optics DSD 110 Plate is a robust, universal mounting solution designed to eliminate dovetail incompatibility. Engineered to accept both Vixen-style and the larger Losmandy D-style bars, this dual saddle plate provides a secure, reliable connection point for virtually any telescope in your collection. Its precision construction ensures a rigid link between your optical tube and mount head.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Saddle: Vixen \u0026amp; Losmandy D-Style Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe core of the DSD 110 Plate is its dual-standard saddle. This design allows you to seamlessly switch between telescopes using different dovetail systems without ever needing to change the saddle on your mount. This is an essential component for observers with multiple optical tubes or for astronomy clubs where members use a variety of equipment on a shared mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eWilliam Optics Build: CNC Machining and Anodized Finish\u003c\/h3\u003e\n\u003cp\u003eReflecting William Optics' reputation for quality, the DSD 110 Plate is CNC-machined from a solid block of aluminum for maximum rigidity and a precise fit. The plate is then finished with a protective anodization process that resists scratches and corrosion from nighttime dew. Available in Black, Red, or Grey, you can choose the color that best matches your William Optics telescope or other equipment for a clean, integrated setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat does \"DSD\" mean on the William Optics DSD 110 Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eDSD\u003c\/strong\u003e stands for \"Dual Saddle Dovetail.\" This means the William Optics DSD 110 Plate is designed to securely clamp both of the two primary dovetail standards in amateur astronomy: the narrower \u003cstrong\u003eVixen-style\u003c\/strong\u003e bar and the wider \u003cstrong\u003eLosmandy D-style\u003c\/strong\u003e bar.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have telescopes with both Vixen and Losmandy bars. Will the DSD 110 Plate work for both?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. This is the primary purpose of the DSD 110 Plate. Its dual-saddle design allows you to mount a small refractor with a Vixen bar and then, minutes later, mount a large SCT with a Losmandy bar without needing to swap any hardware on your mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the DSD 110 Plate help in a multi-user or multi-scope setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe William Optics DSD 110 Plate is ideal for shared setups, such as at an observatory or an astronomy club. It standardizes the mount connection, ensuring that any member's telescope, regardless of its dovetail type, can be quickly and safely attached to the house mount, saving significant time and reducing hardware confusion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the DSD 110 Plate compatible with non-William Optics mounts?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. While designed to complement William Optics mounts, the DSD 110 Plate can be attached to any mount head that features a compatible bolt pattern. It serves as a universal adapter for a wide range of equatorial mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I choose a color for my William Optics DSD 110 Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe color choice is purely aesthetic. The William Optics DSD 110 Plate is available in \u003cstrong\u003eBlack, Red, and Grey\u003c\/strong\u003e to allow you to perfectly match the color scheme of your William Optics telescope or other anodized accessories in your imaging train.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the anodized finish on the DSD 110 Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAnodizing creates a hard, corrosion-resistant outer layer on the aluminum. This protects the DSD 110 Plate from scratches, scuffs, and the effects of moisture like dew, ensuring it maintains its function and appearance after years of use in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Options\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Black","offer_id":50206091182365,"sku":"WO-M-PRC110BL","price":52.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":44967239385373,"sku":"WO-M-PRC110RD","price":52.0,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":44967239418141,"sku":"WO-M-PRC110TG","price":52.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-DSD-110-Plate-M-PRC110-1__09703.1596133311.1280.1280.jpg?v=1684339388"},{"product_id":"william-optics-dsd-210-plate","title":"William Optics DSD 210 Plate","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e210 mm total length for balancing flexibility\u003c\/li\u003e\n\u003cli\u003eDual-profile fits both Vixen-style and Arca-Swiss clamps\u003c\/li\u003e\n\u003cli\u003e41.5 mm width provides a stable mounting surface\u003c\/li\u003e\n\u003cli\u003eCNC-machined for a precise and secure fit\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple anodized color finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics DSD 210 Plate\u003c\/h2\u003e\n\u003cp\u003eThe William Optics DSD 210 Plate solves the persistent gap between astronomical and photographic mounting standards with a single, elegant component. This 210 mm long plate features a unique dual-profile design, allowing it to lock securely into both Vixen-style astronomical saddles and Arca-Swiss photographic tripod heads. Its 41.5 mm width creates a rigid, stable platform for your equipment, eliminating the need for adapter stacks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDual-Format Design: Vixen \u0026amp; Arca-Swiss in 210 mm\u003c\/h3\u003e\n\u003cp\u003eThis plate is engineered with two distinct dovetail profiles machined into a single bar. One side conforms to the Vixen standard common on equatorial mounts and saddles, while the other matches the Arca-Swiss standard used in high-end photography. This allows you to move a small telescope or a camera with a telephoto lens between an astro-mount and a photo tripod without ever changing the plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 210 mm Foundation for Precise Balancing\u003c\/h3\u003e\n\u003cp\u003eThe 210 mm length provides ample room to slide your telescope or camera forward and back within its mounting rings or clamp. This is critical for achieving perfect balance, especially after adding a guide scope, camera, or heavy eyepiece. Precise balance reduces strain on your mount's drive motors, leading to more accurate tracking and sharper long-exposure images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the William Optics DSD 210 plate's dual dovetail?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantage is universal compatibility. The \u003cstrong\u003eWilliam Optics DSD 210 plate\u003c\/strong\u003e allows you to mount the same piece of equipment—be it a small refractor or a DSLR with a lens—onto both an astronomical mount with a \u003cstrong\u003eVixen-style saddle\u003c\/strong\u003e and a photographic tripod with an \u003cstrong\u003eArca-Swiss clamp\u003c\/strong\u003e without needing to swap plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat size telescopes are suitable for the 210 mm length of this DSD plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 210 mm plate is ideal for small-to-medium refractors (typically up to 80-90mm aperture) and other compact optical tubes. The length provides sufficient travel to balance the telescope correctly, especially when a camera or other accessories are added to the optical train.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the DSD 210 plate to mount my DSLR with a telephoto lens on a Vixen-style mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is a perfect use case. You can attach the DSD 210 plate to your lens's tripod collar or a camera L-bracket (which typically use Arca-Swiss), and then mount the entire assembly directly onto a Vixen-style saddle on a star tracker or equatorial mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the William Optics DSD 210 plate help with balancing my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 210 mm length allows you to slide the telescope within its tube rings along the plate's axis. This lets you find the precise center of gravity, ensuring the telescope is perfectly balanced on both the declination and right ascension axes of your mount. Proper balance is essential for accurate GoTo slewing and tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the DSD 210 plate compatible with Losmandy D-style saddles?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This plate is designed for the narrower Vixen (V-style) and Arca-Swiss standards. It is not physically compatible with the wider Losmandy (D-style) saddle clamps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the 41.5 mm width of the DSD 210 plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 41.5 mm width provides a broad, stable base for mounting telescope tube rings. This width helps prevent any flexing or twisting between the rings and the plate, ensuring a rigid connection between your telescope and the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e210 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e41.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eVixen \u0026amp; Arca-Swiss Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Colors\u003c\/td\u003e\n\u003ctd\u003eBlack, Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics DSD 210 Plate\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Black","offer_id":49328308683037,"sku":"WO-M-PRC210BL","price":65.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":44967239581981,"sku":"WO-M-PRC210RD","price":66.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-DSD-210-Plate-M-PRC210-1__21165.1596133312.1280.1280.jpg?v=1684339396"},{"product_id":"william-optics-dsd-245-plate","title":"William Optics DSD 245 Plate","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eLength: 245 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.33 kg \/ 0.72 lbs\u003c\/li\u003e\n\u003cli\u003eDovetail Compatibility: Vixen \u0026amp; Arca-Swiss\u003c\/li\u003e\n\u003cli\u003eCNC-machined construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics DSD 245 Plate\u003c\/h2\u003e\n\u003cp\u003eThe William Optics DSD 245 Plate is a rigid, 245 mm mounting solution that natively fits both Vixen-style and Arca-Swiss saddles, eliminating the need for adapters. Measuring 43.5 mm wide and weighing just 0.33 kg (0.72 lbs), it adds secure, full-contact support to your optical tube without consuming valuable payload capacity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 245mm Vixen \u0026amp; Arca-Swiss Dual Saddle Plate\u003c\/h3\u003e\n\u003cp\u003eThis 245 mm plate is engineered with both the Vixen and Arca-Swiss dovetail profiles machined into a single, solid bar. This innovative dual-sided design allows you to move an optical tube assembly from a Vixen-style astronomical mount to a standard Arca-Swiss photographic tripod head in seconds, without ever changing the plate.\u003c\/p\u003e\n\u003cp\u003eThe integrated design ensures a secure, full-contact connection in either saddle type. This prevents the flexure and instability that can occur when stacking multiple adapters to bridge the two most common mounting standards in astronomy and photography.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eLightweight \u0026amp; Rigid at 0.33 kg\u003c\/h3\u003e\n\u003cp\u003eAt just 0.33 kg (0.72 lbs), the DSD 245 plate provides a solid mounting point for your hardware while preserving your mount's precious payload capacity for cameras and other accessories. Its 245 mm length offers ample surface area for secure tube ring placement, making it an ideal choice for balancing small to medium-sized refractors and other compact optical tubes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength (245 mm):\u003c\/strong\u003e Provides excellent stability for refractors up to the 100mm class or for perfectly balancing smaller instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (0.33 kg):\u003c\/strong\u003e Keeps your total setup weight low, improving tracking accuracy and responsiveness from your mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC Machined:\u003c\/strong\u003e Guarantees a precise fit in any compatible saddle, providing a reliable and non-slip connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat types of telescopes work best with the William Optics DSD 245 Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliam Optics DSD 245 Plate\u003c\/strong\u003e, with its 245 mm length, is ideally suited for small to medium-sized telescopes. This includes most short-tube refractors (like the William Optics RedCat or GT series), smaller Maksutov-Cassegrains, and camera lenses mounted via a lens collar.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the dual Vixen\/Arca-Swiss feature on the DSD 245 Plate benefit me?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary benefit of the \u003cstrong\u003eWilliam Optics DSD 245 Plate\u003c\/strong\u003e is its universal compatibility. You can attach your telescope to an astronomical mount with a Vixen-style saddle for night imaging, then quickly detach it and mount it on a photographic ball head with an Arca-Swiss clamp for daytime use, all without tools or adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the 245 mm length of the DSD 245 Plate be sufficient for my William Optics GT81 refractor?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the 245 mm length of the \u003cstrong\u003eWilliam Optics DSD 245 Plate\u003c\/strong\u003e is an excellent match for a telescope like the GT81. It provides enough length to adjust the position of the tube rings for precise balancing, which is critical for accurate tracking, especially when adding a guide scope or heavy camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount the William Optics DSD 245 Plate directly to my camera for use with a telephoto lens?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, if your telephoto lens has a rotating tripod collar with standard 1\/4\"-20 mounting holes, you can attach the \u003cstrong\u003eWilliam Optics DSD 245 Plate\u003c\/strong\u003e. This setup allows you to mount a heavy lens and camera body securely on either a Vixen-style star tracker or a standard Arca-Swiss tripod head.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the William Optics DSD 245 Plate's 0.33 kg weight?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAt only \u003cstrong\u003e0.33 kg (0.72 lbs)\u003c\/strong\u003e, the plate adds minimal weight to your imaging setup. This is crucial for smaller mounts and star trackers, as it leaves more of the mount's payload capacity available for your telescope, camera, and other accessories, leading to better tracking and stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the William Optics DSD 245 Plate compatible with all Vixen and Arca-Swiss clamps?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliam Optics DSD 245 Plate\u003c\/strong\u003e is designed to standard Vixen and Arca-Swiss specifications and is compatible with the vast majority of clamps on the market. However, due to minor variations between manufacturers, it's always good practice to ensure the clamp can open wide enough to accept the 43.5 mm plate width.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e245 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e43.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eVixen ↔ Arca-Swiss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.33 kg \/ 0.72 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics DSD 245 Plate\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Red","offer_id":44967239680285,"sku":"WO-M-PRC245RD","price":80.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":49863643201821,"sku":"WO-M-PRC245BL","price":71.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-DSD-245-Plate-M-PRC245-1__16399.1596133312.1280.1280.jpg?v=1684339639"},{"product_id":"william-optics-losmandy-style-type-d","title":"William Optics Losmandy Style Type D","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eLength: 400 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.44 kg \/ 3.17 lbs\u003c\/li\u003e\n\u003cli\u003eWidth: 105 mm\u003c\/li\u003e\n\u003cli\u003eDovetail Type: Losmandy D-Style\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics Losmandy Style D-Type Dovetail Plate\u003c\/h2\u003e\n\u003cp\u003eThe William Optics Losmandy Style D-Type Dovetail Plate provides a rigid, full-length mounting platform for large optical tubes, measuring 400 mm long and 105 mm wide. This plate is precision-machined from solid aluminum and weighs 1.44 kg (3.17 lbs), ensuring a secure connection to any Losmandy D-style saddle without adding excessive mass to your setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 400mm Foundation for Large Telescopes\u003c\/h3\u003e\n\u003cp\u003eAt 400 mm in length, this dovetail plate provides an extended platform essential for properly balancing larger Schmidt-Cassegrains, refractors, and astrographs. The long surface allows for greater separation between tube rings, minimizing mechanical flexure and providing multiple points of contact for a more stable and secure connection to your mount. This is critical for maintaining pointing accuracy and achieving sharp, round stars during long exposures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSignature William Optics Build: 1.44 kg of Anodized Aluminum\u003c\/h3\u003e\n\u003cp\u003eEngineered to be both strong and lightweight, this plate weighs just 1.44 kg (3.17 lbs), preserving your mount's precious payload capacity for heavier cameras and accessories. True to the William Optics standard, the plate is finished with a durable, high-quality anodization that resists scratches and corrosion. Available in signature colors including Gold, Red, and Grey, it adds a custom aesthetic to your imaging rig while delivering uncompromising mechanical integrity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat types of telescopes is the 400mm William Optics Losmandy plate designed for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003e400 mm length\u003c\/strong\u003e is ideal for larger optical tubes, typically refractors of 130mm aperture and above, or Schmidt-Cassegrains (SCTs) of 9.25\" or larger. It provides the necessary length to space tube rings far apart, which is critical for preventing flexure and achieving a precise balance with heavy imaging trains.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics D-Plate fit my non-William Optics mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This plate is manufactured to the industry-standard \u003cstrong\u003eLosmandy D-style specification\u003c\/strong\u003e. It is compatible with any mount saddle designed to accept \"D\" style plates, regardless of the mount manufacturer (e.g., Sky-Watcher, Celestron, iOptron, Software Bisque).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the advantage of this 400mm William Optics plate over a shorter dovetail?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA longer dovetail offers two main advantages. First, it provides a wider range of balancing positions, making it easier to accommodate different accessory loads (e.g., guide scopes, filter wheels, heavy cameras). Second, by allowing tube rings to be mounted further apart, it creates a more rigid mechanical connection that significantly reduces tube flexure, leading to better imaging results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow much does the William Optics Losmandy plate weigh?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe plate weighs \u003cstrong\u003e1.44 kg (3.17 lbs)\u003c\/strong\u003e. This weight is a deliberate balance between providing the structural rigidity needed for heavy telescopes and conserving your mount's total payload capacity for other equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the William Optics Losmandy plate include mounting screws for my telescope rings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMounting hardware is typically supplied with your telescope tube rings, not the dovetail plate. This plate features multiple pre-drilled and threaded holes to accommodate a wide variety of ring spacings, but you will need to use the screws that came with your specific rings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this William Optics plate suitable for a dual-scope setup on my Celestron CGX-L mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. The \u003cstrong\u003e400 mm length\u003c\/strong\u003e and \u003cstrong\u003e105 mm width\u003c\/strong\u003e provide ample surface area to mount a primary OTA and a secondary guide scope or wide-field refractor side-by-side using a separate side-by-side saddle. Its Losmandy D-style profile is a perfect fit for the CGX-L's dual saddle plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eLosmandy (D-Style)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.44 kg \/ 3.17 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics Losmandy D-Type Dovetail Plate (400mm)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cp\u003eNo downloads are available for this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Gold","offer_id":44967239844125,"sku":"WO-M-PSGD","price":192.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":44967239876893,"sku":"WO-M-PSRD","price":192.0,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":44967239909661,"sku":"WO-M-PSTG","price":167.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":52839974306077,"sku":"WO-M-PSBL","price":192.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Losmandy-Style-Type-D-Swan-Series-M-PS-1__67955.1596133313.1280.1280.jpg?v=1684339646"},{"product_id":"william-optics-long-version-vixen-style-dovetail-plate","title":"William Optics Long Version Vixen-Style Dovetail Plate","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e290 mm Extended Length for Balancing\u003c\/li\u003e\n\u003cli\u003eStandard Vixen-Style Dovetail Profile\u003c\/li\u003e\n\u003cli\u003eWeighs 0.64 kg (1.42 lbs)\u003c\/li\u003e\n\u003cli\u003e90 mm Wide Platform for Stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics Long Version Vixen-Style Dovetail Plate\u003c\/h2\u003e\n\u003cp\u003eThe William Optics Long Version Vixen-Style Dovetail Plate provides a rigid, 290 mm mounting platform essential for achieving perfect balance with demanding optical setups. Weighing just 0.64 kg (1.42 lbs), this 90 mm wide plate adds minimal mass to your payload while delivering the leverage needed to counteract heavy camera trains or large objective lenses on any Vixen-style mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e290 mm Length for Precision Balancing\u003c\/h3\u003e\n\u003cp\u003eThe primary challenge with long refractors or SCTs loaded with imaging gear is achieving a precise center of gravity. The 290 mm length of this William Optics plate provides an extensive range of adjustment, allowing you to slide your entire optical tube assembly forward or backward in the saddle to find the perfect balance point. This eliminates the need to constantly reposition tube rings, which is often impossible mid-session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Rigid 0.64 kg Foundation for Vixen-Style Mounts\u003c\/h3\u003e\n\u003cp\u003eEngineered for Vixen-style saddles, this dovetail plate creates a secure, flex-free connection between your telescope and mount. At 0.64 kg, it has enough mass to ensure rigidity across its full 290 mm span, preventing vibrations that can ruin an exposure. The 90 mm width offers a broad, stable base for your telescope's tube rings, further enhancing stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eWhy a 290 mm Plate Beats a Standard Dovetail\u003c\/h3\u003e\n\u003cp\u003eMany telescopes ship with short, basic dovetail plates that are inadequate for anything beyond simple visual use. This 290 mm plate is a critical upgrade for imagers and observers with complex setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Balancing Range:\u003c\/strong\u003e A standard plate might offer only an inch or two of adjustment. The 290 mm length gives you a significantly wider balancing window, accommodating heavy accessories like cameras, filter wheels, and guide scopes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Mounting Space:\u003c\/strong\u003e The additional length provides valuable real estate for mounting secondary accessories like a guide scope or finder scope, keeping them clear of your primary tube rings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the William Optics 290 mm Vixen dovetail plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantage is its \u003cstrong\u003e290 mm length\u003c\/strong\u003e. This provides significantly more travel for sliding your telescope within the mount's saddle, making it far easier to achieve perfect balance, especially with front-heavy or back-heavy equipment combinations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics Long Vixen Plate help balance my 8\" SCT with a heavy camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. An SCT with a camera, focal reducer, and filter wheel is very back-heavy. The 290 mm length allows you to slide the entire optical tube much farther forward in the saddle to counteract that weight and achieve proper balance on both axes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the William Optics Long Vixen Plate compatible with Losmandy-style clamps?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This plate is specifically designed with a \u003cstrong\u003eVixen-style\u003c\/strong\u003e profile. It will only fit in Vixen or dual Vixen\/Losmandy saddles. It is not compatible with mounts that use a Losmandy-D style clamp exclusively.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have a William Optics refractor. Is this 290 mm plate a good choice for my Vixen-style mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is an excellent choice for balancing William Optics refractors, especially those with larger objectives or when using a heavy flattener and camera. The 290 mm length gives you the leverage needed to balance the front-heavy nature of a refractor on a Vixen-style mount like the Celestron AVX or Sky-Watcher HEQ5.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow much does the William Optics Long Vixen Plate weigh?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe plate weighs \u003cstrong\u003e0.64 kg (1.42 lbs)\u003c\/strong\u003e. This weight is a critical part of its design, ensuring it remains rigid and does not flex under the load of a telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount guide scope rings to the William Optics Long Vixen Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 290 mm length provides ample surface area for mounting accessories between your main tube rings. However, successful mounting depends on the specific hole and slot pattern of the plate matching your guide scope rings' hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e290 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eVixen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.64 kg \/ 1.42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics Long Version Vixen-Style Dovetail Plate\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967239942429,"sku":"WO-M-PV-LII-RD","price":131.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/William-Optics-Long-Version-Vixen-Style-Dovetail-Plate-M-PV-LII-1__82498.1596133315.1280.1280.jpg?v=1684339399"},{"product_id":"william-optics-vixen-style-8-dovetail-plate-black","title":"William Optics Vixen-Style 8\" Dovetail Plate - Black","description":"\u003cul\u003e\n\t\u003cli\u003e\nDesigned to fit Vixen-style dovetail mounts\n\t\u003c\/li\u003e\n\t\u003cli\u003e\nEnsures durability and a lightweight design.\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\t\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\t\u003cli class=\"active\"\u003e\n\t\t\u003cp\u003e\nThe William Optics Vixen-Style 8\" Dovetail Plate in black is a versatile accessory designed for mounting telescopes and other optical equipment. This plate is compatible with Vixen-style dovetail mounts, which are widely used in the astronomy community for their reliability and ease of use.\n\t\t\u003c\/p\u003e\n\t\t\u003cdiv class=\"warning\"\u003e\n\t\t\t\u003cimg alt=\"Disclaimer\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/warning-logo.svg?v=1714663206\" width=\"25px\"\u003e\n\t\t\t\u003cp\u003e\nDesigned to fit Vixen-style dovetail mounts\n\t\t\t\u003c\/p\u003e\n\t\t\u003c\/div\u003e\n\t\t\n\t\t\u003cdiv\u003e\n\t\t\t\u003ch3\u003e\nCompatibility\n\t\t\t\u003c\/h3\u003e\n\t\t\t\u003chr\u003e\n\t\t\t\u003cdiv class=\"two-columns-section\"\u003e\n\t\t\t\t\u003cdiv class=\"text-side-2\"\u003e\n\t\t\t\t\t\u003cp\u003e\nDesigned to fit Vixen-style dovetail mounts, making it suitable for a wide range of telescopes and mounts.\n\t\t\t\t\t\u003c\/p\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\u003cdiv class=\"image-side-2\" data-mce-style=\"text-align: start;\" style=\"text-align: start;\"\u003e\n\t\t\t\t\t\u003cimg alt=\"\nWilliam Optics Vixen-Style 8inch Dovetail Plate - Black\n\t\t\t\t\t\t\t\" src=\"https:\/\/davidastro.com\/cdn\/shop\/products\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Black-M-PVB-4__47241.1596133316.1280.1280_1028x1028.jpg?v=1684339429%0A\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\u003c\/div\u003e\n\n\t\t\t\u003cdiv data-mce-style=\"backgroundcolor: #0a0001; border-radius: 5px;\" style=\"background-color: #0a0001; border-radius: 5px;\"\u003e\n\t\t\t\t\u003ch3 style=\"color: white!important;\"\u003e\nLength\n\t\t\t\t\u003c\/h3\u003e\n\t\t\t\t\u003chr\u003e\n\t\t\t\t\u003cdiv class=\"two-columns-section\"\u003e\n\t\t\t\t\t\u003cdiv class=\"image-side-2\" data-mce-style=\"text-align: start;\" style=\"text-align: start;\"\u003e\n\t\t\t\t\t\t\u003cimg alt=\"\nWilliam Optics Vixen-Style 8inch Dovetail Plate - Black\n\t\t\t\t\t\t\t\t\" src=\"https:\/\/davidastro.com\/cdn\/shop\/products\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Black-M-PVB-1__70333.1596133316.1280.1280_832x832.jpg?v=1684339429%0A\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\t\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\t\u003cdiv class=\"text-side-2\"\u003e\n\t\t\t\t\t\t\u003cp style=\"color: white!important;\"\u003e\nAt 8 inches, this dovetail plate provides a secure and stable connection for your telescope or optical equipment.\n\t\t\t\t\t\t\u003c\/p\u003e\n\t\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\u003c\/div\u003e\n\t\t\u003c\/div\u003e\n\n\t\t\u003ch3\u003eMaterial\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\nTypically made from high-quality aluminum, which ensures durability and a lightweight design.\n\t\t\u003c\/p\u003e\n\t\t\u003cdiv style=\"text-align: left;\"\u003e\n\t\t\t\u003cimg alt=\"\nWilliam Optics Vixen-Style 8inch Dovetail Plate - Black\n\t\t\t\t\" src=\"https:\/\/davidastro.com\/cdn\/shop\/products\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Black-M-PVB-2__37197.1596133316.1280.1280_832x832.jpg?v=1684339429%0A\" style=\"margin-right: -74px; margin-bottom: 16px; float: none;\"\u003e\n\t\t\u003c\/div\u003e\n\t\t\n\t\t\u003ch3\u003e\nColor\n\t\t\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\nThe black finish not only adds a stylish touch but also makes it easy to locate in low-light conditions often encountered during nighttime observations.\n\t\t\u003c\/p\u003e\n\t\t\n\t\t\u003ch3\u003e\nDesign\n\t\t\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\n Precision-machined for a secure fit and stability, with pre-drilled holes to accommodate different mounting requirements.\n\t\t\u003c\/p\u003e\n\n\t\t\u003ch3\u003e\nEase of Use\n\t\t\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\nSimple to attach and detach, allowing for quick setup and breakdown of your equipment.\n\t\t\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967239975197,"sku":"WO-M-PVB","price":56.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Black-M-PVB-1__70333.1596133316.1280.1280.jpg?v=1684339429"},{"product_id":"william-optics-vixen-style-8-dovetail-plate-red","title":"William Optics Vixen-Style 8\" Dovetail Plate - Red","description":"\u003cul\u003e\n\t\u003cli\u003e\nDesigned to fit Vixen-style dovetail mounts\n\t\u003c\/li\u003e\n\t\u003cli\u003e\nEnsures durability and a lightweight design.\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\t\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\t\u003cli class=\"active\"\u003e\n\t\t\u003cp\u003e\nThe William Optics Vixen-Style 8\" Dovetail Plate in red is a versatile accessory designed for mounting telescopes and other optical equipment. This plate is compatible with Vixen-style dovetail mounts, which are widely used in the astronomy community for their reliability and ease of use.\n\t\t\u003c\/p\u003e\n\t\t\u003cdiv class=\"warning\"\u003e\n\t\t\t\u003cimg alt=\"Disclaimer\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/warning-logo.svg?v=1714663206\" width=\"25px\"\u003e\n\t\t\t\u003cp\u003e\nDesigned to fit Vixen-style dovetail mounts\n\t\t\t\u003c\/p\u003e\n\t\t\u003c\/div\u003e\n\t\t\n\t\t\u003cdiv\u003e\n\t\t\t\u003ch3\u003e\nCompatibility\n\t\t\t\u003c\/h3\u003e\n\t\t\t\u003chr\u003e\n\t\t\t\u003cdiv class=\"two-columns-section\"\u003e\n\t\t\t\t\u003cdiv class=\"text-side-2\"\u003e\n\t\t\t\t\t\u003cp\u003e\nDesigned to fit Vixen-style dovetail mounts, making it suitable for a wide range of telescopes and mounts.\n\t\t\t\t\t\u003c\/p\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\u003cdiv class=\"image-side-2\" data-mce-style=\"text-align: start;\" style=\"text-align: start;\"\u003e\n\t\t\t\t\t\u003cimg alt=\"\nWilliam Optics Vixen-Style 8inch Dovetail Plate - Red\n\t\t\t\t\t\t\t\" src=\"https:\/\/davidastro.com\/cdn\/shop\/files\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Red-M-PVR-7__66873.1596133318.1280.1280_832x832.jpg?v=1684339441%0A%09%09%09%09%09%09%09\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\u003c\/div\u003e\n\n\t\t\t\u003cdiv data-mce-style=\"backgroundcolor: #0a0001; border-radius: 5px;\" style=\"background-color: #0a0001; border-radius: 5px;\"\u003e\n\t\t\t\t\u003ch3 style=\"color: white!important;\"\u003e\nLength\n\t\t\t\t\u003c\/h3\u003e\n\t\t\t\t\u003chr\u003e\n\t\t\t\t\u003cdiv class=\"two-columns-section\"\u003e\n\t\t\t\t\t\u003cdiv class=\"image-side-2\" data-mce-style=\"text-align: start;\" style=\"text-align: start;\"\u003e\n\t\t\t\t\t\t\u003cimg alt=\"\nWilliam Optics Vixen-Style 8inch Dovetail Plate - Red\n\t\t\t\t\t\t\t\t\" src=\"https:\/\/davidastro.com\/cdn\/shop\/files\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Red-M-PVR-2__93934.1596133318.1280.1280_832x832.jpg?v=1684339433%0A%09%09%09%09%09%09%09%09\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\t\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\t\u003cdiv class=\"text-side-2\"\u003e\n\t\t\t\t\t\t\u003cp style=\"color: white!important;\"\u003e\nAt 8 inches, this dovetail plate provides a secure and stable connection for your telescope or optical equipment.\n\t\t\t\t\t\t\u003c\/p\u003e\n\t\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\u003c\/div\u003e\n\t\t\u003c\/div\u003e\n\n\t\t\u003ch3\u003eMaterial\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\nTypically made from high-quality aluminum, which ensures durability and a lightweight design.\n\t\t\u003c\/p\u003e\n\t\t\u003cdiv style=\"text-align: left;\"\u003e\n\t\t\t\u003cimg alt=\"\nWilliam Optics Vixen-Style 8inch Dovetail Plate - Red\n\t\t\t\t\" src=\"https:\/\/davidastro.com\/cdn\/shop\/files\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Red-M-PVR-1__18737.1596133318.1280.1280_832x832.jpg?v=1684339431%0A%09%09%09%09\" style=\"margin-right: -74px; margin-bottom: 16px; float: none;\"\u003e\n\t\t\u003c\/div\u003e\n\t\t\n\t\t\u003ch3\u003e\nColor\n\t\t\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\nThe red finish not only adds a stylish touch but also makes it easy to locate in low-light conditions often encountered during nighttime observations.\n\t\t\u003c\/p\u003e\n\t\t\n\t\t\u003ch3\u003e\nDesign\n\t\t\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\n Precision-machined for a secure fit and stability, with pre-drilled holes to accommodate different mounting requirements.\n\t\t\u003c\/p\u003e\n\n\t\t\u003ch3\u003e\nEase of Use\n\t\t\u003c\/h3\u003e\n\t\t\u003chr\u003e\n\t\t\u003cp\u003e\nSimple to attach and detach, allowing for quick setup and breakdown of your equipment.\n\t\t\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967240007965,"sku":"WO-M-PVR","price":56.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/William-Optics-Vixen-Style-8-inch-Dovetail-Plate-Red-M-PVR-1__18737.1596133318.1280.1280.jpg?v=1684339431"},{"product_id":"william-optics-vixen-style-mounting-base","title":"William Optics Vixen Style Mounting Base","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eCompact 38 mm x 42 mm Mounting Base\u003c\/li\u003e\n\u003cli\u003eStandard Mini-Vixen Dovetail Profile\u003c\/li\u003e\n\u003cli\u003eUltra-Lightweight at Just 45 g (0.10 lbs)\u003c\/li\u003e\n\u003cli\u003eProvides a Secure Attachment Point for Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics Vixen Style Mounting Base\u003c\/h2\u003e\n\u003cp\u003eThe William Optics Vixen Style Mounting Base provides a secure Mini-Vixen dovetail connection in a compact 38mm x 42mm package. Weighing just 45 grams (0.10 lbs), it adds a rigid attachment point for finderscopes and guidescopes without affecting your telescope's balance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCompact Design: A 38mm x 42mm Footprint for Any OTA\u003c\/h3\u003e\n\u003cp\u003eWith a base measuring just 38 mm by 42 mm, this mounting platform is designed to fit nearly anywhere on your optical tube. Its minimal footprint is ideal for smaller refractors or for adding a secondary attachment point on a larger SCT without interfering with existing hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eFeatherweight Stability: Secure Mounting at Just 45 Grams\u003c\/h3\u003e\n\u003cp\u003eAt only 45 g (0.10 lbs), this base adds virtually no discernible weight to your imaging train. This prevents the need for significant counterweights when mounting essential accessories like a guidescope, keeping your entire setup balanced and responsive.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of accessories can I mount on the William Optics Vixen Style Mounting Base?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis base is designed for accessories equipped with a Mini-Vixen style dovetail bar. This standard is commonly found on \u003cstrong\u003efinderscopes, small guidescopes, and red dot finders\u003c\/strong\u003e, allowing you to add essential aiming and guiding tools to your main telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the William Optics Mounting Base compatible with standard Vixen dovetails?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe base features a \u003cstrong\u003eMini-Vixen\u003c\/strong\u003e dovetail profile, which is narrower than a standard Vixen \"D-style\" bar. While it may accept some smaller standard Vixen bars, it is specifically designed for the common \"finder-style\" dovetails. Always check your accessory's dovetail dimensions to ensure a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow much weight can the William Optics Vixen Style Base support?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile William Optics does not specify a maximum payload capacity, its 45 g weight and compact size indicate it is intended for lightweight accessories. It is ideal for \u003cstrong\u003efinders and smaller guidescopes (typically under 2-3 lbs)\u003c\/strong\u003e and is not designed for heavy accessories or secondary telescopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill I need to drill my telescope tube to install the William Optics base?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation depends on your telescope. Many William Optics telescopes come with pre-drilled holes that match this base for easy installation. If your optical tube does not have compatible mounting holes, you \u003cstrong\u003emay need to drill new holes\u003c\/strong\u003e to securely attach it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this William Optics base to mount a 50mm guidescope on my RedCat 51?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is an ideal application. The base's low 45 g weight and small 38mm x 42mm footprint make it a perfect match for adding a lightweight guidescope to a compact refractor like the \u003cstrong\u003eRedCat 51\u003c\/strong\u003e without upsetting the instrument's delicate balance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI need to add a finderscope to my 8\" SCT. Will this 38mm long base fit?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe compact 38mm length is a significant advantage for this scenario. It is small enough to fit in the tight spaces often found on the tubes of \u003cstrong\u003e8\" SCTs\u003c\/strong\u003e, allowing you to add a finder or other accessory without it conflicting with existing hardware like dovetail bars or handles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e42 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eMini-Vixen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e45 g \/ 0.10 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics Vixen Style Mounting Base\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967240106269,"sku":"WO-BAFM-ST001II","price":32.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Vixen-Style-Mounting-Base-BAFM-ST001-1__62676.1596133321.1280.1280.jpg?v=1684339470"},{"product_id":"william-optics-vixen-style-finder-mounting-bracket","title":"William Optics Vixen Style Finder Mounting Bracket","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eVixen-Style Dovetail Base\u003c\/li\u003e\n\u003cli\u003eSecure Mounting for Finderscopes and Guide Scopes\u003c\/li\u003e\n\u003cli\u003eDurable Metal Construction\u003c\/li\u003e\n\u003cli\u003eCompatible with Most Telescope Optical Tubes\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics Vixen Style Finder Mounting Bracket\u003c\/h2\u003e\n\u003cp\u003eThe William Optics Vixen Style Finder Mounting Bracket provides a reliable, industry-standard mounting point for your essential pointing and guiding accessories. This bracket serves as the universal interface between your telescope's optical tube and the finder scope or compact guide scope you rely on for accurate target acquisition and tracking. Its purpose is to deliver a secure, flex-free connection that maintains alignment session after session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe Industry Standard: Vixen-Style Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis bracket utilizes the Vixen-style dovetail, the most common and widely supported mounting standard in amateur astronomy. This ensures broad compatibility, allowing you to attach finderscopes, red dot finders, and guide scopes from numerous manufacturers to your William Optics telescope or any other scope drilled to accept this base. You are not locked into a proprietary system, giving you the freedom to mix and match accessories as your needs evolve.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRock-Solid Mounting for Finders and Guiders\u003c\/h3\u003e\n\u003cp\u003eA finder scope is useless if it doesn't stay perfectly aligned with your main telescope. The William Optics bracket is built from metal to prevent flexure that can ruin pointing accuracy. Once installed on your optical tube and with your finder locked in place, it holds alignment reliably, saving you the frustration of constant readjustments during an imaging or observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics Vixen Style Finder Bracket fit my non-William Optics telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, it is highly likely. The bracket is designed to fit the common hole patterns found on many commercial telescopes, including Schmidt-Cassegrains, Newtonians, and refractors from other brands. It is designed as a universal Vixen-style base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this William Optics bracket to mount a guide scope for imaging the Orion Nebula (M42)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. This bracket provides a stable platform for a compact guide scope and camera setup. Attaching it securely to your main imaging telescope ensures your autoguiding system has a rigid, flex-free base, which is critical for capturing sharp, round stars during long exposures of targets like the Orion Nebula (M42).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat tools are required to install the William Optics finder bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTypically, installation only requires a simple screwdriver or Allen key that matches the mounting screws supplied with the bracket or your telescope. The process involves fastening the bracket to the pre-drilled holes on your telescope's optical tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the William Optics finder bracket made of plastic or metal?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe William Optics Vixen Style Finder Mounting Bracket is made of durable metal to ensure a rigid, flex-free connection between your telescope and your finder or guide scope. This prevents alignment shifts during use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I align my finder scope after installing it on the William Optics bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFirst, point your main telescope at a distant, stationary daytime object, like a treetop or telephone pole, and center it in a low-power eyepiece. Then, look through your finder scope and use its adjustment screws to move the crosshairs until they are centered on the exact same object. Your finder is now aligned with your main scope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this William Optics bracket hold a heavy finder or a small telescope like a 50mm guide scope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This bracket is designed to securely hold standard finder scopes (e.g., 9x50) and compact guide scopes. Its metal construction provides the necessary strength and rigidity for these common accessories without introducing flexure into your imaging or observing setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967240171805,"sku":"WO-M-FB50-B","price":105.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Vixen-Style-Finder-Mounting-Bracket-M-FB50-B-1__95264.1596133321.1280.1280.jpg?v=1684339477"},{"product_id":"william-optics-vixen-style-finder-mounting-bracket-for-redcat-black-base","title":"William Optics Vixen Style Finder Mounting Bracket for RedCat - Black Base","description":"\u003cul\u003e\n\t\u003cli\u003eSeamlessly integrate with your existing astrophotography gear.\u003c\/li\u003e\n\t\u003cli\u003eEnsures stable attachment of your telescope to your mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\t\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\t\u003cli\u003eIn the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\t\u003cli class=\"active\"\u003e\n        \u003cp\u003eMount your finder scope securely with the William Optics Vixen Style Finder Mounting Bracket for RedCat, featuring a sleek black base for added style and durability.\u003c\/p\u003e\n\n\t\t\u003cdiv\u003e\n\t\t\t\u003ch3\u003eKey Features\u003c\/h3\u003e\n\t\t\t\u003chr\u003e\n\t\t\t\u003cdiv class=\"two-columns-section\"\u003e\n\t\t\t\t\u003cdiv class=\"text-side-2\"\u003e\n\t\t\t\t\t\u003cp\u003e\n\t\t\t\t\t\tHere are some key benefits and features:\n\t\t\t\t\t\u003c\/p\u003e\n\t\t\t\t\t\u003cul class=\"key-features\"\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eSecure Mounting:\u003c\/b\u003e Ensures stable attachment of your finder scope.\u003c\/li\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eSleek Black Base:\u003c\/b\u003e Adds aesthetic appeal while providing durability.\u003c\/li\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eEasy Installation:\u003c\/b\u003e Simple setup process for quick integration with your RedCat telescope.\u003c\/li\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e Designed to fit Vixen-style finder scopes and RedCat telescopes.\u003c\/li\u003e\n\t\t\t        \u003c\/ul\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\u003cdiv class=\"image-side-2\" data-mce-style=\"text-align: start;\" style=\"text-align: start;\"\u003e\n\t\t\t\t\t\u003cimg src=\"https:\/\/davidastro.com\/cdn\/shop\/products\/William-Optics-Vixen-Style-Finder-Mounting-Bracket-for-RedCat-Black-Base-M-FB50-RC-BB-1__29962.1596133322.1280.1280_832x832.jpg?v=1684339483\" style=\"margin-bottom: 16px; float: none;\" alt=\"William Optics Vixen Style Finder Mounting Bracket for RedCat\"\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\u003c\/div\u003e\n\t\t\u003c\/div\u003e\n\t\t\u003cdiv\u003e\n\t\t\t\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\t\t\t\u003chr\u003e\n\t\t\t\u003cp\u003eAstrophotographers seeking precise guiding solutions for improved tracking.\u003cbr\u003eEnthusiasts looking to enhance their telescope setup with reliable accessories.\u003c\/p\u003e\n\t\t\u003c\/div\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\t\u003cul\u003e\n\t\t\t\u003cli\u003eVixen Style Finder Mounting Bracket for RedCat - Black Base\u003c\/li\u003e\n\t\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967240204573,"sku":"WO-M-FB50-RC-BB","price":115.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Vixen-Style-Finder-Mounting-Bracket-for-RedCat-Black-Base-M-FB50-RC-BB-1__29962.1596133322.1280.1280.jpg?v=1684339483"},{"product_id":"william-optics-slide-base-50mm-guiding-rings-no-adjustments-screws","title":"William Optics Slide-Base 50mm Guiding Rings - No Adjustments Screws","description":"\u003cul\u003e\n\t\u003cli\u003eSeamlessly integrate with your existing astrophotography gear.\u003c\/li\u003e\n\t\u003cli\u003eEnsures stable attachment of your telescope to your mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\t\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\t\u003cli\u003eIn the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\t\u003cli class=\"active\"\u003e\n\t\t\u003cp\u003eEnhance your astrophotography setup with the William Optics Slide-Base 50mm Guiding Rings, designed for precise guiding without the need for adjustment screws.\u003c\/p\u003e\n\n\t\t\u003cdiv\u003e\n\t\t\t\u003ch3\u003eKey Features\u003c\/h3\u003e\n\t\t\t\u003chr\u003e\n\t\t\t\u003cdiv class=\"two-columns-section\"\u003e\n\t\t\t\t\u003cdiv class=\"text-side-2\"\u003e\n\t\t\t\t\t\u003cp\u003e\n\t\t\t\t\t\tHere are some key benefits and features:\n\t\t\t\t\t\u003c\/p\u003e\n\t\t\t\t\t\u003cul\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eSlide-Base Design:\u003c\/b\u003e Allows for effortless adjustment and fine-tuning of guiding scopes.\u003c\/li\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eNo Adjustment Screws:\u003c\/b\u003e Simplifies setup and reduces maintenance.\u003c\/li\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eSecure Mounting:\u003c\/b\u003e Ensures stability during long exposure photography sessions.\u003c\/li\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eDurable Construction:\u003c\/b\u003e Crafted from high-quality materials for reliability and longevity.\u003c\/li\u003e\n\t\t\t            \u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e Compatible with most telescopes and mounting systems.\u003c\/li\u003e\n\t\t\t        \u003c\/ul\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\u003cdiv class=\"image-side-2\" data-mce-style=\"text-align: start;\" style=\"text-align: start;\"\u003e\n\t\t\t\t\t\u003cimg src=\"https:\/\/davidastro.com\/cdn\/shop\/products\/William-Optics-Slide-Base-50mm-Guiding-Rings-M-GR50IISL-1__46491.1596133322.1280.1280_832x832.jpg?v=1684339652\" style=\"margin-bottom: 16px; float: none;\" alt=\"William Optics Slide-Base 50mm Guiding Rings - No Adjustments Screws\"\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\u003c\/div\u003e\n\t\t\u003c\/div\u003e\n\t\t\u003cdiv\u003e\n\t\t\t\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\t\t\t\u003chr\u003e\n\t\t\t\u003cp\u003eAstrophotographers seeking precise guiding solutions for improved tracking.\u003cbr\u003eEnthusiasts looking to enhance their telescope setup with reliable accessories.\u003c\/p\u003e\n\t\t\u003c\/div\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\t\u003cul\u003e\n\t\t\t\u003cli\u003eSlide-Base 50mm Guiding Rings\u003c\/li\u003e\n\t\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967240728861,"sku":"WO-M-GR50IISL","price":92.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Slide-Base-50mm-Guiding-Rings-M-GR50IISL-1__46491.1596133322.1280.1280.jpg?v=1684339652"},{"product_id":"william-optics-slide-base-50mm-guiding-rings","title":"William Optics Slide-Base 50mm Guiding Rings","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eSecurely holds guidescopes and finders with a 50mm tube diameter\u003c\/li\u003e\n\u003cli\u003eSlide-base design allows for fore-and-aft adjustment for precise balancing\u003c\/li\u003e\n\u003cli\u003eEssential for eliminating tracking errors caused by an imbalanced imaging rig\u003c\/li\u003e\n\u003cli\u003eFeatures thumbscrews for fine-pointing adjustments to center a guide star\u003c\/li\u003e\n\u003cli\u003eSignature William Optics fit and finish for durability and ease of use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eWilliam Optics Slide-Base 50mm Guiding Rings\u003c\/h2\u003e\n      \u003cp\u003eThe William Optics Slide-Base 50mm Guiding Rings are a fundamental component for serious astrophotographers, offering a secure, adjustable mounting solution for any guidescope with a 50mm tube diameter. This ring set's primary function is to enable perfect balance of your entire imaging payload, a critical step for achieving the sharpest possible long-exposure images with your 50mm guide scope.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eA Secure Mount for 50mm Class Guidescopes\u003c\/h3\u003e\n      \u003cp\u003eThese rings are engineered to firmly hold your 50mm guidescope, preventing any flexure or slippage that could ruin a sub-exposure. Equipped with adjustment thumbscrews, you can easily aim your guidescope independently of your main telescope, making the process of finding and centering a suitable guide star quick and simple. This ensures your autoguider has a solid lock, night after night.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eThe Slide-Base Advantage: Balancing Your 50mm Guide System\u003c\/h3\u003e\n      \u003cp\u003eThe key feature of this design is the slide-base, which allows you to move your 50mm guidescope forward or backward along the telescope's optical axis. This capability is crucial for achieving perfect balance in both right ascension and declination. An imbalanced rig forces your mount's motors to work harder, introducing tracking errors that result in elongated stars; these rings directly solve that problem by giving you fine control over your setup's center of gravity.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the advantage of the William Optics Slide-Base 50mm Guiding Rings over fixed rings?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe primary advantage is \u003cstrong\u003ebalance\u003c\/strong\u003e. Fixed rings lock your guidescope in one position, but the \u003cstrong\u003eWilliam Optics Slide-Base 50mm Guiding Rings\u003c\/strong\u003e allow you to slide the guidescope fore and aft. This adjustment is critical for precisely balancing your entire telescope and camera payload, which reduces strain on your mount and improves autoguiding accuracy.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics 50mm Guiding Rings fit a guidescope from another brand?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. The William Optics 50mm Guiding Rings are designed to work with any guidescope or finderscope that has an outer tube diameter of \u003cstrong\u003e50mm\u003c\/strong\u003e, regardless of the manufacturer.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do these WO Slide-Base 50mm Rings help balance a heavy setup like an 8\" SCT?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eFor a telescope like an 8\" SCT with a camera and other accessories, achieving perfect balance is difficult. The \u003cstrong\u003eWilliam Optics Slide-Base 50mm Guiding Rings\u003c\/strong\u003e provide a second axis of adjustment. After balancing the main scope, you can slide the guidescope within the rings to fine-tune the balance point without having to move the entire telescope in its saddle, leading to much better tracking.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of mounting plate do I need for the William Optics Slide-Base 50mm Guiding Rings?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThese rings are designed to be mounted onto a compatible base, such as the saddle handle found on many William Optics telescopes or a universal dovetail bar that accepts this type of sliding base. This allows the rings to move freely for balancing.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eMy William Optics RedCat 51 is hard to balance. Will these 50mm rings help?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eAbsolutely. Compact, wide-field refractors like the RedCat 51 can become unbalanced quickly when a guidescope and camera are added. The \u003cstrong\u003eWilliam Optics Slide-Base 50mm Guiding Rings\u003c\/strong\u003e are an ideal solution, as they allow you to precisely counteract the weight of your accessories and achieve the perfect balance necessary for sharp, round stars.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the William Optics Slide-Base 50mm Rings for a finderscope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. If your finderscope has a \u003cstrong\u003e50mm\u003c\/strong\u003e tube diameter, these rings will hold it securely. The slide-base functionality also allows you to position the finder eyepiece at a more comfortable viewing angle.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCompatible Guidescope Diameter\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMounting Style\u003c\/td\u003e\n\u003ctd\u003eSlide-Base\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eSlide-Base 50mm Guiding Rings\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967240794397,"sku":"WO-M-GR50SL","price":105.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Slide-Base-50mm-Guiding-Rings-M-GR50SL-1__06866.1596133323.1280.1280.jpg?v=1684339658"},{"product_id":"william-optics-mounting-rings-90mm","title":"William Optics Mounting Rings 90mm","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePrecise 90mm Inner Diameter\u003c\/li\u003e\n\u003cli\u003eSolid, All-Metal Construction\u003c\/li\u003e\n\u003cli\u003eSecures Optical Tube for Astrophotography\u003c\/li\u003e\n\u003cli\u003eRequires User Measurement for Fit Confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eWilliam Optics Mounting Rings 90mm\u003c\/h2\u003e\n      \u003cp\u003eThe William Optics 90mm Mounting Rings are engineered for a single purpose: to provide an exact, zero-tolerance fit for telescope tubes with a 90mm outer diameter. This precise fit is non-negotiable for stable astrophotography, as a mismatch of even 1-2mm can introduce flexure and ruin your alignment.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eA Precise 90mm Fit: The Critical Role of Accurate Measurement\u003c\/h3\u003e\n      \u003cp\u003eThese rings are machined to a specific 90mm inner diameter and are not designed to accommodate variations. An optical tube that is even slightly larger will not fit. This rigidity is a feature, not a limitation, as it ensures your telescope is held securely without any possibility of shifting during an imaging session or slew.\u003c\/p\u003e\n      \u003cp\u003eBefore ordering, it is essential that you physically measure the outer diameter of your telescope tube with calipers. Do not rely on manufacturer-stated specifications, which can change between production runs. Confirmation of the 90mm dimension is the buyer's responsibility to guarantee compatibility.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics 90mm rings fit my telescope tube that measures 91mm?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo. The William Optics 90mm rings are machined for a precise fit and have no tolerance for oversized tubes. If your telescope's outer diameter exceeds 90mm, even by 1-2mm, these rings will not fit.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow should I measure my telescope for the William Optics 90mm rings?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eFor the most accurate measurement, use a set of digital or dial calipers. Measure the outer diameter of the main optical tube in several places to ensure it is consistently 90mm. Do not rely on specifications found online or in manuals, as these can vary from the actual product.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use these 90mm rings to mount a William Optics Guide Star 61 guide scope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYou must measure the physical outer diameter of your specific Guide Star 61. While the model name suggests a certain aperture, the tube's outer diameter can be different. We do not maintain compatibility lists; a direct measurement of your equipment is the only way to confirm the 90mm requirement.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eI plan to mount a 90mm finder scope on my main telescope. What else do I need besides these William Optics rings?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThese 90mm rings will hold the finder scope tube itself. To attach them to your main telescope, you will need a dovetail bar (sold separately) that is compatible with both the rings and your main telescope's mounting points or saddle. Mounting hardware to attach the rings to the bar is also typically sold separately.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is such a tight tolerance important for the William Optics 90mm rings?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eA precise, non-slip fit is critical for astrophotography. Any play or movement between the rings and the optical tube can cause image shift, trailing stars, and loss of guiding accuracy. The rigid 90mm design ensures the optical tube and any attached guide scope remain perfectly aligned with the mount throughout the night.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eAre the screws for attaching the William Optics 90mm rings to a dovetail bar included?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo. Mounting hardware is generally not included. The type and length of screws required depend on the specific dovetail bar you are using, so you will need to source the appropriate screws for your setup separately.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWO-M-M80R-B\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003e90mm Mounting Rings\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1 pair\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967240827165,"sku":"WO-M-M80R-B","price":246.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Mounting-Rings-90mm-M-M80R-B-1__80209.1596133324.1280.1280.jpg?v=1684339664"},{"product_id":"william-optics-cat-mounting-ring","title":"William Optics Cat Mounting Ring","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e50mm Inner Diameter\u003c\/li\u003e\n\u003cli\u003eSolid Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eAnodized Blue Finish\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 Threaded Mounting Holes\u003c\/li\u003e\n\u003cli\u003eWeight: 4.9 oz (140 g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eWilliam Optics Cat Mounting Ring\u003c\/h2\u003e\n      \u003cp\u003eThe William Optics Cat Mounting Ring is a secure, custom-fit mounting point for telescope tubes with a precise 50mm outer diameter. Machined from solid aluminum and weighing just 4.9 oz (140 g), it adds minimal weight while offering standard 1\/4\"-20 threaded holes for attaching to dovetail bars or other accessories.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003ePrecision-Machined for a 50mm Tube Diameter\u003c\/h3\u003e\n      \u003cp\u003eThis is not a one-size-fits-most solution. The William Optics Cat ring is engineered for an exact 50mm tube diameter, ensuring a rigid, non-slip connection without marring your telescope's finish. The solid aluminum construction prevents the flexure that can ruin a long exposure when using the ring for a guide scope.\u003c\/p\u003e\n      \u003cp\u003eBecause the fit is so precise, you must verify your telescope's dimensions before purchasing. These rings are manufactured with zero tolerance for tubes larger than 50mm—even a 1mm difference will prevent a fit. We strongly advise using calipers to measure your optical tube directly rather than relying on published specifications, which can change between production runs.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSolid Aluminum Construction:\u003c\/strong\u003e Machined from a single block for maximum rigidity and zero flexure, weighing only 4.9 oz (140 g).\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003e50mm Inner Diameter:\u003c\/strong\u003e Designed for a perfect, non-marring fit on telescope tubes with an exact 50mm outer diameter.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eAnodized Blue Finish:\u003c\/strong\u003e Provides a durable, corrosion-resistant surface that matches William Optics' distinctive aesthetic.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003e1\/4\"-20 Mounting Holes:\u003c\/strong\u003e Offers standard threading for secure attachment to Vixen or Losmandy style dovetail plates.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics Cat Mounting Ring fit my telescope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis ring is designed exclusively for any optical tube with an \u003cstrong\u003eexact 50mm outer diameter\u003c\/strong\u003e. Because manufacturer specifications can change without notice, you must physically measure your telescope's tube with calipers to confirm the size before purchasing. Do not rely on published specs alone.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eMy telescope tube is 51mm. Can I make the William Optics 50mm ring fit?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003e\u003cstrong\u003eAbsolutely not.\u003c\/strong\u003e The ring has a precise 50mm inner diameter with no tolerance for larger tubes. Attempting to force it onto a 51mm tube will damage the ring, your telescope's finish, or both. You must have an exact 50mm tube for this ring to fit correctly.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs the William Optics Cat Mounting Ring sold as a single unit or a pair?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe William Optics Cat Mounting Ring is sold as a \u003cstrong\u003esingle unit\u003c\/strong\u003e. If you need a pair to mount a longer optical tube or a guide scope, you will need to purchase a quantity of two.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eI'm building a custom guide scope setup with a 50mm finder. Is this William Optics ring a good choice?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, this is an excellent application. The ring's solid aluminum build provides a rigid, flex-free platform for a 50mm guide scope, ensuring there is no differential flexure between your main telescope and your autoguiding system during an imaging session.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the mounting holes on the William Optics Cat ring for?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe ring features standard \u003cstrong\u003e1\/4\"-20 threaded holes\u003c\/strong\u003e. This is the most common thread size in photography and astronomy, allowing you to attach the ring securely to most Vixen-style or Losmandy-style dovetail plates, as well as other astronomical accessories.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the William Optics Cat Mounting Ring made of?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eIt is machined from a single piece of \u003cstrong\u003esolid aluminum\u003c\/strong\u003e and features a durable, anodized blue finish. This construction ensures it is both lightweight at just 4.9 oz (140 g) and extremely rigid.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWO-M-MR50RC-BL\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMounting Holes\u003c\/td\u003e\n\u003ctd\u003e1\/4\"-20 Threaded\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.9 oz (140 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003e50mm Cat Mounting Ring\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967241318685,"sku":"WO-M-MR50RC-BL","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Cat-Mounting-Ring-M-MR50RC-BL-1__75660.1596133325.1280.1280.jpg?v=1684339670"},{"product_id":"william-optics-120mm-saddle-handle-bar","title":"William Optics 120mm Saddle Handle Bar","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e120 mm Length\u003c\/li\u003e\n\u003cli\u003e44 mm Width\u003c\/li\u003e\n\u003cli\u003eIntegrated Mini-Vixen Style Saddle\u003c\/li\u003e\n\u003cli\u003ePatented Handlebar Design\u003c\/li\u003e\n\u003cli\u003eLightweight and Durable Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics 120mm Saddle Handle Bar\u003c\/h2\u003e\n\u003cp\u003eThe William Optics 120mm Saddle Handle Bar combines a secure, 120 mm long carrying handle with an integrated Mini-Vixen style saddle for mounting accessories. This patented, dual-purpose design measures 44 mm in width, providing a stable and compact platform for guide scopes, finders, or other small instruments without adding unnecessary bulk to your optical tube assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePatented Dual-Function Design: 120mm Handle and Saddle\u003c\/h3\u003e\n\u003cp\u003eThis handle bar is more than just an ergonomic way to carry your telescope; its patented design integrates a functional saddle directly into the handle. The 120 mm length is ideal for smaller refractors, offering a balanced grip point for transport and setup. The top of the handle is a fully functional Mini-Vixen saddle, allowing you to mount a guide scope or finder scope directly onto the optical tube's existing handle mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Compact 44mm Wide Mounting Platform\u003c\/h3\u003e\n\u003cp\u003eEngineered for stability, the handle's 44 mm width provides a solid base for any attached accessory. This prevents the flexure and vibration that can plague narrower or less rigid mounting systems, which is critical for autoguiding. The Mini-Vixen dovetail standard is compatible with a wide range of popular guide scopes and finder brackets, making this handle a seamless upgrade for your imaging rig.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary purpose of the William Optics 120mm Saddle Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe William Optics 120mm Saddle Handle Bar serves two functions. First, it acts as a secure handle to make carrying and mounting your telescope safer and easier. Second, its integrated \u003cstrong\u003eMini-Vixen saddle\u003c\/strong\u003e provides a convenient mounting point for accessories like guide scopes, finder scopes, or small cameras.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of accessories can I mount on the Mini-Vixen saddle of the 120mm Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Mini-Vixen saddle is designed for lightweight accessories that use a Mini-Vixen or small V-style dovetail bar. This typically includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuide Scopes:\u003c\/strong\u003e Compact guide scopes like the William Optics 32mm UniGuide or ZWO Mini Guide Scope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinder Scopes:\u003c\/strong\u003e Most red-dot finders and optical finder scopes that come with a V-style mounting foot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Cameras:\u003c\/strong\u003e A small camera with a V-style dovetail plate for wide-field shots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics 120mm Saddle Handle Bar fit my non-William Optics telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eCompatibility depends on the mounting hole spacing on your telescope's tube rings or top plate. You will need to measure the distance between the mounting holes on your specific telescope to ensure they match the hole pattern on the 120mm handle bar. It is designed to be a direct fit for many William Optics telescopes but can be adapted to others with the correct spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the 120mm length of this handle bar affect balancing a small refractor like a RedCat 51?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor a compact telescope like a RedCat 51, the 120mm length is ideal. It provides a solid mounting platform for a guide scope without being excessively long, which helps maintain the telescope's balance on the mount. The added weight of the handle and a guide scope is minimal and can easily be compensated for by adjusting the telescope's position in its saddle plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill a standard Vixen-style dovetail bar fit in the Mini-Vixen saddle on the 120mm Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is an important distinction. The saddle is a \u003cstrong\u003eMini-Vixen\u003c\/strong\u003e type, which is smaller than the standard Vixen (V-style) dovetail bars used for mounting telescopes. It is designed for the narrower dovetails found on finder scopes and dedicated guide scopes, not for full-sized optical tubes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the William Optics 120mm Saddle Handle Bar to mount a guide scope for imaging the Andromeda Galaxy (M31)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. The handle provides a rigid platform for a guide scope, which is essential for the long exposures needed to capture faint details in targets like the Andromeda Galaxy (M31). The 44mm width ensures there is no flex, leading to sharper stars in your final image.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eMini-Vixen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics 120mm Saddle Handle Bar\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967241351453,"sku":"WO-M-HC120BL","price":66.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-120mm-Saddle-Handle-Bar-M-HC120BL-1__96084.1596133326.1280.1280.jpg?v=1684339678"},{"product_id":"william-optics-120mm-saddle-handle-bar-with-50mm-guiding-rings-no-adjustments-screws","title":"William Optics 120mm Saddle Handle Bar with 50mm Guiding Rings - No Adjustments Screws","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e120 mm Length\u003c\/li\u003e\n\u003cli\u003eIntegrated 50mm Guide Rings\u003c\/li\u003e\n\u003cli\u003eMini-Vixen Style Top Saddle\u003c\/li\u003e\n\u003cli\u003e44 mm Width\u003c\/li\u003e\n\u003cli\u003eDesigned for Maximum Rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics 120mm Saddle Handle Bar with 50mm Guiding Rings\u003c\/h2\u003e\n\u003cp\u003eThe William Optics 120mm Saddle Handle Bar combines a secure carrying handle with an integrated 44mm wide Mini-Vixen style saddle for mounting accessories. Designed for absolute rigidity, this 120mm long handle features a pair of fixed 50mm guide rings, creating a streamlined and flexure-free platform for a compact autoguiding system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDual-Function Design: A 120mm Handle and Mini-Vixen Saddle\u003c\/h3\u003e\n\u003cp\u003eThis handle simplifies both the transport and the outfitting of your telescope. The 120mm length provides a sturdy, comfortable grip for carrying your optical tube, reducing the risk of drops during setup and teardown. Once mounted, the top surface acts as a Mini-Vixen saddle, allowing you to securely attach guide scopes, finderscopes, or other accessories with a standard V-style dovetail.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eIntegrated 50mm Guide Rings for a Rigid, Non-Adjustable Setup\u003c\/h3\u003e\n\u003cp\u003eBy eliminating adjustment screws, William Optics has engineered these 50mm guide rings for maximum stability. This design choice removes a common source of differential flexure, ensuring your guide scope and main imaging telescope remain perfectly parallel throughout an imaging session. This results in tighter stars and removes a frustrating variable from your guiding workflow.\u003c\/p\u003e\n\u003cp\u003eThe trade-off for this rigidity is a lack of independent aiming for the guide scope. You will rely on the wide field of view of your 50mm guide scope and modern guiding software like PHD2 to automatically locate a suitable guide star within the frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eChoosing Your Guiding Philosophy: Non-Adjustable vs. Adjustable Rings\u003c\/h3\u003e\n\u003cp\u003eThe choice between this handle and one with adjustable rings comes down to your priorities. An adjustable system offers the flexibility to manually point your guide scope toward a brighter guide star, which can be useful in star-poor regions of the sky. This non-adjustable version prioritizes mechanical simplicity and absolute rigidity. With no screws to work loose or shift, it provides a solid, set-and-forget mounting solution that virtually eliminates guiding errors caused by hardware flex.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the William Optics 120mm handle bar having non-adjustable 50mm rings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary benefit is \u003cstrong\u003erigidity\u003c\/strong\u003e. By removing adjustment screws, William Optics eliminates a potential source of differential flexure. This ensures your guide scope and imaging scope remain perfectly aligned, leading to better guiding accuracy and sharper stars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat can I mount on the Mini-Vixen saddle of this WO handle?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Mini-Vixen saddle is compatible with any accessory that uses a standard Vixen (V-style) dovetail bar. This includes most finderscopes, guide scopes (like the William Optics UniGuide series), and other small astronomical accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 120mm length of this handle suitable for a portable setup with a William Optics RedCat or ZenithStar telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, its compact 120mm length is an excellent match for smaller William Optics refractors like the RedCat, ZenithStar, and Gran Turismo series. It provides essential handle and guiding functionality without adding unnecessary weight or bulk to a portable imaging rig.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I center a guide star using the WO 120mm handle if the 50mm rings don't have adjustment screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou rely on the wide field of view of your guide scope and your guiding software. A typical 50mm guide scope provides a large enough patch of sky that software like \u003cstrong\u003ePHD2 Guiding\u003c\/strong\u003e can almost always find a suitable guide star automatically without any need for manual aiming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this handle bar fit non-William Optics telescopes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIt may, but compatibility depends on the mounting hole spacing on the top of your telescope's tube rings. This handle is designed specifically for the hole patterns found on William Optics telescopes, so you should measure your scope's ring spacing before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Mini-Vixen saddle on the WO 120mm handle compatible with standard Losmandy-style dovetail plates?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The saddle is designed for the narrower Vixen-style (V-style) dovetail profile. It is not wide enough to accept a larger Losmandy-style (D-style) plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop Saddle Dovetail Type\u003c\/td\u003e\n\u003ctd\u003eMini-Vixen (V-Style)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuide Ring Inner Diameter\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuide Ring Adjustment\u003c\/td\u003e\n\u003ctd\u003eNone (Fixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e120mm Saddle Handle Bar with 50mm Guiding Rings\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967241679133,"sku":"WO-M-HC120BL-GR50IISL","price":140.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-120mm-Saddle-Handle-Bar-with-50mm-Guiding-Rings-M-HC120BL-GR50IISL-1__92525.1596133327.1280.1280.jpg?v=1684339685"},{"product_id":"william-optics-120mm-saddle-handle-bar-with-50mm-guiding-rings","title":"William Optics 120mm Saddle Handle Bar with 50mm Guiding Rings","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e120 mm Total Length\u003c\/li\u003e\n\u003cli\u003ePatented Handle and Saddle Design\u003c\/li\u003e\n\u003cli\u003eMini-Vixen Dovetail Saddle\u003c\/li\u003e\n\u003cli\u003eIncludes 50mm Guide Rings\u003c\/li\u003e\n\u003cli\u003e44 mm Width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics 120mm Saddle Handle Bar with 50mm Guiding Rings\u003c\/h2\u003e\n\u003cp\u003eThe patented William Optics 120mm Saddle Handle Bar is a dual-purpose accessory, combining a secure carry handle and a Mini-Vixen dovetail saddle into a single 120 mm component. This kit arrives with a matched set of 50mm guiding rings, creating a complete mounting solution for your guide scope and an essential upgrade for both portability and autoguiding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Patented 120mm Carry Handle and Mini-Vixen Saddle\u003c\/h3\u003e\n\u003cp\u003eThis patented design solves two common problems with a single accessory. It functions as a rigid, comfortable handle for safely transporting your optical tube, while the integrated 44 mm wide top surface is a Mini-Vixen style dovetail saddle for mounting guide scopes, finders, or other accessories.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Purpose Engineering:\u003c\/strong\u003e Combines a secure carry handle and a versatile accessory saddle into one CNC-machined unit, increasing rigidity and reducing weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini-Vixen Compatibility:\u003c\/strong\u003e The 120 mm long saddle accepts any accessory equipped with a standard Vixen-style dovetail bar, secured by two robust locking screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe and Easy Transport:\u003c\/strong\u003e Offers a confident grip for moving your fully-loaded telescope to and from your observing site, minimizing the risk of accidental drops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eIncluded 50mm Rings for Autoguiding Setups\u003c\/h3\u003e\n\u003cp\u003eThis kit is purpose-built for imagers, arriving with a matched pair of 50mm guiding rings. These rings mount directly to the handle bar, creating a stable platform for popular 50mm guide scopes. This integrated approach ensures solid alignment and rigidity, eliminating a common source of flexure in autoguiding systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Guiding Package:\u003c\/strong\u003e Includes two 50mm rings with non-marring nylon-tipped thumbscrews, ready for your guide scope right out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlex-Free Connection:\u003c\/strong\u003e Attaching the guide scope directly to the main OTA's handle bar creates a more rigid system than mounting it on a separate dovetail, reducing differential flexure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight and Strong:\u003c\/strong\u003e The entire assembly adds minimal weight to your imaging train while significantly improving its structural integrity and ease of use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics 120mm Saddle Handle Bar fit my RedCat 51 telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this handle bar is designed as a standard accessory for many William Optics telescopes, including the \u003cstrong\u003eRedCat series\u003c\/strong\u003e. It provides both a carrying handle and a solid mounting point for the included 50mm guide rings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a 60mm guide scope with the included rings on the William Optics Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the rings included in this specific package are designed for a \u003cstrong\u003e50mm diameter guide scope\u003c\/strong\u003e. For larger guide scopes, you would need to purchase separate, larger rings and mount them to the handle's Mini-Vixen saddle if they are attached to a Vixen bar.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat type of dovetail does the saddle on the William Optics 120mm Handle Bar accept?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe top saddle features a \u003cstrong\u003eMini-Vixen style clamp\u003c\/strong\u003e. It is designed to accept accessories that have a standard Vixen-style dovetail bar, such as guide scopes, finderscopes, or other small accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the length of the William Optics Saddle Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe handle bar has a total length of \u003cstrong\u003e120 mm\u003c\/strong\u003e. Its compact size ensures a rigid connection and makes it an ideal fit for small to medium-sized refractors without adding unnecessary bulk.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need to buy separate rings for my 50mm guide scope with this William Optics handle?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is a complete kit. The William Optics 120mm Saddle Handle Bar comes bundled with a pair of \u003cstrong\u003e50mm guiding rings\u003c\/strong\u003e, so you have everything you need to mount a compatible guide scope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does this William Optics handle bar improve my imaging setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIt improves your setup in two key ways. First, it provides a \u003cstrong\u003esecure handle for transport\u003c\/strong\u003e, reducing the risk of damaging your OTA. Second, it creates a \u003cstrong\u003erigid, integrated platform\u003c\/strong\u003e for your 50mm guide scope, which can reduce differential flexure and lead to tighter, rounder stars in your long-exposure images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Saddle Type\u003c\/td\u003e\n\u003ctd\u003eMini-Vixen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e120mm Saddle Handle Bar\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e50mm Guiding Rings\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo downloads are available for this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967241744669,"sku":"WO-M-HC120BL-GR50SL","price":163.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-120mm-Saddle-Handle-Bar-with-50mm-Guiding-Rings-M-HC120BL-GR50SL-1__08953.1596133328.1280.1280.jpg?v=1684339490"},{"product_id":"william-optics-243mm-saddle-handle-bar","title":"William Optics 243mm Saddle Handle Bar","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e243mm total length\u003c\/li\u003e\n\u003cli\u003eFunctions as both a carrying handle and an accessory saddle\u003c\/li\u003e\n\u003cli\u003ePatented design for rigidity and ergonomics\u003c\/li\u003e\n\u003cli\u003eVixen-style saddle for mounting guide scopes and other accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics 243mm Saddle Handle Bar\u003c\/h2\u003e\n\u003cp\u003eThe William Optics 243mm Saddle Handle Bar integrates a secure carrying handle and a Vixen-style accessory rail into a single, patented component. This 243mm bar is engineered to improve the portability of your telescope while simultaneously providing a rigid platform for mounting essential imaging gear like guide scopes and finder scopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 243mm Platform for Portability and Accessories\u003c\/h3\u003e\n\u003cp\u003eThis dual-function bar solves two common setup challenges. As a handle, it offers a balanced and secure grip, making it safer and easier to transport your optical tube and attach it to the mount. This minimizes the risk of accidental drops and reduces strain on the focuser or dovetail bar, which should never be used as lifting points.\u003c\/p\u003e\n\u003cp\u003eAs an accessory mount, the top features a Vixen-style saddle clamp. The generous 243mm length provides ample room to position a guide scope, finder, or other accessories, allowing you to achieve perfect balance without compromising on your imaging train configuration. This patented William Optics design ensures a solid, flex-free connection for your equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary benefit of the William Optics 243mm Saddle Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIts main benefit is combining two essential functions into one accessory. It provides a \u003cstrong\u003esafe, ergonomic handle\u003c\/strong\u003e for carrying your telescope and a \u003cstrong\u003erigid, 243mm Vixen-style saddle\u003c\/strong\u003e for mounting guide scopes or other accessories, saving space and adding convenience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of accessories can I mount on the William Optics 243mm Saddle Handle?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Vixen-style saddle is designed to accept any accessory that uses a standard Vixen dovetail bar. This commonly includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGuide scopes\u003c\/li\u003e\n\u003cli\u003eFinder scopes\u003c\/li\u003e\n\u003cli\u003eSmall piggyback cameras with dovetail plates\u003c\/li\u003e\n\u003cli\u003eOn-board computer systems (like the ZWO ASIAIR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the 243mm length of this William Optics handle help with balancing my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 243mm length allows you to slide your mounted accessories forward or backward along the bar. This provides significant leverage for making fine balance adjustments, which is critical for accurate tracking and guiding during long-exposure astrophotography.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics 243mm handle fit my non-William Optics telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eCompatibility depends on the mounting hole spacing on your telescope's tube rings or optical tube. William Optics uses standard hole patterns, but you should always measure the distance between the mounting holes on your specific telescope to ensure it matches the handle bar before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the saddle on the William Optics 243mm bar compatible with Losmandy-style plates?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this handle bar features a \u003cstrong\u003eVixen-style saddle clamp\u003c\/strong\u003e only. It is not compatible with the wider Losmandy \"D-style\" plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 243mm length of the William Optics handle suitable for all telescopes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile the 243mm length is ideal for most refractors and smaller catadioptric telescopes, it may be oversized for very short or compact optical tubes. We recommend measuring the top of your telescope to confirm that the handle will fit without overhanging excessively.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWO-M-HC243BL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e243mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eCarry Handle \u0026amp; Accessory Saddle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaddle Type\u003c\/td\u003e\n\u003ctd\u003eVixen-style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003ePatented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics 243mm Saddle Handle Bar\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967243383069,"sku":"WO-M-HC243BL","price":149.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-243mm-Saddle-Handle-Bar-M-HC243BL-1__83514.1596133329.1280.1280.jpg?v=1684339692"},{"product_id":"william-optics-243mm-saddle-handle-bar-with-all-50mm-guiding-rings","title":"William Optics 243mm Saddle Handle Bar with 50mm Guiding Rings","description":"\u003cul\u003e\n\t\u003cli\u003eCompatible with William Optics' slide-base guide rings\u003c\/li\u003e\n\t\u003cli\u003eCan be used to make William Optics telescopes portable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\t\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\t\u003cli class=\"active\"\u003e\n\t\t\u003cp\u003e\n\t\t\tThe William Optics 243mm Saddle Handle Bar with 50mm guiding rings is a sturdy and versatile accessory designed for telescope systems. It provides a secure and comfortable grip for carrying and handling the telescope, while also offering a mounting point for guiding rings and other accessories. The handle bar is precision-made from high-quality materials, ensuring a durable and reliable performance. Its compatibility with William Optics' slide-base guide rings and UniGuide 50mm Slide-Base Guide Scope makes it an ideal addition to any telescope setup.\n\t\t\u003c\/p\u003e\n\t\t\u003cdiv class=\"warning\"\u003e\n\t\t\t\u003cimg alt=\"Disclaimer\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/warning-logo.svg?v=1714663206\" width=\"25px\"\u003e\n\t\t\t\u003cp\u003e\n\t\t\t\t\u003cb\u003eCompatible with William Optics' slide-base guide rings\u003c\/b\u003e\n\t\t\t\u003c\/p\u003e\n\t\t\u003c\/div\u003e\n\n\t\t\u003cdiv\u003e\n\t\t\t\u003ch3\u003eBenefits and Features\u003c\/h3\u003e\n\t\t\t\u003chr\u003e\n\t\t\t\u003cdiv class=\"two-columns-section\"\u003e\n\t\t\t\t\u003cdiv class=\"text-side-2\"\u003e\n\t\t\t\t\t\u003cp\u003e\n\t\t\t\t\t\tHere are some key benefits and features:\n\t\t\t\t\t\u003c\/p\u003e\n\t\t\t\t\t\u003cul\u003e\n\t\t\t\t\t\t\u003cli\u003eWeight: 405 grams\u003c\/li\u003e\n\t\t\t\t\t\t\u003cli\u003eWidth: 44 mm\u003c\/li\u003e\n\t\t\t\t\t\t\u003cli\u003eCan be used with the William Optics UniGuide 50mm Slide-Base Guide Scope\u003c\/li\u003e\n\t\t\t\t\t\t\u003cli\u003eIncludes two screws for installation\u003c\/li\u003e\n\t\t\t\t\t\t\u003cli\u003eCan be used to make William Optics telescopes portable\u003c\/li\u003e\n\t\t\t\t\t\u003c\/ul\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\t\u003cdiv class=\"image-side-2\" data-mce-style=\"text-align: start;\" style=\"text-align: start;\"\u003e\n\t\t\t\t\t\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-243mm-Saddle-Handle-Bar-with-All-50mm-Guiding-Rings-M-HC243BL-GR50IISL-1__29391.1596133330.1280.1280.jpg?v=1684339698\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\t\t\t\t\u003c\/div\u003e\n\t\t\t\u003c\/div\u003e\n\t\t\u003c\/div\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Default Title","offer_id":44967243415837,"sku":"WO-M-HC243BL-GR50IISL","price":203.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-243mm-Saddle-Handle-Bar-with-All-50mm-Guiding-Rings-M-HC243BL-GR50IISL-1__29391.1596133330.1280.1280.jpg?v=1684339698"},{"product_id":"william-optics-cat-series-saddle-handle-bar","title":"William Optics Cat Series Saddle Handle Bar","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eLength: 107 mm\u003c\/li\u003e\n\u003cli\u003eIntegrated Mini-Vixen Style Saddle\u003c\/li\u003e\n\u003cli\u003eWeight: 0.12 kg \/ 0.26 lbs\u003c\/li\u003e\n\u003cli\u003eDesigned for William Optics Cat Series Telescopes\u003c\/li\u003e\n\u003cli\u003eAdds a carrying handle and accessory mounting point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics Cat Series Saddle Handle Bar\u003c\/h2\u003e\n\u003cp\u003eAdd a secure grip and a vital accessory mounting point to your William Optics Cat series telescope with the Cat Series Saddle Handle Bar, a compact 107 mm bar that integrates a Mini-Vixen style saddle and weighs just 0.12 kg (0.26 lbs). This handle is engineered to perfectly complement the fit, finish, and portability of your Cat series refractor, adding significant functionality without compromising your setup's balance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 107mm Handle with an Integrated Mini-Vixen Saddle\u003c\/h3\u003e\n\u003cp\u003eThis handle bar is a dual-purpose upgrade for your portable imaging rig. The integrated Mini-Vixen saddle provides a secure and convenient mounting point for guide scopes, finderscopes, or other small accessories, keeping your setup compact and organized. At just 107 mm in length and 44 mm in width, it fits perfectly on William Optics Cat series refractors without adding unnecessary bulk or weight.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Purpose Design:\u003c\/strong\u003e Combines a sturdy, comfortable carrying handle with a functional Mini-Vixen saddle for accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight Construction:\u003c\/strong\u003e Weighs only 0.12 kg (0.26 lbs), preserving the critical balance of your portable telescope setup on a star tracker or small mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor:\u003c\/strong\u003e The 107 mm length is scaled specifically for the compact optical tubes of the RedCat, SpaceCat, and WhiteCat telescopes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Accessory Mounting:\u003c\/strong\u003e The Mini-Vixen saddle is the industry standard for lightweight accessories, making it ideal for attaching guide scopes like the William Optics UniGuide or other compatible finders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat telescopes is the William Optics Cat Series Saddle Handle Bar designed for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis handle bar is specifically designed to match the mounting points and aesthetics of the William Optics \"Cat\" series of petzval refractors, including the RedCat, SpaceCat, and WhiteCat models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of accessories can I mount on the Cat Series Handle Bar's saddle?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe integrated \u003cstrong\u003eMini-Vixen style saddle\u003c\/strong\u003e is perfect for mounting lightweight accessories that use a corresponding dovetail bar. This typically includes guide scopes (such as the 32mm or 50mm William Optics UniGuide), red dot finders, or other small pointing devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Cat Series Handle Bar affect the balance of my RedCat 51 on a portable mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAt just \u003cstrong\u003e0.12 kg (0.26 lbs)\u003c\/strong\u003e, the handle bar adds minimal weight to your optical tube. It is unlikely to significantly affect the balance of a RedCat 51 on a capable star tracker or small equatorial mount, but you should always re-balance your entire system after adding or removing any accessory.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow long is the William Optics Cat Series Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe handle bar measures \u003cstrong\u003e107 mm\u003c\/strong\u003e in length, making it a compact addition that matches the scale of the Cat series telescopes and provides a secure grip without being cumbersome.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount a heavy guide scope to the Cat Series Handle Bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile the Mini-Vixen saddle is secure, the handle's primary purpose is for lightweight accessories. Mounting a heavy guide scope (e.g., a full 80mm refractor) is not recommended, as it could introduce flexure into your imaging train and place undue stress on the handle and the telescope's mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the color of the Cat Series Saddle Handle Bar match the telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the handle bar is available in multiple colors, including red and black, which are anodized to match the distinctive finish of the William Optics Cat series telescopes, ensuring a seamless and professional look.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e107 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eMini-Vixen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12 kg \/ 0.26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics Cat Series Saddle Handle Bar\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Red","offer_id":44967243514141,"sku":"WO-M-HCRC-RD","price":83.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":44967243546909,"sku":"WO-M-HCRC-BL","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Cat-Series-Saddle-Handle-Bar-M-HCRC-1__20520.1596133330.1280.1280.jpg?v=1684339494"},{"product_id":"william-optics-zenithstar-v1-upgrade-mounting-ring","title":"William Optics ZenithStar V1 Upgrade Mounting Ring","description":"\u003cul\u003e\n\u003cli\u003eAllows for simple installation\u003c\/li\u003e\n\u003cli\u003eMade with improved CNC for greater rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cp\u003eThe William Optics ZenithStar V1 Upgrade Mounting Ring is a precision-designed accessory for upgrading the mounting system of ZenithStar 61 version one telescopes. It provides a secure and rigid connection, enabling stable attachment to various mounts and astronomical equipment, and offers improved functionality and performance for astrophotography and observing applications.\u003c\/p\u003e\n\u003cdiv class=\"warning\"\u003e\n\u003cimg width=\"25px\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/warning-logo.svg?v=1714663206\" alt=\"Disclaimer\"\u003e\n\u003cp\u003e\u003cb\u003eDesigned for ZenithStar telescopes 61 version one.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eBenefits and Features\u003c\/h3\u003e\n\u003chr\u003e\n\u003cdiv class=\"two-columns-section\"\u003e\n\u003cdiv class=\"text-side-2\"\u003e\n\u003cp\u003eHere are some key benefits and features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for simple installation\u003c\/li\u003e\n\u003cli\u003eUsed to upgrade the mounting ring to match the latest model\u003c\/li\u003e\n\u003cli\u003eThe CAT handle bar is suitable for uniguide scopes\u003c\/li\u003e\n\u003cli\u003eMade with improved CNC for greater rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\" class=\"image-side-2\" data-mce-style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-ZenithStar-V1-Upgrade-Mounting-Ring-1__35687.1596133331.1280.1280.jpg?v=1684339751\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Gold","offer_id":44967253573917,"sku":"WO-M-R-61GD-P","price":109.0,"currency_code":"CAD","in_stock":true},{"title":"Blue","offer_id":44967253606685,"sku":"WO-M-R-61BU-P","price":109.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":44967253639453,"sku":"WO-M-R-61RD-P","price":109.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-ZenithStar-V1-Upgrade-Mounting-Ring-1__35687.1596133331.1280.1280.jpg?v=1684339751"},{"product_id":"william-optics-saddle-plate-for-vixen-style-dovetail-plate-90mm","title":"William Optics Saddle Plate for Vixen-Style Dovetail Plate - 90mm","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eLength: 90 mm\u003c\/li\u003e\n\u003cli\u003eDovetail Type: Vixen-Style\u003c\/li\u003e\n\u003cli\u003eWeight: 230 g (0.51 lbs)\u003c\/li\u003e\n\u003cli\u003eFull-Length, Non-Marring Clamp\u003c\/li\u003e\n\u003cli\u003eSignature William Optics Red Anodized Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWilliam Optics Saddle Plate for Vixen-Style Dovetail Plate - 90mm\u003c\/h2\u003e\n\u003cp\u003eUpgrade your mount with the William Optics 90mm Saddle Plate, engineered for a secure, non-marring connection with any Vixen-style dovetail. Weighing just 230g (0.51 lbs), this precision-machined saddle provides a rigid, full-surface clamp without adding significant mass to your portable imaging or observing setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 90mm Vixen Saddle with a Non-Marring Grip\u003c\/h3\u003e\n\u003cp\u003eThis saddle plate replaces basic, single-screw locks with a full-length clamping bar. This design makes contact along the entire 90 mm length of the saddle, distributing pressure evenly and creating a far more secure connection that prevents slipping and rotation. Most importantly, it protects the finish on your dovetail bars from the gouges and scratches common with single-bolt systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eLightweight 230g Construction for Small Mounts\u003c\/h3\u003e\n\u003cp\u003eAt only 230 g, this saddle is an ideal upgrade for portable star trackers and small equatorial mounts where payload capacity is critical. The compact 90 mm length provides ample stability for wide-field refractors and telephoto lens setups without introducing unnecessary weight or leverage. While perfect for compact systems, users with longer optical tubes may prefer a longer saddle for additional stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eWilliam Optics Saddle vs. Stock Single-Bolt Saddles: Security and Finish\u003c\/h3\u003e\n\u003cp\u003eMany entry-level mounts are supplied with a simple saddle that uses one or two thumbscrews to hold the telescope. This William Optics saddle represents a significant upgrade in both function and form.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Surface:\u003c\/strong\u003e A stock saddle's single bolt creates a single, high-pressure point of contact that can dent your dovetail and allow the telescope to pivot. The William Optics design clamps along a 90 mm surface, locking the equipment rigidly in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment Care:\u003c\/strong\u003e The smooth, flat clamping bar glides against your dovetail, preserving its anodized finish. Stock bolts dig directly into the aluminum, permanently marking your gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAesthetics:\u003c\/strong\u003e Finished in the signature William Optics red, this saddle adds a touch of professional build quality to your mount, matching the fit and finish of their premium telescopes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the advantage of the William Optics 90mm Saddle Plate over my mount's stock saddle?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantage is security and equipment care. Its full-length clamping bar provides a much larger contact area than a simple thumbscrew, preventing your telescope from slipping or rotating. This design also avoids scratching or denting your Vixen-style dovetail bars, preserving your equipment's condition.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the William Optics 90mm Saddle Plate fit on my Sky-Watcher Star Adventurer Pro?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is a very popular upgrade for portable trackers like the Star Adventurer and iOptron SkyGuider Pro. Its low weight of \u003cstrong\u003e230 g\u003c\/strong\u003e ensures it doesn't overburden the tracker's payload capacity, while providing a much more stable and reliable mounting platform than the standard ball head or small Vixen clamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this William Optics saddle prevent marks on my Vixen dovetail bars?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The saddle uses a flat, smooth clamping mechanism that presses firmly against the dovetail bar instead of a pointed screw that digs into it. This non-marring design is a key feature for astronomers who want to keep their equipment in pristine condition.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 90mm length of this saddle plate sufficient for a small refractor like a RedCat 51?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The \u003cstrong\u003e90 mm\u003c\/strong\u003e length is an excellent match for compact, wide-field refractors like the William Optics RedCat, Zenithstar, or similar telescopes. It provides a very secure base for imaging and visual use without being excessively large or heavy for the telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat tools are needed to install the William Optics Saddle Plate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation typically requires standard metric hex keys (Allen wrenches) to attach the saddle to your specific mount head. The required bolts and their sizes depend on the mount you are attaching it to. Mounting hardware is generally not included with the saddle itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this William Optics saddle compatible with Losmandy D-style dovetail plates?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This saddle is designed exclusively for the narrower \u003cstrong\u003eVixen-style\u003c\/strong\u003e dovetail standard. It will not accept the wider Losmandy D-style plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail Type\u003c\/td\u003e\n\u003ctd\u003eVixen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e230 g \/ 0.51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWilliam Optics Saddle Plate for Vixen-Style Dovetail Plate - 90mm\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/william-optics-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWilliam Optics 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"William Optics","offers":[{"title":"Red","offer_id":44967253737757,"sku":"WO-M-SP90RC-RD","price":109.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/William-Optics-Saddle-Plate-for-Vixen-Style-Dovetail-Plate-90mm-M-SP90RC-1__46341.1596133332.1280.1280.jpg?v=1684339756"},{"product_id":"starlight-instruments-finder-scope-bracket-for-40-55mm-finder-scope","title":"Starlight Instruments Finder Scope Bracket for 40-55mm Finder Scope","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eFits Finder Scopes with 40-55mm Outside Diameter\u003c\/li\u003e\n\u003cli\u003eLightweight Ring-Based Design\u003c\/li\u003e\n\u003cli\u003eAttaches to Starlight Instruments Feather Touch Focusers\u003c\/li\u003e\n\u003cli\u003eRequires Separate FSB Mounting Base\u003c\/li\u003e\n\u003cli\u003eCost-Effective Alternative to Standard Sleeve Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eStarlight Instruments Finder Scope Bracket for 40-55mm Finder Scope\u003c\/h2\u003e\n      \u003cp\u003eThe Starlight Instruments Finder Scope Bracket provides a secure and lightweight mounting solution for any finder scope with an outside diameter between 40mm and 55mm. Designed as a cost-effective alternative to their standard models, it integrates seamlessly with Feather Touch focusers using the separately sold FSB-CH-Bracket 2.5\/3.0 or FSB-CH-Bracket 3.5 mounting bases.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eSecure Mounting for 40-55mm Finder Scopes\u003c\/h3\u003e\n      \u003cp\u003eThis bracket offers a simple and effective way to attach your preferred finder scope directly to a premium Feather Touch focuser. Its adjustable ring design accommodates a wide range of popular finders, from standard 40mm models to larger 50mm and 55mm units, ensuring a firm grip without marring the finder's tube.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n    \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eRing Design for 40-55mm Finders: A Cost-Effective Alternative\u003c\/h3\u003e\n      \u003cp\u003eStarlight Instruments created this bracket as a more accessible option compared to their standard version. Instead of a fully machined sleeve, this model uses a simplified ring system. This design choice reduces machining time and complexity, allowing Starlight to pass the cost savings on to you without compromising the bracket's core function.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eFeather Touch Integration: FSB 2.5\/3.0 \u0026amp; 3.5 Bases\u003c\/h3\u003e\n      \u003cp\u003eTo mount this bracket, you must pair it with the correct Feather Touch finder scope base. This component is sold separately and is not included with the bracket. You will need to select either the \u003cstrong\u003eFSB-CH-Bracket 2.5\/3.0\u003c\/strong\u003e for 2.5\" and 3.0\" focusers or the \u003cstrong\u003eFSB-CH-Bracket 3.5\u003c\/strong\u003e for 3.5\" focusers to complete your setup.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Starlight Finder Scope Bracket fit my 50mm Orion finder scope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. This bracket is designed to work with any finder scope that has an outside tube diameter between \u003cstrong\u003e40mm and 55mm\u003c\/strong\u003e. A standard 50mm finder scope from Orion or other brands will fit securely within the rings.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I attach this 40-55mm bracket to my 3.0\" Feather Touch focuser?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYou will need to purchase the \u003cstrong\u003eFSB-CH-Bracket 2.5\/3.0\u003c\/strong\u003e mounting base separately. This base screws onto the threaded holes on your 3.0\" Feather Touch focuser body, and this finder scope bracket then attaches to that base.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between this Starlight finder bracket and the standard version?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe primary difference is the design and cost. This model uses a simplified \u003cstrong\u003ering system\u003c\/strong\u003e to hold the finder scope, which requires less machining. The standard Starlight Instruments version uses a more complex, fully \u003cstrong\u003emachined sleeve\u003c\/strong\u003e. This ring version offers the same core functionality at a lower price point.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Starlight 40-55mm Finder Bracket include the mounting base?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, the mounting base is \u003cstrong\u003enot included\u003c\/strong\u003e and must be purchased separately. You need to select the correct base (FSB-CH-Bracket 2.5\/3.0 or FSB-CH-Bracket 3.5) that matches the size of your Feather Touch focuser.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy did Starlight Instruments change the design from a sleeve to rings for this bracket?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe change to a ring-based system was made to create a more \u003cstrong\u003ecost-effective\u003c\/strong\u003e product. By simplifying the design and reducing the amount of custom machining required, Starlight can offer this bracket at a more accessible price while maintaining a secure hold on your finder.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Starlight bracket compatible with non-Feather Touch focusers?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThis bracket is specifically designed to attach to the proprietary \u003cstrong\u003eFSB-CH series mounting bases\u003c\/strong\u003e from Starlight Instruments, which are made for Feather Touch focusers. It is not designed for direct compatibility with focusers from other manufacturers.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCompatible Finder Diameter\u003c\/td\u003e\n\u003ctd\u003e40mm - 55mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eRequired Mounting Base\u003c\/td\u003e\n\u003ctd\u003eFSB-CH-Bracket 2.5\/3.0 or FSB-CH-Bracket 3.5 (Sold Separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eFinder Scope Bracket for 40-55mm Scopes\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/starlight-instruments-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eStarlight Instruments 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Starlight Instruments","offers":[{"title":"Default Title","offer_id":44967253967133,"sku":"SI-FSB-CH4055","price":266.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Starlight-Instruments-Finder-Scope-Bracket-for-40-55mm-Finder-Scope-FSB-CH4055-1__81952.1596313969.1280.1280.jpg?v=1684339777"},{"product_id":"starlight-instruments-finder-scope-bracket-w-50mm-60mm-sleeve","title":"Starlight Instruments Finder Scope Bracket w\/ 50mm-60mm Sleeve","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eSecurely holds finderscopes and guide scopes from 50mm to 60mm in diameter\u003c\/li\u003e\n\u003cli\u003ePrecision adjustment screws for accurate, stable alignment\u003c\/li\u003e\n\u003cli\u003eDesigned for direct mounting to Starlight Instruments focusers\u003c\/li\u003e\n\u003cli\u003eAll-metal construction eliminates flexure common in stock brackets\u003c\/li\u003e\n\u003cli\u003eNon-marring design protects your finder scope's finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eStarlight Instruments Finder Scope Bracket w\/ 50mm-60mm Sleeve\u003c\/h2\u003e\n\u003cp\u003eThe Starlight Instruments Finder Scope Bracket provides a rigid, flexure-free platform for securely mounting and precisely aligning any finderscope with a body diameter between 50mm and 60mm. Machined to the same exacting standards as their Feather Touch focusers, this bracket eliminates the instability and alignment drift that plagues standard-issue finder mounts, ensuring your pointing accuracy remains locked in all night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePrecision Alignment for 50mm to 60mm Finderscopes\u003c\/h3\u003e\n\u003cp\u003eThis bracket's primary function is to hold your finder or small guide scope in perfect alignment with your main telescope, and its design achieves this without compromise. The 50mm-60mm sleeve accommodates a wide range of popular optical finders and compact autoguiders. Unlike basic brackets that use simple thumbscrews which can mar your equipment's finish and shift under load, this system provides a secure hold and fine-tuned control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Marring Hold:\u003c\/strong\u003e The adjustment screws are designed to grip the finder tube securely without scratching or denting the finish, preserving the value and appearance of your optical equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Adjustments:\u003c\/strong\u003e Once you've aligned your finder, the robust mechanical design ensures it stays there. This is critical for GoTo accuracy and for maintaining a well-calibrated guide scope during an imaging session.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRock-Solid Mounting for Starlight Instruments Focusers\u003c\/h3\u003e\n\u003cp\u003eEngineered as a native accessory for the Starlight Instruments ecosystem, this bracket is the ideal solution for adding a finder to a telescope equipped with a Feather Touch focuser. Larger Starlight Instruments focusers, such as the 2.5\", 3.0\", and 3.5\" models, include threaded mounting holes specifically for this purpose.\u003c\/p\u003e\n\u003cp\u003eThis direct-mount system creates a single, rigid unit with the focuser, eliminating a common source of flexure found when brackets are attached to the main optical tube with less stable hardware. The result is a pointing and guiding system you can trust, built with the all-metal, USA-made integrity Starlight Instruments is known for.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I install the Starlight Instruments Finder Scope Bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bracket is designed to mount directly to the pre-drilled and threaded holes found on the body of larger Starlight Instruments Feather Touch focusers (typically 2.5\" and larger models). Installation usually involves just two screws to attach the bracket's base securely to the focuser housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Starlight Instruments bracket fit my 60mm guide scope for imaging the Andromeda Galaxy (M31)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. The sleeve is designed to hold instruments with body diameters from \u003cstrong\u003e50mm to 60mm\u003c\/strong\u003e, making it a perfect fit for most 50mm and 60mm guide scopes. Its rigid, no-flex design is essential for autoguiding, where even minuscule shifts can ruin long exposures of targets like M31.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat makes the Starlight Instruments bracket better than a standard finder bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe key differences are \u003cstrong\u003ebuild quality and stability\u003c\/strong\u003e. Stock brackets are often made of cast metal or plastic, which can flex or slip, causing your finder to lose alignment. The Starlight Instruments bracket is machined from solid metal for maximum rigidity and features a more precise adjustment mechanism that holds its position reliably.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have a William Optics telescope with a Starlight Instruments focuser upgrade. Is this the right bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, if your Starlight Instruments focuser has the threaded mounting points on its housing, this bracket is the correct and intended accessory. It creates a seamless, integrated system specifically designed for telescopes that have been upgraded with Feather Touch focusers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of adjustment mechanism does the Starlight Instruments 50mm-60mm bracket use?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eHigh-end brackets like this typically use a three-point or six-point adjustment system with non-marring, nylon-tipped screws. This allows for very fine, intuitive push-pull adjustments to precisely align the finder's crosshairs with the view in the main telescope's eyepiece.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount this bracket directly to my telescope tube if I don't have a Starlight Instruments focuser?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bracket is specifically designed for the mounting pattern on Starlight Instruments focusers. While it could potentially be adapted to a different telescope tube or mounting plate, it would require custom drilling and tapping of holes, which should only be undertaken by experienced users.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/starlight-instruments-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eStarlight Instruments 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Starlight Instruments","offers":[{"title":"Default Title","offer_id":44967254065437,"sku":"SI-FSB-5060","price":378.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Starlight-Instruments-Finder-Scope-Bracket-50mm-60mm-Sleeve-FSB-5060-1__00575.1596313970.1280.1280.jpg?v=1684339787"},{"product_id":"starlight-instruments-mounting-bracket-for-fsb-ch4055-finderscope","title":"Starlight Instruments Mounting Bracket for FSB-CH4055 Finderscope","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDesigned for the FSB-CH4055 Finderscope Base\u003c\/li\u003e\n\u003cli\u003eCompatible with 2.5\" Feather Touch Focusers\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.0\" Feather Touch Focusers\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.5\" Feather Touch Focusers\u003c\/li\u003e\n\u003cli\u003eProvides a Rigid, Flexure-Free Mounting Point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eStarlight Instruments Mounting Bracket for FSB-CH4055 Finderscope\u003c\/h2\u003e\n\u003cp\u003eThe Starlight Instruments Mounting Bracket for FSB-CH4055 Finderscope provides a dedicated attachment point for finderscopes on large-aperture 2.5\", 3.0\", and 3.5\" Feather Touch focusers. This bracket is engineered specifically for the FSB-CH4055 base, completing the 2-part system needed to mount a finder securely to the focuser body.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Mounting for 2.5\" to 3.5\" Feather Touch Focusers\u003c\/h3\u003e\n\u003cp\u003eStarlight Instruments machines its 2.5\", 3.0\", and 3.5\" Feather Touch focuser bodies with threaded holes specifically for attaching a finderscope. This bracket, paired with the FSB-CH4055 base, completes that connection, providing a solid platform that will not shift or flex during use. This ensures your finderscope remains perfectly aligned with your main telescope optics, night after night.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Connection:\u003c\/strong\u003e Attaches directly to the focuser body via the finder base for a rigid, stable platform, eliminating alignment issues caused by flexure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Starlight:\u003c\/strong\u003e Ensures perfect compatibility with the pre-drilled hole pattern on 2.5\", 3.0\", and 3.5\" Feather Touch focusers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Base:\u003c\/strong\u003e This bracket must be used with the Starlight Instruments FSB-CH4055 finderscope base (sold separately) to function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich focusers is the Starlight FSB-CH4055 Mounting Bracket compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Starlight Instruments Mounting Bracket is specifically designed for their large-format \u003cstrong\u003e2.5\"\u003c\/strong\u003e, \u003cstrong\u003e3.0\"\u003c\/strong\u003e, and \u003cstrong\u003e3.5\" Feather Touch focusers\u003c\/strong\u003e. It will not fit smaller Feather Touch focusers or focusers from other manufacturers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need any other parts to use the FSB-CH4055 Mounting Bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This product is only the mounting bracket. You must also have the \u003cstrong\u003eStarlight Instruments FSB-CH4055 finderscope base\u003c\/strong\u003e, which is sold separately. The base attaches to the focuser body, and this bracket then attaches to the base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have a 3.5\" Feather Touch Focuser on my TEC 140 refractor. Is this the correct bracket for my finder?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, provided you are also using the Starlight FSB-CH4055 base. The Starlight Instruments Mounting Bracket is made to fit the 3.5\" Feather Touch focuser body's pre-drilled mounting holes when used with the matching base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount a guide scope with the Starlight FSB-CH4055 Mounting Bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The bracket and base system provides a very rigid platform suitable for mounting not only finderscopes but also smaller, lightweight guide scopes without introducing flexure that could compromise your guiding accuracy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Starlight Mounting Bracket fit the 2\" Feather Touch focuser on my Dobsonian?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This mounting bracket is specifically designed for the larger 2.5\", 3.0\", and 3.5\" Feather Touch focuser bodies, which have a different physical size and mounting hole pattern than the 2\" models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Starlight FSB-CH4055 Mounting Bracket made of?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Starlight Instruments Mounting Bracket is machined from high-quality metal to the same precision standards as their focusers, ensuring a durable and rigid connection for your accessories. It is typically finished with black anodizing to match the aesthetics of the focuser.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Finder Base\u003c\/td\u003e\n\u003ctd\u003eStarlight Instruments FSB-CH4055\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Focuser Models\u003c\/td\u003e\n\u003ctd\u003e2.5\", 3.0\", and 3.5\" Feather Touch Focusers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMounting Bracket for FSB-CH4055 Finderscope\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/starlight-instruments-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eStarlight Instruments 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Starlight Instruments","offers":[{"title":"Default Title","offer_id":44967260291357,"sku":"SI-FSB-CH-BRACKET","price":84.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Starlight-Instruments-Mounting-Bracket-for-FSB-CH4055-Finderscope-FSB-CH-BRACKET-1__92559.1596313970.1280.1280.jpg?v=1684339555"},{"product_id":"starlight-instruments-finder-scope-bracket-w-45mm-53mm-sleeve","title":"Starlight Instruments Finder Scope Bracket w\/ 45mm-53mm Sleeve","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAccommodates finders with a 45mm to 53mm outer diameter\u003c\/li\u003e\n\u003cli\u003eDesigned for Starlight Instruments Feather Touch focusers\u003c\/li\u003e\n\u003cli\u003ePrecision-machined for a zero-flexure connection\u003c\/li\u003e\n\u003cli\u003eNon-marring set screws protect your finder scope's finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eStarlight Instruments Finder Scope Bracket w\/ 45mm-53mm Sleeve\u003c\/h2\u003e\n\u003cp\u003eThe Starlight Instruments Finder Scope Bracket provides a secure, non-marring mounting solution for finders with an outer diameter between 45mm and 53mm. Engineered to integrate seamlessly with the Starlight Instruments ecosystem, this bracket is the purpose-built link between your high-end Feather Touch focuser and your aiming device.\u003c\/p\u003e\n\u003cp\u003eUnlike universal brackets that can introduce flexure or alignment issues, this component is machined in-house in the USA with the same precision as the focusers themselves. It attaches directly to the pre-drilled mounting holes found on 2.5\", 3.0\", and 3.5\" Feather Touch focusers, ensuring a rigid, stable platform that maintains perfect alignment through temperature changes and long imaging sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 45-53mm Adjustable Bracket for Feather Touch Focusers\u003c\/h3\u003e\n\u003cp\u003eThis bracket's core is its adjustable sleeve, which securely holds any finder scope with an outer body diameter ranging from 45mm to 53mm. This covers most standard 50mm finders and many popular guide scopes. The tipped set screws are designed to grip the finder firmly without scratching or denting its finish, preserving the value of your equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Focuser Integration:\u003c\/strong\u003e Mounts directly to the threaded accessory holes on Starlight Instruments 2.5\", 3.0\", and 3.5\" Feather Touch focusers for a clean, integrated setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero-Flexure Design:\u003c\/strong\u003e Precision machining from high-grade aluminum eliminates flexure, ensuring your finder's alignment with the main telescope optics remains constant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Marring Grip:\u003c\/strong\u003e Gentle-tipped set screws hold your finder securely in place without damaging its tube, a critical detail for premium accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Starlight Instruments bracket fit my Feather Touch focuser?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this bracket is specifically designed to attach to the pre-drilled, threaded mounting holes on Starlight Instruments \u003cstrong\u003e2.5\", 3.0\", and 3.5\" Feather Touch focusers\u003c\/strong\u003e. It is not a universal bracket and may not fit other brands or smaller Feather Touch models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat size finders does this Starlight Instruments bracket support?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bracket is designed to hold finder scopes and guide scopes with an outer tube diameter between \u003cstrong\u003e45mm and 53mm\u003c\/strong\u003e. This range accommodates most standard 50mm finder scopes on the market.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this bracket to mount a 50mm finder on my Celestron C11 with a Feather Touch focuser upgrade?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. If your Celestron C11 is equipped with a 2.5\", 3.0\", or 3.5\" Feather Touch focuser, this bracket will bolt directly to the focuser body, providing a rigid platform for your 50mm finder scope. It's an ideal solution for such a setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does this bracket hold a finder scope, like a Tele Vue Starbeam, without scratching it?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe bracket uses multiple set screws that are tipped with a material softer than the finder scope's aluminum tube. This is a standard practice in all Starlight Instruments hardware, ensuring a firm grip that \u003cstrong\u003ewill not mar or scratch\u003c\/strong\u003e the finish of your finder, whether it's a Tele Vue Starbeam, a standard 8x50 finder, or a small guide scope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Starlight Instruments bracket difficult to install on my focuser?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward. The bracket attaches using the existing threaded holes on the body of compatible Feather Touch focusers. You simply need to align the bracket and tighten the mounting screws (not included) for a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy should I choose this Starlight Instruments bracket over a generic one?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary reason is \u003cstrong\u003eprecision fit and rigidity\u003c\/strong\u003e. This bracket is machined to the same tight tolerances as the Feather Touch focusers it mounts to. This guarantees a perfect fit and eliminates any chance of flexure, which can cause pointing and guiding errors that are common with less robust, universal mounting systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/starlight-instruments-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eStarlight Instruments 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Starlight Instruments","offers":[{"title":"Default Title","offer_id":44967260389661,"sku":"SI-FSB-4553","price":350.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Starlight-Instruments-Finder-Scope-Bracket-45mm-53mm-Sleeve-FSB-4553-1__10189.1596313971.1280.1280.jpg?v=1684339560"},{"product_id":"starlight-instruments-finder-scope-bracket-w-red-dot-finder","title":"Starlight Instruments Finder Scope Bracket w\/ Red Dot Finder","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eMounts directly to 2.5\", 3.0\", and 3.5\" Feather Touch focusers\u003c\/li\u003e\n\u003cli\u003eIncludes a red dot finder for intuitive, zero-magnification aiming\u003c\/li\u003e\n\u003cli\u003eProvides a stable, integrated pointing solution\u003c\/li\u003e\n\u003cli\u003eMachined to match Starlight Instruments' quality standards\u003c\/li\u003e\n\u003cli\u003eAvailable in two models to fit specific focuser sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eStarlight Instruments Finder Scope Bracket w\/ Red Dot Finder\u003c\/h2\u003e\n\u003cp\u003eThe Starlight Instruments Finder Scope Bracket provides a dedicated mounting point for the included red dot finder, integrating directly with your 2.5\", 3.0\", or 3.5\" Feather Touch focuser. By selecting either the FSB-CH-Bracket 2.5\/3.0 or FSB-CH-Bracket 3.5 base, you ensure a secure, purpose-built fit that eliminates the instability of universal mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Mounting for 2.5\", 3.0\", and 3.5\" Feather Touch Focusers\u003c\/h3\u003e\n\u003cp\u003eThis bracket is engineered to bolt directly to the threaded accessory holes found on Starlight Instruments' 2.5\", 3.0\", and 3.5\" focusers. This design creates a rigid, flexure-free platform for the finder, ensuring your alignment remains true throughout an observing session. Simply choose the base that matches your focuser model for a seamless, factory-grade installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eIntuitive Point-and-Shoot Aiming with the Included Red Dot Finder\u003c\/h3\u003e\n\u003cp\u003eThe included red dot finder simplifies the process of initial telescope alignment. Instead of squinting through a magnified optical finder, you can keep both eyes open and simply place the illuminated red dot on your target. This zero-magnification, heads-up display makes locating bright guide stars or framing large objects like the Andromeda Galaxy (M31) fast and intuitive.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich Starlight Instruments focusers is this bracket compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bracket is designed specifically for Starlight Instruments' larger helical rack and pinion focusers. You must select the correct base for your model: the \u003cstrong\u003eFSB-CH-Bracket 2.5\/3.0\u003c\/strong\u003e fits 2.5\" and 3.0\" focusers, while the \u003cstrong\u003eFSB-CH-Bracket 3.5\u003c\/strong\u003e fits 3.5\" focusers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I use this Starlight Instruments Red Dot Finder to locate the Andromeda Galaxy (M31) on my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFirst, align the red dot finder with your main telescope during the day on a distant, fixed object. At night, look for the Andromeda Galaxy (M31) with your naked eye or binoculars. Then, while looking through the finder's window, move your telescope until the illuminated red dot is superimposed over the galaxy's visible core. M31 should now be in the field of view of a low-power eyepiece in your main telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes installing the Finder Scope Bracket require drilling new holes in my Feather Touch focuser?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The bracket is designed to use the pre-drilled and tapped mounting holes that are already present on the body of the 2.5\", 3.0\", and 3.5\" Feather Touch focusers. Installation is a simple bolt-on process with no modification required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of using this Red Dot Finder on a large refractor with a 3.5\" Feather Touch focuser?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOn a large, long-focal-length refractor, the main telescope's field of view is very narrow, making it difficult to find objects. A red dot finder provides an intuitive, zero-magnification view that matches your naked-eye perspective, making it much faster to point the instrument to the correct area of the sky before switching to your main eyepiece for detailed observation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount a different finder scope to this Starlight Instruments bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bracket is specifically designed to hold the included red dot finder. It does not feature a universal dovetail shoe, so compatibility with other optical finderscopes or pointing devices is not guaranteed without modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the included Red Dot Finder battery-powered?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, like virtually all red dot finders, the illumination for the aiming reticle is powered by a small, user-replaceable battery. This allows you to adjust the brightness of the dot for optimal visibility against the night sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Focuser Bases\u003c\/td\u003e\n\u003ctd\u003eFSB-CH-Bracket 2.5\/3.0, FSB-CH-Bracket 3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eFinder Scope Bracket\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eRed Dot Finder\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/starlight-instruments-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eStarlight Instruments 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Starlight Instruments","offers":[{"title":"Default Title","offer_id":44967260684573,"sku":"SI-FSB-CHRDF","price":378.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Starlight-Instruments-Finder-Scope-Bracket-Red-Dot-Finder-FSB-CHRDF-1__29559.1596313973.1280.1280.jpg?v=1684339800"},{"product_id":"starlight-instruments-universal-dovetail-camera-mount","title":"Starlight Instruments Universal Dovetail Camera Mount","description":"\u003c!-- more --\u003e\u003cp\u003e\u003cspan\u003eThis Dovetail Camera mount works for control of lenses with Helical focusing on any DSLR camera.  This can be controlled via PC or through a Hand paddle.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis kit includes the base, 1 motor mount bracket, (you will need to select the motor mount bracket for a Feather Touch\/Micro Touch motor, or a Robo Focus motor from the drop down box), \u003cspan\u003e2 stop blocks, motor belt, and all associated hardware.  Camera is sold separately.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Instructions\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eIn the drop down boxes, you will need to select whether you need bracket for a Feather Touch\/Micro Touch motor or a Robo-focus motor.  \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eYou will also need to select whether you need the stepper motor or not.\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003eIf you have a Robo Focus Motor, you will need to measure the diameter of the shaft so we can send you the correct size of pulley\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003ePlease click the below link to view a photo taken at the Winter Star Party with the Starlight Camera Mount.  Credit for the photo goes to Richard Wright\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003ePhoto\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eSpecifications\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Starlight Instruments","offers":[{"title":"Feather Touch\/Micro Touch Motor","offer_id":44967287292189,"sku":"SI-Dovetail-FT","price":406.0,"currency_code":"CAD","in_stock":true},{"title":"Robo Focus Motor with 1\/4\" Motor Shaft","offer_id":44967287324957,"sku":"SI-Dovetail-RF-1\/4","price":406.0,"currency_code":"CAD","in_stock":true},{"title":"Robo Focus Motor with 3\/16\" Motor Shaft","offer_id":44967287357725,"sku":"SI-Dovetail-RF-3\/16","price":406.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Starlight-Instruments-Universal-Dovetail-Camera-Mount-SI-Dovetail-1__60133.1596314017.1280.1280.jpg?v=1684339734"},{"product_id":"baader-standard-dovetail-finder-base","title":"Baader Standard Dovetail Finder Base","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eMachined from a solid block of aluminum for zero flexure\u003c\/li\u003e\n\u003cli\u003eSinusoidal base provides two linear contact points for stability\u003c\/li\u003e\n\u003cli\u003eUniversal design fits a wide range of optical tube diameters\u003c\/li\u003e\n\u003cli\u003eAccepts standard Vixen\/Synta-style finder dovetails\u003c\/li\u003e\n\u003cli\u003eFlexible mounting with central hole or elongated slots\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Standard Dovetail Finder Base\u003c\/h2\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSinusoidal Base: A Milled Platform for Universal Stability\u003c\/h3\u003e\n\u003cp\u003eThe Baader Standard Dovetail Finder Base is engineered for a secure, non-flexing connection to your optical tube. Unlike cheaper cast alternatives, this base is milled from a solid block of aluminum, ensuring it will not bend or warp under the load of a finder or small guide scope. This superior construction is critical for maintaining alignment and pointing accuracy.\u003c\/p\u003e\n\u003cp\u003eIts unique sinusoidal base is designed to create two linear points of contact on any telescope tube, providing a stable, rock-free fit across a wide range of curvatures. The base can be attached using a single central screw or two screws in the elongated slots, offering flexibility for matching existing holes on your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is a milled finder base like the Baader Standard Dovetail better than a cast one?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA \u003cstrong\u003emilled base\u003c\/strong\u003e, like this one from Baader, is machined from a solid block of aluminum. This process results in a component with superior structural integrity and precise dimensions, completely eliminating flexure. Cast bases are made by pouring molten metal into a mold, which can lead to internal stresses, lower density, and a higher likelihood of bending or breaking under load.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Baader Standard Dovetail Finder Base achieve a stable fit on different telescopes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe bottom of the base features a \u003cstrong\u003esinusoidal curve\u003c\/strong\u003e. This special shape ensures that instead of touching at just one point on a curved tube, the base makes firm, linear contact at two distinct lines. This design prevents the base from rocking or shifting, providing a much more stable platform than a simple flat-bottomed base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat finders are compatible with the Baader Standard Dovetail Finder Base?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis base is designed to accept any finder scope, red dot finder, or small guide scope that uses the common \u003cstrong\u003eVixen\/Synta-style dovetail bar\u003c\/strong\u003e. This is the most prevalent standard in the industry, making the Baader base compatible with a vast majority of finder accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have a Celestron 8\" SCT. Will the Baader Standard Dovetail Finder Base fit my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The base is designed for universal compatibility with a wide range of tube diameters, including popular Schmidt-Cassegrains like the C8. Its mounting options with a central hole or wider slots allow it to be attached to many existing factory-drilled hole patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I mount the Baader Standard Dovetail Finder Base using existing holes on my optical tube?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, its design offers flexible mounting. The base includes both a central screw hole and a pair of elongated slots. This allows you to match a variety of pre-drilled hole spacings on different optical tubes without needing to drill new holes in your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Baader base prevent my heavy finder scope from flexing?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. This is the primary reason to choose a milled base. Its solid aluminum construction provides a rigid platform that \u003cstrong\u003eeliminates flexure\u003c\/strong\u003e, even with heavier accessories like a 50mm or 60mm finder scope that also serves as a guidescope. This ensures your finder remains perfectly aligned with your main telescope all night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967365968157,"sku":"BAA-2457000","price":50.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Standard-Dovetail-Finder-Base-1__97551.1597111005.1280.1280.jpg?v=1684341418"},{"product_id":"baader-stronghold-additional-set-of-eq-clamp-brackets","title":"Baader Stronghold Additional set of EQ-clamp Brackets","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds a Vixen-Style Mounting Point\u003c\/li\u003e\n\u003cli\u003eDesigned for the Baader Stronghold Tangent Assembly\u003c\/li\u003e\n\u003cli\u003eMounts to the Underside of the Stronghold\u003c\/li\u003e\n\u003cli\u003eIncludes Two Brackets and Mounting Screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Stronghold Additional set of EQ-clamp Brackets\u003c\/h2\u003e\n\u003cp\u003eThis additional set of EQ-clamp brackets is designed specifically for the underside of the Baader Stronghold Tangent Assembly. By installing these Vixen-style clamps, you can add a second, parallel mounting point to your Stronghold, enabling dual-instrument setups or providing alternative balancing and accessory mounting options. The kit includes two brackets and the necessary screws for direct, secure attachment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eExpand Your Stronghold's Mounting with Vixen-Style EQ-Clamps\u003c\/h3\u003e\n\u003cp\u003eThe Baader Stronghold is a versatile tangent assembly, and these additional EQ-clamps unlock its full potential for complex imaging rigs. By attaching this Vixen-style clamp set to the bottom of your Stronghold, you create a secure, secondary platform ideal for mounting a guidescope directly parallel to your main imaging telescope or for running two smaller instruments side-by-side. The brackets are made to integrate seamlessly with the Stronghold, and all required mounting screws are included for a straightforward installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the Baader Stronghold Additional EQ-clamp Brackets?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis bracket set allows you to add a second, Vixen-style dovetail clamp to the underside of your existing Baader Stronghold Tangent Assembly. This is used to mount a second telescope, a guidescope, or other accessories parallel to your primary instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eAre these brackets compatible with dovetail bars other than Vixen-style?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, these brackets are specifically designed to accept \u003cstrong\u003eVixen-style (V-style)\u003c\/strong\u003e dovetail bars. They are not compatible with wider Losmandy-style (D-style) plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhere do these Baader Stronghold EQ-clamp Brackets install on the Stronghold assembly?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe brackets are designed to be mounted on the \u003cstrong\u003eunderside\u003c\/strong\u003e of the Baader Stronghold body, directly opposite the primary saddle. All necessary screws are included for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this bracket set to mount a guidescope to my Baader Stronghold?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is a primary use case. You can mount your main telescope in the top clamp of the Stronghold and use this additional bracket set to attach your guidescope (on its Vixen dovetail bar) to the underside for a compact and rigid guiding setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have a heavy camera on my telescope. Can these Baader Stronghold brackets help with balancing?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. By adding a mounting point on the underside, you can attach a Vixen bar with counterweights to achieve better balance on your equatorial mount. This is especially useful when your primary instrument is significantly front-heavy or back-heavy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Baader Stronghold Additional EQ-clamp set include mounting hardware?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the set includes the required screws for attaching the two bracket pieces securely to the main body of the Baader Stronghold Tangent Assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eEQ-clamp Brackets (Vixen-style)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMounting Screws\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 Set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_Stronghold_Tangent_Assembly_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium Stronghold Tangent Assembly Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366066461,"sku":"BAA-2450317","price":66.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"baader-multipurpose-finder-bracket-mqr-iii-7x50-max-62mm","title":"Baader Multipurpose Finder Bracket MQR III 7x50 (max 62mm)","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eCNC Milled Construction for Rigidity\u003c\/li\u003e\n\u003cli\u003eQuick-Release Dovetail for Repeatable Alignment\u003c\/li\u003e\n\u003cli\u003eModular Design Adapts to Finderscopes or Red-Dot Sights\u003c\/li\u003e\n\u003cli\u003eFits Standard Vixen, Celestron, and Synta Finder Bases\u003c\/li\u003e\n\u003cli\u003eIncludes Baader Standard Base for Universal Telescope Mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Multipurpose Finder Bracket MQR III\u003c\/h2\u003e\n\u003cp\u003eThe Baader Multipurpose Finder Bracket MQR III is engineered to solve a common frustration in astronomy: losing finder alignment. This CNC-milled bracket uses a precision dovetail system that guarantees your finder returns to the exact same position every time, eliminating the need for constant realignment. Its robust, all-metal construction is so solid it can double as a secure carrying handle for your telescope, while its modular design allows it to adapt to nearly any finder type you own.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMQR III Precision: A Quick-Release System That Holds Perfect Alignment\u003c\/h3\u003e\n\u003cp\u003eThe core of the MQR III is its quick-release dovetail mechanism. Unlike simpler brackets that rely on thumbscrews pressing against a post, this system provides a rigid, repeatable connection that maintains optical axis alignment with extreme precision. You can remove your finderscope for transport and reattach it in seconds, confident that your alignment is exactly where you left it, saving valuable time under dark skies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBaader's Modular Design: Adaptable for Finderscopes and Red-Dot Sights\u003c\/h3\u003e\n\u003cp\u003eThis bracket is designed for true multipurpose use. In its standard configuration, it holds traditional finderscopes securely within its rings. For a lower-profile setup, you can remove the central riser block and attach the dovetail directly to the finder base. For red-dot finders like the Baader SkySurfer, simply remove the top mounting plate to reveal a V-channel that accepts standard Weaver-style rails, making it a single solution for all your pointing devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Mounting \u0026amp; Robust Build: Fits Most Telescopes\u003c\/h3\u003e\n\u003cp\u003eBaader ensures broad compatibility for the MQR III. The bracket's dovetail fits directly into the standard finder shoes found on many Celestron, Vixen, and Synta telescopes without any adapters. For telescopes without an integrated base, the included Baader Standard Base provides a secure mounting point for a wide range of optical tube diameters. The entire assembly is CNC-milled, resulting in a flexure-free bracket that is strong enough to serve as a reliable handle for your instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the Baader MQR III finder bracket over standard brackets?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantage is its \u003cstrong\u003erepeatable alignment\u003c\/strong\u003e. The quick-release dovetail system is machined to tight tolerances, ensuring that when you remove and reattach your finderscope, it returns to the exact same position without needing to be realigned. This saves significant time and frustration in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the MQR III bracket with a red-dot finder like a SkySurfer?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The MQR III is designed to be modular. You can remove the upper mounting plate and rings, which exposes a V-channel at the top of the center piece. This channel is designed to accept red-dot finders that use a standard Weaver-style mounting rail, such as the Baader SkySurfer III and V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need the included Baader Standard Base to mount the MQR III on my Celestron SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, you likely will not. The dovetail on the MQR III is designed to fit directly into the standard finder bases that come pre-installed on most modern Celestron, Synta, and Vixen telescopes. The included Baader Standard Base is for mounting the bracket on telescope tubes that do not have a compatible finder shoe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the modular design of the Baader MQR III benefit my setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe modular design allows you to configure the bracket for your specific needs. You can:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a standard finderscope\u003c\/strong\u003e with the included rings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount a red-dot finder\u003c\/strong\u003e by removing the top plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreate a low-profile setup\u003c\/strong\u003e by removing the 70mm center piece and attaching the dovetail directly to the base.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Baader MQR III bracket strong enough to use as a handle for my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The bracket is CNC-milled from solid metal, making it exceptionally rigid and durable. Its mechanical design is robust enough that it can safely be used as a removable carrying handle for your telescope tube assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the maximum finder scope size the MQR III can hold?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader MQR III is designed to accommodate finderscopes with a tube diameter of up to 62mm. This makes it suitable for most common 50mm and 60mm finders.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eFits Vixen, Celestron, Synta standard finder bases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCNC Milled Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinder Capacity\u003c\/td\u003e\n\u003ctd\u003eSupports finder tubes up to 62mm in diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eQuick-Release Dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eNo contents provided\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_MQR_III_and_MQR_IV_Finder_Bracket_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium MQR III and MQR IV Finder Bracket Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366426909,"sku":"BAA-2457020","price":140.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Multipurpose-Finder-Bracket-MQR-III-7x50-max-62mm-1__52427.1597111011.1280.1280.jpg?v=1684341445"},{"product_id":"baader-multipurpose-finder-bracket-mqr-iv-7x50-max-72mm","title":"Baader Multipurpose Finder Bracket MQR IV 7x50 (max 72mm)","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAccommodates finder scopes up to 72mm in diameter\u003c\/li\u003e\n\u003cli\u003eCNC-milled quick-release dovetail for precise return-to-zero alignment\u003c\/li\u003e\n\u003cli\u003eModular design allows for low-profile mounting or red-dot finder adaptation\u003c\/li\u003e\n\u003cli\u003eIncluded Baader Standard Base fits telescope tubes from 100mm to 400mm\u003c\/li\u003e\n\u003cli\u003eDoubles as a sturdy carrying handle for your telescope\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Multipurpose Finder Bracket MQR IV 7x50 (max 72mm)\u003c\/h2\u003e\n\u003cp\u003eThe Baader Multipurpose Finder Bracket MQR IV is engineered for absolute alignment stability, accommodating finder tubes up to 72mm in diameter. Its CNC-milled construction and precision dovetail ensure your finder returns to the exact same position every time, eliminating the need for realignment after transport. This bracket's robust build is so reliable it can also serve as a secure carrying handle for your telescope, fitting a wide range of tubes from 100mm to 400mm with the included base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCNC-Milled for Repeatable Pointing Accuracy\u003c\/h3\u003e\n\u003cp\u003eUnlike cheaper brackets that flex or lose alignment, the MQR IV is built around a sturdy, quick-release dovetail system. This design guarantees that the optical axis remains constant, allowing you to remove your finderscope for storage and reattach it with precision down to a hundredth of a millimeter. This return-to-zero capability saves critical time during setup, ensuring your pointing is as accurate at the end of the night as it was at the beginning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eModular Design for Guidescopes and Red-Dot Finders\u003c\/h3\u003e\n\u003cp\u003eThe MQR IV adapts to your specific needs through its configurable, multi-part design. For a lower profile, you can remove the 70mm high center piece and attach the dovetail directly to the finder ring base plate. This versatility extends to red-dot finders; by removing the upper mounting plate, the V-channel at the top of the center piece accepts any red dot finder using the common 11mm Weaver gun rail standard, such as Baader's SkySurfer series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBroad Compatibility with Vixen, Celestron \u0026amp; Synta Standards\u003c\/h3\u003e\n\u003cp\u003eEngineered for maximum flexibility, the MQR IV's dovetail rail fits directly into the existing finder bases on most telescopes from Vixen, Celestron, Synta, and others, often without needing the Baader base. For telescopes without a compatible shoe, the included Baader Standard Base provides a secure mounting point on any optical tube with a diameter between 100mm and 400mm, making this a near-universal solution for finders, guidescopes, and tele-objective lenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat makes the Baader MQR IV finder bracket superior to less expensive options?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader MQR IV's primary advantage is its \u003cstrong\u003eCNC-milled construction\u003c\/strong\u003e and \u003cstrong\u003eprecision dovetail\u003c\/strong\u003e. This ensures a rigid, flex-free connection and allows you to remove and reinstall your finder without losing alignment—a feature known as \"return-to-zero\" that cheaper, cast-metal brackets cannot reliably offer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader MQR IV as a handle for my Celestron SCT?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The mechanical design is exceptionally solid and is intended to double as a secure, removable handle for your telescope. This makes carrying and mounting heavier optical tubes like an 8\" or 9.25\" Schmidt-Cassegrain much safer and easier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow can I mount my guidescope closer to the tube with the MQR IV?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader MQR IV is modular. You can achieve a lower-profile setup by removing the 70mm central riser piece. The guidescope rings can then be attached directly to the base plate, and the dovetail can be mounted directly to that assembly, minimizing the distance to the main telescope tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Baader MQR IV compatible with red-dot finders like the SkySurfer V?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. By removing the top mounting plate with the finder rings, you expose a V-channel on the center piece. This channel is designed to accept red-dot finders that use the standard 11mm Weaver-style gun rail, including the Baader SkySurfer III and SkySurfer V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the MQR IV dovetail fit the stock finder shoe on my Vixen refractor?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, in most cases. The dovetail on the MQR IV is designed to be compatible with the standard finder bases supplied on many telescopes from \u003cstrong\u003eVixen, Celestron, and Synta\u003c\/strong\u003e. This allows you to mount the bracket directly to your telescope without using the included Baader Standard Base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is a quick-release system important for a finder bracket?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA quick-release system like the one on the MQR IV allows for easy and safe transport of your equipment. You can remove the finderscope—often one of the more fragile components—and store it separately, then reattach it at your observing site in seconds without needing to realign it with your main telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Finder Diameter\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting System\u003c\/td\u003e\n\u003ctd\u003eQuick-Release Dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Compatibility\u003c\/td\u003e\n\u003ctd\u003eVixen, Celestron, Synta finder shoes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Base Compatibility\u003c\/td\u003e\n\u003ctd\u003eTelescope tubes from 100mm to 400mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCNC-milled aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader MQR IV Finder Bracket\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Standard Base\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eM5x12 Screws\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_MQR_III_and_MQR_IV_Finder_Bracket_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium MQR III and MQR IV Finder Bracket Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366459677,"sku":"BAA-2457030","price":149.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader-Multipurpose-Finder-Bracket-MQR-IV-7x50-max-72mm-1__35792.1597111013.1280.1280.jpg?v=1684341447"},{"product_id":"baader-3-60mm-losmandy-rider-clamp","title":"Baader  3\" 60mm Losmandy Rider Clamp","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eFits standard 3-inch Losmandy D-style dovetail bars\u003c\/li\u003e\n\u003cli\u003eProvides a 60mm wide mounting platform\u003c\/li\u003e\n\u003cli\u003eSecurely holds heavy accessories like guide scopes and cameras\u003c\/li\u003e\n\u003cli\u003eEngineered for a rigid, non-flexing connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader 3\" 60mm Losmandy Rider Clamp\u003c\/h2\u003e\n\u003cp\u003eThe Baader 3\" 60mm Losmandy Rider Clamp establishes a rigid, 60mm-wide platform for mounting accessories onto any standard 3-inch Losmandy D-style dovetail bar. This clamp ensures a secure, non-marring connection for heavy equipment like guide scopes, secondary cameras, or other instrumentation, eliminating a primary source of system flexure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 60mm Platform for Heavy Accessory Mounting\u003c\/h3\u003e\n\u003cp\u003eThe clamp's 60mm width provides a substantial contact area, critical for supporting heavy or long accessories without instability. When you mount a guide scope or a piggybacked telephoto lens, this wide base prevents the rocking and twisting that can ruin long exposures, translating directly to tighter stars and more successful guiding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePrecision Clamping for 3-inch Losmandy Bars\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for the 3-inch Losmandy \"D\" profile, this Baader Rider Clamp engages the full angled surface of the dovetail bar. This precise fit distributes the clamping force evenly, creating a solid mechanical lock that resists slipping and flexure far more effectively than single-point screw solutions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBaader Engineering: A Secure, Non-Marring Grip\u003c\/h3\u003e\n\u003cp\u003eUnlike basic clamps that can dig into and damage the anodized finish of your dovetail bar, Baader components are engineered to protect your equipment. The clamping surfaces apply firm, even pressure without high-pressure points, preserving the integrity of your dovetail bar while maintaining a connection you can trust throughout an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Baader 3\" 60mm Losmandy Rider Clamp used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Baader Rider Clamp is used to add a secure mounting point on top of an existing 3-inch Losmandy-style dovetail bar. Its primary purpose is to allow you to \"piggyback\" other equipment onto your main telescope, such as a \u003cstrong\u003eguide scope, a wide-field camera with a telephoto lens, or other accessories\u003c\/strong\u003e like a finderscope or power distribution box.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the Baader 3\" Rider Clamp fit any Losmandy-style dovetail bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this clamp is designed to fit the industry-standard \u003cstrong\u003e3-inch Losmandy \"D\" profile\u003c\/strong\u003e. It will securely attach to dovetail bars from Losmandy, Celestron (CGE), and other manufacturers that adhere to this specification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does this Baader clamp prevent damage to my dovetail bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eHigh-end clamps like this Baader model use a jaw that makes full-surface contact with the angled side of the dovetail bar. This distributes the clamping force evenly across a wide area, unlike a simple set screw which concentrates all the pressure on a single point. This design \u003cstrong\u003eprevents scratches, dents, and other damage\u003c\/strong\u003e to your dovetail bar's finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader 60mm Rider Clamp to mount a heavy guide scope on my 11\" SCT's Losmandy bar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. This is an ideal application. The 60mm wide platform of the Baader Rider Clamp provides the stability needed for a typical 80mm guide scope or an Off-Axis Guider (OAG) setup, preventing flexure between the main telescope and the guiding system, which is critical for sharp, long-exposure images with an SCT.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat's the best way to attach a DSLR and lens piggyback style to a refractor using the Baader 3\" Rider Clamp?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou would first mount the Baader Rider Clamp onto the dovetail bar on top of your refractor. Then, you would typically attach a second, smaller dovetail bar (like a Vixen-style bar) to the base of your DSLR or lens mounting ring. This smaller bar can then be clamped into a saddle attached to the top of the Baader Rider Clamp, creating a secure, multi-layered system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Baader 3\" 60mm Losmandy Rider Clamp include mounting screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe included contents are not specified. Typically, mounting hardware is \u003cstrong\u003enot included\u003c\/strong\u003e with components like this, as the required screw length and thread type depend entirely on the accessory and saddle you are attaching it to. You will need to source the appropriate screws for your specific application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Drillings for\u003c\/td\u003e\n\u003ctd\u003eBaader GuideScope Rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar or Clamp?\u003c\/td\u003e\n\u003ctd\u003eClamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual mounting\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScrews included?\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamping System\u003c\/td\u003e\n\u003ctd\u003eDovetail clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003e3“ (76mm) Losmandy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366492445,"sku":"BAA-2451575","price":47.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-3-inch-60mm-Losmandy-Rider-Clamp-1__41191.1597111014.1280.1280.jpg?v=1684341463"},{"product_id":"baader-sky-surfer-iii-adapter-for-binoculars","title":"Baader Sky Surfer III  Adapter for Binoculars","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdapts Baader Sky Surfer III to Binoculars\u003c\/li\u003e\n\u003cli\u003eMounts to Standard 1\/4\"-20 Tripod Sockets\u003c\/li\u003e\n\u003cli\u003eEnables Intuitive \"Both-Eyes-Open\" Targeting\u003c\/li\u003e\n\u003cli\u003eIdeal for High-Magnification Astronomy Binoculars\u003c\/li\u003e\n\u003cli\u003eLightweight, Minimal-Profile Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eBaader Sky Surfer III Adapter for Binoculars\u003c\/h2\u003e\n\u003cp\u003eThe Baader Sky Surfer III Adapter for Binoculars solves the core challenge of aiming high-power binoculars: accurately centering a target you can't see with your naked eye. This simple, robust adapter allows you to mount a Baader Sky Surfer III red-dot finder directly onto the central axis of most porro prism binoculars. It transforms the often-frustrating experience of locating objects into an intuitive, point-and-shoot operation, letting you spend less time searching and more time observing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSecure Center-Axis Mounting for Stable Aiming\u003c\/h3\u003e\n\u003cp\u003eThis adapter is engineered to attach securely to the 1\/4\"-20 threaded socket found on the front of the center hinge of most astronomy binoculars. This mounting point ensures the Sky Surfer III finder is perfectly aligned with the optical axis of your binoculars, providing true zero-power targeting. The result is a stable, unified system where the red dot precisely indicates where your high-magnification view is pointed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eFrom Wide-Field Sweeping to Pinpoint Targeting\u003c\/h3\u003e\n\u003cp\u003eWhile low-power binoculars are easy to aim, larger 15x70 or 25x100 models have a narrow field of view that makes star-hopping difficult. With the Sky Surfer III mounted, you can keep both eyes open to see the finder's red dot projected against the sky. Simply place the dot on your target—be it Jupiter, the Orion Nebula (M42), or a faint star—and it will be waiting in the eyepiece of your binoculars, perfectly centered.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of binoculars is the Baader Sky Surfer III Adapter compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis adapter is designed for most \u003cstrong\u003eporro prism binoculars\u003c\/strong\u003e that feature a standard \u003cstrong\u003e1\/4\"-20 threaded tripod mounting socket\u003c\/strong\u003e at the end of the central hinge. It is generally not compatible with roof prism binoculars or models that lack this specific mounting point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need to own the Baader Sky Surfer III to use this adapter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This is not a standalone product but an adapter plate specifically designed to connect the \u003cstrong\u003eBaader Sky Surfer III red-dot finder\u003c\/strong\u003e (sold separately) to a pair of binoculars. It will not work with other finder models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Sky Surfer III Adapter help me find the Andromeda Galaxy (M31) with my 20x80 binoculars?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFinding a faint, diffuse object like the Andromeda Galaxy (M31) can be difficult with the narrow field of 20x binoculars. With the adapter and finder installed, you can look at the sky with both eyes open, locate the constellation Cassiopeia, and simply place the finder's red dot on the known location of M31. When you look through the binoculars, the galaxy's core will be in the field of view, saving you from sweeping back and forth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this adapter add significant weight or bulk to my binoculars?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the adapter itself is designed to be lightweight and unobtrusive. While it does add the weight of the Sky Surfer III finder, the total added weight is minimal and should not significantly affect the balance or handling of most mid-to-large-sized astronomy binoculars, especially if they are already mounted on a tripod.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Baader Sky Surfer III adapter on a tripod?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis adapter occupies the same 1\/4\"-20 mounting point used by most binocular tripod adapters (L-brackets). You cannot use both simultaneously. This accessory is primarily intended to improve handheld aiming or for use with specialized binocular mounts that grip the barrels directly, leaving the central hinge free.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the installation of the Sky Surfer III Adapter difficult?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is very simple. First, you attach the Sky Surfer III finder to the adapter plate. Then, you simply screw the entire assembly into the 1\/4\"-20 socket on your binoculars' central hinge, tightening it by hand until it is secure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Baader_Planetarium_SkySurfer_III_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBaader Planetarium SkySurfer III Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"Default Title","offer_id":44967366656285,"sku":"BAA-2957305","price":13.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Sky-Surfer-III-Adapter-for-Binoculars-1__83023.1597111018.1280.1280.jpg?v=1684341465"}],"url":"https:\/\/davidastro.com\/collections\/mounting-hardware.oembed?page=9","provider":"David Astro","version":"1.0","type":"link"}