{"title":"Hand Controllers \u0026 Drives","description":"\u003cdiv\u003e\n  \u003cp\u003e\n    A modern imaging rig is a small outdoor computer network running in the cold. Hubs, cables, power distribution, WiFi modules and controllers determine whether it runs unattended for eight hours or drops a connection at 2 a.m. David Astro carries electronic accessories in Canada, shipping from Canadian stock.\n  \u003c\/p\u003e\n  \u003cp\u003e\n    Most overnight failures we help diagnose are power or cable failures rather than software ones. Tell us what your rig is doing and we will help you find the actual cause.\n  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- more --\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eElectronics That Keep a Rig Running\u003c\/h2\u003e\n  \u003cp\u003e\n    Reliability comes from short cable runs, adequate current headroom, and connectors that survive repeated cold cycling.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePowered USB hubs:\u003c\/strong\u003e Mount-top hubs that shorten cable runs to cameras and focusers, since long unpowered USB runs are a leading cause of intermittent disconnections.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-int\/collections\/power-modules\"\u003ePower distribution boxes:\u003c\/a\u003e\u003c\/strong\u003e Convert one supply into regulated outputs for mount, camera, dew heaters and focuser, with individual fusing.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-int\/collections\/wifi-modules\"\u003eWiFi and network modules:\u003c\/a\u003e\u003c\/strong\u003e Wireless control of mounts and accessories, removing a data cable from the moving part of the rig.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-int\/collections\/cables\"\u003eCables:\u003c\/a\u003e\u003c\/strong\u003e Cold-flexible cabling in appropriate gauge, since standard PVC cable stiffens dramatically below minus 20 and can drag the mount.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eControllers and interface boxes:\u003c\/strong\u003e Devices that bridge focusers, rotators, flat panels and sensors into a single control environment.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-int\/collections\/cable-management\"\u003eCable management:\u003c\/a\u003e\u003c\/strong\u003e Clips, wraps and routing hardware that prevent the snag which ends a session and can damage a focuser.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eWhy Choose David Astro for Electronic Accessories\u003c\/h2\u003e\n  \u003cp\u003e\n    We troubleshoot these rigs regularly, so the recommendations come from failure patterns rather than specifications.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCold-weather cabling advice:\u003c\/strong\u003e We recommend cable types that stay flexible below minus 20, because stiff cable pulls on the mount and shows up as guiding error.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCurrent headroom calculated:\u003c\/strong\u003e We total your loads and specify distribution with margin, since running near capacity causes the intermittent faults that are hardest to diagnose.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUSB run length considered:\u003c\/strong\u003e We keep camera connections short with a mount-top hub, which resolves most unexplained disconnection problems.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAuthorized dealer:\u003c\/strong\u003e Genuine products with manufacturer warranty, in Canadian inventory and shipped domestically.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShips from Canada:\u003c\/strong\u003e No duties or brokerage fees for Canadian buyers.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eElectronic Accessories in Canada — Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003e\u003cstrong\u003eWhy does my camera keep disconnecting?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eUsually a long USB run, an unpowered hub, or a marginal power supply. Moving to a powered hub on the mount with short cables to the camera resolves the majority of these cases.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eDo I need a power distribution box?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eOnce you are running mount, camera, focuser and dew heaters, yes. Individual fusing and regulated outputs prevent one fault taking down the whole rig, and it removes a tangle of separate supplies.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eWhat cable should I use in winter?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eSilicone or otherwise cold-rated cable. Standard PVC stiffens below about minus 20 and can exert enough force on the mount to affect guiding, quite apart from the risk of snagging.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eIs WiFi control reliable outdoors?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eGenerally yes at short range, and it removes a cable from the moving parts. For unattended all-night operation, many imagers still prefer a wired connection to the control computer for the critical link.\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eRig dropping out overnight?\u003c\/h2\u003e\n  \u003cp\u003eDescribe the failure and we will help find the cause. Canadian stock, cold-rated components, expert support.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"celestron-aux-port-splitter","title":"Celestron AUX Port Splitter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds a second auxiliary port to your Celestron mount\u003c\/li\u003e\n\u003cli\u003eConnect two accessories at once, like a hand controller and StarSense AutoAlign\u003c\/li\u003e\n\u003cli\u003ePlugs directly into the existing AUX or hand controller port\u003c\/li\u003e\n\u003cli\u003eParallel adapter ensures both connected devices function correctly\u003c\/li\u003e\n\u003cli\u003eCovered by a 2-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron AUX Port Splitter\u003c\/h2\u003e\n\u003cp\u003eThe Celestron AUX Port Splitter instantly expands your computerized mount's connectivity by turning a single AUX or hand controller port into two. This simple adapter is the solution for running modern accessories like the StarSense AutoAlign without having to disconnect your NexStar+ hand controller, and comes with a 2-year warranty for peace of mind.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAdd a Second AUX Port to Your Celestron Mount\u003c\/h3\u003e\n\u003cp\u003eModern astronomy accessories often compete for the single auxiliary port available on many Celestron computerized mounts. The Celestron AUX Port Splitter resolves this by providing a clean, parallel connection that lets you plug in two devices simultaneously. It's an essential upgrade for anyone looking to expand their setup's capabilities without complex workarounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRun 2 Accessories Simultaneously: StarSense and Hand Control\u003c\/h3\u003e\n\u003cp\u003eThe most common use for this splitter is to enable the use of a Celestron StarSense AutoAlign accessory alongside the standard hand controller. Simply plug the splitter into the mount's AUX port, then connect both the StarSense and the hand controller to the splitter. This allows you to leverage the power of automated alignment while retaining full manual control and access to the hand controller's database.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Celestron AUX Port Splitter used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Celestron AUX Port Splitter is designed to solve the problem of having too few auxiliary ports on your Celestron computerized mount. It plugs into a single AUX or hand controller port and provides two ports in its place, allowing you to connect multiple accessories at the same time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Celestron AUX Port Splitter with a StarSense AutoAlign and my NexStar+ hand controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is its primary function. You can connect both the StarSense AutoAlign and your hand controller to the mount simultaneously, eliminating the need to swap cables. This is especially useful on mounts like the Advanced VX or NexStar SE series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this splitter work with my Celestron CGEM II mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the Celestron AUX Port Splitter is compatible with any Celestron computerized mount that uses an AUX port, including the CGEM II, Advanced VX, CGX, NexStar SE, and CPC series telescopes. It plugs into either the dedicated AUX port or the port intended for the hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron AUX Port Splitter introduce any signal delay or power issues?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the splitter is a passive parallel adapter. It is engineered by Celestron to ensure that both connected devices receive the necessary power and data signals to function correctly without interfering with one another.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I connect two hand controllers to the Celestron AUX Port Splitter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the splitter is not designed to operate two primary control devices simultaneously. It is intended for connecting a primary controller (like the NexStar+ hand controller) and a peripheral accessory (like StarSense, a WiFi module, or a focuser).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Celestron AUX Port Splitter difficult to install?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is extremely simple. Just unplug your hand controller, plug the AUX Port Splitter into that port on the mount, and then plug your hand controller and your second accessory into the two ports on the splitter. No tools or software are required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAUX Port Splitter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software \u0026amp; Drivers\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183089949,"sku":"CEL-93919","price":42.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-AUX-Port-Splitter-93919-1__41723.1594230511.1280.1280.jpg?v=1684338206"},{"product_id":"celestron-nexstar-hand-control-usb-az","title":"Celestron NexStar+ Hand Control USB, AZ","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDirect GoTo upgrade or replacement for Celestron alt-azimuth mounts\u003c\/li\u003e\n\u003cli\u003eAccess a vast database of celestial objects across 4 major catalogs\u003c\/li\u003e\n\u003cli\u003eFeatures Celestron's proprietary SkyAlign technology for fast, easy setup\u003c\/li\u003e\n\u003cli\u003eIntegrated USB port allows for direct firmware updates from a PC\u003c\/li\u003e\n\u003cli\u003eCovered by a 2-Year Celestron Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron NexStar+ Hand Control USB, AZ\u003c\/h2\u003e\n\u003cp\u003eThe Celestron NexStar+ Hand Control USB, AZ is the standard-issue GoTo controller for over 7 series of Celestron alt-azimuth telescopes, putting a vast database of celestial objects at your fingertips. This flash-upgradeable hand control features an integrated USB port for future-proofing your setup and is backed by a 2-Year Warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eGoTo Control for 7+ Celestron Telescope Series\u003c\/h3\u003e\n\u003cp\u003eThis NexStar+ AZ Hand Control is the official replacement and upgrade component for all current Celestron alt-azimuth (AZ) GoTo mounts. It is fully compatible with the NexStar SE, SLT, Evolution, CPC, CPC Deluxe, Astro Fi, and LCM telescope series, ensuring seamless integration and reliable pointing accuracy right out of the box.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eExplore 4 Major Catalogs with Automated Sky Tours\u003c\/h3\u003e\n\u003cp\u003eAt the push of a button, you can automatically slew your telescope to thousands of targets. The internal database includes objects from 4 major astronomical catalogs: the Messier, NGC, Caldwell, and SAO (SAO brightest stars). The planets and a curated list of the most popular deep-sky objects are also directly accessible.\u003c\/p\u003e\n\u003cp\u003eIf you're unsure what to observe, the built-in Tour Mode automatically generates a list of the best objects currently visible from your location. This feature makes it easy to discover new celestial sights like the Orion Nebula (M42) or the Hercules Cluster (M13) during any observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSimplified Alignment with SkyAlign Technology\u003c\/h3\u003e\n\u003cp\u003eGetting your telescope aligned is faster with Celestron's SkyAlign procedure built into the hand control. Simply point the telescope to any three bright celestial objects, and the NexStar+ system will identify them and model the night sky. This intuitive process eliminates the need to know the names of specific alignment stars.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Settings:\u003c\/strong\u003e Adjust the maximum slew speed to your preference and program slew limits to prevent the telescope from pointing below the horizon or hitting the tripod.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Interface:\u003c\/strong\u003e The red-backlit LCD screen and buttons preserve your night vision while providing clear, readable text and intuitive menu navigation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUSB Port and 2-Year Warranty for Long-Term Use\u003c\/h3\u003e\n\u003cp\u003eA key upgrade from older models, this hand control features a built-in USB-B port at its base. This modern connection allows you to update the hand control's firmware directly from your PC using the Celestron Firmware Manager (CFM) software, ensuring you always have access to the latest features and bug fixes. The entire unit is protected by a 2-Year Celestron factory warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eNexStar+ AZ vs. EQ Hand Control: Which One Do You Need?\u003c\/h3\u003e\n\u003cp\u003eCelestron produces two versions of the NexStar+ hand control, and choosing the correct one is critical for your mount's function. This AZ version is specifically for alt-azimuth mounts, while the EQ version is required for German equatorial mounts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ AZ (This Model):\u003c\/strong\u003e Designed for mounts that move in altitude (up\/down) and azimuth (left\/right). Its software includes alignment routines like SkyAlign and Solar System Align that are optimized for this geometry. It is the correct choice for fork-mounted SE and CPC scopes, and single-arm mounts like the SLT and Evolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ EQ:\u003c\/strong\u003e Required for German equatorial mounts like the Advanced VX or CGX. Its firmware includes polar alignment routines (like All-Star Polar Align) and understands how to track objects by moving primarily in Right Ascension. Using an AZ controller on an EQ mount will result in improper tracking and pointing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between this NexStar+ AZ USB hand control and the older, non-USB version?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary difference is the \u003cstrong\u003eUSB port\u003c\/strong\u003e. This modern version allows you to update the firmware directly with a standard USB cable connected to a PC. Older models had a serial port at the bottom that required a USB-to-RS232 serial adapter, which was often less reliable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this NexStar+ AZ Hand Control on my Celestron Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The Advanced VX is a German equatorial (EQ) mount and requires the \u003cstrong\u003eNexStar+ EQ Hand Control\u003c\/strong\u003e. This AZ version lacks the specific firmware and polar alignment routines necessary to operate an equatorial mount correctly. Using the wrong controller will lead to failed alignments and poor tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy old NexStar hand control failed. Is this a direct replacement for my NexStar 8SE?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is the correct and current factory replacement for the hand control that originally shipped with all NexStar SE series telescopes, including the 8SE. It is also the correct replacement for SLT, CPC, Evolution, Astro Fi, and LCM series telescopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the NexStar+ Hand Control USB?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo update, you will need a PC and a USB-A to USB-B cable (not included). Download and install the free Celestron Firmware Manager (CFM) software from Celestron's website. Connect the hand control to your PC, run CFM, and the software will automatically detect the device and download the latest firmware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the NexStar+ Hand Control work as a standalone device?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. The NexStar+ Hand Control is a self-contained computer. It plugs into your Celestron mount's \"Hand Control\" or \"HC\" port and manages all alignment, database, and GoTo functions without needing an external computer or WiFi connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of objects are in the NexStar+ Hand Control's \"Tour Mode\"?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Tour Mode generates a customized list of the best objects to view based on your current time, date, and location. It typically includes a mix of popular targets from various catalogs, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBright nebulae like the Orion Nebula (M42)\u003c\/li\u003e\n\u003cli\u003eGalaxies like the Andromeda Galaxy (M31)\u003c\/li\u003e\n\u003cli\u003eGlobular clusters like the Hercules Cluster (M13)\u003c\/li\u003e\n\u003cli\u003eOpen clusters like the Pleiades (M45)\u003c\/li\u003e\n\u003cli\u003eBright double stars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003eAccess to Messier, NGC, Caldwell, and SAO catalogs, plus planets and popular objects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlignment Procedures\u003c\/td\u003e\n\u003ctd\u003eSkyAlign, Auto 2-Star Align, 1-Star Align, 2-Star Align, Solar System Align\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Connection\u003c\/td\u003e\n\u003ctd\u003eUSB Type-B Port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Compatibility\u003c\/td\u003e\n\u003ctd\u003eNexStar SE Series, NexStar SLT Series, NexStar Evolution Series, CPC Series, CPC Deluxe Series, Astro Fi Series, LCM Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eFlash upgradeable via PC and Celestron Firmware Manager (CFM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Celestron NexStar+ Hand Control USB, AZ\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/93982-A.jpg?v=1684347712\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eNexStar+ Hand Control USB, AZ\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Nexstar_Plus_Hand_Controller_USB_Manual.pdf?v=1782186855\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron NexStar+ Hand Control USB Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron Firmware Manager (CFM)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183253789,"sku":"CEL-93981","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-NexStar-Hand-Control-USB-AZ-93981-1__59656.1594230512.1280.1280.jpg?v=1684338305"},{"product_id":"celestron-nexstar-hand-control-usb-eq","title":"Celestron NexStar+ Hand Control USB, EQ","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDirect replacement for Celestron equatorial GoTo mounts\u003c\/li\u003e\n\u003cli\u003eIntuitive menu system for object navigation\u003c\/li\u003e\n\u003cli\u003eFeatures Celestron's All-Star Polar Alignment routine\u003c\/li\u003e\n\u003cli\u003eUSB port allows for direct firmware updates from a PC\u003c\/li\u003e\n\u003cli\u003eCompatible with Advanced VX, CGEM II, CGX, and CGX-L mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron NexStar+ Hand Control USB, EQ\u003c\/h2\u003e\n\u003cp\u003eThe Celestron NexStar+ Hand Control for equatorial mounts is the brain of your GoTo system, providing direct access to a comprehensive database of celestial objects. This USB-equipped controller is the standard-issue accessory for all modern Celestron computerized equatorial mounts, including the Advanced VX, CGEM II, CGX, and CGX-L series. It incorporates Celestron's acclaimed All-Star Polar Alignment routine and allows for direct firmware updates, ensuring your mount's software remains current.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eGoTo Navigation: Accessing a Vast Celestial Catalog\u003c\/h3\u003e\n\u003cp\u003eThis controller puts a massive celestial database at your fingertips. You can automatically slew to objects in the Messier, NGC, and Caldwell catalogs, along with the planets and a curated list of the brightest stars and most popular deep-sky targets. If you're unsure what to observe, the built-in Tour Mode presents a selection of the best objects visible based on your current time and location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAlignment \u0026amp; Setup: All-Star Polar Alignment for Equatorial Mounts\u003c\/h3\u003e\n\u003cp\u003eThe NexStar+ EQ controller's standout feature is the All-Star Polar Alignment procedure. This powerful software routine allows you to achieve a precise polar alignment using any bright star, completely eliminating the need for a direct line of sight to Polaris. This is a critical advantage for observers with obstructed northern horizons. The controller also grants you control over essential settings like customizable maximum slew speeds and programmable slew limits to prevent the telescope from striking the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eConnectivity: USB-Upgradeable Firmware for Future Updates\u003c\/h3\u003e\n\u003cp\u003eEquipped with a USB port, this hand control moves beyond the older serial port models. The USB connection allows you to connect the controller directly to a PC and use the Celestron Firmware Manager (CFM) software. This ensures you can easily load the latest firmware, gaining access to new features, improved tracking algorithms, and bug fixes as Celestron releases them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eNexStar+ EQ vs. AZ: The Critical Difference in Mount Control\u003c\/h3\u003e\n\u003cp\u003eWhile they look identical, the EQ and AZ versions of the NexStar+ hand control are not interchangeable. The firmware is fundamentally different, and choosing the right one is essential for your mount to function.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ EQ (This Model):\u003c\/strong\u003e Contains the specific algorithms required to control an equatorial mount. It understands Right Ascension and Declination, and includes equatorial-specific functions like the All-Star Polar Alignment routine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ AZ:\u003c\/strong\u003e Designed for Alt-Azimuth mounts like the CPC, NexStar SE, and Evolution series. Its software is built around Altitude and Azimuth movements and contains alignment routines like SkyAlign. Using an AZ controller on an EQ mount will result in improper tracking and pointing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich Celestron mounts are compatible with this NexStar+ EQ hand control?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis hand control is the standard replacement for current Celestron computerized equatorial mounts. Compatibility is confirmed for the following series: \u003cstrong\u003eAdvanced VX, CGEM II, CGX, and CGX-L\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on my NexStar+ EQ hand control?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eUpdating is done via the built-in \u003cstrong\u003eUSB port\u003c\/strong\u003e. Connect the hand control to your computer using a USB A-to-Mini-B cable (not included) and run the \u003cstrong\u003eCelestron Firmware Manager (CFM)\u003c\/strong\u003e software, which is available for free download from Celestron's website. CFM will automatically detect your device and download the latest firmware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI can't see Polaris from my backyard. Can the NexStar+ EQ controller still help me polar align my CGX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. This is the primary purpose of Celestron's \u003cstrong\u003eAll-Star Polar Alignment\u003c\/strong\u003e routine, which is built into this hand control. After performing a standard two-star alignment, you can select any bright star from the controller's database to refine your polar alignment. The software will calculate the alignment error and guide you on how to adjust the mount's altitude and azimuth knobs for a precise setup, even with Polaris completely hidden.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this EQ hand control on a Celestron NexStar 8SE or other Alt-Az mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This hand control contains firmware written specifically for equatorial mounts. Using it on an Alt-Azimuth mount like a NexStar SE, CPC, or Evolution will cause it to fail to align and track correctly. You must use the AZ version of the NexStar+ hand control for those telescopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Tour Mode on the NexStar+ EQ controller work with my Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOnce your Advanced VX mount is aligned, you can select \"Tour Mode\" from the menu. The NexStar+ controller will use the current date, time, and your location to generate a curated list of the best objects currently visible in the sky. It will show you a mix of planets, double stars, nebulae, and galaxies, allowing your mount to automatically slew to each one. It's an excellent way to discover new targets during an observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this NexStar+ EQ hand control work wirelessly?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is a cabled hand control that plugs directly into the \"HC\" port on your mount. For wireless control, you would need a separate accessory like the Celestron SkyPortal WiFi Module.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003eAdvanced VX Series, CGEM II Series, CGX Series, CGX-L Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eNexStar+ Hand Control USB, EQ\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_NexStar_Plus_Hand_Control_Troubleshooting_Guide.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron NexStar Plus Hand Control Troubleshooting Guide\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/celestron-firmware-manager\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183352093,"sku":"CEL-93982","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-NexStar-Hand-Control-USB-EQ-93982-1__01514.1594230512.1280.1280.jpg?v=1684338311"},{"product_id":"celestron-skyportal-wifi-module","title":"Celestron SkyPortal WiFi Module","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eControl your Celestron computerized telescope wirelessly\u003c\/li\u003e\n\u003cli\u003eConnects to your mount's AUX port for power and data\u003c\/li\u003e\n\u003cli\u003eDual-band 2.4 GHz and 5 GHz WiFi operation for stable connections\u003c\/li\u003e\n\u003cli\u003eWeighs only 0.8oz (23g) and requires no external batteries\u003c\/li\u003e\n\u003cli\u003eWorks with the free SkyPortal app for iOS\/Android and CPWI software for PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron SkyPortal WiFi Module\u003c\/h2\u003e\n\u003cp\u003eThe Celestron SkyPortal WiFi Module replaces your hand controller with a completely wireless interface, weighing just 0.8oz (23g) and measuring 63.5mm x 50.8mm. This compact module plugs directly into your mount's AUX port for power and enables full GoTo control over 2.4 GHz or 5 GHz WiFi networks using the free SkyPortal app or CPWI software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUntethered GoTo: Full Wireless Control with SkyPortal and CPWI\u003c\/h3\u003e\n\u003cp\u003eOnce connected, your smartphone, tablet, or PC becomes the command center for your entire observing session. The SkyPortal app (iOS\/Android) and Celestron PWI software (Windows) give you complete control over alignment, object selection, and slewing. You can navigate a graphical planetarium and command your telescope to move to any object with a single tap, eliminating the cord wrap and dependency of a physical hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDual-Band 2.4\/5GHz WiFi: Direct Connect \u0026amp; Access Point Modes\u003c\/h3\u003e\n\u003cp\u003eThe SkyPortal module offers two distinct connection methods to adapt to your observing location. In the field, Direct Connect Mode creates its own local WiFi network, allowing you to connect your device directly to the module without any other hardware. At home, Access Point Mode connects the module to your existing home WiFi network, so you can control the telescope while maintaining full internet access for browsing charts or uploading data.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Band Operation:\u003c\/strong\u003e With support for both 2.4 GHz and 5 GHz bands, you can select the frequency with the least interference, ensuring a more stable and responsive connection, especially at crowded star parties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode Switch:\u003c\/strong\u003e A physical switch on the module's side allows you to instantly select between Direct Connect and Access Point modes before powering on your mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LEDs:\u003c\/strong\u003e Onboard LEDs provide immediate visual feedback on the connection mode, network status, and data activity, simplifying troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e0.8oz Design: AUX Port Power and Wide Mount Compatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered for simplicity, the SkyPortal WiFi Module is a true plug-and-play accessory. It draws all necessary power directly from the mount's AUX port, so there are no batteries to charge or replace. At a mere 0.8oz (23g), its addition to the optical train is negligible and requires no rebalancing. The module is compatible with a vast range of modern Celestron computerized mounts, from the NexStar SE\/SLT series to the CGX and CPC lines, installing in just seconds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the advantage of using the SkyPortal WiFi Module over a standard hand controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe SkyPortal WiFi Module provides a graphical, intuitive interface for controlling your telescope via a smartphone or PC. This allows you to tap on objects within a planetarium app to slew the telescope, which is often faster and more engaging than scrolling through menus on a text-based hand controller. It also eliminates cord wrap and allows you to control the mount from a comfortable distance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need an internet connection to use the Celestron SkyPortal WiFi Module in the field?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. Using \u003cstrong\u003eDirect Connect Mode\u003c\/strong\u003e, the module creates its own WiFi hotspot. You connect your phone or tablet directly to this network. This is the standard mode for use at remote dark-sky sites where no other networks are available.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I use Access Point Mode with the SkyPortal WiFi Module?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eAccess Point Mode\u003c\/strong\u003e is ideal for backyard observing. It connects the module to your home WiFi network, allowing your phone or tablet to control the telescope while staying connected to the internet. This lets you use other astronomy apps, check weather updates, or browse online star atlases without disconnecting from your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SkyPortal WiFi Module perform at a crowded star party with an Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe module's dual-band 2.4 GHz and 5 GHz capability is a significant advantage in crowded environments. If the common 2.4 GHz band is saturated with signals from other devices, you can switch the SkyPortal module to the 5 GHz band, which is often less congested, ensuring a more stable and reliable connection to your Advanced VX mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the SkyPortal WiFi Module work with my older NexStar 8 GPS telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the SkyPortal WiFi Module is not compatible with early generation GoTo mounts like the NexStar GPS or Ultima 2000 series. It is designed for modern Celestron mounts that feature an AUX port, such as the NexStar SE, Evolution, CPC, AVX, and CGX series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron SkyPortal WiFi Module require its own battery?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, it is powered entirely through the \u003cstrong\u003eAUX port\u003c\/strong\u003e on your Celestron computerized mount. You do not need any external power supplies, cables, or batteries for the module itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eCelestron computerized mount AUX port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Source\u003c\/td\u003e\n\u003ctd\u003eAUX port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Modes\u003c\/td\u003e\n\u003ctd\u003eDirect Connect Mode, Access Point Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiFi\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz or 5 GHz operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicators\u003c\/td\u003e\n\u003ctd\u003eStatus LEDs for Mode, Connection, and Activity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e63.5mm x 50.8mm x 33.02mm (2.5\" x 2\" x 1.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8oz (23g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron SkyPortal WiFi Module\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183384861,"sku":"CEL-93973","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-SkyPortal-WiFi-Module-93973-1__40221.1594230513.1280.1280.jpg?v=1684338316"},{"product_id":"celestron-skysync-gps-accessory","title":"Celestron SkySync GPS Accessory","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAutomatically provides time, date, and location data from GPS satellites\u003c\/li\u003e\n\u003cli\u003eConnects to your Celestron telescope's hand control or AUX port\u003c\/li\u003e\n\u003cli\u003eSimplifies and accelerates GoTo alignment accuracy\u003c\/li\u003e\n\u003cli\u003eIncludes mounting straps for secure attachment to a tripod leg\u003c\/li\u003e\n\u003cli\u003eCovered by a 2-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron SkySync GPS Accessory\u003c\/h2\u003e\n\u003cp\u003eThe Celestron SkySync GPS Accessory adds crucial time, date, and location automation to your Celestron computerized telescope, backed by a 2-Year Warranty to ensure your alignment process is fast and accurate for years to come.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAutomated Alignment Data: Your Mount's Missing GPS Link\u003c\/h3\u003e\n\u003cp\u003eThe single most critical step for accurate GoTo performance is providing the mount with a precise time, date, and location. The SkySync automates this entirely by linking your telescope directly to the Global Positioning System, eliminating the need to manually enter information from a watch or smartphone in the dark. This direct data feed makes every alignment faster and more reliable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePlug-and-Play Integration with a 2-Year Warranty\u003c\/h3\u003e\n\u003cp\u003eDesigned for seamless operation, the SkySync GPS unit plugs directly into your telescope's hand control or an available AUX port on the mount base. It draws power directly from the mount, requiring no separate batteries. With the included straps, the module secures neatly to a tripod leg, keeping it out of the way while maintaining a clear view of the sky, all protected by a Celestron 2-Year Warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSkySync vs. Manual Entry: Why GPS Accuracy Matters\u003c\/h3\u003e\n\u003cp\u003eWhile a smartphone can provide location data, the SkySync offers key advantages for serious observation. It's a dedicated device that doesn't require you to check a bright screen, preserving your night vision. More importantly, it provides a direct, satellite-accurate data stream that is always up-to-date, removing any chance of human error when entering coordinates or accounting for Daylight Saving Time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire and Forget:\u003c\/strong\u003e Once connected, the SkySync works automatically every time you power on your telescope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreserves Night Vision:\u003c\/strong\u003e No need to consult a bright phone screen during your setup routine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffline Reliability:\u003c\/strong\u003e Works anywhere in the world, even in remote dark-sky sites with no cellular service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SkySync GPS Accessory improve my GoTo alignment?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAccurate GoTo slewing and tracking depend on the mount knowing its precise location, the date, and the exact time. The SkySync GPS Accessory automates this by pulling data directly from GPS satellites. This eliminates typos and incorrect time entries, which are common sources of alignment failure, resulting in significantly more accurate GoTo performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the SkySync GPS Accessory compatible with all Celestron telescopes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe SkySync is designed to work with Celestron's computerized telescopes. It connects via the AUX port on the mount or through the port on the bottom of the hand controller (like the NexStar+). If your telescope has a computerized GoTo mount, the SkySync is the standard GPS accessory for it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhere do I plug in the Celestron SkySync?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou can plug the SkySync into any open Auxiliary (AUX) port on your Celestron mount's drive base. If no AUX ports are free, you can also plug it into the port on the base of your NexStar+ hand control. The included straps then allow you to secure the module to a tripod leg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the SkySync need batteries or a separate power source?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the SkySync GPS Accessory is powered directly by the telescope's mount through the AUX port connection. It does not require any separate batteries or power cables.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SkySync help with tracking planets like Jupiter on my Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor an equatorial mount like the Advanced VX, a precise initial alignment is critical for accurate, long-term tracking. By providing satellite-accurate time and location data, the SkySync ensures your initial All-Star Polar Alignment or 2-Star Align is built on a perfect foundation. This results in Jupiter (or any other object) staying centered in the eyepiece for longer periods, which is especially important for high-magnification planetary imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm at a dark sky site with no cell service. Will the SkySync still provide an accurate location for aligning my NexStar 8SE?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. This is a primary advantage of the SkySync. It communicates directly with orbiting GPS satellites and does not rely on cellular or Wi-Fi networks. This guarantees that your NexStar 8SE will get a fast, accurate location lock, even at the most remote observing sites.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Celestron SkySync GPS Accessory\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/93969-1-800x800_1.webp?v=1708722420\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eSkySync GPS Accessory\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Mounting Straps for SkySync GPS\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/%20straps-placeholder.jpg\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMounting Straps\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software \u0026amp; Manuals\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183417629,"sku":"CEL-93969","price":271.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-SkySync-GPS-Accessory-93969-1__63914.1594230513.1280.1280.jpg?v=1684338318"},{"product_id":"celestron-starsense-autoalign","title":"Celestron StarSense AutoAlign","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eReplaces manual alignment with automated plate-solving\u003c\/li\u003e\n\u003cli\u003e1.2 Megapixel CMOS sensor with 3.75µm pixels\u003c\/li\u003e\n\u003cli\u003eFast f\/2, 20mm 2-element objective lens\u003c\/li\u003e\n\u003cli\u003eIncludes dedicated hand controller with a 45,178 object database\u003c\/li\u003e\n\u003cli\u003eAdvanced mount modeling with up to 10 calibration stars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron StarSense AutoAlign\u003c\/h2\u003e\n\u003cp\u003eThe Celestron StarSense AutoAlign automates your telescope's alignment using its 1.2 Megapixel Aptina CMOS sensor and a 1280 x 960 pixel array to capture images of the sky. Its fast, 2-element 20mm f\/2 lens gathers enough light for the onboard 32-bit processor to plate-solve your location in minutes. The included hand controller gives you full GoTo access to a 45,178 object database, completely replacing the time-consuming manual 2-star alignment process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e3-Minute Plate-Solving with a 1.2MP Camera\u003c\/h3\u003e\n\u003cp\u003eStarSense eliminates the most tedious part of setting up a computerized telescope. Instead of manually finding and centering alignment stars, you simply attach the StarSense camera, which uses its 1.2MP sensor and 3.75μm pixels to take a series of images. In about three minutes, the system automatically identifies star patterns, matches them against its internal database, and calculates the precise pointing direction of your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 45,178-Object StarSense Controller\u003c\/h3\u003e\n\u003cp\u003eThis accessory replaces your standard NexStar hand control with the dedicated StarSense controller. It features a red backlit 4-line LCD for preserving night vision and provides access to a comprehensive database of 45,178 celestial objects. Once aligned, the \"Sky Tour\" feature automatically slews your telescope to the best planets, galaxies, and nebulae currently visible from your location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e10-Star Calibration for Imaging Accuracy\u003c\/h3\u003e\n\u003cp\u003eFor astrophotographers who demand the highest pointing accuracy, StarSense replaces expensive PC-based mount modeling software. After the initial auto-alignment, you can add up to 10 additional calibration stars across the sky. This builds a sophisticated pointing model that corrects for mechanical errors, ensuring your target is perfectly centered in your camera's field of view, from horizon to horizon.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eStarSense AutoAlign vs. Manual Alignment: Beyond the 2-Star Method\u003c\/h3\u003e\n\u003cp\u003eA traditional 2-star alignment requires you to know the names of bright stars, find them in a finderscope, and center them in an eyepiece. StarSense requires no prior knowledge and is typically more accurate. Unlike PC-based plate-solving, StarSense is a completely self-contained system that requires no laptop, external software, or internet connection at the telescope, making it a faster and more portable solution for achieving perfect GoTo performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Celestron StarSense AutoAlign work?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eCelestron StarSense AutoAlign\u003c\/strong\u003e uses a small digital camera with a \u003cstrong\u003e1.2MP CMOS sensor\u003c\/strong\u003e to take pictures of the night sky. Its internal \u003cstrong\u003e32-bit processor\u003c\/strong\u003e analyzes these images, identifies the star patterns, and compares them to its built-in sky map. This process, called plate-solving, allows it to calculate the exact direction the telescope is pointing and perform a highly accurate GoTo alignment automatically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat telescopes are compatible with the StarSense AutoAlign?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is designed to work with most modern computerized Celestron telescopes. It connects directly to the mount's \u003cstrong\u003eAuxiliary Port\u003c\/strong\u003e, replacing the standard NexStar+ hand control. It is compatible with nearly all Celestron GoTo mounts, including NexStar SE, CPC, CGEM, and Advanced VX series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the StarSense AutoAlign for astrophotography?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is an excellent tool for astrophotographers. Its primary benefit is providing a very accurate initial GoTo alignment. For advanced users, the ability to build a pointing model with up to 10 calibration stars ensures that faint deep-sky objects are placed precisely on your imaging sensor, saving valuable time when framing your target.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the StarSense AutoAlign need a clear view of the whole sky?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, it does not need a full 360° view. The \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is robust enough to perform an alignment even with partially obstructed skies, such as from a backyard with trees or houses. It slews to different areas of the sky, and as long as it can capture enough clear patches to identify star patterns, it will successfully complete the alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the StarSense AutoAlign's pointing accuracy compare to a manual 2-star alignment for finding faint objects like the Whirlpool Galaxy (M51)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is typically more accurate than a manual 2-star alignment because it uses a camera to precisely measure star positions, removing the human error of centering by eye. For a faint target like the Whirlpool Galaxy (M51), this increased accuracy means the object is more likely to be in the field of view of a low-power eyepiece on the first try, saving you from having to hunt for it manually.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the StarSense AutoAlign work from my light-polluted backyard on a target like the Hercules Cluster (M13)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e camera and software are sensitive enough to detect the necessary alignment stars even through moderate light pollution. It can successfully align your telescope from most suburban locations, allowing you to easily find bright globular clusters like the Hercules Cluster (M13) and other showpiece objects without issue.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImaging Sensor\u003c\/td\u003e\n\u003ctd\u003eAptina MT9M034 1.2 Megapixel CMOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePixel Array\u003c\/td\u003e\n\u003ctd\u003e1280 x 960\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePixel Size\u003c\/td\u003e\n\u003ctd\u003e3.75μm x 3.75μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObjective Lens\u003c\/td\u003e\n\u003ctd\u003e2-Element 20mm (0.78\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocal Length\u003c\/td\u003e\n\u003ctd\u003e40mm (1.57\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocal Ratio\u003c\/td\u003e\n\u003ctd\u003ef\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e45,178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003eSTMicro ARM 32-bit Cortex™-M3 CPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Board\u003c\/td\u003e\n\u003ctd\u003e32-bit processor with embedded Linux Operating System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLCD\u003c\/td\u003e\n\u003ctd\u003eRed backlit 4 Line LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Port\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Port\u003c\/td\u003e\n\u003ctd\u003eConnects to Celestron telescopes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Port\u003c\/td\u003e\n\u003ctd\u003ePC connectable for software\/firmware upgrades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eFully upgradable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_StarSense_AutoAlign_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron StarSense AutoAlign Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/celestron-firmware-manager\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183483165,"sku":"CEL-94005","price":666.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-StarSense-AutoAlign-94005-1__39047.1594230514.1280.1280.jpg?v=1684338324"},{"product_id":"celestron-starsense-autoalign-for-sky-watcher-mounts","title":"Celestron StarSense AutoAlign for Sky-Watcher Mounts","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAutomatically aligns your Sky-Watcher mount in minutes\u003c\/li\u003e\n\u003cli\u003eReplaces manual star alignment with advanced plate-solving technology\u003c\/li\u003e\n\u003cli\u003eCompatible with HEQ5, EQ6, AZ-EQ5, AZ-EQ6, EQ8 and other SynScan mounts\u003c\/li\u003e\n\u003cli\u003eIncludes StarSense camera, hand control, and interface box\u003c\/li\u003e\n\u003cli\u003e2-Year Celestron Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron StarSense AutoAlign for Sky-Watcher Mounts\u003c\/h2\u003e\n\u003cp\u003eThe Celestron StarSense AutoAlign for Sky-Watcher Mounts brings Celestron's revolutionary, hands-free alignment technology to a wide range of popular Sky-Watcher platforms, including the HEQ5, EQ6, AZ-EQ5, AZ-EQ6, and EQ8 mounts. This complete kit, which includes the StarSense camera, specialized hand controller, and an interface box, automates your entire alignment process, getting you from setup to observing in just a few minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e3-Minute Alignment: Celestron's StarSense Plate-Solving for Sky-Watcher\u003c\/h3\u003e\n\u003cp\u003eStarSense technology eliminates the need to manually identify and center alignment stars. The included camera takes a series of images of the night sky, automatically plate-solving them against its internal database to calculate the exact pointing direction of your telescope. This process is faster and more accurate than traditional 2-star or 3-star manual alignments, saving valuable time at the beginning of an observing or imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePlug-and-Play with 6+ Sky-Watcher Mounts\u003c\/h3\u003e\n\u003cp\u003eThis version of StarSense is engineered specifically for seamless integration with Sky-Watcher's SynScan ecosystem. The hardware is designed for a simple, direct connection: the StarSense camera and hand control connect to the interface box, which then plugs directly into your mount's hand control port. There is no complex wiring or software configuration required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Mount Compatibility:\u003c\/strong\u003e Full support for HEQ5, EQ6, AZ-EQ5, AZ-EQ6, EQ8, and any other mount using the Sky-Watcher SynScan control system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-in-One Kit:\u003c\/strong\u003e The package includes the camera, hand control, interface box, and mounting brackets for a complete conversion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplified Setup:\u003c\/strong\u003e Once connected, the StarSense hand control takes over, guiding you through the quick, automated alignment procedure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the StarSense AutoAlign for Sky-Watcher work if my view is partially blocked by trees?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe StarSense technology is robust enough to handle partially obstructed skies. It takes multiple images across different parts of the sky. As long as it can \"see\" enough stars in a few of these regions to plate-solve, it can build an accurate pointing model and complete the alignment successfully.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the StarSense AutoAlign difficult to install on my Sky-Watcher EQ6-R Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the installation is straightforward. The kit includes both large and small mounting brackets designed to fit a wide variety of optical tubes. You simply attach the bracket and camera to your telescope, plug the camera and StarSense hand control into the interface box, and connect the interface box to the mount's hand control port. The system is designed for a plug-and-play experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use my original Sky-Watcher SynScan hand controller after installing the StarSense AutoAlign?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the included StarSense hand control must be used to operate the mount once the StarSense AutoAlign is connected. It contains the necessary software to run the alignment camera and control the mount. It replaces your standard SynScan controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the StarSense AutoAlign improve my GoTo accuracy for imaging Jupiter with an 8\" Newtonian on an HEQ5 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. By using plate-solving, the StarSense creates a more precise pointing model of the sky than a typical two or three-star manual alignment. This results in significantly better GoTo accuracy, ensuring that objects like Jupiter will be centered in the eyepiece or on your imaging sensor on the first try.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the StarSense AutoAlign for Sky-Watcher require a PC to function?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the entire system is self-contained. The StarSense camera, hand control, and interface box manage the entire alignment process without the need for an external computer, laptop, or internet connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main benefit of the StarSense AutoAlign over my mount's standard alignment routine?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary benefits are speed and accuracy. StarSense automates the entire process, removing the need for you to know the names of stars or spend time carefully centering them. It performs a sophisticated alignment in minutes, allowing you to spend more of your time observing or imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003eSky-Watcher HEQ5, EQ6, AZ-EQ5, AZ-EQ6, EQ8, and other AZ SynScan compatible mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"StarSense Hand Control\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eStarSense Hand Control\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"StarSense Camera with mounting brackets\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eStarSense Camera\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003ewith large and small mounting brackets\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Interface Box for StarSense\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eInterface Box\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Cable, camera to mount\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCamera to Mount Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_StarSense_AutoAlign_for_Sky-Watcher_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron StarSense for Sky-Watcher Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183548701,"sku":"CEL-94006","price":916.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-StarSense-AutoAlign-for-Sky-Watcher-Mounts-94006-1__19255.1594230515.1280.1280.jpg?v=1684338329"},{"product_id":"celestron-starsense-hand-control-usb","title":"Celestron StarSense Hand Control USB","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUnlocks StarSense AutoAlign accessory functionality\u003c\/li\u003e\n\u003cli\u003e40,000-object database with detailed information\u003c\/li\u003e\n\u003cli\u003eDirect PC connection via Mini-USB for firmware updates and software control\u003c\/li\u003e\n\u003cli\u003eDual-line, 16-character LCD screen with adjustable red backlighting\u003c\/li\u003e\n\u003cli\u003e2-Year Celestron Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron StarSense Hand Control USB\u003c\/h2\u003e\n\u003cp\u003eThe Celestron StarSense Hand Control USB is the required controller for the StarSense AutoAlign accessory, unlocking the fastest and easiest alignment process available for your Celestron computerized mount. This controller features a 40,000-object database and a clear dual-line, 16-character LCD screen for navigating the night sky. With its built-in Mini-USB port, this updated model allows for direct connection to a PC for fast firmware updates and optional telescope control with third-party software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 40,000-Object Database for StarSense AutoAlign\u003c\/h3\u003e\n\u003cp\u003eWhile the StarSense AutoAlign camera handles the sky recognition, this hand control is the brain of the operation. It contains the 40,000-object database that the system uses to identify stars and slew to your desired targets. The intuitive menu system makes it simple to select from catalogs of galaxies, nebulae, star clusters, and planets, turning your telescope into a powerful tool for discovery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePC Control via Mini-USB for 2-Minute Firmware Updates\u003c\/h3\u003e\n\u003cp\u003eThis version of the StarSense Hand Control eliminates the need for older serial-to-USB adapters. A direct Mini-USB port provides a stable, modern connection to your PC. This makes firmware updates from Celestron's website a straightforward process and opens up the ability to control your telescope directly from popular planetarium software for a fully integrated observing experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eStarSense Hand Control vs. Standard NexStar+ Hand Controller\u003c\/h3\u003e\n\u003cp\u003eThe primary difference is system compatibility. The StarSense Hand Control is the only controller that works with the StarSense AutoAlign accessory. In contrast, the standard NexStar+ Hand Controller that comes with most Celestron mounts cannot operate the StarSense camera. This StarSense model is a required upgrade to enable automatic alignment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarSense Hand Control:\u003c\/strong\u003e Required for StarSense AutoAlign. Has a Mini-USB port for modern PC connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard NexStar+ Hand Controller:\u003c\/strong\u003e Cannot operate StarSense. Older versions may require a serial port adapter for PC connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMount Compatibility: Check Your Setup for Over 15 Celestron Series\u003c\/h3\u003e\n\u003cp\u003eIt is critical to understand that this hand control will not function without the StarSense AutoAlign accessory (sold separately) plugged into your mount's AUX port. It is not a standalone upgrade. The only exception is the SkyProdigy series, which has StarSense technology built-in. Before purchasing, confirm your mount is on the compatibility list, which includes the Advanced VX, CGEM II, CGX, CPC, NexStar Evolution, SE, and SLT series, among others.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need the StarSense AutoAlign camera for this StarSense Hand Control to work?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes, absolutely.\u003c\/strong\u003e This hand control is specifically designed to operate the StarSense AutoAlign accessory. It will not function as a standalone controller on a compatible mount without the StarSense camera also connected. The only exception is the SkyProdigy series of telescopes, which already have the StarSense technology integrated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the StarSense Hand Control over the standard NexStar+ controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe sole purpose of the StarSense Hand Control is to enable the use of the \u003cstrong\u003eStarSense AutoAlign accessory\u003c\/strong\u003e. This accessory automates your telescope's alignment process, typically in under three minutes. The standard NexStar+ controller cannot communicate with the StarSense accessory. This hand control also features a direct Mini-USB port for easier firmware updates and PC control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the StarSense Hand Control to control my Advanced VX mount with planetarium software?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Mini-USB port on the bottom of the StarSense Hand Control allows you to connect it directly to a computer. With the correct drivers and ASCOM platform installed, you can then control your Advanced VX mount using popular software like Stellarium, Cartes du Ciel, or Starry Night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the StarSense Hand Control USB?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou can update the firmware by connecting the hand control to your PC using a Mini-USB cable (not included). Download the Celestron Firmware Manager (CFM) software from the Celestron website. CFM will automatically detect the hand control and download the latest firmware updates for both the controller and any connected accessories like the StarSense camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this StarSense Hand Control work with my older Celestron NexStar GPS series telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the StarSense Hand Control and the StarSense AutoAlign accessory are not compatible with older mounts like the NexStar GPS, NexStar i Series, or Ultima 2000. Please refer to the official compatibility list to ensure your mount is supported.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I have a SkyProdigy telescope, do I need to buy this hand control?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe SkyProdigy series already includes StarSense technology and comes with a StarSense-enabled hand controller. This product would serve as a direct replacement if your original SkyProdigy hand controller is lost or damaged. You do not need the separate StarSense AutoAlign accessory with a SkyProdigy telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e40,000+ objects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eDual line, 16-character LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBacklighting\u003c\/td\u003e\n\u003ctd\u003eAdjustable, Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Connection\u003c\/td\u003e\n\u003ctd\u003eMini-USB Port (cable not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eFlash Upgradeable via Celestron Firmware Manager\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Requirement\u003c\/td\u003e\n\u003ctd\u003eStarSense AutoAlign Accessory (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eStarSense Hand Control with USB\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"DAV-subtext\"\u003e\n\u003cp\u003eNote: A Mini-USB cable is required for PC connection and firmware updates but is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_StarSense_Accessory_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload StarSense Accessory Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Nexstar_Plus_Hand_Controller_USB_Manual.pdf?v=1782186855\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload NexStar+ USB Hand Control Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron Drivers \u0026amp; Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product is covered by Celestron's 2-Year Limited Warranty. For complete warranty information, please visit the \u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron Warranty Policy\u003c\/a\u003e page.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183581469,"sku":"CEL-93999","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-StarSense-Hand-Control-USB-93999-1__52294.1594230515.1280.1280.jpg?v=1684338331"},{"product_id":"celestron-astromaster-powerseeker-motor-drive","title":"Celestron AstroMaster\/PowerSeeker Motor Drive","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds Right Ascension tracking to AstroMaster and PowerSeeker equatorial mounts\u003c\/li\u003e\n\u003cli\u003eCompensates for Earth's rotation to keep objects centered\u003c\/li\u003e\n\u003cli\u003eVariable speed control to track celestial objects at their specific rates\u003c\/li\u003e\n\u003cli\u003eNorth\/South switch allows for use in either hemisphere\u003c\/li\u003e\n\u003cli\u003ePowered by a single 9V battery for a wireless setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron AstroMaster\/PowerSeeker Motor Drive\u003c\/h2\u003e\n\u003cp\u003eThe Celestron AstroMaster\/PowerSeeker Motor Drive adds precise, hands-free tracking to your telescope with a 228:1 gear ratio and a 9.5 RPH slew speed. This single-axis drive automates right ascension adjustments, compensating for Earth's rotation to keep celestial objects perfectly centered in your eyepiece for extended periods.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAutomated 9.5 RPH Tracking for CG-2 and CG-3 Mounts\u003c\/h3\u003e\n\u003cp\u003eThis RA motor drive is specifically designed for Celestron's AstroMaster and PowerSeeker telescopes using CG-2 or CG-3 equatorial mounts. Once your mount is polar aligned, the motor takes over, slewing at 9.5 RPH to precisely match the sky's east-to-west movement. This eliminates the need for constant manual adjustments, transforming your observing session from a chase into a steady, detailed study of your target.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eHemisphere Switching and Variable-Speed Control\u003c\/h3\u003e\n\u003cp\u003eEngineered for global use, the motor drive features a simple North\/South (N\/S) switch that reverses the motor's direction for operation in either hemisphere. A dedicated \"Speed Rate Regulator\" knob allows you to fine-tune the tracking rate. This is critical for accurately following objects like the Moon and planets, which move at slightly different speeds than the background stars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSimple 9V Battery-Powered Installation\u003c\/h3\u003e\n\u003cp\u003eThe drive installs easily onto your mount and runs on a single 9V battery, eliminating any risk of cord wrap or the need for an external power supply. This self-contained design keeps your setup clean and portable. With the motor running, you only need to make occasional declination adjustments to hold an object in the field of view for long, uninterrupted observations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the AstroMaster\/PowerSeeker Motor Drive work with my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis motor drive is designed exclusively for Celestron telescopes that use a \u003cstrong\u003eCG-2 or CG-3 equatorial mount\u003c\/strong\u003e. This includes most models in the AstroMaster and PowerSeeker series. It is not compatible with alt-azimuth (AZ) mounts or other manufacturers' equatorial mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the AstroMaster\/PowerSeeker Motor Drive help with observing planets like Jupiter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhen observing a planet like Jupiter at high magnification with a PowerSeeker 127EQ, it will drift out of the eyepiece in under a minute. The motor drive corrects for this by tracking Jupiter's movement, keeping it centered. You can use the speed regulator to precisely match Jupiter's specific rate of motion across the sky, allowing for much longer, more detailed views of its cloud bands and moons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I still need to polar align my mount with the AstroMaster\/PowerSeeker Motor Drive installed?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. Proper polar alignment is essential for the motor drive to work correctly. The drive only moves the telescope in Right Ascension. If the mount is not accurately aligned with the celestial pole, the object will still drift out of the eyepiece in declination.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this AstroMaster\/PowerSeeker Motor Drive for astrophotography?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis drive is excellent for keeping objects in the field for visual observation and can enable short-exposure planetary or lunar imaging with a webcam-style camera. However, for long-exposure deep-sky astrophotography, a more robust mount with dual-axis drives and autoguiding capabilities is recommended for higher precision.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow long does the 9V battery last in the AstroMaster\/PowerSeeker Motor Drive?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eBattery life can vary based on temperature and the quality of the battery used. A fresh, high-quality 9V alkaline battery will typically provide several nights of observing. It's always a good practice to carry a spare battery with you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I change the speed for tracking the Moon versus stars with the AstroMaster\/PowerSeeker Motor Drive?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Moon moves at a different rate than distant stars. To adjust, simply turn the \"Speed Rate Regulator\" knob located on the motor drive. You can slightly speed up or slow down the motor until the Moon remains centered in your eyepiece without drifting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear Ratio\u003c\/td\u003e\n\u003ctd\u003e228:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew Speed\u003c\/td\u003e\n\u003ctd\u003e9.5 RPH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAstroMaster\/PowerSeeker Motor Drive\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Astromaster_Motor_Drive_Manual.pdf?v=1774383600\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron AstroMaster Motor Drive Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184367901,"sku":"CEL-93514","price":72.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-AstroMaster-PowerSeeker-Motor-Drive-93514-1__55799.1594230526.1280.1280.jpg?v=1684338257"},{"product_id":"celestron-dual-axis-motor-drive-for-cg-4-mounts","title":"Celestron Dual-Axis Motor Drive for CG-4 Mounts","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds Right Ascension tracking to follow celestial objects\u003c\/li\u003e\n\u003cli\u003eIncludes a Declination motor for 4-way direction control\u003c\/li\u003e\n\u003cli\u003eVariable speed hand controller with 2x, 4x, and 8x rates\u003c\/li\u003e\n\u003cli\u003ePowered by four D-cell batteries for use anywhere\u003c\/li\u003e\n\u003cli\u003eCompatible with both Northern and Southern Hemispheres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron Dual-Axis Motor Drive for CG-4 Mounts\u003c\/h2\u003e\n\u003cp\u003eUpgrade your Celestron CG-4 mount with the Celestron Dual-Axis Motor Drive, adding essential tracking and 4-direction correction capabilities. The right ascension motor automates tracking to keep objects centered, while the declination motor enables precise adjustments at 2x, 4x, or 8x sidereal speed via the drive corrector hand controller. This system is powered by four D-cell batteries and operates on a 6 Volt input, making it a fully self-contained solution for visual astronomy and long-exposure astrophotography.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDual-Axis Motors for Automated Tracking and Guiding\u003c\/h3\u003e\n\u003cp\u003eThis drive system transforms your manual CG-4 mount into a capable tracking platform. The Right Ascension (RA) motor compensates for Earth's rotation, keeping stars, planets, and nebulae from drifting out of your eyepiece. The addition of the Declination (Dec) motor provides the crucial four-direction control needed for precise framing and guided astrophotography, allowing you to make the fine corrections necessary to capture sharp, point-like stars in your images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e4-Way Control with 2x, 4x, and 8x Speeds\u003c\/h3\u003e\n\u003cp\u003eThe included drive corrector hand controller puts complete control at your fingertips. You can effortlessly adjust the telescope's pointing in any of the four cardinal directions (north, south, east, west). A simple switch lets you select between three different speeds to suit your task.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x Sidereal Rate:\u003c\/strong\u003e This slow speed is designed for making subtle guiding corrections during astrophotography, ensuring your guide star stays locked in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x Sidereal Rate:\u003c\/strong\u003e Ideal for accurately centering an object within the high-magnification field of view of your eyepiece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x Sidereal Rate:\u003c\/strong\u003e A faster slewing speed used for quickly centering objects in the wider field of your finderscope or a low-power eyepiece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSelf-Contained 6V Battery Power for Field Use\u003c\/h3\u003e\n\u003cp\u003eDesigned for portability, the Celestron Dual-Axis Motor Drive runs on four D-cell batteries housed in a dedicated power pack, eliminating the need for an external 12V power source. This makes it an ideal upgrade for astronomers who observe away from home. A simple \"N\/Off\/S\" switch on the hand controller reverses the motor's direction, allowing for correct tracking in either the Northern or Southern Hemisphere. It is critical to note this is a 6 Volt system and must not be connected to a 12V power source like a Celestron PowerTank.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main benefit of installing the Dual-Axis Motor Drive on my CG-4 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary benefit is automated tracking. The Right Ascension motor turns your telescope at the same rate as the Earth's rotation, which keeps celestial objects centered in your eyepiece without constant manual adjustment. This is essential for relaxed visual observing and a requirement for astrophotography.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I do astrophotography with the Celestron Dual-Axis Motor Drive?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This drive system provides both RA tracking and Dec correction capabilities, which are necessary for guided long-exposure astrophotography. The 2x speed setting on the hand controller is specifically for making the fine adjustments needed to keep a guide star centered.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I power the CG-4 Motor Drive in the field?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe system is powered by four D-cell batteries, which fit into the included power pack. This makes it a portable, self-contained unit. \u003cstrong\u003eImportant:\u003c\/strong\u003e This is a 6V system and cannot be used with 12V power sources like car batteries or a Celestron PowerTank.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Celestron Dual-Axis Motor Drive difficult to install on the CG-4 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward for most users. The package includes all necessary mounting brackets, hardware, and a clutch mechanism. You will attach the two motors to the corresponding axes on the CG-4 mount and connect them to the hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-Q\"\u003eHow does this motor drive help when trying to sketch Jupiter with a 6\" Newtonian on the CG-4 mount?\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAt the high magnifications needed for planetary detail, objects like Jupiter drift out of the field of view very quickly. The Celestron Dual-Axis Motor Drive's RA motor will keep Jupiter perfectly centered, allowing you to focus entirely on observing and sketching its cloud bands and moons without interruption.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the CG-4 Motor Drive in both Australia and the United States?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The hand controller has a \"N\/Off\/S\" switch. Simply set it to \"N\" for the Northern Hemisphere (like the US) or \"S\" for the Southern Hemisphere (like Australia) to ensure the motor tracks in the correct direction for your location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Compatibility\u003c\/td\u003e\n\u003ctd\u003eCelestron CG-4 Equatorial Mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Control\u003c\/td\u003e\n\u003ctd\u003eRA and Dec motors included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHand Controller\u003c\/td\u003e\n\u003ctd\u003eDrive corrector with 4-way control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew Speeds\u003c\/td\u003e\n\u003ctd\u003e2x, 4x, and 8x Sidereal Rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirement\u003c\/td\u003e\n\u003ctd\u003e6V DC (from four D-cell batteries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHemisphere Support\u003c\/td\u003e\n\u003ctd\u003eSwitchable for Northern or Southern Hemisphere\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eRight Ascension (RA) Motor\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDeclination (Dec) Motor\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eClutch and Gear Assembly\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMounting Brackets and Hardware\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDrive Corrector Hand Controller\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eBattery Power Pack\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Dual-Axis_Motor_Drive_for_CG-4_Mounts_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron Dual-Axis Motor Drive for CG-4 Mounts Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967184400669,"sku":"CEL-93522","price":243.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-Dual-Axis-Motor-Drive-for-CG-4-Mounts-93522-1__05230.1594230526.1280.1280.jpg?v=1684338259"},{"product_id":"sky-watcher-synscan-wifi-adapter","title":"Sky-Watcher SynScan Wifi Adapter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eEnables full wireless control of all Sky-Watcher GoTo mounts\u003c\/li\u003e\n\u003cli\u003eOperated via the free SynScan Pro app for iOS and Android\u003c\/li\u003e\n\u003cli\u003eReplaces the traditional hand controller with your smartphone or tablet\u003c\/li\u003e\n\u003cli\u003eIncludes both 6-to-8 pin (AZ) and 8-to-8 pin (EQ) cables\u003c\/li\u003e\n\u003cli\u003eCreates its own WiFi network; no internet connection required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSky-Watcher SynScan WiFi Adapter\u003c\/h2\u003e\n\u003cp\u003eThe Sky-Watcher SynScan WiFi Adapter modernizes your observing setup by enabling full wireless GoTo control from your smartphone or tablet. It connects directly to your mount's hand controller port using the included 6-to-8 pin or 8-to-8 pin cable, replacing the physical controller entirely. With the robust SynScan Pro app, available for both iOS and Android, you gain a graphical, intuitive interface for alignment, object selection, and slewing, all without the tangle of extra wires at the telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eControl Your Mount from the SynScan Pro App\u003c\/h3\u003e\n\u003cp\u003eThis adapter transforms your personal device into a powerful, full-featured astronomical controller. The SynScan Pro app is more than a simple remote; it contains a database of celestial objects, advanced alignment routines, and telescope status information, all accessible from a familiar touch interface. The app connects to the adapter's self-generated WiFi network, meaning you don't need an active internet connection or router in the field to operate your telescope.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull GoTo Functionality:\u003c\/strong\u003e Access alignment procedures, slew to objects from the internal database, and sync on targets just as you would with the physical hand controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntuitive Interface:\u003c\/strong\u003e Navigate the sky using a graphical planetarium interface on your device, making object selection faster and more intuitive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Internet Required:\u003c\/strong\u003e The module acts as its own WiFi access point, ensuring a reliable connection even at remote dark-sky sites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSynScan WiFi Adapter vs. the SynScan V5 Hand Controller\u003c\/h3\u003e\n\u003cp\u003eWhile the standard V5 hand controller is a reliable tool, the SynScan WiFi Adapter offers a fundamentally different operating experience. The primary trade-off is moving from a dedicated, physical keypad to a screen-based app on a device you already own.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser Interface:\u003c\/strong\u003e The adapter allows for a richer, graphical planetarium interface on a larger color screen, which many users find easier to navigate than the text-based menus of the hand controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e The WiFi adapter draws power from the mount, but your smartphone or tablet's battery life becomes a factor for long observing sessions. The hand controller has no such dependency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Updates:\u003c\/strong\u003e Updating the app is typically faster and easier through your device's app store than updating the firmware on a physical hand controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Feedback:\u003c\/strong\u003e The hand controller offers tactile feedback from physical buttons, which can be easier to operate with gloves on in cold weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Compatibility with Sky-Watcher GoTo Mounts\u003c\/h3\u003e\n\u003cp\u003eThe SynScan WiFi Adapter is engineered to work with the entire line of Sky-Watcher's SynScan-equipped GoTo mounts. To ensure broad compatibility across different mount types and generations, two separate cables are included in the box. This eliminates any guesswork when connecting to your specific equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Equatorial Mounts:\u003c\/strong\u003e Use the included 8-pin-to-8-pin cable for models like the EQ6-R Pro, HEQ5, AZ-EQ5, and AZ-EQ6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Alt-Azimuth Mounts:\u003c\/strong\u003e Use the 6-pin-to-8-pin cable for mounts like the AZ-GTi (in EQ mode), SolarQuest, and other AZ models with a 6-pin port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant Note:\u003c\/strong\u003e This adapter is not compatible with the Sky-Watcher Star Adventurer or Star Adventurer Mini tracking platforms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect the SynScan WiFi Adapter to my Sky-Watcher EQ6-R Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor the EQ6-R Pro and other Sky-Watcher equatorial mounts, you will use the included \u003cstrong\u003e8-pin-to-8-pin cable\u003c\/strong\u003e. Plug one end into the port on the WiFi adapter and the other end into the port on the mount labeled \"Hand Control.\" Then, power on your mount, search for the SynScan WiFi network on your phone, and connect to it before opening the SynScan Pro app.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the SynScan WiFi Adapter for astrophotography with software like N.I.N.A. or an ASIAIR?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The SynScan WiFi Adapter creates a network that allows computer control. You can connect your capture computer or an ASIAIR to the adapter's WiFi network. In your control software, you will typically select the \"SynScan App\" or \"SynScan Mobile\" driver to establish a connection with the mount for slewing, guiding, and plate solving.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the SynScan WiFi Adapter require an internet connection to work in the field?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, an internet connection is not required. The adapter generates its own local WiFi network. You simply connect your smartphone, tablet, or computer directly to this \"SynScan\" network to communicate with the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the SynScan WiFi Adapter work with my Sky-Watcher Star Adventurer 2i?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The SynScan WiFi Adapter is \u003cstrong\u003enot compatible\u003c\/strong\u003e with the Star Adventurer or Star Adventurer Mini. These platforms have their own built-in WiFi for controlling settings via the Star Adventurer Console app and are not GoTo systems in the same way as the larger SynScan mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the main advantages of using the SynScan WiFi Adapter over the standard hand controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantages are a modern, graphical user interface on a device you already own, the elimination of a coiled cable that can snag in the dark, and easier updates via the app store. The visual planetarium display in the SynScan Pro app makes finding and identifying targets much more intuitive than scrolling through text-based menus.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich cable do I use for my Sky-Watcher mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe adapter includes two cables to fit all compatible mounts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the \u003cstrong\u003e8-pin-to-8-pin cable\u003c\/strong\u003e for most equatorial mounts (HEQ5, EQ6-R, AZ-EQ6, etc.).\u003c\/li\u003e\n\u003cli\u003eUse the \u003cstrong\u003e6-to-8-pin cable\u003c\/strong\u003e for alt-azimuth mounts that have a 6-pin hand controller port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eAll Sky-Watcher SynScan GoTo mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible With\u003c\/td\u003e\n\u003ctd\u003eSky-Watcher Star Adventurer, Star Adventurer Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl App\u003c\/td\u003e\n\u003ctd\u003eSynScan Pro (iOS and Android)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eCreates its own WiFi network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCables Included\u003c\/td\u003e\n\u003ctd\u003e6-pin to 8-pin (for AZ mounts), 8-pin to 8-pin (for EQ mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eSynScan WiFi Adapter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e6-pin to 8-pin Cable (for AZ Mounts)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e8-pin to 8-pin Cable (for EQ Mounts)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.skywatcherusa.com\/pages\/apps\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload SynScan Pro App\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/sky-watcher-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSky-Watcher 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sky-Watcher","offers":[{"title":"Default Title","offer_id":44967194460445,"sku":"SW-S30103","price":100.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Sky-Watcher-SynScan-Wifi-Adapter-S30103-1__29055.1594170811.1280.1280.jpg?v=1684338634"},{"product_id":"sky-watcher-synscan-gps-module","title":"Sky-Watcher SynScan GPS Module","description":"\u003cul class=\"DAV-feature-list\"\u003e\n  \u003cli\u003eAutomatically inputs GPS data: time, date, and location\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Sky-Watcher SynScan hand controllers\u003c\/li\u003e\n  \u003cli\u003eAccelerates mount alignment and setup\u003c\/li\u003e\n  \u003cli\u003eIncreases GoTo pointing accuracy\u003c\/li\u003e\n  \u003cli\u003eSimple plug-and-play operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n  \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n  \u003cli\u003eFAQ\u003c\/li\u003e\n  \u003cli\u003eSpecifications\u003c\/li\u003e\n  \u003cli\u003eIn the Box\u003c\/li\u003e\n  \u003cli\u003eDownloads\u003c\/li\u003e\n  \u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n  \u003cli class=\"active\"\u003e\n    \u003cdiv\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section-center\"\u003e\n          \u003ch2\u003eSky-Watcher SynScan GPS Module\u003c\/h2\u003e\n          \u003cp\u003eThe Sky-Watcher SynScan GPS Module eliminates the most tedious part of setting up your GoTo mount by automatically feeding precise time, date, and location data directly to your SynScan hand controller. This simple, plug-in accessory ensures your mount's alignment is based on accurate global positioning data, leading to significantly more accurate GoTo slews and tracking right from the start of your session.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eAutomated Initialization for Any SynScan Mount\u003c\/h3\u003e\n          \u003cp\u003eSetting up a computerized mount requires entering your precise latitude, longitude, date, and local time. The SynScan GPS Module automates this entire process. Once connected, it acquires a satellite lock and populates all required fields on the hand controller, saving you valuable field time and removing the risk of manual entry errors that can compromise pointing accuracy.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eImproved GoTo Accuracy from the First Star\u003c\/h3\u003e\n          \u003cp\u003eA GoTo system's accuracy is fundamentally dependent on the quality of its initial alignment data. By providing real-time, satellite-derived location and time information, the SynScan GPS Module gives your mount a more precise foundation for its sky model. This translates directly to more accurate pointing, placing objects closer to the center of your eyepiece or camera sensor on the first slew.\u003c\/p\u003e\n          \u003cul\u003e\n            \u003cli\u003e\n              \u003cstrong\u003eTime Savings:\u003c\/strong\u003e Skips the need to check your watch or phone and manually input multiple data points before you can begin alignment.\n            \u003c\/li\u003e\n            \u003cli\u003e\n              \u003cstrong\u003eError Reduction:\u003c\/strong\u003e Eliminates typos in coordinates or mistakes with time zones and daylight saving settings that are common sources of alignment failure.\n            \u003c\/li\u003e\n            \u003cli\u003e\n              \u003cstrong\u003eTravel Ready:\u003c\/strong\u003e For observers who travel to different dark sky sites, the module makes setup effortless—just plug it in, and your new location is automatically detected.\n            \u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eUniversal Plug-and-Play Compatibility\u003c\/h3\u003e\n          \u003cp\u003eThe SynScan GPS Module is engineered for seamless integration with the entire ecosystem of Sky-Watcher GoTo mounts. It connects to the dedicated port on any mount equipped with a SynScan hand controller, from the portable Star Adventurer GTi to the observatory-class EQ8-R Pro. There is no software to install or complex configuration required; the hand controller automatically recognizes the module upon connection.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SynScan GPS Module improve my alignment on an EQ6-R Pro?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eThe SynScan GPS Module automates the first, most critical step of your alignment. Instead of you manually entering the date, time, latitude, and longitude into the SynScan hand controller for your EQ6-R Pro, the module does it for you with high precision. This removes any chance of human error and provides the mount with a more accurate starting point, resulting in better initial GoTo slews.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eI travel to different imaging sites with my HEQ5. Is the SynScan GPS Module worth it?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eAbsolutely. For a traveling astrophotographer, the SynScan GPS Module is a significant time-saver. Each time you set up your HEQ5 at a new location, the module will automatically detect the new coordinates and current time. You won't have to look up the latitude and longitude for each new site, making your setup process faster and more consistent every time.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eIs the SynScan GPS Module compatible with my AZ-GTi mount?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eYes, the SynScan GPS Module is compatible with any Sky-Watcher mount that uses a SynScan hand controller, including the AZ-GTi. It will provide the same automatic time and location data to streamline your setup.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the SynScan GPS Module require batteries or an external power source?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eNo, the module draws a small amount of power directly from the mount through the hand controller port. It does not require any separate batteries or power cables.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eHow long does it take for the SynScan GPS Module to acquire a satellite signal?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eFrom a cold start, it typically takes a minute or two to lock onto the GPS satellite network. Subsequent uses are often faster. A clear view of the open sky is required for reliable signal acquisition.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the SynScan GPS Module with the SynScan Pro App instead of the hand controller?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eThe SynScan GPS Module connects physically to the hand controller port on the mount. If you are controlling your mount via Wi-Fi with the SynScan Pro App on your phone, the app will use your phone's internal GPS to get location and time data, making the external GPS module redundant in that specific scenario.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ctable class=\"DAV-specifications\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCompatibility\u003c\/td\u003e\n          \u003ctd\u003eAll Sky-Watcher mounts using a SynScan hand controller\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFunction\u003c\/td\u003e\n          \u003ctd\u003eProvides GPS data (time, date, location) to hand controller\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInterface\u003c\/td\u003e\n          \u003ctd\u003eConnects to SynScan hand controller port\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePower Source\u003c\/td\u003e\n          \u003ctd\u003ePowered by mount (no external power required)\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cul class=\"DAV-grid\"\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\n        \u003cdiv\u003e\n          \u003cp class=\"DAV-item-title\"\u003eSynScan GPS Module\u003c\/p\u003e\n          \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cul class=\"DAV-grid\"\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Sky-Watcher_SynScan_V5_Hand_Control_Manual.pdf\" target=\"_blank\"\u003e\n          \u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n            \u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\n          \u003c\/svg\u003e\n          \u003cdiv\u003e\n            \u003cp class=\"DAV-item-title\"\u003eDownload SynScan V5 Hand Control Manual\u003c\/p\u003e\n          \u003c\/div\u003e\n        \u003c\/a\u003e\u003c\/li\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.skywatcherusa.com\/pages\/apps\" target=\"_blank\"\u003e\n          \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\n            \u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\n          \u003c\/svg\u003e\n          \u003cdiv\u003e\n            \u003cp class=\"DAV-item-title\"\u003eDownload SynScan Pro App\u003c\/p\u003e\n          \u003c\/div\u003e\n        \u003c\/a\u003e\u003c\/li\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.skywatcherusa.com\/pages\/firmware-and-software\" target=\"_blank\"\u003e\n          \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\n            \u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\n          \u003c\/svg\u003e\n          \u003cdiv\u003e\n            \u003cp class=\"DAV-item-title\"\u003eDownload Sky-Watcher Software\u003c\/p\u003e\n          \u003c\/div\u003e\n        \u003c\/a\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/davidastro.com\/pages\/sky-watcher-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSky-Watcher 2-Year Warranty\u003c\/a\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sky-Watcher","offers":[{"title":"Default Title","offer_id":44967194493213,"sku":"SW-S30104","price":300.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Sky-Watcher-SynScan-GPS-Module-S30104-1__66994.1594170811.1280.1280.jpg?v=1684338591"},{"product_id":"pegasus-eqdir-usb-stick-for-eqmod","title":"Pegasus EQDIR USB Stick for EQMOD","description":"\u003c!-- more --\u003e\u003cp\u003e\u003cspan\u003eOur new compact EQDir USB Stick Adapter for EQMOD allows direct connection of Skywatcher HEQ5 Syntrek\/PRO, NEQ6 Syntrek\/PRO, AZ EQ6-GT and EQ8 mounts to your PC or laptop. With this adapter you can remote control your Skywatcher mount directly via PC. No handbox controller is needed and the device is perfect for remote observatories.\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eMount Compatibility\u003c\/h3\u003e\u003cp\u003eChoose the appropriate model (DB9 or RJ45) for your mount model. You can use the same device in both of your mounts. Just attach the adapter RJ45 to DB9 and you are ready to go.\u003c\/p\u003e\u003ch4\u003eRJ45 Cable type\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSkywatcher HEQ5\u003c\/li\u003e\n\u003cli\u003eSkywatcher AZ-HEQ5\u003c\/li\u003e\n\u003cli\u003eSkywatcher AZ-EQ6\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ6-R\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ8\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ6-R Pro\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDB9 Cable type\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSkywatcher EQ6\u003c\/li\u003e\n\u003cli\u003eSkywatcher NEQ6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEQDIR heart is based on FTDI USB to Serial Chip\u003c\/h3\u003e\u003cp\u003eThe device uses an \u003cstrong\u003eoriginal\u003c\/strong\u003e FTDI chip. This chip is fully compatible and functional with Windows XP, 7 , 8, 10, OSX, Linux. There is no need to install external drivers as Windows Update will install the latest FTDI driver. Just plug it in your PC and play.\u003c\/p\u003e\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eSpecifications\u003c\/p\u003e\n\u003cdiv\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Connector\u003c\/td\u003e\n\u003ctd\u003eRJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Connector (USB Model only)\u003c\/td\u003e\n\u003ctd\u003eUSB type A (PC Stick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength \u003c\/td\u003e\n\u003ctd\u003e2 meters \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable to mount\u003c\/td\u003e\n\u003ctd\u003eUSB to RJ45 or USB to DB9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eIn the Box\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eEQDir USB Stick Adapter Device\u003c\/li\u003e\n\u003cli\u003eAdapter RJ45 to DB9 * If you ordered the DB9 version\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eDownloads\u003c\/p\u003e\n\u003cdiv\u003e\u003ca title=\"Quick Install Guide – EQDir USB Stick Adapter\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/t\/7\/assets\/description_image_Pegasus_Quick_Install_Guide_EQDir_USB_Stick_Adapter.pdf?v=1684344994\" target=\"_blank\" rel=\"noopener\"\u003eQuick Install Guide – EQDir USB Stick Adapter\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Pegasus Astro","offers":[{"title":"RJ45","offer_id":44967644168477,"sku":"PEG-EQDIR-USB-RJ","price":58.0,"currency_code":"CAD","in_stock":true},{"title":"DB9","offer_id":44967644201245,"sku":"PEG-EQDIR-USB-DB9","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Pegasus-EQDir-USB-Stick-EQMOD__93956.1646854636.1280.1280.jpg?v=1684345007"},{"product_id":"sky-watcher-v5-synscan-handbox-controller","title":"Sky-Watcher V5 Synscan Handbox Controller","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoTo Navigation:\u003c\/strong\u003e Access a database of over 42,000 celestial objects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative PC Connectivity:\u003c\/strong\u003e Features a built-in USB-B 2.0 port for direct computer control and firmware updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Mount Cables:\u003c\/strong\u003e Includes cables for both equatorial and alt-azimuth Sky-Watcher SynScan mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNight Vision Friendly:\u003c\/strong\u003e Red LED illuminated keypad and adjustable-brightness backlit LCD preserve dark adaptation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-Ready Design:\u003c\/strong\u003e Tactile keypad offers positive feedback with gloved hands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSky-Watcher V5 Synscan Handbox Controller\u003c\/h2\u003e\n\u003cp\u003eThe Sky-Watcher V5 Synscan Handbox Controller (S30106) is the GoTo handset for Sky-Watcher SynScan computerized mounts, with a 42,000+ object database. A built-in USB-B 2.0 port gives a straightforward connection to your PC, not only for control but also for firmware updates. It comes with cables for both alt-azimuth and equatorial Sky-Watcher mounts, so one handset serves either mount type.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e42,000+ Object Database for GoTo Control\u003c\/h3\u003e\n\u003cp\u003eThe SynScan V5 holds a database of more than 42,000 objects for GoTo pointing with your Sky-Watcher SynScan mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDirect PC Connection via USB-B 2.0\u003c\/h3\u003e\n\u003cp\u003eThe V5 controller has a built-in USB-B 2.0 port, allowing a straightforward connection to your PC not only for mount control, but also for firmware updates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDesigned for Use in the Field\u003c\/h3\u003e\n\u003cp\u003eThe tactile keypad offers positive feedback with gloved hands, while the red LED illumination and the backlit, high-contrast LCD with adjustable brightness help preserve your night vision. With cables for both equatorial and alt-azimuth mounts included, the V5 serves either type of Sky-Watcher SynScan mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the V5 Synscan controller with a Celestron or Meade mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The Sky-Watcher V5 Synscan Handbox Controller is \u003cstrong\u003eonly compatible with Sky-Watcher SynScan mounts\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the V5 Synscan controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe V5 controller has a built-in \u003cstrong\u003eUSB-B 2.0 port\u003c\/strong\u003e that connects directly to your PC, both for mount control and for firmware updates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the V5 Synscan controller include the correct cable for my HEQ5 Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The HEQ5 Pro is an equatorial mount, and the V5 Synscan controller package \u003cstrong\u003eincludes the equatorial mount cable\u003c\/strong\u003e. It also comes with a separate cable for Sky-Watcher's alt-azimuth mounts, so you are covered for either type.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the display on the V5 Synscan controller usable in both bright daylight and dark nights?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe controller has a backlit, high-contrast LCD with \u003cstrong\u003eadjustable brightness\u003c\/strong\u003e, so you can set the display to suit your conditions, and a red LED illuminated keypad to help preserve night vision.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003eS30106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSynScan GoTo hand controller, version 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e42,000+ objects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible With\u003c\/td\u003e\n\u003ctd\u003eSky-Watcher SynScan mounts only (equatorial and alt-azimuth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Port\u003c\/td\u003e\n\u003ctd\u003eBuilt-in USB-B 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eBacklit high-contrast LCD, adjustable brightness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeypad\u003c\/td\u003e\n\u003ctd\u003eTactile, usable with gloves; red LED illumination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eSynScan V5 hand controller\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eEquatorial mount cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAlt-Az mount cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/sky-watcher-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSky-Watcher 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sky-Watcher","offers":[{"title":"Default Title","offer_id":44967732216093,"sku":"SW-S30106","price":240.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Sky-Watcher-V5-Hand-Controller-S30106__37713.1646850173.1280.1280.jpg?v=1684345638"},{"product_id":"primalucelab-eqmod-usb-interface-for-eq6","title":"PrimaLuceLab EQMOD USB Interface for EQ6","description":"\u003c!-- more --\u003eThe EQMOD USB interface allows you to connect SkyWatcher mounts to the control computer (also the EAGLE) bypassing the mount hand pad. Using the EQMOD software (freely downloadable from eq-mod.sourceforge.net) you can control the mount via a graphical interface that offers more features than the standard SkyWatcher mount hand pad. And it's the perfect accessory to control the telescope remotely using the EAGLE!\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eEQMOD USB interface for SkyWatcher mounts connects to the hand pad port of the SkyWatcher computerized mounts and the USB port of computer, so it's the perfect accessory for the remote control with EAGLE. In this way the mount is directly controlled by the computer (and not from the hand pad) allowing you to access advanced features not available with the \u003c\/span\u003e\u003cspan\u003ehand pad\u003c\/span\u003e\u003cspan\u003e: automatic execution of mosaics, N stars \u003c\/span\u003e\u003cspan\u003ealignment\u003c\/span\u003e\u003cspan\u003e, etc \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"EQMOD USB interface for EQ6\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/t\/7\/assets\/description_image_PrimaLuceLab_EQMOD_USB_interface_for_EQ6_Description_1.jpg?v=1684345994\" title=\"EQMOD USB interface for EQ6\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe connection cable is 2 meter long and it's equipped with software on CD-ROM. Compatible with all Windows (32 and 64 bit) starting from Windows XP and with different planetarium software like Cartes du Ciel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":44967824720157,"sku":"PLL-PLLUSBEQ6","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PrimaLuceLab-EQMOD-USB-interface-for-EQ6__05744.1617396001.1280.1280.jpg?v=1684346010"},{"product_id":"primalucelab-eqmod-usb-interface-for-eq5-heq5-az-eq5-az-eq6-and-eq8","title":"PrimaLuceLab EQMOD USB Interface for EQ5, HEQ5, AZ-EQ5, AZ-EQ6 and EQ8","description":"\u003c!-- more --\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eEQMOD USB interface for SkyWatcher mounts connects to the hand pad port of the SkyWatcher computerized mounts and the USB port of computer, so it's the perfect accessory for the remote control with EAGLE. In this way the mount is directly controlled by the computer (and not from the hand pad) allowing you to access advanced features not available with the \u003c\/span\u003e\u003cspan\u003ehand pad\u003c\/span\u003e\u003cspan\u003e: automatic execution of mosaics, N stars \u003c\/span\u003e\u003cspan\u003ealignment\u003c\/span\u003e\u003cspan\u003e, etc \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"EQMOD USB interface for AZ-EQ5, AZ-EQ6 and EQ6-R\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/t\/7\/assets\/description_image_PrimaLuceLab_EQMOD_USB_interface_for_EQ6_Description_1.jpg?v=1684345994\" title=\"EQMOD USB interface for AZ-EQ5, AZ-EQ6 and EQ6-R\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe connection cable is 2 meter long and it's equipped with software on CD-ROM. Compatible with all Windows (32 and 64 bit) starting from Windows XP and with different planetarium software like Cartes du Ciel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":44967825768733,"sku":"PLL-PLLUSBAZEQ6","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PrimaLuceLab-EQMOD-USB-interface-for-EQ5-HEQ5-AZ-EQ5-AZ-EQ6-and-EQ8__87893.1617396001.1280.1280.jpg?v=1684346012"},{"product_id":"software-bisque-paramount-me-ii-mx-mx-myt-homing-sensor-cable","title":"Software Bisque Paramount ME II\/MX\/MX+\/MYT Homing Sensor Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eOfficial Software Bisque replacement part\u003c\/li\u003e\n\u003cli\u003eCompatible with Paramount ME II, MX, MX+, and MYT mounts\u003c\/li\u003e\n\u003cli\u003eRestores mount homing sensor functionality\u003c\/li\u003e\n\u003cli\u003eWeight: 1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSoftware Bisque Paramount ME II\/MX\/MX+\/MYT Homing Sensor Cable\u003c\/h2\u003e\n\u003cp\u003eThe Software Bisque Paramount ME II\/MX\/MX+\/MYT Homing Sensor Cable is a direct OEM replacement part, weighing 1 lb and packaged with dimensions of 4.5 × 12 × 4 inches, designed to restore the critical homing sensor connection for your mount. This cable is essential for the mount's ability to find its precise, repeatable zero position, a prerequisite for accurate GoTo slewing and tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 1 lb OEM Cable for Paramount ME II, MX, MX+, and MYT Mounts\u003c\/h3\u003e\n\u003cp\u003eThis 1 lb cable is the specific component required to connect the homing sensors on Software Bisque Paramount ME II, MX, MX+, and MYT mounts. A functioning homing sensor cable is non-negotiable for the mount's initialization sequence, as it allows the control system to establish a reliable reference point before any astronomical operations begin.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuaranteed Compatibility:\u003c\/strong\u003e As an official Software Bisque component, this cable ensures a perfect fit and correct electronic communication with the Paramount ME II, MX, MX+, and MYT series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestore Critical Function:\u003c\/strong\u003e Replaces a lost or damaged cable to restore the mount's ability to home itself, a fundamental requirement for accurate pointing, polar alignment, and unguided imaging workflows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the Paramount Homing Sensor Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable connects the homing sensors to the main electronics board of the Paramount mount. These sensors allow the mount to find its physical \"home\" or zero position, which is a critical first step for achieving accurate GoTo slewing and tracking for the rest of the night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich Paramount mounts are compatible with this homing sensor cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is an official replacement part specifically for the \u003cstrong\u003eSoftware Bisque Paramount ME II, Paramount MX, Paramount MX+, and Paramount MYT\u003c\/strong\u003e models. It is not intended for other mount series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if I need to replace my Paramount's homing sensor cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIf your mount fails to complete its homing sequence, or if you receive specific homing sensor errors within TheSkyX software, the cable is a primary suspect. Before ordering, check for visible damage to your existing cable or insecure connections at either end.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this an official Software Bisque part?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This is a genuine OEM (Original Equipment Manufacturer) replacement part sourced directly from Software Bisque, ensuring full compatibility and reliability with your Paramount mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy Paramount MYT is failing its homing sequence before an imaging run on the Orion Nebula (M42). Could this cable be the problem?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, a faulty or disconnected homing sensor cable is a very common cause for homing failures on a Paramount MYT. If the mount cannot find its home position, it cannot accurately slew to any target, including the Orion Nebula (M42). Replacing the cable is a logical troubleshooting step.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI damaged the cable on my Paramount MX+ during transport. Will this 1 lb cable restore my mount's GoTo accuracy?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. If the damaged cable is the reason your Paramount MX+ cannot home properly, this 1 lb replacement will restore that function. Once the mount can successfully home, its pointing model and GoTo accuracy will be restored to their normal precision.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Dimensions\u003c\/td\u003e\n\u003ctd\u003e4.5 × 12 × 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eParamount Homing Sensor Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Software_Bisque_Paramount_Series_6_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/software-bisque-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSoftware Bisque 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Software Bisque","offers":[{"title":"Default Title","offer_id":44967902576925,"sku":"SB10297","price":133.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Software-Bisque-Paramount-ME-II-MX-MX-plus-MYT-Homing-Sensor-Cable-SB10297-1__26260.1620881772.1280.1280.jpg?v=1684346751"},{"product_id":"software-bisque-paramount-me-homing-sensor-cable-24","title":"Software Bisque Paramount ME Homing Sensor Cable - 24\"","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDirect replacement for the Paramount ME homing sensor\u003c\/li\u003e\n\u003cli\u003eCompatible with both MKS 4000 and MKS 5000 control systems\u003c\/li\u003e\n\u003cli\u003eComplete assembly includes integrated RA and Dec sensors\u003c\/li\u003e\n\u003cli\u003eRestores precise, repeatable home position finding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSoftware Bisque Paramount ME Homing Sensor Cable - 24\"\u003c\/h2\u003e\n\u003cp\u003eThis genuine Software Bisque Paramount ME Homing Sensor Cable is a direct replacement part, weighing 1 lbs and shipping in a 4 x 5 x 2 in package, that restores precise homing functionality to your mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRestore Paramount ME Homing with MKS 4000\/5000 Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis is the complete replacement homing sensor cable assembly for the Software Bisque Paramount ME mount. It's the official component required to restore the mount's ability to find its home position accurately, a critical step for successful GoTo alignment and unguided tracking.\u003c\/p\u003e\n\u003cp\u003eCrucially, this cable is fully compatible with both the MKS 4000 and the newer MKS 5000 control systems, ensuring it works across different generations of the Paramount ME. The assembly is a single, integrated unit that includes the sensors for both the right ascension and declination axes, simplifying installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the Software Bisque Paramount ME Homing Sensor Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is a factory replacement part designed to fix homing issues on a Paramount ME mount. It contains the sensors and wiring that allow the mount to find its precise, repeatable \u003cstrong\u003ehome position\u003c\/strong\u003e, which is critical for accurate GoTo pointing and tracking initialization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Paramount ME Homing Sensor Cable compatible with both MKS 4000 and MKS 5000 systems?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This cable assembly is a direct replacement for Paramount ME mounts running either the \u003cstrong\u003eMKS 4000\u003c\/strong\u003e or the \u003cstrong\u003eMKS 5000\u003c\/strong\u003e control system, ensuring broad compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy Paramount ME fails to home on one axis. Could this cable be the problem?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, a failure to home is a common symptom of a damaged or failed homing sensor cable. Since this assembly includes the sensors for both the \u003cstrong\u003eright ascension and declination axes\u003c\/strong\u003e, it is the correct part to replace when troubleshooting homing errors on either axis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Paramount ME Homing Sensor Cable include the actual sensors?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e The assembly is a complete unit. It includes the wiring harness and the two integrated homing sensors for both the RA and Dec axes. You are replacing the entire component, not just the wire.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have a Paramount MYT mount that won't home. Will this cable work for it?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo.\u003c\/strong\u003e This cable is specifically designed for the Software Bisque \u003cstrong\u003eParamount ME\u003c\/strong\u003e model. Using it on other mounts like the MYT or MX+ is not supported and will not work due to differences in length, connectors, and sensor placement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow can I confirm this is the part I need before ordering?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis part is the official \"Paramount ME Homing Sensor Cable Assembly\" from the vendor catalog. If your mount is a Paramount ME and is experiencing homing failures, this is the standard replacement part provided by Software Bisque.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4 × 5 × 2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/software-bisque-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSoftware Bisque 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Software Bisque","offers":[{"title":"Default Title","offer_id":44967903822109,"sku":"SB10191","price":224.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Software-Bisque-Paramount-ME-Homing-Sensor-Cable-24-SB10191-1__33770.1620881773.1280.1280.jpg?v=1684346765"},{"product_id":"software-bisque-wisky-mks-5000-wi-fi-control","title":"Software Bisque WiSky MKS 5000 Wi-Fi Control","description":"\u003c!-- more --\u003e\u003cp\u003eMake your Paramount with MKS5000 control system wireless!\u003c\/p\u003e\u003cp\u003eWiSky(tm) allows TheSkyX Pro or TheSky for iOS to wirelessly control your Paramount ME II, Paramount MX, Paramount MYT, any Paramount ME upgraded with the MKS 5000, or any mount that employs Software Bisque’s MKS 5000 dual-axis motion control system. The WiSky is a PCB that plugs into the MKS 5000. Use TheSkyX Pro to configure the WiSky from the Bisque TCS Window.\u003c\/p\u003e\u003cp\u003eNote that the WiSky does not provide wireless access to the USB ports on the Versa-Plate’s Instrument Panel.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eAdditional information\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eAdditional information\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e10 × 9 × 3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eDocumentation\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bisque.comhttps:\/\/www.bisque.com\/downloads\/wisky-installation-and-use-instructions\/\"\u003eWiSky Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bisque.com\/downloads\/wisky-installation-instruction-video\/\"\u003eWiSky Installation Instructions (Video)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Software Bisque","offers":[{"title":"Default Title","offer_id":44967907459357,"sku":"SB10273","price":591.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Software-Bisque-WiSky-MKS-5000-Wi-Fi-Control-SB10273-1__39314.1620881779.1280.1280.jpg?v=1684346850"},{"product_id":"software-bisque-paramount-and-mks-5000-hand-paddle-joystick","title":"Software Bisque Paramount and MKS 5000 Hand Paddle\/Joystick","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eReplacement joystick for Paramount mounts\u003c\/li\u003e\n\u003cli\u003eNative compatibility with MKS 5000 and MKS 6000 controllers\u003c\/li\u003e\n\u003cli\u003eBackward compatible with MKS 4000 systems with firmware v2.8.6\u003c\/li\u003e\n\u003cli\u003eProvides tactile, responsive slewing and centering\u003c\/li\u003e\n\u003cli\u003eWeight: 3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSoftware Bisque Paramount and MKS 5000 Hand Paddle\/Joystick\u003c\/h2\u003e\n\u003cp\u003eThe Software Bisque Paramount and MKS 5000 Hand Paddle\/Joystick provides direct, tactile slewing control for your Paramount mount in a robust 3 lb package measuring 4.5 × 12 × 4 inches. This controller serves as a dedicated replacement for mounts operating on MKS 5000 and MKS 6000 control systems, allowing for immediate, responsive adjustments without needing to interact with a computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDirect Control for MKS 5000, 6000, and Select MKS 4000 Systems\u003c\/h3\u003e\n\u003cp\u003eThis hand paddle is the standard factory replacement for all Software Bisque mounts running the MKS 5000 or MKS 6000 telescope control system. It also offers backward compatibility for older Paramount ME mounts, but with a critical firmware requirement.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMKS 5000\/6000 Systems:\u003c\/strong\u003e The joystick is plug-and-play, providing immediate control over your mount's motion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMKS 4000 System Compatibility:\u003c\/strong\u003e To use this hand paddle with a Paramount ME controlled by an MKS 4000 system, the controller's firmware must be updated to version 2.8.6 or later. Functionality is not guaranteed on earlier firmware versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this MKS 5000 Hand Paddle work with my Paramount ME with an MKS 4000 controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, but only if your MKS 4000 controller is running \u003cstrong\u003efirmware version 2.8.6\u003c\/strong\u003e or newer. Before purchasing, you must verify your firmware version using TheSkyX software to ensure compatibility. The paddle will not function correctly with older MKS 4000 firmware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the correct replacement joystick for a Paramount MYT with an MKS 6000 system?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This hand paddle is the standard replacement controller for any Paramount mount, including the MYT, that uses the MKS 6000 control system. It is a direct, plug-and-play replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the MKS 5000 Hand Paddle require any special software to use?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the hand paddle is a direct hardware interface to the MKS 5000 or MKS 6000 control system. It does not require any additional drivers or software on your computer to function for basic slewing control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary function of the MKS 5000 Hand Paddle during an imaging session?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary function is to provide immediate, tactile control for tasks like centering a guide star in your autoguider's field of view, making fine adjustments to your image framing, or manually slewing the telescope to a new position without having to use the mouse and keyboard on your control computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this MKS 5000 joystick to perform the initial alignment on my Paramount ME?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the hand paddle is ideal for the manual slewing portions of an alignment routine, such as TPoint mapping. It allows you to precisely center alignment stars in the eyepiece or camera field of view before adding a new pointing sample.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow can I check the firmware version on my MKS 4000 controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou can check your MKS 4000's firmware version by connecting your Paramount mount to a computer running \u003cstrong\u003eTheSkyX Pro\u003c\/strong\u003e. The firmware version is typically displayed in the telescope control panel upon connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.5 × 12 × 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eParamount Hand Paddle\/Joystick\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Software_Bisque_Paramount_Series_6_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.bisque.com\/my-account\/downloads\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/software-bisque-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSoftware Bisque 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Software Bisque","offers":[{"title":"Default Title","offer_id":44967907492125,"sku":"SB10228","price":748.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Software-Bisque-Paramount-and-MKS-5000-Hand-Paddle-Joystick-SB10228-1__15610.1620881779.1280.1280.jpg?v=1684346852"},{"product_id":"ioptron-rs232-rj9-serial-cable","title":"iOptron RS232-RJ9 Serial Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects PC RS232 Serial Port to an iOptron Mount\u003c\/li\u003e\n\u003cli\u003eEnables Direct Mount Control via ASCOM\u003c\/li\u003e\n\u003cli\u003eRequired for Mount and Hand Controller Firmware Updates\u003c\/li\u003e\n\u003cli\u003eStandard RJ9 and RS232 (DB9) Connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron RS232-RJ9 Serial Cable\u003c\/h2\u003e\n\u003cp\u003eThis is the official iOptron RS232-RJ9 serial cable, providing the essential physical link between a computer and your iOptron mount. It allows for direct communication, enabling firmware updates for the GoToNova hand controller and mount control boards. This connection is also the foundation for PC-based telescope control, allowing you to interface your mount with planetarium software and ASCOM drivers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe Essential Link for PC Control and Firmware Updates\u003c\/h3\u003e\n\u003cp\u003eTo keep your iOptron mount operating with the latest features and tracking improvements, firmware updates are critical. This cable connects your mount's RJ9 serial port directly to a computer's legacy RS232 (DB9) serial port, allowing the iOptron update utility to communicate with the hardware.\u003c\/p\u003e\n\u003cp\u003eBeyond maintenance, this cable unlocks the full potential of computerized telescope control. By connecting your mount to a PC, you can use the ASCOM platform to automate imaging sessions with software like N.I.N.A. or Sequence Generator Pro, or slew to targets directly from planetarium programs like Stellarium and Cartes du Ciel. Note that modern computers without a native serial port will require a separate, high-quality USB-to-RS232 adapter to use this cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the iOptron RS232-RJ9 Serial Cable used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe iOptron RS232-RJ9 cable is used for two primary purposes: \u003cstrong\u003efirmware updates\u003c\/strong\u003e for the mount and hand controller, and \u003cstrong\u003edirect PC control\u003c\/strong\u003e of the mount using planetarium software or ASCOM-compliant imaging applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need this iOptron cable to update the firmware on my mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, for most iOptron mounts, this specific cable is required to connect the mount's RJ9 port to a computer's serial port to perform firmware updates. Using an incorrect cable can fail to establish a connection or potentially damage the mount's electronics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy computer doesn't have a serial port. Can I still use the iOptron RS232-RJ9 cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, but you will need an additional accessory. If your computer only has USB ports, you must use a \u003cstrong\u003ehigh-quality USB-to-RS232 (DB9) adapter\u003c\/strong\u003e. The adapter creates a virtual COM port on your computer, which you then connect this iOptron cable to.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this cable allow me to control my iOptron mount with software like Stellarium or N.I.N.A.?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This cable provides the physical connection needed for software control. Once connected (with a USB-to-Serial adapter, if necessary), you will need to install the appropriate iOptron ASCOM driver on your PC. This driver allows applications like Stellarium, Cartes du Ciel, or N.I.N.A. to communicate with and control your mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the same cable that connects the hand controller to the iOptron mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, it is not. The cable that connects the hand controller to the mount is typically a coiled cable with RJ9 or similar connectors on both ends. This RS232-RJ9 cable is specifically for connecting the mount (or hand controller port) to a computer's serial port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect the iOptron RS232-RJ9 cable to control my CEM40 for imaging the Orion Nebula (M42)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo control your iOptron CEM40, you connect the RJ9 end of this cable to the serial port on the mount. The other end (RS232) connects to your computer or a USB-to-Serial adapter. After installing the iOptron Commander and ASCOM driver, you can use your preferred planetarium or imaging software to slew to M42 and begin your imaging sequence.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eRS232 (DB9 Female)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eRJ9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eiOptron mounts with RJ9 serial port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eiOptron RS232-RJ9 Serial Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":44967949664541,"sku":"IOP-8412","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/IOP-8412__32786.1639769251.1280.1280.jpg?v=1684347237"},{"product_id":"ioptron-usb-to-rs232-converter","title":"iOptron USB to RS232 converter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects iOptron mounts with RS232 ports to modern computers via USB\u003c\/li\u003e\n\u003cli\u003eEnables firmware updates for hand controllers and main boards\u003c\/li\u003e\n\u003cli\u003eAllows for direct PC control using planetarium software and ASCOM drivers\u003c\/li\u003e\n\u003cli\u003eOfficial iOptron accessory ensures driver compatibility and reliable connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron USB to RS232 Converter\u003c\/h2\u003e\n\u003cp\u003eThe iOptron USB to RS232 converter is the essential link between your iOptron mount and a modern computer. As laptops and desktops have phased out legacy serial ports, this adapter provides a reliable data connection through a standard USB port, enabling critical communication for firmware updates and advanced computer control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eEssential Connectivity for iOptron Mount Firmware and PC Control\u003c\/h3\u003e\n\u003cp\u003eThis converter is the officially supported method for updating the firmware on your iOptron mount's hand controller and main control board. Using the correct, tested hardware is critical for preventing communication errors during the update process, which could otherwise render a mount inoperable. Beyond firmware, it unlocks the ability to control your mount directly from a PC.\u003c\/p\u003e\n\u003cp\u003eBy connecting your mount to a computer, you can leverage ASCOM drivers to interface with popular planetarium software like Cartes du Ciel, Stellarium, or TheSkyX. This allows you to command your mount from a rich visual interface, replacing the hand controller for object selection and slewing, and is a foundational step for automated imaging sequences.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy do I need the iOptron USB to RS232 converter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMost modern computers no longer include the 9-pin RS232 serial port that iOptron mounts use for firmware updates and direct computer control. The \u003cstrong\u003eiOptron USB to RS232 converter\u003c\/strong\u003e bridges this gap, allowing you to connect your mount's serial port to a standard USB port on your laptop or PC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a generic USB-to-serial adapter with my iOptron mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile some generic adapters may work, many use chipsets with unreliable drivers that can cause connection drops or data corruption, especially during a critical firmware update. Using the official \u003cstrong\u003eiOptron USB to RS232 converter\u003c\/strong\u003e is highly recommended as it has been tested to ensure stable, error-free communication with their mounts and software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat software can I use with the iOptron USB to RS232 converter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis converter enables you to connect your mount to a wide range of software. Primarily, you will use it with iOptron's own firmware upgrade utility. For telescope control, it works with any software that communicates via the ASCOM platform, including popular choices like N.I.N.A., Sequence Generator Pro, Cartes du Ciel, and Stellarium.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I use this converter to update the firmware on my iOptron CEM40 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo update your iOptron CEM40, you will connect the RS232 end of the cable that came with your mount to the port on the mount, and the other end to this converter. Plug the converter's USB end into your computer. After installing the necessary drivers from iOptron's website, you can run the iOptron Upgrade Utility software to load the new firmware onto the mount's main board and hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the iOptron USB to RS232 converter require special drivers?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, like most USB-to-serial devices, a driver is required to create a virtual COM port on your computer. You should download the latest drivers directly from the support section of the iOptron website to ensure compatibility with your operating system, whether it's Windows or macOS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy new laptop only has USB-C ports. Can I still use this iOptron converter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The iOptron converter terminates in a standard USB-A connector. You can use it with a USB-C-only laptop by using a simple, widely available USB-A to USB-C adapter or a USB-C hub that has USB-A ports. The connection will function identically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":44967950090525,"sku":"IOP-8435","price":39.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/IOP-8435__09416.1639769343.1280.1280.jpg?v=1684347239"},{"product_id":"celestron-motor-board-for-cpc-telescopes","title":"Celestron Motor Board for CPC Telescopes","description":"\u003cul class=\"DAV-feature-list\"\u003e\n    \u003cli\u003eGenuine Celestron replacement motor control board\u003c\/li\u003e\n    \u003cli\u003eRestores accurate GoTo slewing and tracking\u003c\/li\u003e\n    \u003cli\u003eResolves common \"No Response\" error codes\u003c\/li\u003e\n    \u003cli\u003eDesigned for all models in the Celestron CPC series\u003c\/li\u003e\n    \u003cli\u003eCovered by a 2-Year Celestron warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n    \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n    \u003cli\u003eFAQ\u003c\/li\u003e\n    \u003cli\u003eSpecifications\u003c\/li\u003e\n    \u003cli\u003eIn the Box\u003c\/li\u003e\n    \u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n    \u003cli class=\"active\"\u003e\n        \u003cdiv\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section-center\"\u003e\n                    \u003ch2\u003eCelestron Motor Board for CPC Series Telescopes\u003c\/h2\u003e\n                    \u003cp\u003eBring the heart of your telescope's precision pointing back to life with the Celestron Motor Board for CPC Series Telescopes. This genuine Celestron replacement part is the definitive solution for restoring the accurate GoTo slewing and dependable tracking your CPC mount was designed for, backed by a 2-Year factory warranty. If your telescope has become unreliable, this board is the key component for returning its motor control system to factory-new condition.\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section\"\u003e\n                    \u003ch3\u003eRestore Your CPC's Original GoTo Slewing and Tracking\u003c\/h3\u003e\n                    \u003cp\u003eThe motor control board is the electronic brain of your CPC telescope's drive system, translating commands from the hand controller into precise physical movement. When this component fails, even a perfectly aligned telescope can suffer from erratic slewing, poor tracking, or a complete loss of communication with the motors, often resulting in \"No Response 16\" or \"No Response 17\" errors.\u003c\/p\u003e\n                    \u003cp\u003eBy replacing a faulty or damaged board, you restore the stable communication between the control system and the drive motors. This ensures your telescope responds instantly and accurately, finding and tracking celestial objects with the smooth, quiet precision you expect from a CPC system.\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section\"\u003e\n                    \u003ch3\u003eA Genuine Celestron Part for Guaranteed Compatibility\u003c\/h3\u003e\n                    \u003cp\u003eThis is an authentic Celestron-manufactured part, ensuring a perfect fit and seamless electronic integration with all CPC and CPC Deluxe telescopes, from the 8-inch model to the 11-inch. Using a genuine replacement part eliminates the guesswork and potential compatibility issues that can arise from third-party components. It's the most reliable way to ensure a lasting repair and maintain the integrity of your telescope's electronics.\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003cdiv class=\"DAV-section\"\u003e\n                    \u003ch3\u003eDiagnosing a Faulty Motor Board: Common Symptoms\u003c\/h3\u003e\n                    \u003cp\u003eIf your CPC mount is experiencing electronic issues, a failing motor board is a common cause. Before ordering, consider if your telescope exhibits any of the following symptoms, especially after confirming your power supply is stable and sufficient.\u003c\/p\u003e\n                    \u003cul\u003e\n                        \u003cli\u003e\n\u003cstrong\u003e\"No Response 16\" or \"No Response 17\" Errors:\u003c\/strong\u003e These messages on the hand controller specifically indicate a loss of communication with the azimuth (16) or altitude (17) motor control board.\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cstrong\u003eInability to Update Firmware:\u003c\/strong\u003e If the Celestron Firmware Manager (CFM) can update the hand control but fails when trying to update the motor control (MC), it strongly points to a problem with the board itself.\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cstrong\u003eErratic or Unresponsive Slewing:\u003c\/strong\u003e One or both axes may move unpredictably, fail to move at all, or continue moving after a command is stopped.\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cstrong\u003ePoor Tracking:\u003c\/strong\u003e The telescope may fail to keep objects centered in the eyepiece during long observations, even after a successful alignment.\u003c\/li\u003e\n                    \u003c\/ul\u003e\n                    \u003cp\u003e\u003cem\u003ePlease Note: Due to the nature of electronic repairs, all replacement part sales are final. If you are unsure about the diagnosis, we recommend contacting Celestron technical support for assistance before purchase.\u003c\/em\u003e\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I know if my CPC telescope's motor board is the problem?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eThe most common indicators are persistent \u003cstrong\u003e\"No Response 16\" (Azimuth)\u003c\/strong\u003e or \u003cstrong\u003e\"No Response 17\" (Altitude)\u003c\/strong\u003e errors displayed on your NexStar hand controller. This signifies a communication failure between the hand controller and the motor board. Before assuming the board is faulty, always verify your power supply is providing at least 12V DC at 2.5 Amps, as insufficient power is the leading cause of these errors.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the correct motor board for my Celestron CPC 1100 Deluxe HD?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eYes, this motor board is the correct replacement part for all models in the Celestron CPC and CPC Deluxe series, including the 800, 925, and 1100 models, both standard and HD.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eIs installing the Celestron CPC motor board a difficult repair?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eFor individuals with some experience in electronics or mechanical repairs, the process is generally straightforward. The motor control board is located in one of the fork arms, and access is achieved by removing the outer plastic cover. However, it involves handling sensitive electronic components. If you are not comfortable performing the repair yourself, we recommend contacting Celestron or a qualified telescope repair service.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWill replacing the motor board fix the \"No Response\" error on my CPC mount?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eIf the error is caused by a hardware failure in the board itself, then yes, replacing it should resolve the issue. However, \"No Response\" errors can also be caused by low or unstable power, faulty cables, or a bad hand controller. It is crucial to troubleshoot these other potential causes first to ensure you are replacing the correct part.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this single motor board control both the altitude and azimuth motors?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eYes. On the CPC series mounts, a single motor control board is responsible for driving both the altitude (up\/down) and azimuth (left\/right) motors. The error code (16 for azimuth, 17 for altitude) helps diagnose which axis is experiencing the communication loss, but the fault lies on this single, replaceable board.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion\"\u003e\n            \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy should I use a genuine Celestron motor board for my CPC telescope?\u003c\/h3\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"DAV-accordion-A\"\u003e\n            \u003cp\u003eUsing a genuine Celestron replacement part guarantees correct fitment, electronic compatibility, and reliable communication with your telescope's other components, like the hand controller and GPS module. It ensures that the repair will restore the mount to its original factory specifications without risking damage from incompatible third-party electronics.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003ctable class=\"DAV-specifications\"\u003e\n            \u003ctbody\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eProduct Type\u003c\/td\u003e\n                    \u003ctd\u003eReplacement Motor Control Board\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eCompatibility\u003c\/td\u003e\n                    \u003ctd\u003eCelestron CPC and CPC Deluxe Series Telescopes\u003c\/td\u003e\n                \u003c\/tr\u003e\n                 \u003ctr\u003e\n                    \u003ctd\u003ePart Number\u003c\/td\u003e\n                    \u003ctd\u003eNXW431\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eWarranty\u003c\/td\u003e\n                    \u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n                \u003c\/tr\u003e\n            \u003c\/tbody\u003e\n        \u003c\/table\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n        \u003cul class=\"DAV-grid\"\u003e\n            \u003cli class=\"DAV-grid-item\"\u003e\n                \u003cdiv\u003e\n                    \u003cp class=\"DAV-item-title\"\u003eCelestron Motor Board for CPC Series Telescopes\u003c\/p\u003e\n                    \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44968081391901,"sku":"CEL-NXW431","price":244.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"zwo-amh-hand-controller","title":"ZWO AMH Hand Controller","description":"\u003cul class=\"DAV-feature-list\"\u003e\n    \u003cli\u003e\n        Allows to control AM3 \u0026amp; AM5 mounts\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n    \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n    \u003cli\u003eIn the Box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n    \u003cli class=\"active\"\u003e       \n        \u003cdiv\u003e\n            \u003c!-- Title image text --\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003c!-- Main Image --\u003e\n                \u003cdiv class=\"DAV-section-center\"\u003e\n                    \u003ch2\u003eZWO AMH Hand Controller - Overview\u003c\/h2\u003e\n                    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-AM3-WIRELESS-HAND-CONTROLLER-OPERATION.webp?v=1736534733\" alt=\"ZWO AMH Hand Controller - Overview\" class=\"DAV-img-banner\"\u003e\n                    \u003cp\u003e\n                        The ZWO ASI Mount Hand Controller features an intuitive joystick, enabling effortless movement of your ZWO AM3 or ZWO AM5 along both axes. Its ergonomic design fits comfortably in your hands, providing smooth control in all directions.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \n            \u003cdiv class=\"DAV-section-container\"\u003e\n                \u003cdiv class=\"DAV-section-text\"\u003e\n                    \u003ch3\u003e\n                        Rocker-style Hand Controller\n                    \u003c\/h3\u003e                \n                    \u003cp\u003e\n                        Comfortable touch and easy to use. Integrated with Wi-Fi network allowing for wireless control. You can easily upgrade the firmware of the hand controller and mount it on the webpage.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e    \n\n    \u003cli\u003e\n        \u003cul class=\"DAV-grid\"\u003e\n            \u003cli class=\"DAV-grid-item\"\u003e\n                \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-AMH-HAND-CONTROLLER.webp?v=1736537845\" alt=\"ZWO AMH Hand Controller - In The Box\" class=\"DAV-img-box\"\u003e\n                \u003cdiv\u003e\n                    \u003cp class=\"DAV-item-title\"\u003e\n                        AMH Hand Controller\n                    \u003c\/p\u003e\n                    \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/li\u003e\n            \u003c!-- Add more items as needed --\u003e\n        \u003c\/ul\u003e          \n    \u003c\/li\u003e\n\n\u003c\/ul\u003e\n","brand":"David Astro","offers":[{"title":"Default Title","offer_id":49561033867549,"sku":"ZWO-AMH","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-AMH-HAND-CONTROLLER.webp?v=1736537845"},{"product_id":"ioptron-istarfi-wi-fi-adapter-for-cem40-gem45","title":"iOptron iStarFi Wi-Fi Adapter for CEM40\/GEM45","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eWireless Mount Control for CEM40\/GEM45 Mounts\u003c\/li\u003e\n\u003cli\u003eSupports 802.11b\/g\/n Wi-Fi Protocol\u003c\/li\u003e\n\u003cli\u003eAccess Point (AP) and Station (STA) Modes\u003c\/li\u003e\n\u003cli\u003eASCOM and SkySafari Pro Compatible\u003c\/li\u003e\n\u003cli\u003eSupports iOS and Android Devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron iStarFi Wi-Fi Adapter for CEM40\/GEM45\u003c\/h2\u003e\n\u003cp\u003eThe iOptron iStarFi Wi-Fi Adapter for CEM40\/GEM45 provides dedicated wireless mount control over an 802.11b\/g\/n network, connecting directly to your mount with the included 6P6C cable. This allows you to command your iOptron mount from iOS or Android devices using popular planetarium software like SkySafari Pro, eliminating the need for a physical hand controller cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eWireless Mount Control for CEM40\/GEM45 Mounts\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for iOptron's CEM40 and GEM45 mounts, the iStarFi adapter streamlines your setup by replacing the wired connection between your mount and control device. This reduces cable drag and potential snags during an imaging session, offering greater freedom of movement around your telescope. Simply connect the adapter, join its network, and use your favorite planetarium software to slew, center, and track objects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAP and Station Modes: Flexible 802.11b\/g\/n Network Integration\u003c\/h3\u003e\n\u003cp\u003eThe iStarFi offers two distinct connection modes for maximum flexibility in the field or at home. In Access Point (AP) mode, the adapter creates its own Wi-Fi network that you can connect your smartphone or tablet to directly. In Station (STA) mode, the adapter joins your existing home or observatory Wi-Fi network, allowing you to control the mount from any device on that same network.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUnderstanding the iStarFi's Role: Mount Control Only\u003c\/h3\u003e\n\u003cp\u003eIt is critical to understand that the iStarFi is a specialized tool for wireless mount control—GoTo, slewing, and pointing commands. It is not an all-in-one astrophotography computer. The adapter does not transfer imaging data from a DSLR or dedicated astro camera, nor does it handle autoguiding commands which typically require a direct ST-4 or pulse-guiding connection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal For:\u003c\/strong\u003e Visual observers using SkySafari for tours of the night sky or imagers who need a simple wireless link for framing targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Designed For:\u003c\/strong\u003e Replacing a full observatory control system like an ASIAIR or a PC running an imaging suite that integrates camera, focuser, and guider control. For these applications, a robust, wired connection to the mount is recommended for reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat exactly does the iOptron iStarFi adapter control on my CEM40 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe iStarFi adapter is designed for \u003cstrong\u003emount control only\u003c\/strong\u003e. This includes GoTo slewing, manual slewing via virtual controls in an app, and selecting objects from a planetarium database to send to the mount. It replaces the basic pointing and slewing functions of a physical hand controller, but does not handle camera control, autoguiding, or other accessory data.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect my GEM45 mount to the iStarFi adapter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eConnection is straightforward. You plug the included \u003cstrong\u003e6P6C cable\u003c\/strong\u003e into the corresponding port on your GEM45 mount head and the other end into the iStarFi adapter. After powering on your mount, the adapter will begin broadcasting its own Wi-Fi network (in AP mode) which you can join with your phone, tablet, or PC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the iOptron iStarFi with an ASIAIR Pro or StellarMate?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe iStarFi is primarily designed to work with software that uses the \u003cstrong\u003eiOptron ASCOM driver\u003c\/strong\u003e on a Windows PC or with apps that support iOptron mounts directly via Wi-Fi, such as \u003cstrong\u003eSkySafari Pro\u003c\/strong\u003e. While devices like ASIAIR and StellarMate control mounts, compatibility with this specific Wi-Fi adapter is not guaranteed and depends on the available drivers within those operating systems. For integrated systems, a direct USB connection to the mount is often more reliable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI want to use SkySafari Pro on my iPad to slew my GEM45 to the Andromeda Galaxy (M31). Will the iStarFi work for this?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is the ideal use case for the iStarFi adapter. Once your iPad is connected to the iStarFi's Wi-Fi network and SkySafari Pro is configured for your iOptron mount, you can simply search for M31 in the app and press \"GoTo.\" The adapter will transmit the command to your GEM45, and the mount will slew to the galaxy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I'm imaging the Orion Nebula (M42) with my CEM40, will the iStarFi handle my autoguiding corrections?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the iStarFi is not intended for transmitting high-frequency autoguiding corrections. Guiding requires a stable, low-latency connection. You should continue to use a dedicated ST-4 cable from your guide camera to the mount's guide port or use pulse guiding through a direct USB connection from your computer to the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between Access Point (AP) and Station (STA) mode on the iStarFi?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThese two modes determine how the iStarFi connects to your devices.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess Point (AP) Mode:\u003c\/strong\u003e The adapter creates its own Wi-Fi hotspot. You connect your phone or computer directly to the iStarFi's network. This is best for use in the field where no other Wi-Fi is available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStation (STA) Mode:\u003c\/strong\u003e The adapter joins an existing Wi-Fi network, like your home router. This allows you to control your mount from a computer or device that is also on your home network, potentially from indoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eiOptron CEM40\/GEM45 Mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWi-Fi Standard\u003c\/td\u003e\n\u003ctd\u003e802.11b\/g\/n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Modes\u003c\/td\u003e\n\u003ctd\u003eAccess Point (AP) or Station (STA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlatform Support\u003c\/td\u003e\n\u003ctd\u003eiOS, Android, Windows PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware Control\u003c\/td\u003e\n\u003ctd\u003eSkySafari Pro, iOptron ASCOM driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Cable\u003c\/td\u003e\n\u003ctd\u003e6P6C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePassword Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eOne Year Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eiStarFi Wi-Fi Adapter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e6P6C Connection Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Telescope and 1-Year Accessory Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":50971814035741,"sku":"IOP-7434","price":189.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-StarFi-Wifi-Module.jpg?v=1771958338"},{"product_id":"tele-vue-pano-telepod-gib-encoder-kit","title":"Tele Vue Pano-TelePod- Gib Encoder Kit","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds Digital Setting Circle (Push-To) capability to compatible mounts\u003c\/li\u003e\n\u003cli\u003eHigh-Resolution 2160-step encoders for precise pointing\u003c\/li\u003e\n\u003cli\u003eCompatible with Tele Vue Panoramic, Tele-Pod, and newer Gibraltar mounts\u003c\/li\u003e\n\u003cli\u003eIncludes all required encoders, wiring, and hardware\u003c\/li\u003e\n\u003cli\u003eEnables use with Tele Vue Sky Tour and other DSC computers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUnlock the Sky with Your Tele Vue Mount\u003c\/h2\u003e\n\u003cp\u003eThe Tele Vue Pano-TelePod-Gib Encoder Kit (STN-4001) is the definitive upgrade for adding 'Push-To' digital setting circle capabilities to your Tele Vue alt-azimuth mount. This kit bridges the gap between purely manual observing and computerized object location. It provides the hardware to transform your fluid, intuitive Tele Vue mount into a precision instrument that can pinpoint thousands of celestial objects, all without sacrificing the hands-on feel that makes these mounts a joy to use.\u003c\/p\u003e\n\u003cp\u003eDesigned for seamless integration, this kit allows you to spend less time hunting for faint fuzzies and more time observing them. By pairing your mount with a digital setting circle (DSC) computer like the Tele Vue Sky Tour, you simply perform a quick two-star alignment. After that, the computer will guide you, providing real-time directional cues to push your telescope directly to any object in its database. It’s the perfect balance of technology and traditional observing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eHigh-Resolution Optical Encoders\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the system are two high-resolution optical encoders, one for the altitude (vertical) axis and one for the azimuth (horizontal) axis. These are not simple magnetic counters. Each encoder provides 2160 distinct steps, or \"ticks,\" per revolution, translating to a pointing resolution of 0.167 degrees. This level of precision is critical for placing objects in the eyepiece at medium to high magnifications, ensuring that when your DSC reads \"zero-zero,\" your target is waiting for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCustom-Engineered Delrin Housings\u003c\/h3\u003e\n\u003cp\u003eThe encoders are protected by robust, custom-machined Delrin housings. These housings serve a dual purpose. First, they shield the sensitive encoder electronics from dew, dust, and accidental bumps in the dark. Second, and more importantly, they provide a precise, no-slip mechanical interface between the encoders and the mount's moving axes. This direct coupling is essential for accurate pointing, as any mechanical play would introduce errors into the system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eIntegrated Wiring for Snag-Free Operation\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a complete wiring harness designed for a clean installation. A main harness connects the two encoders to a central junction box, and a separate \"pigtail\" harness connects the junction box to your DSC computer. This modular approach, combined with included Velcro fasteners, allows for tidy cable management, minimizing the risk of wires snagging or pulling as you move the telescope across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBroad Mount Compatibility for Tele Vue Systems\u003c\/h3\u003e\n\u003cp\u003eThis encoder kit is engineered specifically for Tele Vue's lightweight, grab-and-go mounts. It is fully compatible with the Panoramic mount, the Tele-Pod head, and newer Gibraltar mounts that utilize the Tele-Pod head. The included hardware ensures a perfect fit, turning these already excellent manual mounts into powerful object-locating tools. This targeted design guarantees that the installation is straightforward and the performance is reliable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe Power of \"Push-To\" Astronomy\u003c\/h3\u003e\n\u003cp\u003eAdding encoders to your mount fundamentally changes your observing sessions, especially under light-polluted skies or when hunting for challenging objects. Imagine wanting to view the galaxy M101. Instead of star-hopping through a faint field, your DSC computer guides you, telling you to move \"Up 14.2°, Left 35.7°\". As you push the scope, the numbers count down, and when they reach zero, the galaxy is in your eyepiece. This system allows you to find and observe dozens of objects in a single night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAn Honest Limitation: Not a Go-To System\u003c\/h3\u003e\n\u003cp\u003eIt is important to understand that this is an encoder kit for \"Push-To\" functionality, not a motorized \"Go-To\" system. The kit provides the position information; you provide the motion. This has the significant advantage of requiring no external power for motors, resulting in a lighter, faster, and silent setup. However, it does not offer motorized tracking, so you will still need to manually guide the telescope to follow an object as it moves across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eChoosing the Right Upgrade for Your Tele Vue Mount\u003c\/h3\u003e\n\u003cp\u003eThis kit is the only solution for adding digital setting circles to the Panoramic and Tele-Pod mounts. For Gibraltar mount owners, it's crucial to identify your model.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePano-TelePod-Gib Encoder Kit (STN-4001):\u003c\/strong\u003e This is the correct kit if you own a Panoramic mount, a Tele-Pod mount, or a newer Gibraltar mount that uses the Tele-Pod style head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOlder Gibraltar Mounts:\u003c\/strong\u003e If you have an older Gibraltar mount (pre-2013), you will require a different, specific encoder set. This kit (STN-4001) is not compatible with the older Gibraltar head design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis upgrade is for the observer who loves the simplicity and tactile feel of their Tele Vue mount but wants to eliminate the frustration of finding difficult targets. It adds a powerful layer of digital assistance without compromising the core experience of moving a telescope by hand under the stars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat do I need besides this kit to get Push-To functionality?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou will need a Digital Setting Circle (DSC) computer, such as the Tele Vue Sky Tour or a compatible unit from another manufacturer. The encoder kit provides the position data, and the DSC computer provides the user interface and object database.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this kit fit my older Tele Vue Gibraltar mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This STN-4001 kit is specifically for the Panoramic, Tele-Pod, and newer Gibraltar mounts that use the Tele-Pod head. Older Gibraltar mounts require a different encoder kit. Please verify your mount model before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs installation difficult? Do I need to drill any holes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward and does not require any permanent modification or drilling of your mount. The kit is designed to bolt on using existing attachment points. Tele Vue provides detailed instructions to guide you through the process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this kit add a lot of weight to my mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the entire kit is very lightweight, weighing only a few ounces. It will not noticeably affect the balance or smooth motion of your Tele Vue mount, preserving its grab-and-go portability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this a Go-To kit with motors?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is not a Go-To kit. It is a \"Push-To\" system that tells you where to point your telescope, but you move it manually. It does not include motors and cannot automatically track objects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this encoder kit with a non-Tele Vue DSC computer?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, these high-resolution encoders are compatible with most standard DSC computers on the market from manufacturers like Lumicon, JMI, and Celestron. You may need a different cable to connect the junction box to your specific computer model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Code\u003c\/td\u003e\n\u003ctd\u003eSTN-4001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEncoder Resolution\u003c\/td\u003e\n\u003ctd\u003e2160 steps per revolution (0.167° per step)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Compatibility\u003c\/td\u003e\n\u003ctd\u003eTele Vue Panoramic Mount, Tele-Pod Mount, Newer Gibraltar Mounts (with Tele-Pod head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSC Computer Compatibility\u003c\/td\u003e\n\u003ctd\u003eTele Vue Sky Tour, other standard DSC computers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 8 oz (227 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAltitude Encoder Assembly\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAzimuth Encoder Assembly\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMain Wiring Harness\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003ePigtail Harness\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eHarness Junction Box with Velcro\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eHardware Parts Bag (screws and Allen keys)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.televue.com\/images\/TV5_public\/instructions\/Mounts\/Encoder_install_STN-4001.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/tele-vue-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eTele Vue 5-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":51223882203421,"sku":"TV-STN-4001","price":574.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Tele_Vue_Pano-TelePod_Gib_Encoder_Kit_1.jpg?v=1777515027"},{"product_id":"explore-scientific-es-on-eq3-drive","title":"Explore Scientific Right Ascension Drive for EQ3 Mounts","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds automatic Right Ascension tracking to manual mounts\u003c\/li\u003e\n\u003cli\u003eKeeps celestial objects centered in the eyepiece\u003c\/li\u003e\n\u003cli\u003eIdeal for high-magnification planetary and lunar viewing\u003c\/li\u003e\n\u003cli\u003eCompatible with EQ3, Firstlight Exos Nano, and other mounts\u003c\/li\u003e\n\u003cli\u003eEnables more relaxed, comfortable observing sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eRight Ascension Drive for EQ3 Mounts\u003c\/h2\u003e\n\u003cp\u003eThis Right Ascension Drive transforms your manual German equatorial mount into an automatic tracking platform. By engaging a motor to match the Earth's rotation, it eliminates the need for constant manual adjustments via the slow-motion control knob. This simple upgrade keeps planets, star clusters, and nebulae perfectly centered in the eyepiece, allowing for longer, more detailed observations without interruption.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAutomated Sidereal Tracking for Visual Astronomy\u003c\/h3\u003e\n\u003cp\u003eOnce your mount is polar aligned, this RA drive takes over the most critical task in astronomy: tracking the sky. The motor turns the mount's Right Ascension axis at the sidereal rate, precisely counteracting the planet's rotation. This keeps your target from drifting out of view, a crucial advantage when observing at high magnification or when sharing the view with others.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSeamless Integration with EQ3-Class Mounts\u003c\/h3\u003e\n\u003cp\u003eThis motor drive is specifically designed for compatibility with a range of popular entry-level equatorial mounts. It provides a direct-fit upgrade for standard EQ3-style mounts, the Explore Scientific Firstlight Exos Nano, and the mounts included with the Explore Scientific ES-ON11444EQ3 and ES-ON13449EQ3 telescopes. Installation is straightforward, allowing you to quickly motorize your existing setup for a more rewarding observing experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main benefit of adding this RA drive to my EQ3 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary benefit is \u003cstrong\u003ehands-free tracking\u003c\/strong\u003e. Instead of constantly turning the manual slow-motion knob to keep an object in view, this motor does it for you. This makes observing much more comfortable, especially at high powers, and is essential if you want to share views with friends or family without having to re-center the object for each person.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this Right Ascension Drive fit my Explore Scientific ES-ON11444EQ3 telescope's mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this drive is designed to be compatible with the mount supplied with the Explore Scientific ES-ON11444EQ3 telescope, as well as the ES-ON13449EQ3 and the Firstlight Exos Nano mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this motor drive make my EQ3 mount a GoTo system?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is a single-axis tracking motor, not a GoTo system. It will track an object once you have manually located it in the sky, but it will not automatically slew the telescope to new targets. You will still use star charts or a planisphere to find objects yourself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does this RA drive improve observing Jupiter on my Firstlight Exos Nano mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eObserving planets like Jupiter requires high magnification to see details like its cloud bands and moons. At these powers, objects drift through the field of view very quickly. This RA drive automatically tracks Jupiter, keeping it centered so you can study it for extended periods without the distraction of making manual adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this RA drive for long-exposure astrophotography?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis type of drive is primarily intended for visual observation. While it can be used for short-exposure planetary or lunar imaging (webcam-style), it typically lacks the precision and multi-speed controls required for long-exposure deep-sky astrophotography of galaxies and nebulae.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs installation of the RA drive difficult on an EQ3 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is generally straightforward for users with basic mechanical aptitude. The drive is designed to bolt directly onto the mount's Right Ascension axis with minimal tools. The process typically involves attaching the motor bracket and coupling it to the worm gear shaft.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNote\u003c\/td\u003e\n\u003ctd\u003eDetailed specifications are not available for this product.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eContents Not Specified\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":52909293502749,"sku":"ES-ON-EQ3-Drive","price":182.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"explore-scientific-es-ascom-y","title":"Explore Scientific ES-ASCOM-Y Dual Plug Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects DB9 and USB Mini-B devices simultaneously to one computer\u003c\/li\u003e\n\u003cli\u003eEnables ASCOM control for Explore Scientific PMC-Eight systems\u003c\/li\u003e\n\u003cli\u003eFeatures an integrated FTDI chipset for reliable serial communication\u003c\/li\u003e\n\u003cli\u003eCompatible with EXOS2GT, Losmandy G11, and iEXOS series mounts\u003c\/li\u003e\n\u003cli\u003eBroad OS support for Windows, macOS, and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eExplore Scientific ES-ASCOM-Y Dual Plug Cable\u003c\/h2\u003e\n\u003cp\u003eThe Explore Scientific ES-ASCOM-Y Cable unifies control of your PMC-Eight system, connecting both legacy DB9 and modern USB Mini-B mounts to a single computer for ASCOM-driven sessions. This dual-plug Y-cable uses an integrated FTDI chipset for reliable COM port communication with mounts like the EXOS2GT and Losmandy G11, while simultaneously connecting iEXOS series mounts via its USB 2.0 Mini-B plug.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUnified ASCOM Control for PMC-Eight Systems\u003c\/h3\u003e\n\u003cp\u003eThis cable streamlines your imaging setup by eliminating the need for multiple adapters and cables. It allows you to control two different PMC-Eight-equipped mounts, one with a DB9 port and the other with a USB 2.0 Mini B port, from a single ASCOM-compatible software interface on your computer. This simplifies cable management at the mount and ensures a stable connection for remote control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe DB9 Connector: FTDI Chipset for Legacy Mounts\u003c\/h3\u003e\n\u003cp\u003eThe DB9 connector is built with an industry-leading FTDI chipset, which ensures stable, reliable communication by creating a standard Windows COM port. This is essential for controlling mounts like the EXOS2GT with PMC-Eight and the Losmandy G11 with PMC-Eight. The connection supports full RS-232 modem and data signals (DCD, TXD, RXD, DTR, GND, DSR, RTS, CTS, RI) for robust control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e The FTDI chipset supports a wide range of operating systems, including Windows (10\/8.1\/8\/7\/Vista\/XP\/2000), Mac OS X (10.6 and above), and Linux (2.4 or above).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe USB Mini-B Connector: Modern Mounts and 5V Power\u003c\/h3\u003e\n\u003cp\u003eThe second leg of the cable terminates in a USB 2.0 Mini B male connector, designed for modern mounts like the iEXOS series. This plug also provides a standard Windows COM port for seamless ASCOM integration. In addition to data, this connection can charge compatible 5-volt-DC devices, though some electronics may require a separate adapter not sold by Explore Scientific.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main purpose of the Explore Scientific ES-ASCOM-Y cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe ES-ASCOM-Y cable is designed to connect Explore Scientific's PMC-Eight OPENGoTo systems to a computer for control via ASCOM. Its dual-plug design allows you to simultaneously connect a mount using a DB9 serial port and another using a USB 2.0 Mini-B port, all through a single cable to your PC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich mounts are compatible with the DB9 plug on the ES-ASCOM-Y cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe DB9 plug, which features a reliable \u003cstrong\u003eFTDI chipset\u003c\/strong\u003e, is specifically for connecting the \u003cstrong\u003eEXOS2GT with PMC-Eight\u003c\/strong\u003e and the \u003cstrong\u003eLosmandy G11 with PMC-Eight\u003c\/strong\u003e to your computer's USB port for ASCOM control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich mounts use the USB Mini-B plug on the ES-ASCOM-Y cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe USB 2.0 Mini-B male connector is designed to connect the \u003cstrong\u003eiEXOS series of mounts\u003c\/strong\u003e to your computer for ASCOM control. It also provides 5V power for charging compatible devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the ES-ASCOM-Y cable require special drivers?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the cable uses an FTDI chipset to create virtual COM ports. While many modern operating systems like Windows 10, macOS, and Linux have built-in support, you may need to download the latest FTDI drivers to ensure proper installation and stable communication with your mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the ES-ASCOM-Y cable to control my Losmandy G11 with PMC-Eight from a laptop running Windows 10?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The cable's FTDI chipset is fully supported on Windows 10. Simply connect the DB9 plug to your mount and the main USB plug to your laptop, ensure the correct COM port is selected in your ASCOM driver, and you will have full GoTo control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I charge my phone with the USB Mini-B plug on the ES-ASCOM-Y cable while imaging with my iEXOS-100?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe USB Mini-B plug provides a 5-volt DC power output suitable for charging some devices. However, it is primarily intended for data connection to the mount. Charging a high-draw device like a modern smartphone may not be efficient, and you might need a specific adapter (e.g., Mini-B to USB-C) which is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e8118030330782\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDual plug (DB9 FTDI and USB 2.0 Mini B) Y-Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/explore-scientific-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eExplore Scientific Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Explore Scientific","offers":[{"title":"Default Title","offer_id":52909303464221,"sku":"ES-ASCOM-Y","price":49.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ExploreScientific-Dual-plug-DB9-FTDI-chipset-and-USB-2-0-Mini-B-1_3057ef8d-acbd-4cf6-b056-0e7cafabcb13.jpg?v=1789061144"},{"product_id":"ioptron-8411","title":"iOptron Go2Nova® 8411 Handset","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e8-line, 21-character high-contrast OLED display\u003c\/li\u003e\n\u003cli\u003eInternal database with approximately 212,000 objects\u003c\/li\u003e\n\u003cli\u003eResponsive 32-bit ARM processor\u003c\/li\u003e\n\u003cli\u003e9-speed slew control for precise centering\u003c\/li\u003e\n\u003cli\u003eFirmware upgradeable via a modern USB-C port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron Go2Nova® 8411 Handset\u003c\/h2\u003e\n\u003cp\u003eThe iOptron Go2Nova® Handset 8411 upgrades your mount control with a comprehensive database of approximately 212,000 celestial objects and a responsive 32-bit ARM CPU for swift menu navigation. Its bright 8-line, 21-character OLED display remains perfectly readable in cold conditions down to -10ºC, ensuring you never lose your place in the sky. Nine distinct control speeds, from 1x sidereal to MAX, provide precise centering on any target, while the integrated USB-C port allows for simple, future-proof firmware updates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 212,000-Object Database for Effortless Navigation\u003c\/h3\u003e\n\u003cp\u003eAt the core of the Go2Nova 8411 is an expansive celestial database containing approximately 212,000 objects. This library goes far beyond the standard Messier and Caldwell catalogs, giving you instant access to thousands of NGC, IC, and SAO targets. Whether you're hunting for faint galaxies or splitting obscure double stars, the handset's GoTo command will slew your telescope directly to your chosen object with dependable accuracy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e8-Line OLED Display for Readability in All Conditions\u003c\/h3\u003e\n\u003cp\u003eThe handset features a large 8-line, 21-character OLED screen that provides superior contrast and readability compared to traditional red-backlit LCDs. This is a critical advantage during cold nights, as the OLED technology is rated to operate flawlessly down to -10ºC without the slow refresh rates that plague liquid crystal displays. The generous screen space shows more menu information at once, reducing the need for excessive scrolling while navigating star catalogs or changing mount settings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e32-bit ARM CPU and USB-C for Future-Proofing\u003c\/h3\u003e\n\u003cp\u003ePowered by a 32-bit ARM processor, the Go2Nova 8411 feels immediately responsive, from browsing the object database to executing alignment procedures. This modern CPU architecture eliminates the input lag found in older handsets. For long-term viability, iOptron has equipped the 8411 with a USB-C port, making firmware updates straightforward from any modern computer and ensuring your handset can support new features and improved tracking algorithms for years to come.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich iOptron mounts are compatible with the Go2Nova® 8411 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova® 8411 is the standard handset for many modern iOptron GoTo mounts. However, because firmware and hardware specifications can change, it is essential to \u003cstrong\u003everify compatibility with your specific mount model\u003c\/strong\u003e before purchasing. Consult your mount's manual or the official iOptron product page for the most accurate compatibility information.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the 9-speed control on the Go2Nova® 8411 help when centering a target like Jupiter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 9-speed control on the Go2Nova® 8411 gives you precise command over the telescope's movement. You can use the MAX speed to slew across the sky, then switch to intermediate speeds like 128x or 64x for coarse centering. To place Jupiter perfectly in the center for high-magnification viewing, the 2x or 8x speeds allow for fine, deliberate adjustments without overshooting your target.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the advantage of the Go2Nova® 8411's OLED display over a traditional LCD?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantage of the OLED display is its performance in cold weather and its superior contrast. Unlike LCDs, which can become sluggish or fade below freezing, the Go2Nova® 8411's screen is rated for operation down to \u003cstrong\u003e-10ºC\u003c\/strong\u003e. Additionally, since each pixel generates its own light, the OLED provides a true black background, making the red text appear sharper and easier to read without compromising your night vision.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWith ~212,000 objects, what can I find with the Go2Nova® 8411 beyond the Messier catalog?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova® 8411's database includes a vast array of celestial objects for dedicated observers. Beyond the 110 Messier objects, you can explore:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe complete NGC and IC catalogs:\u003c\/strong\u003e Thousands of galaxies, nebulae, and star clusters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAO Catalog:\u003c\/strong\u003e A comprehensive list of bright stars for alignment and reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable and Double Stars:\u003c\/strong\u003e Dedicated catalogs for specialized observing projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar System Objects:\u003c\/strong\u003e Planets, comets, and asteroids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the Go2Nova® 8411 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eUpdating the firmware is done through the handset's built-in \u003cstrong\u003eUSB-C port\u003c\/strong\u003e. You will need to download the latest firmware file and the iOptron Upgrade Utility from the iOptron website. Connect the handset to your computer with a USB-C cable, run the utility, and follow the on-screen instructions to load the new firmware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Go2Nova® 8411 handset to track a satellite with my CEM40 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the Go2Nova® 8411 handset, when paired with a compatible mount like the iOptron CEM40, supports satellite tracking. You will need to load the satellite's orbital parameters (TLE data) into the handset. Once loaded, you can select the satellite from a menu, and the mount will automatically slew to and track it as it passes overhead.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e8-line, 21-character OLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPU\u003c\/td\u003e\n\u003ctd\u003e32-bit ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e~212,000 objects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Speeds\u003c\/td\u003e\n\u003ctd\u003e9 speeds (1x, 2x, 8x, 16x, 64x, 128x, 256x, 512x, MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Upgrade Port\u003c\/td\u003e\n\u003ctd\u003eUSB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Temperature\u003c\/td\u003e\n\u003ctd\u003e-10ºC ~ 45ºC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eGo2Nova® 8411 Handset\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron_HC_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917272871197,"sku":"IOP-8411","price":405.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8411-1_92ab45ee-a308-4c92-8597-279f3aa58f4b.jpg?v=1789141642"},{"product_id":"ioptron-8401","title":"iOptron Go2Nova® Handset 8401","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eGoToNova® database with over 120,000 celestial objects\u003c\/li\u003e\n\u003cli\u003eLarge 8-line backlit LCD for clear menu navigation\u003c\/li\u003e\n\u003cli\u003e9 slew speeds for precise centering and rapid slewing\u003c\/li\u003e\n\u003cli\u003e32-bit ARM processor for fast calculations\u003c\/li\u003e\n\u003cli\u003eUSB port for firmware updates and ASCOM computer control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron Go2Nova® Handset 8401\u003c\/h2\u003e\n\u003cp\u003eThe iOptron Go2Nova® Handset 8401 is a powerful GoTo controller that puts a celestial database of over 120,000 objects directly into your hands, driven by a 32-bit ARM CPU for responsive performance. Its large, backlit 8-line display provides more information at a glance than smaller screens, while 9 distinct slew speeds—from 1x for fine adjustments to MAX for rapid repositioning—give you complete control over your iOptron mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe GoToNova 120,000+ Object Database\u003c\/h3\u003e\n\u003cp\u003eAt the core of the 8401 handset is the comprehensive GoToNova database, containing over 120,000 objects. This extensive catalog goes far beyond the standard Messier and Caldwell lists, including vast selections from the NGC, IC, and other catalogs, ensuring you always have a new target to explore. This makes the handset a complete, field-ready solution that doesn't require an external planetarium app for a full night of observing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e8-Line Display and 9-Speed Slew Control\u003c\/h3\u003e\n\u003cp\u003eThe user interface is designed for clarity and precision in the dark. The backlit 8-line LCD shows multiple lines of menu text and object data simultaneously, minimizing the need to scroll through screens. You can precisely center any object using the 9 available slew speeds, from the ultra-fine 1x and 2x sidereal rates to the rapid 512x and MAX speeds for moving across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eASCOM Control and Firmware Upgrades via USB\u003c\/h3\u003e\n\u003cp\u003eA built-in USB port transforms the Go2Nova 8401 from a simple hand controller into a bridge for advanced computer control. This port allows for a direct, wired connection to a PC, enabling full ASCOM-compatible control from your favorite planetarium or imaging software. The USB connection also facilitates firmware upgrades, allowing you to load the latest object catalogs and feature enhancements from iOptron, keeping your system current for years to come.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of information does the Go2Nova 8401's 8-line display show during a GoTo?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe large 8-line display shows the object's name and catalog number, its Right Ascension and Declination coordinates, and its apparent magnitude, all at the same time. This provides a complete data summary without forcing you to scroll through multiple screens before initiating a slew.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the 120,000+ object database in the Go2Nova 8401 help beyond finding targets like the Andromeda Galaxy (M31)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile it contains all popular objects, the extensive \u003cstrong\u003e120,000+ object database\u003c\/strong\u003e is ideal for exploring beyond the familiar. It includes thousands of lesser-known galaxies, star clusters, and nebulae from the NGC and IC catalogs, as well as extensive star lists. This allows you to go \"off the beaten path\" and discover challenging new targets from any observing site.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I control my iOptron mount with a computer using the Go2Nova 8401 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Go2Nova 8401 handset features a \u003cstrong\u003eUSB port\u003c\/strong\u003e that allows it to serve as an interface between your mount and a computer. It is fully \u003cstrong\u003eASCOM compatible\u003c\/strong\u003e, so you can control your mount directly from popular astronomy software like N.I.N.A., Sequence Generator Pro, Stellarium, or Cartes du Ciel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the 9 different slew speeds on the Go2Nova 8401?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003e9 slew speeds\u003c\/strong\u003e give you precise control for any task.\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow Speeds (1x, 2x, 8x):\u003c\/strong\u003e Perfect for making fine adjustments to center an object in a high-magnification eyepiece or on a small camera sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Speeds (16x, 64x, 128x):\u003c\/strong\u003e Useful for scanning small regions of the sky or moving between close targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Speeds (256x, 512x, MAX):\u003c\/strong\u003e Used for GoTo slews to move the telescope quickly from one part of the sky to another.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the Go2Nova 8401 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFirmware updates are performed using the built-in \u003cstrong\u003eUSB port\u003c\/strong\u003e. You can download the latest firmware from the iOptron website and use their utility software to load it onto the handset. This ensures your controller has the most up-to-date object database and operational improvements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhen slewing to a faint object like the Horsehead Nebula (B33) with the Go2Nova 8401, which slew speeds are best for final centering?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAfter the initial high-speed GoTo slew gets you to the vicinity of the Horsehead Nebula (B33), you should switch to the slower speeds for centering. Using the \u003cstrong\u003e8x or 16x speeds\u003c\/strong\u003e will help you frame the object correctly, and then the \u003cstrong\u003e1x or 2x speeds\u003c\/strong\u003e are ideal for placing the faint nebula perfectly in the field of view of your eyepiece or camera without overshooting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003eGoToNova® (\u0026gt;120,000 objects)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003e32-bit ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLCD Display\u003c\/td\u003e\n\u003ctd\u003e8-line, Backlit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew Speeds\u003c\/td\u003e\n\u003ctd\u003e9 speeds (1x, 2x, 8x, 16x, 64x, 128x, 256x, 512x, MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Port\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Control\u003c\/td\u003e\n\u003ctd\u003eYes (via USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Protocol\u003c\/td\u003e\n\u003ctd\u003eASCOM Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Upgradeable\u003c\/td\u003e\n\u003ctd\u003eYes (via USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eGo2Nova® 8401 Hand Controller\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron_HC_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Telescope and 1-Year Accessory Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917303410973,"sku":"IOP-8401","price":461.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8401-1_b8b0b567-35e7-42f2-8521-1dd1b87467fa.jpg?v=1789142390"},{"product_id":"ioptron-8405","title":"iOptron Go2Nova® Handset 8405","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eGOTONOVA® database with over 14,000 objects\u003c\/li\u003e\n\u003cli\u003eBacklit 4-line, 21-character LCD display\u003c\/li\u003e\n\u003cli\u003e5 slewing speeds for precise control\u003c\/li\u003e\n\u003cli\u003ePowered by a 32-bit ARM processor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron Go2Nova® Handset 8405\u003c\/h2\u003e\n\u003cp\u003eWith the iOptron Go2Nova® Handset 8405, you command a database of over 14,000 celestial objects using a responsive 32-bit ARM processor. All target information appears clearly on the backlit, 4-line, 21-character display, and centering is controlled with 5 distinct slew speeds, from MAX for GoTo slews down to 2X for fine adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eGoTo Navigation: A 14,000+ Object Database at Your Fingertips\u003c\/h3\u003e\n\u003cp\u003eThe core of the Go2Nova 8405 is its extensive GOTONOVA® database, which includes over 14,000 deep-sky objects, stars, and solar system targets. The handset's 32-bit ARM processor ensures quick, lag-free access to catalogs like Messier, NGC, and IC. At night, the backlit 4-line, 21-character LCD remains perfectly readable without compromising your dark adaptation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePrecision Slewing: 5 Speeds for Accurate Centering\u003c\/h3\u003e\n\u003cp\u003eThe Go2Nova 8405 gives you granular control over your mount's movement with 5 selectable speeds. Use the MAX speed for rapid GoTo slewing across the sky. Once the target is in the finder scope, switch to 256X or 64X to bring it into the eyepiece field, then use the 8X and 2X speeds for final, precise centering of planets or tight double stars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the database size of the iOptron Go2Nova 8405 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova® 8405 handset is equipped with the GOTONOVA® database, which contains \u003cstrong\u003eover 14,000 celestial objects\u003c\/strong\u003e, including galaxies, nebulae, star clusters, and solar system bodies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the available slew speeds on the Go2Nova 8405?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe handset offers \u003cstrong\u003e5 different control speeds\u003c\/strong\u003e to give you precise control over your mount. The available speeds are 2X, 8X, 64X, 256X, and MAX (maximum slew speed of the connected mount).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of display does the Go2Nova 8405 use?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova 8405 features a \u003cstrong\u003ebacklit, 4-line, 21-character LCD display\u003c\/strong\u003e. The backlighting ensures readability in dark conditions, while the multi-line display shows comprehensive information about the selected object and mount status.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat processor powers the Go2Nova 8405?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe handset is driven by a \u003cstrong\u003e32-bit ARM processor\u003c\/strong\u003e, which ensures responsive performance when browsing the extensive object database or issuing commands to the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow would I use the Go2Nova 8405's slew speeds to center a planet like Jupiter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAfter performing a GoTo to Jupiter, you would use the faster speeds (256X or 64X) to move the planet from the edge of the eyepiece view to the center. Then, you would switch to the slowest speeds (8X and 2X) to make fine adjustments, perfectly centering Jupiter for high-magnification viewing or imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eAfter slewing to the Hercules Cluster (M13) with the Go2Nova 8405, how does the display help me?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOnce the GoTo is complete, the 4-line, 21-character display on the Go2Nova 8405 will show the object's designation (M13), its catalog number, and other relevant data. This provides immediate confirmation that the mount is pointing at the correct target before you even look through the eyepiece.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eBacklit 4-line, 21-character LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003e32-bit ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew Speeds\u003c\/td\u003e\n\u003ctd\u003e5 Speeds (2X, 8X, 64X, 256X, and MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003eGOTONOVA® (over 14,000 objects)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eGo2Nova® 8405 Handset\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron_HC_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917303673117,"sku":"IOP-8405","price":245.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8405-1_081fef3e-08a9-4dfd-8b27-3be8b5bb3f46.jpg?v=1789142400"},{"product_id":"ioptron-8407","title":"iOptron Go2Nova® 8407+ Hand Controller","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e~212,000 Object GoTo Database\u003c\/li\u003e\n\u003cli\u003eLarge 8-line, 21-character backlit LCD screen\u003c\/li\u003e\n\u003cli\u003e9 slew speeds for precise centering\u003c\/li\u003e\n\u003cli\u003eInternal heater for operation down to -20°C\u003c\/li\u003e\n\u003cli\u003e32-bit ARM processor for responsive control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron Go2Nova® 8407+ Hand Controller\u003c\/h2\u003e\n\u003cp\u003eThe iOptron Go2Nova® 8407+ Hand Controller combines a massive ~212,000 object database with a fast 32-bit ARM processor for immediate access to the night sky. Its large, back-lit 8-line, 21-character display provides comprehensive object data at a glance, while the 9 available slew speeds give you precise pointing control from rapid GoTo slewing to fine centering. Designed for serious field use, the Go2Nova 8407+ features an internal heater, ensuring the LCD remains responsive and readable in temperatures as low as -20°C.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA ~212,000 Object Database on an 8-Line Display\u003c\/h3\u003e\n\u003cp\u003eNavigating the cosmos is faster when you can see more information at once. The Go2Nova 8407+ handset's 8-line display shows significantly more data than typical 2-line controllers, reducing the need to scroll through menus to confirm coordinates or object details. The onboard 32-bit ARM CPU powers through the ~212,000 object database, providing snappy searches and responsive menu navigation so you spend more time observing and less time waiting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e9-Speed Control for Precision Slewing and Centering\u003c\/h3\u003e\n\u003cp\u003eThe Go2Nova 8407+ gives you granular control over your mount's movement with 9 distinct speeds. Use the MAX speed for quick GoTo slews between targets, then drop to intermediate speeds like 128x or 256x for coarse centering in the finderscope. For final positioning at high magnification, the 1x, 2x, and 8x speeds allow you to place planets or double stars precisely in the center of your eyepiece field of view.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eInternal Heater for Reliable Operation Down to -20°C\u003c\/h3\u003e\n\u003cp\u003eCold weather is the enemy of standard liquid crystal displays, causing them to become sluggish or unreadable. The Go2Nova 8407+ solves this with an integrated internal heater that maintains optimal LCD function in temperatures from 40°C all the way down to a frigid -20°C. This makes the 8407+ a critical upgrade for astronomers who observe year-round in cold climates, ensuring your GoTo system remains your most reliable tool on a clear winter night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat iOptron mounts are compatible with the Go2Nova 8407+ handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova 8407+ is the standard controller for many modern iOptron GoTo mounts. It serves as a direct replacement or upgrade for compatible systems. Always consult your specific mount's documentation to confirm handset compatibility before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the 8-line display on the 8407+ help when searching for faint objects like the Veil Nebula (NGC 6960)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe larger display shows more object data simultaneously, such as coordinates, magnitude, and size, without forcing you to scroll through multiple screens. This allows you to quickly verify that you are targeting the correct object and celestial coordinates before initiating a slew, which is especially helpful for large, faint targets or crowded star fields.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the internal heater in the Go2Nova 8407+ controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe internal heater prevents the \u003cstrong\u003eback-lit 8-line LCD screen\u003c\/strong\u003e from freezing, slowing down, or becoming unreadable in cold weather. This ensures reliable and responsive operation in temperatures down to \u003cstrong\u003e-20°C\u003c\/strong\u003e, making it an essential tool for observers in northern latitudes or at high altitudes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm trying to center Jupiter with my CEM40 mount. Which of the 9 slew speeds on the 8407+ should I use?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAfter the initial GoTo slew, use the medium speeds (e.g., \u003cstrong\u003e64x\u003c\/strong\u003e or \u003cstrong\u003e128x\u003c\/strong\u003e) to bring the planet into the center of the field. For precise final positioning to study features like the Great Red Spot or individual Galilean moons, switch to the slowest speeds (\u003cstrong\u003e1x, 2x, or 8x\u003c\/strong\u003e) for fine, controlled adjustments without overshooting your target.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the Go2Nova 8407+ handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFirmware updates for the Go2Nova 8407+ are performed through the mount, not the handset directly. You must connect your mount to a PC via its \u003cstrong\u003eRS232 serial port\u003c\/strong\u003e and use the appropriate iOptron firmware upgrade utility, which can be downloaded from the iOptron website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the ~212,000 object database in the 8407+ include alignment stars?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The database contains a comprehensive catalog of stars for alignment procedures in addition to a vast collection of deep-sky objects (Messier, NGC, IC), planets, the Moon, and the Sun (with a proper solar filter). The \u003cstrong\u003e32-bit ARM processor\u003c\/strong\u003e ensures quick access to any object in the catalog.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGOTO Controller\u003c\/td\u003e\n\u003ctd\u003eGo2Nova® 8407+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003e32-bit ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eBack-lit 8-line, 21-character LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e~212,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew Speeds\u003c\/td\u003e\n\u003ctd\u003e9 selectable speeds (1x, 2x, 8x, 16x, 64x, 128x, 256x, 512x, MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Upgradeable\u003c\/td\u003e\n\u003ctd\u003eYes, via RS232 port on mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-20°C to 40°C (Internal Heater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eGo2Nova® 8407+ Hand Controller\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron Warranty Policy\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917304164637,"sku":"IOP-8407+","price":461.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8407-1_0d2064d6-c594-4589-ab4f-1a67c9579b80.jpg?v=1789142413"},{"product_id":"ioptron-8408","title":"iOptron Go2Nova® 8408 Hand Controller","description":"\u003cul class=\"DAV-feature-list\"\u003e\n  \u003cli\u003eBacklit 4-line, 21-character LCD display\u003c\/li\u003e\n  \u003cli\u003e50,000+ or 150,000+ object database depending on mount\u003c\/li\u003e\n  \u003cli\u003e9 distinct slew speeds for precise control\u003c\/li\u003e\n  \u003cli\u003e32-bit ARM processor\u003c\/li\u003e\n  \u003cli\u003eASCOM compatible for computer control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n  \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n  \u003cli\u003eFAQ\u003c\/li\u003e\n  \u003cli\u003eSpecifications\u003c\/li\u003e\n  \u003cli\u003eIn the Box\u003c\/li\u003e\n  \u003cli\u003eDownloads\u003c\/li\u003e\n  \u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n  \u003cli class=\"active\"\u003e\n    \u003cdiv\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section-center\"\u003e\n          \u003ch2\u003eiOptron Go2Nova® 8408 Hand Controller\u003c\/h2\u003e\n          \u003cp\u003eThe iOptron Go2Nova® 8408 Hand Controller is powered by a 32-bit ARM processor and presents all information on a large, backlit 4-line, 21-character LCD. With a deep object database of over 50,000 or 150,000 objects, depending on your mount, and 9 different slew speeds, you have precise and comprehensive control over your observing or imaging session right at your fingertips.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eThe GoToNova 50,000+ Object Database\u003c\/h3\u003e\n          \u003cp\u003eAt the core of the Go2Nova 8408 is a comprehensive celestial catalog. For ZEQ25 mount users, the controller holds a database of over 50,000 objects, while CEM25 users gain access to an expanded library of over 150,000 objects. This extensive database includes everything from planets and Messier objects to thousands of NGC, IC, and UGC catalog entries, ensuring your next target is always just a few button presses away.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eA 4-Line Backlit Display and 9 Slew Speeds\u003c\/h3\u003e\n          \u003cp\u003eNavigating the night sky requires clear information and precise control. The 8408 handset features a large, backlit 4-line, 21-character display that shows more information at once, reducing the need to scroll through menus. You can move your telescope with exceptional accuracy using the 9 available slew speeds, from the imperceptible 1x sidereal rate for centering in a high-power eyepiece to the rapid MAX speed for moving across the entire sky.\u003c\/p\u003e\n          \u003cul\u003e\n            \u003cli\u003e\n\u003cstrong\u003eFine Centering Speeds:\u003c\/strong\u003e The 1x, 2x, and 8x speeds allow for deliberate, high-magnification adjustments without overshooting your target.\u003c\/li\u003e\n            \u003cli\u003e\n\u003cstrong\u003eMid-Range Speeds:\u003c\/strong\u003e Use 16x, 64x, and 128x for centering objects in a finder scope or making larger corrections.\u003c\/li\u003e\n            \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Slewing:\u003c\/strong\u003e The 256x, 512x, and MAX speeds quickly move the mount between distant celestial objects.\u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003e32-bit ARM CPU for ASCOM Control and Firmware Upgrades\u003c\/h3\u003e\n          \u003cp\u003eThe Go2Nova 8408 is built around a modern 32-bit ARM processor, providing the speed and memory needed for advanced functionality. Through its integrated serial port, the handset is fully ASCOM compatible, allowing you to connect it to a PC and control your iOptron mount with popular planetarium or imaging software. This connection also allows for firmware upgrades, ensuring your controller remains current with iOptron's latest features and object catalog updates. A standard serial-to-USB adapter may be required for modern laptops lacking a native serial port.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eGo2Nova 8408 vs. Celestron NexStar+: A Quick Comparison\u003c\/h3\u003e\n          \u003cp\u003eWhen choosing a GoTo system, the hand controller is your primary interface. The Go2Nova 8408 offers several key advantages over the standard Celestron NexStar+ controller.\u003c\/p\u003e\n          \u003cul\u003e\n            \u003cli\u003e\n\u003cstrong\u003eCelestron's Advantage:\u003c\/strong\u003e The NexStar+ controller is widely used and features a familiar button layout that many observers are accustomed to.\u003c\/li\u003e\n            \u003cli\u003e\n\u003cstrong\u003eGo2Nova's Display:\u003c\/strong\u003e The 8408 features a 4-line, 21-character display, which shows significantly more information at a glance compared to the 2-line, 16-character screen on the NexStar+.\u003c\/li\u003e\n            \u003cli\u003e\n\u003cstrong\u003eGo2Nova's Database:\u003c\/strong\u003e With 50,000+ to 150,000+ objects, the Go2Nova database is larger than the ~40,000 objects found in the standard NexStar+ controller, offering more built-in targets for exploration.\u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat iOptron mounts use the Go2Nova 8408 handset?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eThe Go2Nova 8408 hand controller is specified for use with iOptron's \u003cstrong\u003eZEQ25\u003c\/strong\u003e and \u003cstrong\u003eCEM25\u003c\/strong\u003e series of equatorial mounts. The object database size differs between the two, with over 50,000 for the ZEQ25 and over 150,000 for the CEM25.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the Go2Nova 8408?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eYou can update the firmware on the 8408 handset via its built-in \u003cstrong\u003eserial port\u003c\/strong\u003e. This requires connecting the controller to a PC (using a serial cable and potentially a USB-to-serial adapter) and using the firmware upgrade utility available from the iOptron support website.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I control my CEM25 mount with a computer using the 8408 handset?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eYes. The Go2Nova 8408 is \u003cstrong\u003eASCOM compatible\u003c\/strong\u003e. By connecting the handset's serial port to your computer, you can use any ASCOM-compliant software, such as planetarium programs or imaging suites like N.I.N.A. or Sequence Generator Pro, to control your mount's GoTo and tracking functions.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat's the benefit of the 9 slew speeds on the Go2Nova 8408?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eThe 9 slew speeds provide precise control for any situation. The slowest speeds (\u003cstrong\u003e1x, 2x, 8x\u003c\/strong\u003e) are essential for carefully centering an object on an imaging sensor or in a high-power eyepiece. The fastest speed (\u003cstrong\u003eMAX\u003c\/strong\u003e) moves the mount quickly between targets, while the mid-range speeds are useful for aligning the mount or centering objects in a finder.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Go2Nova 8408 help me find faint objects like the Veil Nebula (NGC 6960) with my CEM25 mount?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eFinding faint, extended objects like the Veil Nebula (NGC 6960) is simple with the 8408 controller. After performing a star alignment, you can access the controller's \u003cstrong\u003e150,000+ object database\u003c\/strong\u003e, select NGC 6960 from the catalog, and the mount will automatically slew to place the nebula in your eyepiece's field of view.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eIf I'm imaging Jupiter with my ZEQ25, which slew speeds on the 8408 are best for centering the planet?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eFor planetary imaging of Jupiter, precise centering is critical. Once the GoTo system has placed Jupiter in your field of view, you should use the slowest slew speeds—typically \u003cstrong\u003e2x or 8x\u003c\/strong\u003e—to make the final adjustments and position the planet perfectly on your camera's small sensor without overshooting.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ctable class=\"DAV-specifications\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eLCD Display\u003c\/td\u003e\n          \u003ctd\u003eBacklit 4-line, 21-character\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProcessor\u003c\/td\u003e\n          \u003ctd\u003e32-bit ARM\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSlew Speeds\u003c\/td\u003e\n          \u003ctd\u003e9 speeds (1x, 2x, 8x, 16x, 64x, 128x, 256x, 512x, MAX)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eObject Database\u003c\/td\u003e\n          \u003ctd\u003e50,000+ (for ZEQ25) or 150,000+ (for CEM25)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSerial Port\u003c\/td\u003e\n          \u003ctd\u003eYes\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFirmware Upgradeable\u003c\/td\u003e\n          \u003ctd\u003eYes, via serial port\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePC Control\u003c\/td\u003e\n          \u003ctd\u003eYes, via serial port\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePC Protocol\u003c\/td\u003e\n          \u003ctd\u003eASCOM compatible\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cul class=\"DAV-grid\"\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\n        \u003cdiv\u003e\n          \u003cp class=\"DAV-item-title\"\u003eGo2Nova® 8408 Hand Controller\u003c\/p\u003e\n          \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n        \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron_CEM25_Manual.pdf\" target=\"_blank\"\u003e\n          \u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n            \u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\n          \u003c\/svg\u003e\n          \u003cdiv\u003e\n            \u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n          \u003c\/div\u003e\n        \u003c\/a\u003e\n      \u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917305344285,"sku":"IOP-8408","price":305.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8408-1_07ec8e05-b7d2-43bf-b27a-daf00f37218c.jpg?v=1789142428"},{"product_id":"ioptron-8409","title":"iOptron Go2Nova® Handset 8409","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e~212,000 object GoTo database\u003c\/li\u003e\n\u003cli\u003eIntegrated Wi-Fi for wireless control\u003c\/li\u003e\n\u003cli\u003eBacklit 4-line, 21-character LCD\u003c\/li\u003e\n\u003cli\u003e9-speed motor control\u003c\/li\u003e\n\u003cli\u003eASCOM compatible for PC control via USB or Wi-Fi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eGo2Nova® Handset 8409\u003c\/h2\u003e\n      \u003cp\u003eThe iOptron Go2Nova® Handset 8409 modernizes mount control with a comprehensive database of ~212,000 celestial objects and a responsive 32-bit ARM processor. Its backlit 4-line, 21-character LCD provides clear navigational feedback, while 9 distinct control speeds allow for precise centering and fast slewing across the sky. With both USB and Wi-Fi built-in, the 8409 handset delivers full, ASCOM-compatible computer control without the need for additional adapters.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eA ~212,000 Object Database for GoTo Navigation\u003c\/h3\u003e\n      \u003cp\u003eAt the core of the Go2Nova 8409 is its extensive celestial database containing approximately 212,000 objects. This catalog enables you to automatically slew to planets, stars, and thousands of deep-sky targets from the Messier, NGC, and IC catalogs with just a few button presses. The 32-bit ARM processor ensures that database searches and GoTo calculations are executed quickly, minimizing your wait time between targets.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003e9-Speed Control on a 4-Line Backlit Display\u003c\/h3\u003e\n      \u003cp\u003eThe Go2Nova 8409 gives you granular control over your mount's movement. With 9 available speeds, you can switch from a rapid MAX-rate slew across the sky down to a fine 1X sidereal rate for centering a faint galaxy in the eyepiece. All information, from your target coordinates to alignment status, is clearly presented on the backlit 4-line, 21-character display, ensuring readability in complete darkness.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n    \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eASCOM Control via Integrated USB \u0026amp; WiFi\u003c\/h3\u003e\n      \u003cp\u003eThis handset eliminates the need for extra cables and adapters for computer control. The Go2Nova 8409 is fully ASCOM compatible, allowing direct connection to your PC or laptop via its USB port. For even greater convenience, the built-in Wi-Fi lets you control your mount wirelessly from a tablet or smartphone running compatible planetarium software, creating a clean, cable-free setup in the field.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eGo2Nova 8409 vs. Previous Generation Handsets: Why WiFi Matters\u003c\/h3\u003e\n      \u003cp\u003eThe primary advantage of the 8409 handset over older models is the integration of Wi-Fi. Previous controllers often required a separate, external Wi-Fi adapter to achieve wireless functionality, adding another piece of gear to manage and power. The 8409's built-in Wi-Fi streamlines your imaging or observing session, allowing for robust, cable-free control right out of the box.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eLarger Database:\u003c\/strong\u003e The ~212,000 object database is significantly larger than that of older iOptron controllers, providing more built-in targets to explore.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eDirect Firmware Updates:\u003c\/strong\u003e The USB port simplifies the process of updating the handset's firmware, ensuring you always have the latest features and bug fixes from iOptron.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eStreamlined Operation:\u003c\/strong\u003e By integrating Wi-Fi, the 8409 reduces setup complexity and potential failure points compared to systems relying on external dongles.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat iOptron mounts are compatible with the Go2Nova 8409 handset?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe Go2Nova 8409 is designed for specific modern iOptron mounts. Because compatibility can vary, it is crucial to \u003cstrong\u003echeck your mount's product page or manual\u003c\/strong\u003e to confirm that the 8409 handset is listed as a compatible or replacement controller before purchasing.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Go2Nova 8409's ~212,000 object database improve observing?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe large database provides immediate access to a vast number of targets beyond the standard Messier and Caldwell catalogs. This is especially useful for exploring less common objects like those in the NGC, IC, and UGC catalogs, or for locating specific variable stars and double stars without needing an external computer.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I control my mount with a planetarium program like Stellarium using the Go2Nova 8409?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. The Go2Nova 8409 is \u003cstrong\u003eASCOM compatible\u003c\/strong\u003e. By installing the appropriate iOptron ASCOM driver on your computer, you can connect to the handset via USB or Wi-Fi and control your mount directly from most popular planetarium or imaging software.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the Go2Nova 8409's 9 slew speeds when observing Jupiter?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eWhen observing Jupiter at high magnification, you can use the faster speeds (like 256X or 512X) to quickly move the planet into the field of view. You would then switch to the slower speeds (like 8X, 2X, or 1X) to make very fine adjustments, perfectly centering the planet to study features like the Great Red Spot or its Galilean moons without overshooting.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eI want to image the Andromeda Galaxy (M31) with my iOptron mount. How does the Go2Nova 8409's WiFi help?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe Go2Nova 8409's built-in Wi-Fi allows you to control your mount from a comfortable location away from the telescope, such as inside your house or car. You can use planetarium software on a tablet to initiate the slew to M31, then use imaging software to make fine framing adjustments wirelessly, which is ideal for cold nights and reduces the risk of bumping the telescope during setup.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the Go2Nova 8409 handset?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eFirmware updates are performed via the handset's \u003cstrong\u003eUSB port\u003c\/strong\u003e. You will need to download the latest firmware file and the iOptron Upgrade Utility software from the iOptron website. Connect the handset to your computer with a USB cable and follow the instructions provided with the utility to complete the upgrade.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCPU\u003c\/td\u003e\n\u003ctd\u003e32-bit ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eLCD Display\u003c\/td\u003e\n\u003ctd\u003eBacklit 4-line, 21-character\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e~212,000 objects\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSlew Speeds\u003c\/td\u003e\n\u003ctd\u003e9 speeds (1X, 2X, 8X, 16X, 64X, 128X, 256X, 512X, MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eUSB Port\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eWi-Fi\u003c\/td\u003e\n\u003ctd\u003eYes, integrated\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eComputer Control\u003c\/td\u003e\n\u003ctd\u003eYes, via USB \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eASCOM compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eFirmware Upgradeable\u003c\/td\u003e\n\u003ctd\u003eYes, via USB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917305835805,"sku":"IOP-8409","price":349.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8409-1_e60c30e7-5ced-4293-a1dc-2079980d1c61.jpg?v=1789142444"},{"product_id":"ioptron-8409v2","title":"iOptron Go2Nova® Handset 8409V2 for select Strain Wave Gear Mounts","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e4-line, 21-character backlit LCD for clear night-time viewing\u003c\/li\u003e\n\u003cli\u003eExtensive GoToNova database with approximately 212,000 celestial objects\u003c\/li\u003e\n\u003cli\u003e9 distinct slew speeds for precise centering and rapid slewing\u003c\/li\u003e\n\u003cli\u003ePowered by a responsive 32-bit ARM processor\u003c\/li\u003e\n\u003cli\u003eIntegrated USB and Wi-Fi for firmware updates and computer control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eGo2Nova® Handset 8409V2 for select Strain Wave Gear Mounts\u003c\/h2\u003e\n\u003cp\u003eThe Go2Nova® Handset 8409V2 is the command center for select iOptron Strain Wave Gear mounts, driven by a 32-bit ARM processor and featuring a vast database of approximately 212,000 objects. Its backlit, 4-line, 21-character display provides clear feedback, while 9 variable slew speeds allow for both rapid repositioning and fine-tuned centering. With integrated USB and Wi-Fi, this handset enables full ASCOM-compatible computer control and ensures your mount's firmware stays current.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 212,000+ Object GoToNova Database\u003c\/h3\u003e\n\u003cp\u003eAt the core of the 8409V2 handset is iOptron's comprehensive GoToNova database, containing approximately 212,000 celestial objects. This extensive catalog includes everything from the Messier and NGC\/IC catalogs to SAO stars, ensuring you can locate and track a lifetime of targets. The 32-bit ARM processor ensures quick, lag-free access to the database, making target identification and GoTo slews fast and efficient.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e4-Line Backlit Display and 9-Speed Control\u003c\/h3\u003e\n\u003cp\u003eDesigned for field use, the handset features a red-backlit 4-line, 21-character LCD that preserves your night vision while providing all necessary alignment and object data. You have complete manual control over your mount with 9 selectable speeds, ranging from a slow 1x sidereal rate for precise photographic framing to a MAX speed for slewing quickly between opposite sides of the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUSB, Wi-Fi, and ASCOM for Full System Integration\u003c\/h3\u003e\n\u003cp\u003eThe Go2Nova 8409V2 moves beyond basic GoTo functions with modern connectivity. The built-in USB port facilitates easy firmware upgrades and provides a stable, wired connection for computer control. For wireless operation, integrated Wi-Fi allows you to command your mount from a PC or mobile device, eliminating cable drag. Both connection methods are fully ASCOM compatible, enabling seamless integration with popular planetarium software and imaging automation platforms like N.I.N.A. or Sequence Generator Pro.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat mounts is the Go2Nova 8409V2 handset compatible with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova 8409V2 is designed specifically for \u003cstrong\u003eselect iOptron Strain Wave Gear (SWG) mounts\u003c\/strong\u003e. It is not a universal controller. Always confirm compatibility with your specific mount model before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of objects are in the Go2Nova 8409V2's ~212,000 object database?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe database is comprehensive and includes the most popular celestial catalogs for amateur astronomers. This includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Messier, Caldwell, NGC, and IC catalogs\u003c\/li\u003e\n\u003cli\u003ePlanets, the Sun, and the Moon\u003c\/li\u003e\n\u003cli\u003eNamed deep-sky objects and stars\u003c\/li\u003e\n\u003cli\u003eAn extensive list of SAO catalog stars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect the Go2Nova 8409V2 to my computer?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou have two options for computer control with the Go2Nova 8409V2. You can use the built-in \u003cstrong\u003eUSB port\u003c\/strong\u003e for a reliable, wired connection, or use the integrated \u003cstrong\u003eWi-Fi\u003c\/strong\u003e for wireless control. Both methods support the industry-standard ASCOM protocol, allowing you to use a wide range of astronomy software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I update the firmware on the Go2Nova 8409V2 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The firmware on the handset is upgradeable. Updates are performed via the \u003cstrong\u003eUSB port\u003c\/strong\u003e using firmware and software provided by iOptron, ensuring your controller has the latest features and object databases.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I use the 9 slew speeds on the Go2Nova 8409V2 to center the Hercules Cluster (M13)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAfter your mount performs a GoTo slew to M13, you would use the higher speeds (like \u003cstrong\u003e128x or 256x\u003c\/strong\u003e) to make large adjustments to bring the cluster into the center of a low-power eyepiece. You would then switch to slower speeds (\u003cstrong\u003e8x or 16x\u003c\/strong\u003e) for fine-tuning the position. For final, precise centering in a high-power eyepiece or on an imaging sensor, the \u003cstrong\u003e1x or 2x\u003c\/strong\u003e speeds provide the necessary fine control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I control my iOptron SWG mount with planetarium software using the Go2Nova 8409V2?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The Go2Nova 8409V2 is fully \u003cstrong\u003eASCOM compatible\u003c\/strong\u003e. This allows it to act as an interface between your mount and any ASCOM-compliant software, including popular planetarium programs like Stellarium, Cartes du Ciel, or TheSkyX. You can click on an object in the software, and your mount will slew to it automatically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPU\u003c\/td\u003e\n\u003ctd\u003e32-bit ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eBacklit 4-line, 21-character LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e~212,000 Objects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Speeds\u003c\/td\u003e\n\u003ctd\u003e9 speeds (1X, 2X, 8X, 16X, 64X, 128X, 256X, 512X, MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Port\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWi-Fi\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComputer Control\u003c\/td\u003e\n\u003ctd\u003eYes (via USB \u0026amp; WiFi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocol Support\u003c\/td\u003e\n\u003ctd\u003eASCOM compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Upgradeable\u003c\/td\u003e\n\u003ctd\u003eYes (via USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eGo2Nova® 8409V2 Hand Controller\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917307408669,"sku":"IOP-8409V2","price":349.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8409V2-for-select-Strain-Wave-Gear-Mounts-1_947ec10c-cf46-4949-ae0d-0980795c1d53.jpg?v=1789142468"},{"product_id":"ioptron-8410","title":"iOptron Go2Nova® Handset 8410","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eApproximately 212,000 object database\u003c\/li\u003e\n\u003cli\u003eBacklit 8-line, 21-character LCD\u003c\/li\u003e\n\u003cli\u003e9 distinct slew speeds for precise centering\u003c\/li\u003e\n\u003cli\u003eInternal heater for operation down to -10ºC\u003c\/li\u003e\n\u003cli\u003ePowered by a 32-bit ARM CPU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron Go2Nova® Handset 8410\u003c\/h2\u003e\n\u003cp\u003eThe iOptron Go2Nova® Handset 8410 puts a celestial database of approximately 212,000 objects at your fingertips, displayed on a backlit 8-line, 21-character LCD. A 32-bit ARM CPU drives the 9 distinct slew speeds for precise control, and its internal heater ensures reliable operation in temperatures as low as -10ºC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA ~212,000 Object Database on an 8-Line LCD\u003c\/h3\u003e\n\u003cp\u003eThe core of the Go2Nova 8410 is its extensive database, containing approximately 212,000 objects for effortless GoTo slewing. The generous 8-line, 21-character backlit LCD provides more information at a glance than smaller displays, reducing the need to scroll through menus while aligning or selecting targets.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Line, 21-Character Display:\u003c\/strong\u003e Read full star names, coordinates, and instructional text without excessive scrolling, making alignment and target identification faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-bit ARM CPU:\u003c\/strong\u003e Provides the processing power for quick database searches and responsive menu navigation across the ~212,000 object catalog.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklit for Night Use:\u003c\/strong\u003e The adjustable red backlighting preserves your night vision while ensuring the large display remains clearly legible in complete darkness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e9-Speed Slewing Control Down to -10°C\u003c\/h3\u003e\n\u003cp\u003eNavigate the sky with precision using the 9 available slew speeds, ranging from a slow 1x sidereal rate for fine centering to a rapid MAX speed for moving between celestial objects. The Go2Nova 8410 is built for real-world observing conditions, featuring an internal heater that keeps the controller fully functional down to -10ºC (14°F).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 Slew Speeds:\u003c\/strong\u003e Includes 1X, 2X, 8X, 16X, 64X, 128X, 256X, 512X, and MAX for precise control at every stage of observation, from initial GoTo to final centering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Heater:\u003c\/strong\u003e Prevents the LCD from slowing down or freezing in cold weather, ensuring reliable operation between -10ºC and 40ºC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Upgradable:\u003c\/strong\u003e The handset's firmware can be updated via the mount connection, ensuring access to the latest features and object catalogs from iOptron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich iOptron mounts are compatible with the Go2Nova 8410 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova 8410 is the standard controller for many modern iOptron GoTo mounts. However, compatibility can vary by mount model and production date. Always check your specific mount's documentation or contact iOptron support to confirm compatibility before purchasing as a replacement or upgrade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do the 9 slew speeds on the Go2Nova 8410 help when centering a target like the Ring Nebula (M57)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhen you first slew to the Ring Nebula (M57), you'll use the \u003cstrong\u003eMAX speed\u003c\/strong\u003e. To center the faint nebula precisely in a high-power eyepiece, you'll then switch to the slower speeds like \u003cstrong\u003e8X or 16X\u003c\/strong\u003e for fine adjustments without overshooting the target. The \u003cstrong\u003e1X and 2X speeds\u003c\/strong\u003e are ideal for keeping the object perfectly centered during high-magnification visual observation or imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the Go2Nova 8410's 8-line display compared to smaller screens?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003e8-line, 21-character display\u003c\/strong\u003e on the Go2Nova 8410 shows significantly more information at once. This means you can see an object's full name, its coordinates, and other data on a single screen, reducing the need to scroll through menus and making the alignment and object selection process faster.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI observe in cold winters. Will the Go2Nova 8410 handset work in temperatures below freezing?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Go2Nova 8410 is specifically designed for cold weather use. It includes an \u003cstrong\u003einternal heater\u003c\/strong\u003e that keeps the electronics and the 8-line LCD display functioning correctly in temperatures down to \u003cstrong\u003e-10ºC (14°F)\u003c\/strong\u003e, preventing the screen from becoming sluggish or unreadable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs there a wireless control option instead of using the wired Go2Nova 8410 handset?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova 8410 is a traditional wired hand controller, which ensures a reliable, interference-free connection to your mount. For wireless control, iOptron offers separate Wi-Fi or Bluetooth adapters for many of their mounts, allowing you to control the telescope using software like SkySafari on a smartphone or tablet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWith ~212,000 objects, what kind of targets are in the Go2Nova 8410 database?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Go2Nova 8410's database of approximately 212,000 objects is comprehensive. Beyond the complete Messier (M), NGC, and IC catalogs, it includes extensive lists of stars (including SAO, Hipparcos), planets, comets, and asteroids, providing a lifetime of targets to explore.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLCD\u003c\/td\u003e\n\u003ctd\u003eBack lit 8-line, 21-character display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPU\u003c\/td\u003e\n\u003ctd\u003e32-bit ARM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Speed\u003c\/td\u003e\n\u003ctd\u003e9 speeds (1X, 2X, 8X, 16X, 64X, 128X, 256X, 512X, MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003eApprox. 212,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Upgrade\u003c\/td\u003e\n\u003ctd\u003eYes (via mount)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Temperature\u003c\/td\u003e\n\u003ctd\u003e-10ºC ~ 40ºC (internal heated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eGo2Nova® Handset 8410\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Telescope and 1-Year Accessory Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917307998493,"sku":"IOP-8410","price":461.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Go2Nova-Handset-8410-1_1aba307e-2410-4bf4-9060-642fd443928f.jpg?v=1789142477"},{"product_id":"ioptron-8415","title":"iOptron Controller Cable - 6P4C","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e6P4C (6 Position, 4 Conductor) Connector\u003c\/li\u003e\n\u003cli\u003eStandard Replacement for Telescope Hand Controllers\u003c\/li\u003e\n\u003cli\u003eFlexible Coiled or Straight Cable Design\u003c\/li\u003e\n\u003cli\u003eDurable Locking Tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eController Cable - 6P4C\u003c\/h2\u003e\n      \u003cp\u003eThis Controller Cable is a direct replacement cable for connecting a telescope mount's hand controller to the main control board, utilizing the common 6P4C connector standard. The 6P4C plug, often visually similar to a telephone handset jack, ensures a secure, locking connection for reliable communication between your controller and mount.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003e6P4C Connector: The Standard for Hand Controller Connections\u003c\/h3\u003e\n      \u003cp\u003eThe 6P4C (6 Position, 4 Conductor) connector has been adopted by many major telescope manufacturers for their GoTo systems. This cable serves as a fundamental link, carrying power and data signals that allow your hand controller to command the mount's motors for slewing, tracking, and alignment procedures.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSecure Connection:\u003c\/strong\u003e The plastic locking tab on the 6P4C connector prevents accidental disconnection during an observing session, which could otherwise interrupt tracking or cause a loss of alignment.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eCommon Application:\u003c\/strong\u003e This cable style is frequently used for the primary hand-controller-to-mount connection on systems from brands like Celestron (NexStar\/CGX), Sky-Watcher (SynScan), and others.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eCritical Compatibility Check: Verifying Your Mount's Pinout\u003c\/h3\u003e\n      \u003cp\u003eWhile the 6P4C connector itself is standardized, the internal wiring arrangement, or \"pinout,\" is not. Different manufacturers—and sometimes even different mount models from the same manufacturer—use different pinouts for their controller ports.\u003c\/p\u003e\n      \u003cp\u003eUsing a cable with an incorrect pinout can lead to erratic behavior or, in worst-case scenarios, damage to the electronics in your mount or hand controller. It is essential to confirm that this replacement cable's pinout matches the specific requirements of your telescope mount before connecting it. Consult your mount's original documentation to verify compatibility.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 6P4C cable work with my Celestron NexStar 8SE mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eMany Celestron mounts, including the NexStar series, use a 6P4C cable for the hand controller. However, you must \u003cstrong\u003everify the pinout\u003c\/strong\u003e. A \"straight-through\" telephone handset cord will not work and may cause damage. This cable is intended as a like-for-like replacement for the original Celestron controller cable.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between a 6P4C and a 6P6C controller cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe numbers refer to the connector's physical size and the number of electrical contacts.\n    \u003cbr\u003e• \u003cstrong\u003e6P4C\u003c\/strong\u003e means 6 Positions, 4 Conductors. The plug has space for six pins, but only the middle four are present and wired. This is common for hand controllers.\n    \u003cbr\u003e• \u003cstrong\u003e6P6C\u003c\/strong\u003e means 6 Positions, 6 Conductors. All six positions in the plug have pins and are wired. This is often used for autoguider (ST-4) ports or auxiliary ports that require more connections.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a standard telephone handset cord as a replacement 6P4C controller cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003e\u003cstrong\u003eNo, you should not.\u003c\/strong\u003e While they use the same 6P4C connector, standard telephone handset cords have a \"crossover\" or \"reverse\" pinout. Telescope controller cables typically require a \"straight-through\" pinout. Using a phone cord can connect power to data lines, potentially damaging your mount's electronics permanently.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eMy hand controller doesn't power on with this new 6P4C cable. What should I check?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eFirst, ensure the cable is fully seated and the locking tabs have clicked into place on both the mount and the hand controller. Second, confirm that the mount itself is powered on and receiving adequate voltage. If it still doesn't work, the issue may be an incorrect pinout for your specific mount model, so double-check the cable's compatibility against your mount's requirements.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat does the \"6P4C\" in Controller Cable mean?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003e\"6P4C\" is a standard designation for a modular electrical connector. It stands for \u003cstrong\u003e6 Position, 4 Conductor\u003c\/strong\u003e. This means the plastic plug has six available positions for pins, but only the central four positions are fitted with metal conductors to carry a signal.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this 6P4C cable for connecting my Sky-Watcher mount to a PC?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, this cable is typically for connecting the SynScan hand controller to the mount's hand controller (HC) port. To connect a Sky-Watcher mount to a PC for computer control, you generally need a different cable, often a USB-to-Serial adapter that connects to the bottom of the hand controller.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e6P4C (6 Position, 4 Conductor)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTelescope Hand Controller to Mount Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eController Cable - 6P4C\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  Please see manufacturer's warranty policy for details.\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917308883229,"sku":"IOP-8415","price":25.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Controller-Cable-6P4C-1_af3b61b5-e0f1-41f6-97dc-b9c759c1bfeb.jpg?v=1789142491"},{"product_id":"ioptron-8415-6p6c","title":"iOptron Controller Cable - 6P6C","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003e6-Position, 6-Conductor (6P6C) Connector\u003c\/li\u003e\n\u003cli\u003eConnects Hand Controller to Mount\u003c\/li\u003e\n\u003cli\u003eEnsures Reliable GoTo Communication\u003c\/li\u003e\n\u003cli\u003eStandard Replacement for Many Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eController Cable - 6P6C\u003c\/h2\u003e\n      \u003cp\u003eThis Controller Cable - 6P6C provides the essential electronic link between your telescope's hand controller and the mount's drive system. A secure, high-integrity connection is critical for accurate GoTo slewing and uninterrupted tracking, and this 6-position, 6-conductor cable is built to the standard required by many popular computerized mounts.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eReliable GoTo Commands: The Critical 6P6C Link\u003c\/h3\u003e\n      \u003cp\u003eThe stability of your entire GoTo system depends on the simple cable connecting the controller to the mount. Intermittent contact or a poor connection can lead to failed alignments, erratic slewing, and lost communication mid-session. This 6P6C cable ensures that every command from your hand controller is transmitted cleanly to the mount's motors.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePrevents Signal Loss:\u003c\/strong\u003e A firm-fitting 6P6C connector minimizes the risk of accidental disconnection or signal drop during an observation session.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eMaintains Accuracy:\u003c\/strong\u003e Ensures that precise commands for slewing, guiding, and tracking are delivered without corruption, which is crucial for astrophotography.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eThe Universal 6P6C Standard\u003c\/h3\u003e\n      \u003cp\u003eThe 6P6C (6-Position, 6-Conductor) connector, often referred to as an RJ12, is a common standard for telescope peripherals. This cable serves as a direct replacement for the original cable supplied with many GoTo telescope mounts, making it an essential spare part to keep in your accessory case.\u003c\/p\u003e\n      \u003cp\u003eBefore purchasing, it is critical to verify the port type on your specific hand controller and mount. While 6P6C is widely used, some systems may use a different connector, such as a 4-pin or 8-pin variant.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is a 6P6C Controller Cable used for in astronomy?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eA \u003cstrong\u003e6P6C Controller Cable\u003c\/strong\u003e is the standard communication link between a telescope's hand controller (like a Celestron NexStar+ or iOptron Go2Nova) and the main control board in the telescope mount. It transmits all user commands, including GoTo slewing, tracking rate changes, and alignment data.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 6P6C cable work with my iOptron CEM40 or Celestron AVX mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eMany iOptron and Celestron mounts use the \u003cstrong\u003e6P6C (RJ12) standard\u003c\/strong\u003e for their hand controller ports. However, manufacturers can change specifications over time. Always confirm by checking your mount's manual or visually inspecting the port on both the hand controller and the mount to ensure they match the 6-pin connector on this cable.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between this 6P6C cable and a standard telephone cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eWhile they may look similar, there can be a critical difference in the internal wiring. A standard telephone cable (RJ11) is often 4-pin (6P4C) and may have a \"crossover\" or \"rolled\" wiring configuration. A telescope \u003cstrong\u003e6P6C cable\u003c\/strong\u003e must have a \"straight-through\" wiring configuration with all six conductors connected pin-to-pin to function correctly. Using the wrong type of cable can cause communication errors or even damage your mount's electronics.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCould a faulty Controller Cable cause problems with my mount's alignment or tracking?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eAbsolutely. A faulty or intermittent \u003cstrong\u003eController Cable\u003c\/strong\u003e is a common source of troubleshooting issues. Symptoms can include:\n    \u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eFailure to complete the initial star alignment.\u003c\/li\u003e\n    \u003cli\u003eThe mount slewing to the wrong coordinates.\u003c\/li\u003e\n    \u003cli\u003e\"No Response\" errors on the hand controller.\u003c\/li\u003e\n    \u003cli\u003eSudden loss of tracking during an exposure.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    Having a spare, known-good cable is one of the easiest ways to diagnose these problems in the field.\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy should I have a spare 6P6C Controller Cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe controller cable is one of the most frequently handled components of your setup and is subject to wear, accidental tugs, and pin damage. A failure in the field can end your observing session immediately. A spare \u003cstrong\u003e6P6C Controller Cable\u003c\/strong\u003e is a small, inexpensive piece of insurance to keep in your accessory case.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I properly care for my Controller Cable?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eTo maximize the life of your \u003cstrong\u003e6P6C Controller Cable\u003c\/strong\u003e, avoid sharp bends or kinks in the wire. When not in use, coil it loosely rather than wrapping it tightly around the hand controller. Ensure the plastic locking tabs on the connectors do not get bent or broken, as this will prevent a secure connection.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e6-Position, 6-Conductor (6P6C) \/ RJ12\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTelescope Mount Hand Controller Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eController Cable - 6P6C\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eDavid Astro General Accessories Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917310095645,"sku":"IOP-8415-6P6C","price":28.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-Controller-Cable-6P6C-1_3f540b37-9b1b-434d-b42e-f104f611d06f.jpg?v=1789142500"},{"product_id":"ioptron-8438","title":"iOptron GPS Module for CEM26\/GEM28\/CEM40\/GEM45 Mounts","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAutomatically inputs time, date, and location\u003c\/li\u003e\n\u003cli\u003eEliminates manual coordinate entry for faster setup\u003c\/li\u003e\n\u003cli\u003eIncreases the accuracy of initial GoTo alignments\u003c\/li\u003e\n\u003cli\u003eDesigned for iOptron CEM26, GEM28, CEM40, and GEM45 mounts\u003c\/li\u003e\n\u003cli\u003eSimple plug-and-play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron GPS Module for CEM26\/GEM28\/CEM40\/GEM45 Mounts\u003c\/h2\u003e\n\u003cp\u003eThe iOptron GPS Module for CEM26, GEM28, CEM40, and GEM45 mounts automates the most critical step of your initial setup. This compact accessory feeds precise time, date, and location data directly to your mount's GoTo system, eliminating the need for manual entry. By removing the potential for human error, it guarantees your alignment is based on accurate coordinates from the very start of your observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAutomated GoTo Alignment: Accurate Time and Location Data\u003c\/h3\u003e\n\u003cp\u003eAchieving accurate GoTo slews and tracking depends entirely on the quality of your initial alignment. The iOptron GPS Module removes any guesswork by automatically populating your hand controller with the correct time, date, and geographical coordinates. This ensures your mount has the precise foundational data it needs for a successful star alignment, saving you valuable time in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSeamless Integration for CEM26, GEM28, CEM40, and GEM45 Mounts\u003c\/h3\u003e\n\u003cp\u003eThis GPS module is engineered specifically for use with iOptron's popular CEM26, GEM28, CEM40, and GEM45 equatorial mounts. It connects directly to the mount's designated port, establishing a reliable data link without complex configuration. The module is a true plug-and-play accessory designed to work perfectly with the mount's firmware and hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the iOptron GPS Module for CEM40\/GEM45 improve GoTo accuracy?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe module provides your mount with precise, real-time location and time data, which is the foundation for an accurate sky model. This eliminates errors from manually entering incorrect coordinates or time, leading to more reliable GoTo slews and better tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need to manually enter my location every time with the GPS Module for CEM26\/GEM28?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The primary purpose of this module is to automate that process. Once connected, it will automatically detect your location and the current time, sending the information to the mount as soon as it powers on.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI travel to different dark sky sites with my GEM45 mount. Is this GPS Module a good accessory for me?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, it's an ideal accessory for observers who travel. Instead of having to look up and manually enter new coordinates for each location, the GPS Module automatically updates your position, making setup at a new site significantly faster and more convenient.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I'm setting up my CEM26 in my backyard for imaging the Orion Nebula (M42), do I still need the GPS module?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile you can manually enter your fixed backyard coordinates, the GPS module still offers a key benefit by providing the exact current time, synced to global positioning satellites. This precision eliminates one more variable and helps ensure your mount's internal clock is perfect, which is beneficial for long-exposure imaging and tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the GPS Module for CEM26\/GEM28\/CEM40\/GEM45 difficult to install?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is designed to be very simple. The module plugs into a dedicated port on the mount. It's a plug-and-play device that requires no special software or configuration to function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this GPS module work with other iOptron mounts, like a CEM70?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis module is specifically designed and verified for the \u003cstrong\u003eCEM26, GEM28, CEM40, and GEM45\u003c\/strong\u003e mount series. For compatibility with other mounts like the CEM70, you should check for the GPS module designed for that specific model to ensure proper function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917312848157,"sku":"IOP-8438","price":175.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-GPS-Module-for-CEM26-GEM28-CEM40-GEM45-1_cf98c626-5e48-41da-89e9-cd9aca3b5eae.jpg?v=1789142571"},{"product_id":"ioptron-8434","title":"iOptron StarFi TM Wi-Fi Telescope Adapter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds 802.11b\/g\/n Wi-Fi control to compatible iOptron mounts\u003c\/li\u003e\n\u003cli\u003eEnables wireless GoTo from smartphones, tablets, and computers\u003c\/li\u003e\n\u003cli\u003eSupports Sky Safari Pro on both iOS and Android\u003c\/li\u003e\n\u003cli\u003eProvides full ASCOM driver support for PC-based control\u003c\/li\u003e\n\u003cli\u003eFeatures both Access Point (AP) and Station (STA) network modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eStarFi\u003csup\u003eTM\u003c\/sup\u003e Wi-Fi Telescope Adapter\u003c\/h2\u003e\n\u003cp\u003eThe iOptron StarFi\u003csup\u003eTM\u003c\/sup\u003e Wi-Fi Telescope Adapter adds robust 802.11b\/g\/n wireless control to a wide range of iOptron mounts, supporting both AP and STAtion network modes for maximum flexibility. It enables full GoTo slewing from your iOS and Android devices running Sky Safari Pro, and requires an external 12V power source only for certain mounts like the SmartEQ\/Pro.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eWireless GoTo Using 802.11b\/g\/n Wi-Fi\u003c\/h3\u003e\n\u003cp\u003eEliminate cable snags and the need to stay tethered to your mount. The StarFi adapter creates its own wireless network, allowing you to connect and control your telescope from a comfortable distance using your smartphone, tablet, or laptop. Password protection ensures your connection remains secure during star parties or group observing sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBroad Mount Support Requiring up to 12V External Power\u003c\/h3\u003e\n\u003cp\u003eThe StarFi adapter is designed for a broad array of iOptron mounts, though some models require specific cables or power arrangements. This ensures you can bring modern wireless control to both new and legacy iOptron systems. Note that for SmartEQ\/Pro mounts, an external 12V power source is necessary for operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectly Compatible:\u003c\/strong\u003e CEM60, CEM60-EC, iEQ45 Pro, iEQ30 Pro, ZEQ25, and CEM25 mounts connect directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires Adapters:\u003c\/strong\u003e Older iEQ45\/iEQ30 mounts with 8407 or 8406 hand controllers, as well as Cube Pro and Cube II mounts with the 8408 HC, require specific iOptron cables or standard DB9 connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsupported Mounts:\u003c\/strong\u003e This adapter does not support the original Cube, MiniTower, or SmartStar PR series mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eTwo Network Modes for ASCOM \u0026amp; Sky Safari Pro\u003c\/h3\u003e\n\u003cp\u003eThe StarFi features two distinct network modes to suit any observing environment. In Access Point (AP) mode, the adapter creates its own Wi-Fi hotspot, perfect for direct connection in the field. In Station (STA) mode, it connects to your existing home Wi-Fi network, allowing seamless control from a PC in another room via the iOptron ASCOM driver.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the StarFi adapter to control my CEM25 mount with Sky Safari Pro on my iPad?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The \u003cstrong\u003eStarFi adapter\u003c\/strong\u003e is fully compatible with the \u003cstrong\u003eCEM25\u003c\/strong\u003e mount and supports \u003cstrong\u003eSky Safari Pro\u003c\/strong\u003e on iOS devices like the iPad. You can connect your iPad directly to the StarFi's Wi-Fi network and enjoy complete wireless GoTo control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow can I control my CEM60 mount from my laptop inside while imaging the Orion Nebula (M42)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo control your \u003cstrong\u003eCEM60\u003c\/strong\u003e from an indoor laptop, you would configure the \u003cstrong\u003eStarFi adapter\u003c\/strong\u003e to \u003cstrong\u003eSTAtion (STA) mode\u003c\/strong\u003e. This connects the adapter to your home Wi-Fi network. Your laptop, on the same network, can then connect to the mount using the iOptron ASCOM driver in your preferred imaging software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between AP and STAtion mode on the StarFi adapter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eAccess Point (AP) mode\u003c\/strong\u003e is the default setting where the \u003cstrong\u003eStarFi\u003c\/strong\u003e creates its own Wi-Fi network. You connect your phone or tablet directly to it, which is ideal for field use where no other network is available. \u003cstrong\u003eSTAtion (STA) mode\u003c\/strong\u003e allows the StarFi to join an existing Wi-Fi network, like your home router, enabling control from any device on that network.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat do I need to connect the StarFi to my older iEQ45 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe required cables for an older \u003cstrong\u003eiEQ45\u003c\/strong\u003e depend on its hand controller.\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you have the \u003cstrong\u003e8407 hand controller\u003c\/strong\u003e, you will need a DB9 RS232 male-to-male connector.\u003c\/li\u003e\n\u003cli\u003eIf you have the \u003cstrong\u003e8406 hand controller\u003c\/strong\u003e, you will need both a DB9 RS232 male-to-male connector and an iOptron RS232-RJ9 cable (#8412).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy SmartEQ Pro mount isn't powering the StarFi adapter. What's wrong?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is expected behavior. The \u003cstrong\u003eSmartEQ Pro\u003c\/strong\u003e and \u003cstrong\u003eSmartEQ\u003c\/strong\u003e mounts cannot supply power through their ports to run the \u003cstrong\u003eStarFi adapter\u003c\/strong\u003e. You must connect an external \u003cstrong\u003e12V DC power source\u003c\/strong\u003e directly to the StarFi for it to function with these specific mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the StarFi adapter work with a non-iOptron mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eStarFi adapter\u003c\/strong\u003e is designed and supported for iOptron mounts. While it may work with other manufacturers' mounts that use serial control, this is not guaranteed. Doing so would likely require a DB9 RS232 male-to-male connector and an iOptron RS232-RJ9 cable (#8412), and would be considered an experimental setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eStarFi\u003csup\u003eTM\u003c\/sup\u003e Wi-Fi Adapter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e6P6C Power Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e4P4C Serial Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eInstruction Manual\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron Warranty Policy\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917313437981,"sku":"IOP-8434","price":189.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-StarFi-sup-TM-sup-Wi-Fi-Telescope-Adapter-1_8063d1a1-337f-45b1-b520-765f1ed6730f.jpg?v=1789142588"},{"product_id":"sky-watcher-synscan-usb-adapter","title":"Sky-Watcher SynScan USB Adapter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConverts a Sky-Watcher GoTo mount's serial connection to a USB-B port\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 connection to your PC\u003c\/li\u003e\n\u003cli\u003eControls the mount directly, without the hand controller\u003c\/li\u003e\n\u003cli\u003eWorks with the SynScan Pro App for Windows\u003c\/li\u003e\n\u003cli\u003eLets you update the mount's motor control firmware\u003c\/li\u003e\n\u003cli\u003eIncludes EQ (8-pin to 8-pin) and AZ (8-pin to 6-pin) cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSky-Watcher SynScan USB Adapter\u003c\/h2\u003e\n\u003cp\u003eThe Sky-Watcher SynScan USB Adapter lets you connect a Sky-Watcher GoTo mount that has a serial port to a PC through a USB-B port, replacing outdated serial connections. Over its USB 2.0 link, you can control the mount directly from the SynScan Pro App for Windows or your astrophotography software, without the hand controller, and update the mount's motor control firmware. Both cables are included: an EQ cable (8-pin to 8-pin) and an AZ cable (8-pin to 6-pin).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDirect PC Control Without the Hand Controller\u003c\/h3\u003e\n\u003cp\u003ePlug the adapter into your mount and your computer, and the PC takes over GoTo and tracking commands. You can run the SynScan Pro App for Windows or the astrophotography software you already use for imaging sessions, and keep the hand controller in the case.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e2 Cables Included for EQ and AZ Mounts\u003c\/h3\u003e\n\u003cp\u003eThe EQ cable (8-pin to 8-pin) connects to Sky-Watcher equatorial mounts, and the AZ cable (8-pin to 6-pin) connects to alt-azimuth mounts. With both cables in the box, the same adapter works across most SynScan mounts in your collection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich mounts does the SynScan USB Adapter work with?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIt is designed for Sky-Watcher GoTo mounts with a serial port and works with most SynScan mounts. Use the EQ cable (8-pin to 8-pin) for equatorial mounts and the AZ cable (8-pin to 6-pin) for alt-azimuth mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I still need the hand controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The adapter connects the mount directly to your PC, so you can control it without the hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich software can I use with it?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eSky-Watcher designed it for the SynScan Pro App for Windows, and it also lets you control the mount from astrophotography software on your PC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I update my mount's firmware with this adapter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. Sky-Watcher lists updating the mount's motor control firmware as one of the adapter's uses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need this adapter if my mount already has a USB port?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The adapter is intended for mounts with a serial port. Mounts that already include a USB port, such as the EQ8-R, connect to a PC directly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e050234301077\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComputer Connection\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 (USB-B port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Connection\u003c\/td\u003e\n\u003ctd\u003eSerial port, via the EQ or AZ cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEQ Cable\u003c\/td\u003e\n\u003ctd\u003e8-pin to 8-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAZ Cable\u003c\/td\u003e\n\u003ctd\u003e8-pin to 6-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounts\u003c\/td\u003e\n\u003ctd\u003eSky-Watcher GoTo mounts with a serial port (most SynScan mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003eSynScan Pro App for Windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHand Controller Required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eSynScan USB Adapter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eEQ Cable (8-pin to 8-pin)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAZ Cable (8-pin to 6-pin)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.skywatcherusa.com\/pages\/firmware-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/sky-watcher-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSky-Watcher 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sky-Watcher","offers":[{"title":"Default Title","offer_id":67666294735133,"sku":"SW-S30107","price":40.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/S30107_SynScanUSBAdapter.jpg?v=1790966958"}],"url":"https:\/\/davidastro.com\/en-int\/collections\/hand-controllers-and-drives.oembed","provider":"David Astro","version":"1.0","type":"link"}