{"title":"Electronic Accessories","description":"\u003cdiv\u003e\n  \u003cp\u003e\n    A modern imaging rig is a small outdoor computer network running in the cold. Hubs, cables, power distribution, WiFi modules and controllers determine whether it runs unattended for eight hours or drops a connection at 2 a.m. David Astro carries electronic accessories in Canada, shipping from Canadian stock.\n  \u003c\/p\u003e\n  \u003cp\u003e\n    Most overnight failures we help diagnose are power or cable failures rather than software ones. Tell us what your rig is doing and we will help you find the actual cause.\n  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- more --\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eElectronics That Keep a Rig Running\u003c\/h2\u003e\n  \u003cp\u003e\n    Reliability comes from short cable runs, adequate current headroom, and connectors that survive repeated cold cycling.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePowered USB hubs:\u003c\/strong\u003e Mount-top hubs that shorten cable runs to cameras and focusers, since long unpowered USB runs are a leading cause of intermittent disconnections.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/collections\/power-modules\"\u003ePower distribution boxes:\u003c\/a\u003e\u003c\/strong\u003e Convert one supply into regulated outputs for mount, camera, dew heaters and focuser, with individual fusing.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/collections\/wifi-modules\"\u003eWiFi and network modules:\u003c\/a\u003e\u003c\/strong\u003e Wireless control of mounts and accessories, removing a data cable from the moving part of the rig.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/collections\/cables\"\u003eCables:\u003c\/a\u003e\u003c\/strong\u003e Cold-flexible cabling in appropriate gauge, since standard PVC cable stiffens dramatically below minus 20 and can drag the mount.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eControllers and interface boxes:\u003c\/strong\u003e Devices that bridge focusers, rotators, flat panels and sensors into a single control environment.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/collections\/cable-management\"\u003eCable management:\u003c\/a\u003e\u003c\/strong\u003e Clips, wraps and routing hardware that prevent the snag which ends a session and can damage a focuser.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eWhy Choose David Astro for Electronic Accessories\u003c\/h2\u003e\n  \u003cp\u003e\n    We troubleshoot these rigs regularly, so the recommendations come from failure patterns rather than specifications.\n  \u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCold-weather cabling advice:\u003c\/strong\u003e We recommend cable types that stay flexible below minus 20, because stiff cable pulls on the mount and shows up as guiding error.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCurrent headroom calculated:\u003c\/strong\u003e We total your loads and specify distribution with margin, since running near capacity causes the intermittent faults that are hardest to diagnose.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUSB run length considered:\u003c\/strong\u003e We keep camera connections short with a mount-top hub, which resolves most unexplained disconnection problems.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAuthorized dealer:\u003c\/strong\u003e Genuine products with manufacturer warranty, in Canadian inventory and shipped domestically.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShips from Canada:\u003c\/strong\u003e No duties or brokerage fees for Canadian buyers.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eElectronic Accessories in Canada — Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003e\u003cstrong\u003eWhy does my camera keep disconnecting?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eUsually a long USB run, an unpowered hub, or a marginal power supply. Moving to a powered hub on the mount with short cables to the camera resolves the majority of these cases.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eDo I need a power distribution box?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eOnce you are running mount, camera, focuser and dew heaters, yes. Individual fusing and regulated outputs prevent one fault taking down the whole rig, and it removes a tangle of separate supplies.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eWhat cable should I use in winter?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eSilicone or otherwise cold-rated cable. Standard PVC stiffens below about minus 20 and can exert enough force on the mount to affect guiding, quite apart from the risk of snagging.\u003c\/dd\u003e\n    \u003cdt\u003e\u003cstrong\u003eIs WiFi control reliable outdoors?\u003c\/strong\u003e\u003c\/dt\u003e\n    \u003cdd\u003eGenerally yes at short range, and it removes a cable from the moving parts. For unattended all-night operation, many imagers still prefer a wired connection to the control computer for the critical link.\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003ch2\u003eRig dropping out overnight?\u003c\/h2\u003e\n  \u003cp\u003eDescribe the failure and we will help find the cause. Canadian stock, cold-rated components, expert support.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"celestron-aux-port-splitter","title":"Celestron AUX Port Splitter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds a second auxiliary port to your Celestron mount\u003c\/li\u003e\n\u003cli\u003eConnect two accessories at once, like a hand controller and StarSense AutoAlign\u003c\/li\u003e\n\u003cli\u003ePlugs directly into the existing AUX or hand controller port\u003c\/li\u003e\n\u003cli\u003eParallel adapter ensures both connected devices function correctly\u003c\/li\u003e\n\u003cli\u003eCovered by a 2-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron AUX Port Splitter\u003c\/h2\u003e\n\u003cp\u003eThe Celestron AUX Port Splitter instantly expands your computerized mount's connectivity by turning a single AUX or hand controller port into two. This simple adapter is the solution for running modern accessories like the StarSense AutoAlign without having to disconnect your NexStar+ hand controller, and comes with a 2-year warranty for peace of mind.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAdd a Second AUX Port to Your Celestron Mount\u003c\/h3\u003e\n\u003cp\u003eModern astronomy accessories often compete for the single auxiliary port available on many Celestron computerized mounts. The Celestron AUX Port Splitter resolves this by providing a clean, parallel connection that lets you plug in two devices simultaneously. It's an essential upgrade for anyone looking to expand their setup's capabilities without complex workarounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRun 2 Accessories Simultaneously: StarSense and Hand Control\u003c\/h3\u003e\n\u003cp\u003eThe most common use for this splitter is to enable the use of a Celestron StarSense AutoAlign accessory alongside the standard hand controller. Simply plug the splitter into the mount's AUX port, then connect both the StarSense and the hand controller to the splitter. This allows you to leverage the power of automated alignment while retaining full manual control and access to the hand controller's database.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Celestron AUX Port Splitter used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Celestron AUX Port Splitter is designed to solve the problem of having too few auxiliary ports on your Celestron computerized mount. It plugs into a single AUX or hand controller port and provides two ports in its place, allowing you to connect multiple accessories at the same time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Celestron AUX Port Splitter with a StarSense AutoAlign and my NexStar+ hand controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is its primary function. You can connect both the StarSense AutoAlign and your hand controller to the mount simultaneously, eliminating the need to swap cables. This is especially useful on mounts like the Advanced VX or NexStar SE series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this splitter work with my Celestron CGEM II mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the Celestron AUX Port Splitter is compatible with any Celestron computerized mount that uses an AUX port, including the CGEM II, Advanced VX, CGX, NexStar SE, and CPC series telescopes. It plugs into either the dedicated AUX port or the port intended for the hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron AUX Port Splitter introduce any signal delay or power issues?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the splitter is a passive parallel adapter. It is engineered by Celestron to ensure that both connected devices receive the necessary power and data signals to function correctly without interfering with one another.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I connect two hand controllers to the Celestron AUX Port Splitter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the splitter is not designed to operate two primary control devices simultaneously. It is intended for connecting a primary controller (like the NexStar+ hand controller) and a peripheral accessory (like StarSense, a WiFi module, or a focuser).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Celestron AUX Port Splitter difficult to install?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is extremely simple. Just unplug your hand controller, plug the AUX Port Splitter into that port on the mount, and then plug your hand controller and your second accessory into the two ports on the splitter. No tools or software are required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAUX Port Splitter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software \u0026amp; Drivers\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183089949,"sku":"CEL-93919","price":42.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-AUX-Port-Splitter-93919-1__41723.1594230511.1280.1280.jpg?v=1684338206"},{"product_id":"celestron-nexstar-hand-control-usb-az","title":"Celestron NexStar+ Hand Control USB, AZ","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDirect GoTo upgrade or replacement for Celestron alt-azimuth mounts\u003c\/li\u003e\n\u003cli\u003eAccess a vast database of celestial objects across 4 major catalogs\u003c\/li\u003e\n\u003cli\u003eFeatures Celestron's proprietary SkyAlign technology for fast, easy setup\u003c\/li\u003e\n\u003cli\u003eIntegrated USB port allows for direct firmware updates from a PC\u003c\/li\u003e\n\u003cli\u003eCovered by a 2-Year Celestron Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron NexStar+ Hand Control USB, AZ\u003c\/h2\u003e\n\u003cp\u003eThe Celestron NexStar+ Hand Control USB, AZ is the standard-issue GoTo controller for over 7 series of Celestron alt-azimuth telescopes, putting a vast database of celestial objects at your fingertips. This flash-upgradeable hand control features an integrated USB port for future-proofing your setup and is backed by a 2-Year Warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eGoTo Control for 7+ Celestron Telescope Series\u003c\/h3\u003e\n\u003cp\u003eThis NexStar+ AZ Hand Control is the official replacement and upgrade component for all current Celestron alt-azimuth (AZ) GoTo mounts. It is fully compatible with the NexStar SE, SLT, Evolution, CPC, CPC Deluxe, Astro Fi, and LCM telescope series, ensuring seamless integration and reliable pointing accuracy right out of the box.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eExplore 4 Major Catalogs with Automated Sky Tours\u003c\/h3\u003e\n\u003cp\u003eAt the push of a button, you can automatically slew your telescope to thousands of targets. The internal database includes objects from 4 major astronomical catalogs: the Messier, NGC, Caldwell, and SAO (SAO brightest stars). The planets and a curated list of the most popular deep-sky objects are also directly accessible.\u003c\/p\u003e\n\u003cp\u003eIf you're unsure what to observe, the built-in Tour Mode automatically generates a list of the best objects currently visible from your location. This feature makes it easy to discover new celestial sights like the Orion Nebula (M42) or the Hercules Cluster (M13) during any observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSimplified Alignment with SkyAlign Technology\u003c\/h3\u003e\n\u003cp\u003eGetting your telescope aligned is faster with Celestron's SkyAlign procedure built into the hand control. Simply point the telescope to any three bright celestial objects, and the NexStar+ system will identify them and model the night sky. This intuitive process eliminates the need to know the names of specific alignment stars.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Settings:\u003c\/strong\u003e Adjust the maximum slew speed to your preference and program slew limits to prevent the telescope from pointing below the horizon or hitting the tripod.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Interface:\u003c\/strong\u003e The red-backlit LCD screen and buttons preserve your night vision while providing clear, readable text and intuitive menu navigation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUSB Port and 2-Year Warranty for Long-Term Use\u003c\/h3\u003e\n\u003cp\u003eA key upgrade from older models, this hand control features a built-in USB-B port at its base. This modern connection allows you to update the hand control's firmware directly from your PC using the Celestron Firmware Manager (CFM) software, ensuring you always have access to the latest features and bug fixes. The entire unit is protected by a 2-Year Celestron factory warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eNexStar+ AZ vs. EQ Hand Control: Which One Do You Need?\u003c\/h3\u003e\n\u003cp\u003eCelestron produces two versions of the NexStar+ hand control, and choosing the correct one is critical for your mount's function. This AZ version is specifically for alt-azimuth mounts, while the EQ version is required for German equatorial mounts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ AZ (This Model):\u003c\/strong\u003e Designed for mounts that move in altitude (up\/down) and azimuth (left\/right). Its software includes alignment routines like SkyAlign and Solar System Align that are optimized for this geometry. It is the correct choice for fork-mounted SE and CPC scopes, and single-arm mounts like the SLT and Evolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ EQ:\u003c\/strong\u003e Required for German equatorial mounts like the Advanced VX or CGX. Its firmware includes polar alignment routines (like All-Star Polar Align) and understands how to track objects by moving primarily in Right Ascension. Using an AZ controller on an EQ mount will result in improper tracking and pointing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between this NexStar+ AZ USB hand control and the older, non-USB version?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary difference is the \u003cstrong\u003eUSB port\u003c\/strong\u003e. This modern version allows you to update the firmware directly with a standard USB cable connected to a PC. Older models had a serial port at the bottom that required a USB-to-RS232 serial adapter, which was often less reliable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this NexStar+ AZ Hand Control on my Celestron Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The Advanced VX is a German equatorial (EQ) mount and requires the \u003cstrong\u003eNexStar+ EQ Hand Control\u003c\/strong\u003e. This AZ version lacks the specific firmware and polar alignment routines necessary to operate an equatorial mount correctly. Using the wrong controller will lead to failed alignments and poor tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy old NexStar hand control failed. Is this a direct replacement for my NexStar 8SE?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is the correct and current factory replacement for the hand control that originally shipped with all NexStar SE series telescopes, including the 8SE. It is also the correct replacement for SLT, CPC, Evolution, Astro Fi, and LCM series telescopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the NexStar+ Hand Control USB?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo update, you will need a PC and a USB-A to USB-B cable (not included). Download and install the free Celestron Firmware Manager (CFM) software from Celestron's website. Connect the hand control to your PC, run CFM, and the software will automatically detect the device and download the latest firmware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the NexStar+ Hand Control work as a standalone device?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. The NexStar+ Hand Control is a self-contained computer. It plugs into your Celestron mount's \"Hand Control\" or \"HC\" port and manages all alignment, database, and GoTo functions without needing an external computer or WiFi connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of objects are in the NexStar+ Hand Control's \"Tour Mode\"?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Tour Mode generates a customized list of the best objects to view based on your current time, date, and location. It typically includes a mix of popular targets from various catalogs, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBright nebulae like the Orion Nebula (M42)\u003c\/li\u003e\n\u003cli\u003eGalaxies like the Andromeda Galaxy (M31)\u003c\/li\u003e\n\u003cli\u003eGlobular clusters like the Hercules Cluster (M13)\u003c\/li\u003e\n\u003cli\u003eOpen clusters like the Pleiades (M45)\u003c\/li\u003e\n\u003cli\u003eBright double stars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003eAccess to Messier, NGC, Caldwell, and SAO catalogs, plus planets and popular objects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlignment Procedures\u003c\/td\u003e\n\u003ctd\u003eSkyAlign, Auto 2-Star Align, 1-Star Align, 2-Star Align, Solar System Align\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Connection\u003c\/td\u003e\n\u003ctd\u003eUSB Type-B Port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Compatibility\u003c\/td\u003e\n\u003ctd\u003eNexStar SE Series, NexStar SLT Series, NexStar Evolution Series, CPC Series, CPC Deluxe Series, Astro Fi Series, LCM Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eFlash upgradeable via PC and Celestron Firmware Manager (CFM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Celestron NexStar+ Hand Control USB, AZ\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/93982-A.jpg?v=1684347712\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eNexStar+ Hand Control USB, AZ\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Nexstar_Plus_Hand_Controller_USB_Manual.pdf?v=1782186855\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron NexStar+ Hand Control USB Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron Firmware Manager (CFM)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183253789,"sku":"CEL-93981","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-NexStar-Hand-Control-USB-AZ-93981-1__59656.1594230512.1280.1280.jpg?v=1684338305"},{"product_id":"celestron-nexstar-hand-control-usb-eq","title":"Celestron NexStar+ Hand Control USB, EQ","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDirect replacement for Celestron equatorial GoTo mounts\u003c\/li\u003e\n\u003cli\u003eIntuitive menu system for object navigation\u003c\/li\u003e\n\u003cli\u003eFeatures Celestron's All-Star Polar Alignment routine\u003c\/li\u003e\n\u003cli\u003eUSB port allows for direct firmware updates from a PC\u003c\/li\u003e\n\u003cli\u003eCompatible with Advanced VX, CGEM II, CGX, and CGX-L mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron NexStar+ Hand Control USB, EQ\u003c\/h2\u003e\n\u003cp\u003eThe Celestron NexStar+ Hand Control for equatorial mounts is the brain of your GoTo system, providing direct access to a comprehensive database of celestial objects. This USB-equipped controller is the standard-issue accessory for all modern Celestron computerized equatorial mounts, including the Advanced VX, CGEM II, CGX, and CGX-L series. It incorporates Celestron's acclaimed All-Star Polar Alignment routine and allows for direct firmware updates, ensuring your mount's software remains current.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eGoTo Navigation: Accessing a Vast Celestial Catalog\u003c\/h3\u003e\n\u003cp\u003eThis controller puts a massive celestial database at your fingertips. You can automatically slew to objects in the Messier, NGC, and Caldwell catalogs, along with the planets and a curated list of the brightest stars and most popular deep-sky targets. If you're unsure what to observe, the built-in Tour Mode presents a selection of the best objects visible based on your current time and location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAlignment \u0026amp; Setup: All-Star Polar Alignment for Equatorial Mounts\u003c\/h3\u003e\n\u003cp\u003eThe NexStar+ EQ controller's standout feature is the All-Star Polar Alignment procedure. This powerful software routine allows you to achieve a precise polar alignment using any bright star, completely eliminating the need for a direct line of sight to Polaris. This is a critical advantage for observers with obstructed northern horizons. The controller also grants you control over essential settings like customizable maximum slew speeds and programmable slew limits to prevent the telescope from striking the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eConnectivity: USB-Upgradeable Firmware for Future Updates\u003c\/h3\u003e\n\u003cp\u003eEquipped with a USB port, this hand control moves beyond the older serial port models. The USB connection allows you to connect the controller directly to a PC and use the Celestron Firmware Manager (CFM) software. This ensures you can easily load the latest firmware, gaining access to new features, improved tracking algorithms, and bug fixes as Celestron releases them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eNexStar+ EQ vs. AZ: The Critical Difference in Mount Control\u003c\/h3\u003e\n\u003cp\u003eWhile they look identical, the EQ and AZ versions of the NexStar+ hand control are not interchangeable. The firmware is fundamentally different, and choosing the right one is essential for your mount to function.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ EQ (This Model):\u003c\/strong\u003e Contains the specific algorithms required to control an equatorial mount. It understands Right Ascension and Declination, and includes equatorial-specific functions like the All-Star Polar Alignment routine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNexStar+ AZ:\u003c\/strong\u003e Designed for Alt-Azimuth mounts like the CPC, NexStar SE, and Evolution series. Its software is built around Altitude and Azimuth movements and contains alignment routines like SkyAlign. Using an AZ controller on an EQ mount will result in improper tracking and pointing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich Celestron mounts are compatible with this NexStar+ EQ hand control?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis hand control is the standard replacement for current Celestron computerized equatorial mounts. Compatibility is confirmed for the following series: \u003cstrong\u003eAdvanced VX, CGEM II, CGX, and CGX-L\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on my NexStar+ EQ hand control?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eUpdating is done via the built-in \u003cstrong\u003eUSB port\u003c\/strong\u003e. Connect the hand control to your computer using a USB A-to-Mini-B cable (not included) and run the \u003cstrong\u003eCelestron Firmware Manager (CFM)\u003c\/strong\u003e software, which is available for free download from Celestron's website. CFM will automatically detect your device and download the latest firmware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI can't see Polaris from my backyard. Can the NexStar+ EQ controller still help me polar align my CGX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. This is the primary purpose of Celestron's \u003cstrong\u003eAll-Star Polar Alignment\u003c\/strong\u003e routine, which is built into this hand control. After performing a standard two-star alignment, you can select any bright star from the controller's database to refine your polar alignment. The software will calculate the alignment error and guide you on how to adjust the mount's altitude and azimuth knobs for a precise setup, even with Polaris completely hidden.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this EQ hand control on a Celestron NexStar 8SE or other Alt-Az mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This hand control contains firmware written specifically for equatorial mounts. Using it on an Alt-Azimuth mount like a NexStar SE, CPC, or Evolution will cause it to fail to align and track correctly. You must use the AZ version of the NexStar+ hand control for those telescopes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Tour Mode on the NexStar+ EQ controller work with my Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOnce your Advanced VX mount is aligned, you can select \"Tour Mode\" from the menu. The NexStar+ controller will use the current date, time, and your location to generate a curated list of the best objects currently visible in the sky. It will show you a mix of planets, double stars, nebulae, and galaxies, allowing your mount to automatically slew to each one. It's an excellent way to discover new targets during an observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this NexStar+ EQ hand control work wirelessly?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is a cabled hand control that plugs directly into the \"HC\" port on your mount. For wireless control, you would need a separate accessory like the Celestron SkyPortal WiFi Module.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003eAdvanced VX Series, CGEM II Series, CGX Series, CGX-L Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eNexStar+ Hand Control USB, EQ\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_NexStar_Plus_Hand_Control_Troubleshooting_Guide.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron NexStar Plus Hand Control Troubleshooting Guide\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/celestron-firmware-manager\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183352093,"sku":"CEL-93982","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-NexStar-Hand-Control-USB-EQ-93982-1__01514.1594230512.1280.1280.jpg?v=1684338311"},{"product_id":"celestron-skyportal-wifi-module","title":"Celestron SkyPortal WiFi Module","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eControl your Celestron computerized telescope wirelessly\u003c\/li\u003e\n\u003cli\u003eConnects to your mount's AUX port for power and data\u003c\/li\u003e\n\u003cli\u003eDual-band 2.4 GHz and 5 GHz WiFi operation for stable connections\u003c\/li\u003e\n\u003cli\u003eWeighs only 0.8oz (23g) and requires no external batteries\u003c\/li\u003e\n\u003cli\u003eWorks with the free SkyPortal app for iOS\/Android and CPWI software for PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron SkyPortal WiFi Module\u003c\/h2\u003e\n\u003cp\u003eThe Celestron SkyPortal WiFi Module replaces your hand controller with a completely wireless interface, weighing just 0.8oz (23g) and measuring 63.5mm x 50.8mm. This compact module plugs directly into your mount's AUX port for power and enables full GoTo control over 2.4 GHz or 5 GHz WiFi networks using the free SkyPortal app or CPWI software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUntethered GoTo: Full Wireless Control with SkyPortal and CPWI\u003c\/h3\u003e\n\u003cp\u003eOnce connected, your smartphone, tablet, or PC becomes the command center for your entire observing session. The SkyPortal app (iOS\/Android) and Celestron PWI software (Windows) give you complete control over alignment, object selection, and slewing. You can navigate a graphical planetarium and command your telescope to move to any object with a single tap, eliminating the cord wrap and dependency of a physical hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDual-Band 2.4\/5GHz WiFi: Direct Connect \u0026amp; Access Point Modes\u003c\/h3\u003e\n\u003cp\u003eThe SkyPortal module offers two distinct connection methods to adapt to your observing location. In the field, Direct Connect Mode creates its own local WiFi network, allowing you to connect your device directly to the module without any other hardware. At home, Access Point Mode connects the module to your existing home WiFi network, so you can control the telescope while maintaining full internet access for browsing charts or uploading data.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Band Operation:\u003c\/strong\u003e With support for both 2.4 GHz and 5 GHz bands, you can select the frequency with the least interference, ensuring a more stable and responsive connection, especially at crowded star parties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode Switch:\u003c\/strong\u003e A physical switch on the module's side allows you to instantly select between Direct Connect and Access Point modes before powering on your mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LEDs:\u003c\/strong\u003e Onboard LEDs provide immediate visual feedback on the connection mode, network status, and data activity, simplifying troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e0.8oz Design: AUX Port Power and Wide Mount Compatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered for simplicity, the SkyPortal WiFi Module is a true plug-and-play accessory. It draws all necessary power directly from the mount's AUX port, so there are no batteries to charge or replace. At a mere 0.8oz (23g), its addition to the optical train is negligible and requires no rebalancing. The module is compatible with a vast range of modern Celestron computerized mounts, from the NexStar SE\/SLT series to the CGX and CPC lines, installing in just seconds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the advantage of using the SkyPortal WiFi Module over a standard hand controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe SkyPortal WiFi Module provides a graphical, intuitive interface for controlling your telescope via a smartphone or PC. This allows you to tap on objects within a planetarium app to slew the telescope, which is often faster and more engaging than scrolling through menus on a text-based hand controller. It also eliminates cord wrap and allows you to control the mount from a comfortable distance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need an internet connection to use the Celestron SkyPortal WiFi Module in the field?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. Using \u003cstrong\u003eDirect Connect Mode\u003c\/strong\u003e, the module creates its own WiFi hotspot. You connect your phone or tablet directly to this network. This is the standard mode for use at remote dark-sky sites where no other networks are available.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I use Access Point Mode with the SkyPortal WiFi Module?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eAccess Point Mode\u003c\/strong\u003e is ideal for backyard observing. It connects the module to your home WiFi network, allowing your phone or tablet to control the telescope while staying connected to the internet. This lets you use other astronomy apps, check weather updates, or browse online star atlases without disconnecting from your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SkyPortal WiFi Module perform at a crowded star party with an Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe module's dual-band 2.4 GHz and 5 GHz capability is a significant advantage in crowded environments. If the common 2.4 GHz band is saturated with signals from other devices, you can switch the SkyPortal module to the 5 GHz band, which is often less congested, ensuring a more stable and reliable connection to your Advanced VX mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the SkyPortal WiFi Module work with my older NexStar 8 GPS telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the SkyPortal WiFi Module is not compatible with early generation GoTo mounts like the NexStar GPS or Ultima 2000 series. It is designed for modern Celestron mounts that feature an AUX port, such as the NexStar SE, Evolution, CPC, AVX, and CGX series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Celestron SkyPortal WiFi Module require its own battery?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, it is powered entirely through the \u003cstrong\u003eAUX port\u003c\/strong\u003e on your Celestron computerized mount. You do not need any external power supplies, cables, or batteries for the module itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eCelestron computerized mount AUX port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Source\u003c\/td\u003e\n\u003ctd\u003eAUX port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Modes\u003c\/td\u003e\n\u003ctd\u003eDirect Connect Mode, Access Point Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiFi\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz or 5 GHz operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicators\u003c\/td\u003e\n\u003ctd\u003eStatus LEDs for Mode, Connection, and Activity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e63.5mm x 50.8mm x 33.02mm (2.5\" x 2\" x 1.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8oz (23g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron SkyPortal WiFi Module\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183384861,"sku":"CEL-93973","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-SkyPortal-WiFi-Module-93973-1__40221.1594230513.1280.1280.jpg?v=1684338316"},{"product_id":"celestron-skysync-gps-accessory","title":"Celestron SkySync GPS Accessory","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAutomatically provides time, date, and location data from GPS satellites\u003c\/li\u003e\n\u003cli\u003eConnects to your Celestron telescope's hand control or AUX port\u003c\/li\u003e\n\u003cli\u003eSimplifies and accelerates GoTo alignment accuracy\u003c\/li\u003e\n\u003cli\u003eIncludes mounting straps for secure attachment to a tripod leg\u003c\/li\u003e\n\u003cli\u003eCovered by a 2-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron SkySync GPS Accessory\u003c\/h2\u003e\n\u003cp\u003eThe Celestron SkySync GPS Accessory adds crucial time, date, and location automation to your Celestron computerized telescope, backed by a 2-Year Warranty to ensure your alignment process is fast and accurate for years to come.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAutomated Alignment Data: Your Mount's Missing GPS Link\u003c\/h3\u003e\n\u003cp\u003eThe single most critical step for accurate GoTo performance is providing the mount with a precise time, date, and location. The SkySync automates this entirely by linking your telescope directly to the Global Positioning System, eliminating the need to manually enter information from a watch or smartphone in the dark. This direct data feed makes every alignment faster and more reliable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePlug-and-Play Integration with a 2-Year Warranty\u003c\/h3\u003e\n\u003cp\u003eDesigned for seamless operation, the SkySync GPS unit plugs directly into your telescope's hand control or an available AUX port on the mount base. It draws power directly from the mount, requiring no separate batteries. With the included straps, the module secures neatly to a tripod leg, keeping it out of the way while maintaining a clear view of the sky, all protected by a Celestron 2-Year Warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSkySync vs. Manual Entry: Why GPS Accuracy Matters\u003c\/h3\u003e\n\u003cp\u003eWhile a smartphone can provide location data, the SkySync offers key advantages for serious observation. It's a dedicated device that doesn't require you to check a bright screen, preserving your night vision. More importantly, it provides a direct, satellite-accurate data stream that is always up-to-date, removing any chance of human error when entering coordinates or accounting for Daylight Saving Time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire and Forget:\u003c\/strong\u003e Once connected, the SkySync works automatically every time you power on your telescope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreserves Night Vision:\u003c\/strong\u003e No need to consult a bright phone screen during your setup routine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffline Reliability:\u003c\/strong\u003e Works anywhere in the world, even in remote dark-sky sites with no cellular service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SkySync GPS Accessory improve my GoTo alignment?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAccurate GoTo slewing and tracking depend on the mount knowing its precise location, the date, and the exact time. The SkySync GPS Accessory automates this by pulling data directly from GPS satellites. This eliminates typos and incorrect time entries, which are common sources of alignment failure, resulting in significantly more accurate GoTo performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the SkySync GPS Accessory compatible with all Celestron telescopes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe SkySync is designed to work with Celestron's computerized telescopes. It connects via the AUX port on the mount or through the port on the bottom of the hand controller (like the NexStar+). If your telescope has a computerized GoTo mount, the SkySync is the standard GPS accessory for it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhere do I plug in the Celestron SkySync?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou can plug the SkySync into any open Auxiliary (AUX) port on your Celestron mount's drive base. If no AUX ports are free, you can also plug it into the port on the base of your NexStar+ hand control. The included straps then allow you to secure the module to a tripod leg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the SkySync need batteries or a separate power source?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the SkySync GPS Accessory is powered directly by the telescope's mount through the AUX port connection. It does not require any separate batteries or power cables.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SkySync help with tracking planets like Jupiter on my Advanced VX mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor an equatorial mount like the Advanced VX, a precise initial alignment is critical for accurate, long-term tracking. By providing satellite-accurate time and location data, the SkySync ensures your initial All-Star Polar Alignment or 2-Star Align is built on a perfect foundation. This results in Jupiter (or any other object) staying centered in the eyepiece for longer periods, which is especially important for high-magnification planetary imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm at a dark sky site with no cell service. Will the SkySync still provide an accurate location for aligning my NexStar 8SE?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, absolutely. This is a primary advantage of the SkySync. It communicates directly with orbiting GPS satellites and does not rely on cellular or Wi-Fi networks. This guarantees that your NexStar 8SE will get a fast, accurate location lock, even at the most remote observing sites.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Celestron SkySync GPS Accessory\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/93969-1-800x800_1.webp?v=1708722420\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eSkySync GPS Accessory\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Mounting Straps for SkySync GPS\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/%20straps-placeholder.jpg\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMounting Straps\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software \u0026amp; Manuals\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183417629,"sku":"CEL-93969","price":271.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-SkySync-GPS-Accessory-93969-1__63914.1594230513.1280.1280.jpg?v=1684338318"},{"product_id":"celestron-starsense-autoalign","title":"Celestron StarSense AutoAlign","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eReplaces manual alignment with automated plate-solving\u003c\/li\u003e\n\u003cli\u003e1.2 Megapixel CMOS sensor with 3.75µm pixels\u003c\/li\u003e\n\u003cli\u003eFast f\/2, 20mm 2-element objective lens\u003c\/li\u003e\n\u003cli\u003eIncludes dedicated hand controller with a 45,178 object database\u003c\/li\u003e\n\u003cli\u003eAdvanced mount modeling with up to 10 calibration stars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron StarSense AutoAlign\u003c\/h2\u003e\n\u003cp\u003eThe Celestron StarSense AutoAlign automates your telescope's alignment using its 1.2 Megapixel Aptina CMOS sensor and a 1280 x 960 pixel array to capture images of the sky. Its fast, 2-element 20mm f\/2 lens gathers enough light for the onboard 32-bit processor to plate-solve your location in minutes. The included hand controller gives you full GoTo access to a 45,178 object database, completely replacing the time-consuming manual 2-star alignment process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e3-Minute Plate-Solving with a 1.2MP Camera\u003c\/h3\u003e\n\u003cp\u003eStarSense eliminates the most tedious part of setting up a computerized telescope. Instead of manually finding and centering alignment stars, you simply attach the StarSense camera, which uses its 1.2MP sensor and 3.75μm pixels to take a series of images. In about three minutes, the system automatically identifies star patterns, matches them against its internal database, and calculates the precise pointing direction of your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 45,178-Object StarSense Controller\u003c\/h3\u003e\n\u003cp\u003eThis accessory replaces your standard NexStar hand control with the dedicated StarSense controller. It features a red backlit 4-line LCD for preserving night vision and provides access to a comprehensive database of 45,178 celestial objects. Once aligned, the \"Sky Tour\" feature automatically slews your telescope to the best planets, galaxies, and nebulae currently visible from your location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e10-Star Calibration for Imaging Accuracy\u003c\/h3\u003e\n\u003cp\u003eFor astrophotographers who demand the highest pointing accuracy, StarSense replaces expensive PC-based mount modeling software. After the initial auto-alignment, you can add up to 10 additional calibration stars across the sky. This builds a sophisticated pointing model that corrects for mechanical errors, ensuring your target is perfectly centered in your camera's field of view, from horizon to horizon.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eStarSense AutoAlign vs. Manual Alignment: Beyond the 2-Star Method\u003c\/h3\u003e\n\u003cp\u003eA traditional 2-star alignment requires you to know the names of bright stars, find them in a finderscope, and center them in an eyepiece. StarSense requires no prior knowledge and is typically more accurate. Unlike PC-based plate-solving, StarSense is a completely self-contained system that requires no laptop, external software, or internet connection at the telescope, making it a faster and more portable solution for achieving perfect GoTo performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Celestron StarSense AutoAlign work?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eCelestron StarSense AutoAlign\u003c\/strong\u003e uses a small digital camera with a \u003cstrong\u003e1.2MP CMOS sensor\u003c\/strong\u003e to take pictures of the night sky. Its internal \u003cstrong\u003e32-bit processor\u003c\/strong\u003e analyzes these images, identifies the star patterns, and compares them to its built-in sky map. This process, called plate-solving, allows it to calculate the exact direction the telescope is pointing and perform a highly accurate GoTo alignment automatically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat telescopes are compatible with the StarSense AutoAlign?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is designed to work with most modern computerized Celestron telescopes. It connects directly to the mount's \u003cstrong\u003eAuxiliary Port\u003c\/strong\u003e, replacing the standard NexStar+ hand control. It is compatible with nearly all Celestron GoTo mounts, including NexStar SE, CPC, CGEM, and Advanced VX series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the StarSense AutoAlign for astrophotography?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is an excellent tool for astrophotographers. Its primary benefit is providing a very accurate initial GoTo alignment. For advanced users, the ability to build a pointing model with up to 10 calibration stars ensures that faint deep-sky objects are placed precisely on your imaging sensor, saving valuable time when framing your target.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the StarSense AutoAlign need a clear view of the whole sky?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, it does not need a full 360° view. The \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is robust enough to perform an alignment even with partially obstructed skies, such as from a backyard with trees or houses. It slews to different areas of the sky, and as long as it can capture enough clear patches to identify star patterns, it will successfully complete the alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the StarSense AutoAlign's pointing accuracy compare to a manual 2-star alignment for finding faint objects like the Whirlpool Galaxy (M51)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e is typically more accurate than a manual 2-star alignment because it uses a camera to precisely measure star positions, removing the human error of centering by eye. For a faint target like the Whirlpool Galaxy (M51), this increased accuracy means the object is more likely to be in the field of view of a low-power eyepiece on the first try, saving you from having to hunt for it manually.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the StarSense AutoAlign work from my light-polluted backyard on a target like the Hercules Cluster (M13)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The \u003cstrong\u003eStarSense AutoAlign\u003c\/strong\u003e camera and software are sensitive enough to detect the necessary alignment stars even through moderate light pollution. It can successfully align your telescope from most suburban locations, allowing you to easily find bright globular clusters like the Hercules Cluster (M13) and other showpiece objects without issue.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImaging Sensor\u003c\/td\u003e\n\u003ctd\u003eAptina MT9M034 1.2 Megapixel CMOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePixel Array\u003c\/td\u003e\n\u003ctd\u003e1280 x 960\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePixel Size\u003c\/td\u003e\n\u003ctd\u003e3.75μm x 3.75μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObjective Lens\u003c\/td\u003e\n\u003ctd\u003e2-Element 20mm (0.78\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocal Length\u003c\/td\u003e\n\u003ctd\u003e40mm (1.57\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocal Ratio\u003c\/td\u003e\n\u003ctd\u003ef\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e45,178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003eSTMicro ARM 32-bit Cortex™-M3 CPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Board\u003c\/td\u003e\n\u003ctd\u003e32-bit processor with embedded Linux Operating System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLCD\u003c\/td\u003e\n\u003ctd\u003eRed backlit 4 Line LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Port\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Port\u003c\/td\u003e\n\u003ctd\u003eConnects to Celestron telescopes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Port\u003c\/td\u003e\n\u003ctd\u003ePC connectable for software\/firmware upgrades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eFully upgradable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_StarSense_AutoAlign_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron StarSense AutoAlign Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/celestron-firmware-manager\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183483165,"sku":"CEL-94005","price":666.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-StarSense-AutoAlign-94005-1__39047.1594230514.1280.1280.jpg?v=1684338324"},{"product_id":"celestron-starsense-autoalign-for-sky-watcher-mounts","title":"Celestron StarSense AutoAlign for Sky-Watcher Mounts","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAutomatically aligns your Sky-Watcher mount in minutes\u003c\/li\u003e\n\u003cli\u003eReplaces manual star alignment with advanced plate-solving technology\u003c\/li\u003e\n\u003cli\u003eCompatible with HEQ5, EQ6, AZ-EQ5, AZ-EQ6, EQ8 and other SynScan mounts\u003c\/li\u003e\n\u003cli\u003eIncludes StarSense camera, hand control, and interface box\u003c\/li\u003e\n\u003cli\u003e2-Year Celestron Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron StarSense AutoAlign for Sky-Watcher Mounts\u003c\/h2\u003e\n\u003cp\u003eThe Celestron StarSense AutoAlign for Sky-Watcher Mounts brings Celestron's revolutionary, hands-free alignment technology to a wide range of popular Sky-Watcher platforms, including the HEQ5, EQ6, AZ-EQ5, AZ-EQ6, and EQ8 mounts. This complete kit, which includes the StarSense camera, specialized hand controller, and an interface box, automates your entire alignment process, getting you from setup to observing in just a few minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e3-Minute Alignment: Celestron's StarSense Plate-Solving for Sky-Watcher\u003c\/h3\u003e\n\u003cp\u003eStarSense technology eliminates the need to manually identify and center alignment stars. The included camera takes a series of images of the night sky, automatically plate-solving them against its internal database to calculate the exact pointing direction of your telescope. This process is faster and more accurate than traditional 2-star or 3-star manual alignments, saving valuable time at the beginning of an observing or imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePlug-and-Play with 6+ Sky-Watcher Mounts\u003c\/h3\u003e\n\u003cp\u003eThis version of StarSense is engineered specifically for seamless integration with Sky-Watcher's SynScan ecosystem. The hardware is designed for a simple, direct connection: the StarSense camera and hand control connect to the interface box, which then plugs directly into your mount's hand control port. There is no complex wiring or software configuration required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Mount Compatibility:\u003c\/strong\u003e Full support for HEQ5, EQ6, AZ-EQ5, AZ-EQ6, EQ8, and any other mount using the Sky-Watcher SynScan control system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-in-One Kit:\u003c\/strong\u003e The package includes the camera, hand control, interface box, and mounting brackets for a complete conversion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplified Setup:\u003c\/strong\u003e Once connected, the StarSense hand control takes over, guiding you through the quick, automated alignment procedure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the StarSense AutoAlign for Sky-Watcher work if my view is partially blocked by trees?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe StarSense technology is robust enough to handle partially obstructed skies. It takes multiple images across different parts of the sky. As long as it can \"see\" enough stars in a few of these regions to plate-solve, it can build an accurate pointing model and complete the alignment successfully.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the StarSense AutoAlign difficult to install on my Sky-Watcher EQ6-R Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the installation is straightforward. The kit includes both large and small mounting brackets designed to fit a wide variety of optical tubes. You simply attach the bracket and camera to your telescope, plug the camera and StarSense hand control into the interface box, and connect the interface box to the mount's hand control port. The system is designed for a plug-and-play experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use my original Sky-Watcher SynScan hand controller after installing the StarSense AutoAlign?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the included StarSense hand control must be used to operate the mount once the StarSense AutoAlign is connected. It contains the necessary software to run the alignment camera and control the mount. It replaces your standard SynScan controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the StarSense AutoAlign improve my GoTo accuracy for imaging Jupiter with an 8\" Newtonian on an HEQ5 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. By using plate-solving, the StarSense creates a more precise pointing model of the sky than a typical two or three-star manual alignment. This results in significantly better GoTo accuracy, ensuring that objects like Jupiter will be centered in the eyepiece or on your imaging sensor on the first try.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the StarSense AutoAlign for Sky-Watcher require a PC to function?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the entire system is self-contained. The StarSense camera, hand control, and interface box manage the entire alignment process without the need for an external computer, laptop, or internet connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main benefit of the StarSense AutoAlign over my mount's standard alignment routine?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary benefits are speed and accuracy. StarSense automates the entire process, removing the need for you to know the names of stars or spend time carefully centering them. It performs a sophisticated alignment in minutes, allowing you to spend more of your time observing or imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003eSky-Watcher HEQ5, EQ6, AZ-EQ5, AZ-EQ6, EQ8, and other AZ SynScan compatible mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"StarSense Hand Control\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eStarSense Hand Control\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"StarSense Camera with mounting brackets\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eStarSense Camera\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003ewith large and small mounting brackets\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Interface Box for StarSense\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eInterface Box\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cimg class=\"DAV-img-box\" alt=\"Cable, camera to mount\" src=\"\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCamera to Mount Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_StarSense_AutoAlign_for_Sky-Watcher_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron StarSense for Sky-Watcher Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Celestron Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183548701,"sku":"CEL-94006","price":916.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-StarSense-AutoAlign-for-Sky-Watcher-Mounts-94006-1__19255.1594230515.1280.1280.jpg?v=1684338329"},{"product_id":"celestron-starsense-hand-control-usb","title":"Celestron StarSense Hand Control USB","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUnlocks StarSense AutoAlign accessory functionality\u003c\/li\u003e\n\u003cli\u003e40,000-object database with detailed information\u003c\/li\u003e\n\u003cli\u003eDirect PC connection via Mini-USB for firmware updates and software control\u003c\/li\u003e\n\u003cli\u003eDual-line, 16-character LCD screen with adjustable red backlighting\u003c\/li\u003e\n\u003cli\u003e2-Year Celestron Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eCelestron StarSense Hand Control USB\u003c\/h2\u003e\n\u003cp\u003eThe Celestron StarSense Hand Control USB is the required controller for the StarSense AutoAlign accessory, unlocking the fastest and easiest alignment process available for your Celestron computerized mount. This controller features a 40,000-object database and a clear dual-line, 16-character LCD screen for navigating the night sky. With its built-in Mini-USB port, this updated model allows for direct connection to a PC for fast firmware updates and optional telescope control with third-party software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 40,000-Object Database for StarSense AutoAlign\u003c\/h3\u003e\n\u003cp\u003eWhile the StarSense AutoAlign camera handles the sky recognition, this hand control is the brain of the operation. It contains the 40,000-object database that the system uses to identify stars and slew to your desired targets. The intuitive menu system makes it simple to select from catalogs of galaxies, nebulae, star clusters, and planets, turning your telescope into a powerful tool for discovery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePC Control via Mini-USB for 2-Minute Firmware Updates\u003c\/h3\u003e\n\u003cp\u003eThis version of the StarSense Hand Control eliminates the need for older serial-to-USB adapters. A direct Mini-USB port provides a stable, modern connection to your PC. This makes firmware updates from Celestron's website a straightforward process and opens up the ability to control your telescope directly from popular planetarium software for a fully integrated observing experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eStarSense Hand Control vs. Standard NexStar+ Hand Controller\u003c\/h3\u003e\n\u003cp\u003eThe primary difference is system compatibility. The StarSense Hand Control is the only controller that works with the StarSense AutoAlign accessory. In contrast, the standard NexStar+ Hand Controller that comes with most Celestron mounts cannot operate the StarSense camera. This StarSense model is a required upgrade to enable automatic alignment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarSense Hand Control:\u003c\/strong\u003e Required for StarSense AutoAlign. Has a Mini-USB port for modern PC connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard NexStar+ Hand Controller:\u003c\/strong\u003e Cannot operate StarSense. Older versions may require a serial port adapter for PC connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMount Compatibility: Check Your Setup for Over 15 Celestron Series\u003c\/h3\u003e\n\u003cp\u003eIt is critical to understand that this hand control will not function without the StarSense AutoAlign accessory (sold separately) plugged into your mount's AUX port. It is not a standalone upgrade. The only exception is the SkyProdigy series, which has StarSense technology built-in. Before purchasing, confirm your mount is on the compatibility list, which includes the Advanced VX, CGEM II, CGX, CPC, NexStar Evolution, SE, and SLT series, among others.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need the StarSense AutoAlign camera for this StarSense Hand Control to work?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes, absolutely.\u003c\/strong\u003e This hand control is specifically designed to operate the StarSense AutoAlign accessory. It will not function as a standalone controller on a compatible mount without the StarSense camera also connected. The only exception is the SkyProdigy series of telescopes, which already have the StarSense technology integrated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the StarSense Hand Control over the standard NexStar+ controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe sole purpose of the StarSense Hand Control is to enable the use of the \u003cstrong\u003eStarSense AutoAlign accessory\u003c\/strong\u003e. This accessory automates your telescope's alignment process, typically in under three minutes. The standard NexStar+ controller cannot communicate with the StarSense accessory. This hand control also features a direct Mini-USB port for easier firmware updates and PC control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the StarSense Hand Control to control my Advanced VX mount with planetarium software?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Mini-USB port on the bottom of the StarSense Hand Control allows you to connect it directly to a computer. With the correct drivers and ASCOM platform installed, you can then control your Advanced VX mount using popular software like Stellarium, Cartes du Ciel, or Starry Night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I update the firmware on the StarSense Hand Control USB?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou can update the firmware by connecting the hand control to your PC using a Mini-USB cable (not included). Download the Celestron Firmware Manager (CFM) software from the Celestron website. CFM will automatically detect the hand control and download the latest firmware updates for both the controller and any connected accessories like the StarSense camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this StarSense Hand Control work with my older Celestron NexStar GPS series telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the StarSense Hand Control and the StarSense AutoAlign accessory are not compatible with older mounts like the NexStar GPS, NexStar i Series, or Ultima 2000. Please refer to the official compatibility list to ensure your mount is supported.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I have a SkyProdigy telescope, do I need to buy this hand control?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe SkyProdigy series already includes StarSense technology and comes with a StarSense-enabled hand controller. This product would serve as a direct replacement if your original SkyProdigy hand controller is lost or damaged. You do not need the separate StarSense AutoAlign accessory with a SkyProdigy telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eObject Database\u003c\/td\u003e\n\u003ctd\u003e40,000+ objects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eDual line, 16-character LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBacklighting\u003c\/td\u003e\n\u003ctd\u003eAdjustable, Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Connection\u003c\/td\u003e\n\u003ctd\u003eMini-USB Port (cable not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eFlash Upgradeable via Celestron Firmware Manager\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Requirement\u003c\/td\u003e\n\u003ctd\u003eStarSense AutoAlign Accessory (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eStarSense Hand Control with USB\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"DAV-subtext\"\u003e\n\u003cp\u003eNote: A Mini-USB cable is required for PC connection and firmware updates but is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_StarSense_Accessory_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload StarSense Accessory Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Celestron_Nexstar_Plus_Hand_Controller_USB_Manual.pdf?v=1782186855\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload NexStar+ USB Hand Control Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.celestron.com\/pages\/drivers-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eCelestron Drivers \u0026amp; Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product is covered by Celestron's 2-Year Limited Warranty. For complete warranty information, please visit the \u003ca href=\"https:\/\/davidastro.com\/pages\/celestron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eCelestron Warranty Policy\u003c\/a\u003e page.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Celestron","offers":[{"title":"Default Title","offer_id":44967183581469,"sku":"CEL-93999","price":200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Celestron-StarSense-Hand-Control-USB-93999-1__52294.1594230515.1280.1280.jpg?v=1684338331"},{"product_id":"sky-watcher-synscan-wifi-adapter","title":"Sky-Watcher SynScan Wifi Adapter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eEnables full wireless control of all Sky-Watcher GoTo mounts\u003c\/li\u003e\n\u003cli\u003eOperated via the free SynScan Pro app for iOS and Android\u003c\/li\u003e\n\u003cli\u003eReplaces the traditional hand controller with your smartphone or tablet\u003c\/li\u003e\n\u003cli\u003eIncludes both 6-to-8 pin (AZ) and 8-to-8 pin (EQ) cables\u003c\/li\u003e\n\u003cli\u003eCreates its own WiFi network; no internet connection required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSky-Watcher SynScan WiFi Adapter\u003c\/h2\u003e\n\u003cp\u003eThe Sky-Watcher SynScan WiFi Adapter modernizes your observing setup by enabling full wireless GoTo control from your smartphone or tablet. It connects directly to your mount's hand controller port using the included 6-to-8 pin or 8-to-8 pin cable, replacing the physical controller entirely. With the robust SynScan Pro app, available for both iOS and Android, you gain a graphical, intuitive interface for alignment, object selection, and slewing, all without the tangle of extra wires at the telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eControl Your Mount from the SynScan Pro App\u003c\/h3\u003e\n\u003cp\u003eThis adapter transforms your personal device into a powerful, full-featured astronomical controller. The SynScan Pro app is more than a simple remote; it contains a database of celestial objects, advanced alignment routines, and telescope status information, all accessible from a familiar touch interface. The app connects to the adapter's self-generated WiFi network, meaning you don't need an active internet connection or router in the field to operate your telescope.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull GoTo Functionality:\u003c\/strong\u003e Access alignment procedures, slew to objects from the internal database, and sync on targets just as you would with the physical hand controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntuitive Interface:\u003c\/strong\u003e Navigate the sky using a graphical planetarium interface on your device, making object selection faster and more intuitive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Internet Required:\u003c\/strong\u003e The module acts as its own WiFi access point, ensuring a reliable connection even at remote dark-sky sites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSynScan WiFi Adapter vs. the SynScan V5 Hand Controller\u003c\/h3\u003e\n\u003cp\u003eWhile the standard V5 hand controller is a reliable tool, the SynScan WiFi Adapter offers a fundamentally different operating experience. The primary trade-off is moving from a dedicated, physical keypad to a screen-based app on a device you already own.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser Interface:\u003c\/strong\u003e The adapter allows for a richer, graphical planetarium interface on a larger color screen, which many users find easier to navigate than the text-based menus of the hand controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e The WiFi adapter draws power from the mount, but your smartphone or tablet's battery life becomes a factor for long observing sessions. The hand controller has no such dependency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Updates:\u003c\/strong\u003e Updating the app is typically faster and easier through your device's app store than updating the firmware on a physical hand controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Feedback:\u003c\/strong\u003e The hand controller offers tactile feedback from physical buttons, which can be easier to operate with gloves on in cold weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUniversal Compatibility with Sky-Watcher GoTo Mounts\u003c\/h3\u003e\n\u003cp\u003eThe SynScan WiFi Adapter is engineered to work with the entire line of Sky-Watcher's SynScan-equipped GoTo mounts. To ensure broad compatibility across different mount types and generations, two separate cables are included in the box. This eliminates any guesswork when connecting to your specific equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Equatorial Mounts:\u003c\/strong\u003e Use the included 8-pin-to-8-pin cable for models like the EQ6-R Pro, HEQ5, AZ-EQ5, and AZ-EQ6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Alt-Azimuth Mounts:\u003c\/strong\u003e Use the 6-pin-to-8-pin cable for mounts like the AZ-GTi (in EQ mode), SolarQuest, and other AZ models with a 6-pin port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant Note:\u003c\/strong\u003e This adapter is not compatible with the Sky-Watcher Star Adventurer or Star Adventurer Mini tracking platforms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect the SynScan WiFi Adapter to my Sky-Watcher EQ6-R Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor the EQ6-R Pro and other Sky-Watcher equatorial mounts, you will use the included \u003cstrong\u003e8-pin-to-8-pin cable\u003c\/strong\u003e. Plug one end into the port on the WiFi adapter and the other end into the port on the mount labeled \"Hand Control.\" Then, power on your mount, search for the SynScan WiFi network on your phone, and connect to it before opening the SynScan Pro app.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the SynScan WiFi Adapter for astrophotography with software like N.I.N.A. or an ASIAIR?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The SynScan WiFi Adapter creates a network that allows computer control. You can connect your capture computer or an ASIAIR to the adapter's WiFi network. In your control software, you will typically select the \"SynScan App\" or \"SynScan Mobile\" driver to establish a connection with the mount for slewing, guiding, and plate solving.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the SynScan WiFi Adapter require an internet connection to work in the field?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, an internet connection is not required. The adapter generates its own local WiFi network. You simply connect your smartphone, tablet, or computer directly to this \"SynScan\" network to communicate with the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill the SynScan WiFi Adapter work with my Sky-Watcher Star Adventurer 2i?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The SynScan WiFi Adapter is \u003cstrong\u003enot compatible\u003c\/strong\u003e with the Star Adventurer or Star Adventurer Mini. These platforms have their own built-in WiFi for controlling settings via the Star Adventurer Console app and are not GoTo systems in the same way as the larger SynScan mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the main advantages of using the SynScan WiFi Adapter over the standard hand controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantages are a modern, graphical user interface on a device you already own, the elimination of a coiled cable that can snag in the dark, and easier updates via the app store. The visual planetarium display in the SynScan Pro app makes finding and identifying targets much more intuitive than scrolling through text-based menus.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich cable do I use for my Sky-Watcher mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe adapter includes two cables to fit all compatible mounts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the \u003cstrong\u003e8-pin-to-8-pin cable\u003c\/strong\u003e for most equatorial mounts (HEQ5, EQ6-R, AZ-EQ6, etc.).\u003c\/li\u003e\n\u003cli\u003eUse the \u003cstrong\u003e6-to-8-pin cable\u003c\/strong\u003e for alt-azimuth mounts that have a 6-pin hand controller port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eAll Sky-Watcher SynScan GoTo mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible With\u003c\/td\u003e\n\u003ctd\u003eSky-Watcher Star Adventurer, Star Adventurer Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl App\u003c\/td\u003e\n\u003ctd\u003eSynScan Pro (iOS and Android)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eCreates its own WiFi network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCables Included\u003c\/td\u003e\n\u003ctd\u003e6-pin to 8-pin (for AZ mounts), 8-pin to 8-pin (for EQ mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eSynScan WiFi Adapter\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e6-pin to 8-pin Cable (for AZ Mounts)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e8-pin to 8-pin Cable (for EQ Mounts)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.skywatcherusa.com\/pages\/firmware-and-software\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload SynScan Pro App\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/sky-watcher-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSky-Watcher 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sky-Watcher","offers":[{"title":"Default Title","offer_id":44967194460445,"sku":"SW-S30103","price":100.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Sky-Watcher-SynScan-Wifi-Adapter-S30103-1__29055.1594170811.1280.1280.jpg?v=1684338634"},{"product_id":"sky-watcher-synscan-gps-module","title":"Sky-Watcher SynScan GPS Module","description":"\u003cul class=\"DAV-feature-list\"\u003e\n  \u003cli\u003eAutomatically inputs GPS data: time, date, and location\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Sky-Watcher SynScan hand controllers\u003c\/li\u003e\n  \u003cli\u003eAccelerates mount alignment and setup\u003c\/li\u003e\n  \u003cli\u003eIncreases GoTo pointing accuracy\u003c\/li\u003e\n  \u003cli\u003eSimple plug-and-play operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n  \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n  \u003cli\u003eFAQ\u003c\/li\u003e\n  \u003cli\u003eSpecifications\u003c\/li\u003e\n  \u003cli\u003eIn the Box\u003c\/li\u003e\n  \u003cli\u003eDownloads\u003c\/li\u003e\n  \u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n  \u003cli class=\"active\"\u003e\n    \u003cdiv\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section-center\"\u003e\n          \u003ch2\u003eSky-Watcher SynScan GPS Module\u003c\/h2\u003e\n          \u003cp\u003eThe Sky-Watcher SynScan GPS Module eliminates the most tedious part of setting up your GoTo mount by automatically feeding precise time, date, and location data directly to your SynScan hand controller. This simple, plug-in accessory ensures your mount's alignment is based on accurate global positioning data, leading to significantly more accurate GoTo slews and tracking right from the start of your session.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eAutomated Initialization for Any SynScan Mount\u003c\/h3\u003e\n          \u003cp\u003eSetting up a computerized mount requires entering your precise latitude, longitude, date, and local time. The SynScan GPS Module automates this entire process. Once connected, it acquires a satellite lock and populates all required fields on the hand controller, saving you valuable field time and removing the risk of manual entry errors that can compromise pointing accuracy.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eImproved GoTo Accuracy from the First Star\u003c\/h3\u003e\n          \u003cp\u003eA GoTo system's accuracy is fundamentally dependent on the quality of its initial alignment data. By providing real-time, satellite-derived location and time information, the SynScan GPS Module gives your mount a more precise foundation for its sky model. This translates directly to more accurate pointing, placing objects closer to the center of your eyepiece or camera sensor on the first slew.\u003c\/p\u003e\n          \u003cul\u003e\n            \u003cli\u003e\n              \u003cstrong\u003eTime Savings:\u003c\/strong\u003e Skips the need to check your watch or phone and manually input multiple data points before you can begin alignment.\n            \u003c\/li\u003e\n            \u003cli\u003e\n              \u003cstrong\u003eError Reduction:\u003c\/strong\u003e Eliminates typos in coordinates or mistakes with time zones and daylight saving settings that are common sources of alignment failure.\n            \u003c\/li\u003e\n            \u003cli\u003e\n              \u003cstrong\u003eTravel Ready:\u003c\/strong\u003e For observers who travel to different dark sky sites, the module makes setup effortless—just plug it in, and your new location is automatically detected.\n            \u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"DAV-bg-light\"\u003e\n        \u003cdiv class=\"DAV-section\"\u003e\n          \u003ch3\u003eUniversal Plug-and-Play Compatibility\u003c\/h3\u003e\n          \u003cp\u003eThe SynScan GPS Module is engineered for seamless integration with the entire ecosystem of Sky-Watcher GoTo mounts. It connects to the dedicated port on any mount equipped with a SynScan hand controller, from the portable Star Adventurer GTi to the observatory-class EQ8-R Pro. There is no software to install or complex configuration required; the hand controller automatically recognizes the module upon connection.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the SynScan GPS Module improve my alignment on an EQ6-R Pro?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eThe SynScan GPS Module automates the first, most critical step of your alignment. Instead of you manually entering the date, time, latitude, and longitude into the SynScan hand controller for your EQ6-R Pro, the module does it for you with high precision. This removes any chance of human error and provides the mount with a more accurate starting point, resulting in better initial GoTo slews.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eI travel to different imaging sites with my HEQ5. Is the SynScan GPS Module worth it?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eAbsolutely. For a traveling astrophotographer, the SynScan GPS Module is a significant time-saver. Each time you set up your HEQ5 at a new location, the module will automatically detect the new coordinates and current time. You won't have to look up the latitude and longitude for each new site, making your setup process faster and more consistent every time.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eIs the SynScan GPS Module compatible with my AZ-GTi mount?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eYes, the SynScan GPS Module is compatible with any Sky-Watcher mount that uses a SynScan hand controller, including the AZ-GTi. It will provide the same automatic time and location data to streamline your setup.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the SynScan GPS Module require batteries or an external power source?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eNo, the module draws a small amount of power directly from the mount through the hand controller port. It does not require any separate batteries or power cables.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eHow long does it take for the SynScan GPS Module to acquire a satellite signal?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eFrom a cold start, it typically takes a minute or two to lock onto the GPS satellite network. Subsequent uses are often faster. A clear view of the open sky is required for reliable signal acquisition.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n      \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the SynScan GPS Module with the SynScan Pro App instead of the hand controller?\u003c\/h3\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion-A\"\u003e\n      \u003cp\u003eThe SynScan GPS Module connects physically to the hand controller port on the mount. If you are controlling your mount via Wi-Fi with the SynScan Pro App on your phone, the app will use your phone's internal GPS to get location and time data, making the external GPS module redundant in that specific scenario.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ctable class=\"DAV-specifications\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCompatibility\u003c\/td\u003e\n          \u003ctd\u003eAll Sky-Watcher mounts using a SynScan hand controller\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFunction\u003c\/td\u003e\n          \u003ctd\u003eProvides GPS data (time, date, location) to hand controller\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInterface\u003c\/td\u003e\n          \u003ctd\u003eConnects to SynScan hand controller port\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePower Source\u003c\/td\u003e\n          \u003ctd\u003ePowered by mount (no external power required)\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cul class=\"DAV-grid\"\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\n        \u003cdiv\u003e\n          \u003cp class=\"DAV-item-title\"\u003eSynScan GPS Module\u003c\/p\u003e\n          \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cul class=\"DAV-grid\"\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Sky-Watcher_SynScan_V5_Hand_Control_Manual.pdf\" target=\"_blank\"\u003e\n          \u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n            \u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\n          \u003c\/svg\u003e\n          \u003cdiv\u003e\n            \u003cp class=\"DAV-item-title\"\u003eDownload SynScan V5 Hand Control Manual\u003c\/p\u003e\n          \u003c\/div\u003e\n        \u003c\/a\u003e\u003c\/li\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.skywatcherusa.com\/pages\/apps\" target=\"_blank\"\u003e\n          \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\n            \u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\n          \u003c\/svg\u003e\n          \u003cdiv\u003e\n            \u003cp class=\"DAV-item-title\"\u003eDownload SynScan Pro App\u003c\/p\u003e\n          \u003c\/div\u003e\n        \u003c\/a\u003e\u003c\/li\u003e\n      \u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.skywatcherusa.com\/pages\/firmware-and-software\" target=\"_blank\"\u003e\n          \u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\n            \u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\n          \u003c\/svg\u003e\n          \u003cdiv\u003e\n            \u003cp class=\"DAV-item-title\"\u003eDownload Sky-Watcher Software\u003c\/p\u003e\n          \u003c\/div\u003e\n        \u003c\/a\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/davidastro.com\/pages\/sky-watcher-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSky-Watcher 2-Year Warranty\u003c\/a\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sky-Watcher","offers":[{"title":"Default Title","offer_id":44967194493213,"sku":"SW-S30104","price":300.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Sky-Watcher-SynScan-GPS-Module-S30104-1__66994.1594170811.1280.1280.jpg?v=1684338591"},{"product_id":"baader-network-cable-red-w-coldtemp-specified-cat-7-wire-cat6a-plug-3m-to-30m","title":"Baader Network Cable (red) w\/ ColdTemp-specified CAT-7 Wire (CAT6a plug) - 3m to 30m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eColdTemp-specified CAT-7 Wire\u003c\/li\u003e\n\u003cli\u003eDurable CAT6a RJ45 Plug\u003c\/li\u003e\n\u003cli\u003eHigh-visibility Red Jacket\u003c\/li\u003e\n\u003cli\u003eAvailable in 3m, 5m, 15m, and 30m lengths\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eBaader Network Cable with ColdTemp CAT-7 Wire\u003c\/h2\u003e\n      \u003cp\u003eThe Baader Network Cable ensures your remote imaging sessions remain uninterrupted by cold weather, using ColdTemp-specified CAT-7 wire and a secure CAT6a plug for reliable data transfer. Available in four lengths from 3m to 30m, this cable is engineered to stay flexible and maintain a solid connection when standard network cables turn stiff and brittle in freezing temperatures.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eColdTemp-Rated CAT-7 Wire: Eliminating Frost-Induced Disconnects\u003c\/h3\u003e\n      \u003cp\u003eA dropped network connection is one of the most frustrating failures during a cold night of imaging. Standard PVC-jacketed cables become rigid and can easily lose contact at the slightest movement. Baader's ColdTemp cable uses a specialized jacket and CAT-7 wiring that remains pliable well below freezing, preventing the connection loss that ruins sub-exposures and wastes clear sky time.\u003c\/p\u003e\n      \u003cp\u003eThe internal CAT-7 specification provides superior shielding against electromagnetic interference (EMI) from mount motors, dew heaters, and power supplies. This ensures a clean, stable data signal between your telescope, camera, and control computer, even in an electronically dense pier environment.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003e3m to 30m Lengths: Connecting Your Pier, Dome, or Remote Setup\u003c\/h3\u003e\n      \u003cp\u003eEvery observatory has different cable routing needs. The Baader Network Cable is available in multiple lengths to provide a clean, single-cable solution for your specific setup, minimizing excess cable that can become a snag hazard in the dark.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003e3m and 5m Lengths:\u003c\/strong\u003e Ideal for connecting devices on the pier itself, such as linking a mount's control box to an onboard mini-PC or a SteelDrive II motor to the controller.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003e15m and 30m Lengths:\u003c\/strong\u003e Perfect for longer runs from an outdoor pier to a warm room, or for routing connections around the perimeter of a roll-off roof observatory or dome.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy do I need a special ColdTemp Baader Network Cable for astronomy?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eStandard network cables use PVC jackets that become extremely stiff and brittle in the cold. This rigidity can cause the RJ45 plug to pull slightly out of its socket, leading to intermittent or complete connection loss. The \u003cstrong\u003eBaader ColdTemp Network Cable\u003c\/strong\u003e is designed to remain flexible at low temperatures, ensuring a stable physical and data connection all night long.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the Baader Network Cable's CAT-7 wire with a CAT6a plug?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eWhile the CAT6a plug determines the connection speed, the internal \u003cstrong\u003eCAT-7 wire\u003c\/strong\u003e provides significantly better shielding (S\/FTP - Shielded\/Foiled Twisted Pair) than standard cables. This is critical in an astronomy setup where electrical noise from mount motors, dew heaters, and power supplies can interfere with data signals. You get the benefit of superior noise rejection, ensuring data integrity for your imaging and control commands.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the 30m Baader Network Cable to connect my observatory pier to my indoor PC?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, absolutely. The \u003cstrong\u003e15m and 30m options\u003c\/strong\u003e are specifically intended for these long-distance runs. They allow you to reliably connect your entire remote setup—such as a 10Micron mount or other network-controlled devices—to a control computer or network switch in a warm room or house without signal degradation or weather-related failures.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhich Baader Network Cable length is best for a pier-mounted setup with an Intel NUC?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eFor connecting equipment located entirely on a single pier, the \u003cstrong\u003e3m or 5m Baader Network Cable\u003c\/strong\u003e is typically the best choice. These shorter lengths are perfect for linking a mount's hand controller port to a mini-PC (like a NUC or ASIAIR) mounted on the telescope, minimizing cable drag and snag hazards.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Baader Network Cable compatible with non-Baader equipment?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes. Despite the branding, it is a high-quality, standard network cable with RJ45 connectors (specified as CAT6a plugs). It will work with any astronomy or computer equipment that requires a standard ethernet connection, such as mounts, cameras, focus controllers, and network hubs from any manufacturer.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the red color of the Baader Network Cable help with night vision?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe bright red color is not for preserving night vision but for \u003cstrong\u003ehigh visibility in low light\u003c\/strong\u003e. It makes the cable easy to see on the ground or around the pier when using a red flashlight, helping to prevent trips and snags in the dark.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Specification\u003c\/td\u003e\n\u003ctd\u003eColdTemp-specified CAT-7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlug Specification\u003c\/td\u003e\n\u003ctd\u003eCAT6a RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Lengths\u003c\/td\u003e\n\u003ctd\u003e3m, 5m, 15m, 30m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket Color\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight (kg)\u003c\/td\u003e\n\u003ctd\u003e0.12 (3m)\u003cbr\u003e0.19 (5m)\u003cbr\u003e0.55 (15m)\u003cbr\u003e1.15 (30m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e3 meter (3m)\u003cbr\u003e5 Meter (5m)\u003cbr\u003e15 meter (15m)\u003cbr\u003e30 meter (30m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n      \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eBaader Network Cable (Selected Length)\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/baader-planetarium-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eBaader Planetarium Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baader Planetarium","offers":[{"title":"3m","offer_id":44967372325149,"sku":"BAA-2455043","price":89.0,"currency_code":"CAD","in_stock":true},{"title":"5m","offer_id":44967372357917,"sku":"BAA-2455040","price":107.0,"currency_code":"CAD","in_stock":true},{"title":"15m","offer_id":44967372390685,"sku":"BAA-2455041","price":124.0,"currency_code":"CAD","in_stock":true},{"title":"30m","offer_id":44967372423453,"sku":"BAA-2455042","price":139.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Baader-Network-Cable-red-with-ColdTemp-specified-CAT-7-Wire-CAT6a-plug-3m-to-30m-1__72753.1597111051.1280.1280.jpg?v=1684341323"},{"product_id":"zwo-fan-for-cooled-pro-cameras","title":"ZWO Replacement Fan for ASI Cameras","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eOfficial ZWO OEM replacement fan\u003c\/li\u003e\n\u003cli\u003eRestores original cooling performance to Cooled\/Pro cameras\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eBacked by a 2-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eZWO Replacement Fan for ASI Cooled\/Pro Cameras\u003c\/h2\u003e\n\u003cp\u003eThis official ZWO Replacement Fan is the factory-correct component for restoring full thermal performance to your ASI Cooled or Pro camera, backed by a direct 2-year warranty. If your camera's fan has failed or become noisy, this OEM part ensures you can once again achieve the maximum cooling delta required for clean, low-noise long-exposure imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCompatibility Check: Incompatible with 3 Camera Series\u003c\/h3\u003e\n\u003cp\u003eThis replacement fan is designed specifically for the original generation of ZWO Cooled and Pro cameras. It is critical to confirm your camera model before purchasing, as this fan is not a universal fit. The mechanical housing and electrical connectors are different on newer models.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for Large Format Pro Models:\u003c\/strong\u003e This fan is incompatible with the ZWO ASI6200 and ASI2600 series cameras.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for AIR Models:\u003c\/strong\u003e It will not fit any camera in the ZWO AIR or Smart Camera line, such as the ASI585MC AIR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for Newer Pro Models:\u003c\/strong\u003e It is not compatible with updated Pro cameras that feature the newer sandblasted body finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eOEM Replacement Backed by a 2-Year Warranty\u003c\/h3\u003e\n\u003cp\u003eWhen your camera's active cooling is compromised, thermal noise quickly degrades image quality. This is a genuine ZWO part, guaranteeing the correct airflow and voltage specifications to bring your camera's TEC cooler back to its full potential. The kit includes the necessary mounting hardware for a direct, drop-in replacement, supported by a 2-year warranty for reliable operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I confirm this ZWO Replacement Fan fits my camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe easiest way is to check your camera's model and finish. This fan fits \u003cstrong\u003eoriginal ZWO Cooled and Pro cameras\u003c\/strong\u003e (e.g., ASI1600MM Pro, ASI294MC Pro with the smooth, non-sandblasted finish). It does \u003cstrong\u003enot\u003c\/strong\u003e fit ASI6200\/ASI2600 models, any AIR\/Smart cameras, or any newer Pro cameras with the sandblasted texture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the ZWO Replacement Fan include mounting screws?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the fan comes with the required attachment hardware. You will not need to source any additional screws for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this ZWO Replacement Fan fix my original ASI1600MM Pro that isn't cooling properly?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIf the fan has audibly failed or stopped spinning, then this replacement part is very likely the correct solution. A functioning fan is essential for the thermoelectric cooler (TEC) to dissipate heat. This part is the correct fit for an original ASI1600MM Pro.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI have an ASI2600MC Pro with a dead fan. Is this the correct ZWO replacement fan?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is not the correct part. The ZWO Replacement Fan (ZWO-FAN) is specifically listed as \u003cstrong\u003eincompatible\u003c\/strong\u003e with the ASI2600 and ASI6200 series cameras. You will need to source the specific fan for that camera model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat tools are needed to install the ZWO Replacement Fan?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTypically, you will only need a small Phillips head screwdriver to remove the camera's outer housing and the old fan's mounting screws. The fan connects via a small plug that does not require soldering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the warranty for the ZWO Replacement Fan tied to my camera's original purchase date?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The ZWO Replacement Fan comes with its own independent 2-year warranty that begins from the date you purchase the fan itself, regardless of your camera's warranty status.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eZWO-FAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eOriginal ZWO ASI Cooled and Pro series cameras only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible Models\u003c\/td\u003e\n\u003ctd\u003eASI6200, ASI2600, AIR series, newer Pro models with sandblasted finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eZWO Cooling Fan\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMounting Hardware\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/zwo-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eZWO 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZWO","offers":[{"title":"Fan (40 x 40 x 10mm)","offer_id":50344323514653,"sku":"ZWO-FAN","price":21.0,"currency_code":"CAD","in_stock":true},{"title":"Fan 50 (50 x 50 x 10mm)","offer_id":50344323547421,"sku":"ZWO-FAN-50","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/ZWO-Fan-for-Cooled-Pro-Cameras-1__26682.1596910055.1280.1280.jpg?v=1684341941"},{"product_id":"zwo-shutter-release-cable-for-asiair-pro","title":"ZWO Shutter Release Cable for ASIAIR PRO","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUnlocks bulb exposures beyond 30 seconds on select Nikon DSLRs\u003c\/li\u003e\n\u003cli\u003eConnects ASIAIR PRO or PLUS directly to the camera's shutter port\u003c\/li\u003e\n\u003cli\u003e1-meter (3.3 ft) soft, flexible cable to prevent snags and vibration\u003c\/li\u003e\n\u003cli\u003eFeatures the Nikon N1-type 10-pin (MC-30) remote connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eZWO ASIAIR PRO\/PLUS Shutter Release N1 Cable\u003c\/h2\u003e\n\u003cp\u003eThe ZWO ASIAIR PRO\/PLUS Shutter Release N1 Cable is the critical component for unlocking deep-sky astrophotography with select Nikon DSLRs, breaking the camera's native 30-second exposure limit. This 1-meter cable provides the physical connection needed for the ASIAIR to command your camera's shutter for multi-minute bulb exposures, integrating your DSLR into the ASIAIR ecosystem for fully automated imaging sequences.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBreak the 30-Second Exposure Limit\u003c\/h3\u003e\n\u003cp\u003eStandard DSLR firmware caps exposures at 30 seconds, a significant limitation for capturing faint deep-sky objects. This cable connects your ASIAIR PRO or PLUS directly to your Nikon's 10-pin remote terminal, enabling the ASIAIR app to trigger the shutter in bulb mode for exposures lasting minutes, not seconds. This is the key to revealing faint nebulosity and distant galaxy details that are impossible to capture within the 30-second constraint.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e1-Meter Cable for Clean Rig Management\u003c\/h3\u003e\n\u003cp\u003eAt 1 meter in length, this shutter cable offers enough slack to route from your ASIAIR unit to your camera without creating excess loops that can snag on your mount in the dark. The cable's soft, oblate construction remains flexible in cold temperatures, reducing the risk of transferring vibrations to your imaging train, which helps maintain sharp stars throughout your session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eNikon N1 10-Pin Connector Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis cable is specifically designed with the N1-type connector, which mates to the 10-pin (MC-30 style) remote port found on specific Nikon DSLR bodies. It ensures a secure and reliable electronic connection, allowing for precise shutter control from your ASIAIR. Before purchasing, confirm your camera model is on the compatibility list to ensure proper function.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Nikon Models:\u003c\/strong\u003e D300, D300s, D700, D3, D3s, D3x\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat does the ZWO N1 shutter cable do that a standard USB cable cannot?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile a USB cable allows the ASIAIR to transfer images and control some camera settings, it often cannot control bulb exposures beyond the camera's 30-second limit. The \u003cstrong\u003eZWO N1 shutter release cable\u003c\/strong\u003e connects to the camera's dedicated remote port, giving the ASIAIR direct, physical control over the shutter release mechanism for true, multi-minute bulb exposures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the ZWO N1 cable the correct one for my Nikon D810 or D850?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The D810 and D850 use a different 10-pin connector. This N1 cable is for older models like the D700 and D300s. For the D810, D850, D500, or D5, you will need the ZWO N3 shutter release cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect the ZWO N1 cable with my ASIAIR and Nikon D700?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eConnecting the cable is straightforward:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug the 2.5mm jack into one of the four DSLR shutter release ports on the ASIAIR PRO or PLUS.\u003c\/li\u003e\n\u003cli\u003ePlug the 10-pin N1 connector into the remote terminal on your Nikon D700 (or other compatible camera).\u003c\/li\u003e\n\u003cli\u003eIn the ASIAIR app, ensure your camera is selected and set your exposure plan. The ASIAIR will now trigger the shutter for your planned exposure times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this ZWO N1 cable allow me to capture longer exposures of the Orion Nebula (M42) with my D300?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The Orion Nebula (M42) has very bright and very faint regions. With this cable, you can go beyond the 30-second limit on your D300 to capture 120-second or 180-second exposures. This allows you to record the faint, outer structures of the nebula without blowing out the bright core, which you can capture with shorter exposures and combine later.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this shutter release cable with a Canon or Sony camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This cable features a Nikon-specific N1 10-pin connector. ZWO makes different shutter release cables for Canon (C1\/C3) and Sony (S1\/S2) cameras. You must use the cable that matches your camera's specific remote port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the ZWO N1 cable draw power from the ASIAIR or the camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe cable is a passive trigger mechanism. The small amount of power needed to actuate the shutter signal is provided by the ASIAIR through the DSLR port. It does not draw significant power and has no impact on battery life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eZWO-ASIAIR-N1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eZWO ASIAIR-N1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASIAIR Connector\u003c\/td\u003e\n\u003ctd\u003e2.5mm Jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera Connector\u003c\/td\u003e\n\u003ctd\u003eNikon N1 (10-pin, MC-30 type)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Cameras\u003c\/td\u003e\n\u003ctd\u003eNikon D300, D300s, D700, D3, D3s, D3x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eZWO ASIAIR PRO\/PLUS Shutter Release N1 Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.zwoastro.com\/software\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/zwo-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eZWO 2-Year Limited Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZWO","offers":[{"title":"N1 Cable","offer_id":44967448871197,"sku":"ZWO-ASIAIR-N1","price":14.0,"currency_code":"CAD","in_stock":true},{"title":"N3 Cable","offer_id":44967448903965,"sku":"ZWO-ASIAIR-N3","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/ZWO-Shutter-Release-Cable-for-ASIAIR-PRO-1__33374.1596910060.1280.1280.jpg?v=1684342196"},{"product_id":"zwo-dc-y-splitter-cable","title":"ZWO DC Y Splitter Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePowers two 12V accessories from one source\u003c\/li\u003e\n\u003cli\u003eInput: 1x Male DC Cigarette Lighter Plug\u003c\/li\u003e\n\u003cli\u003eOutput: 2x Female DC Power Connectors\u003c\/li\u003e\n\u003cli\u003eCable Length: 6 inches\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eZWO DC Y Splitter Cable\u003c\/h2\u003e\n\u003cp\u003eThe ZWO DC Y Splitter Cable splits a single power source into 2 separate outputs, providing a 6-inch reach for powering multiple accessories in the field. This power cable is covered by a 2-year warranty, ensuring reliable power management for your portable astrophotography setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePower 2 Accessories from 1 Port\u003c\/h3\u003e\n\u003cp\u003eDesigned for field use, this cable runs two devices from a single cigarette lighter-style power port. It simplifies your power management by reducing the number of cables running to your battery box, keeping your mobile imaging rig clean and organized.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e6-inch Cable with DC Connectors\u003c\/h3\u003e\n\u003cp\u003eThis 6-inch cable features a male DC cigarette lighter plug on one end and terminates in two DC power connectors on the other. This configuration is ideal for connecting accessories to portable power solutions that use automotive-style 12V sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary use for the ZWO DC Y Splitter Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe ZWO DC Y Splitter Cable is designed to take a single power output from a source with a DC cigarette lighter plug and split it into two outputs. This allows you to power two separate 12V accessories simultaneously from one port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat specific connectors does the ZWO DC Y Splitter Cable have?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIt features one male \u003cstrong\u003eDC cigarette lighter plug\u003c\/strong\u003e on the input side (Side A) and terminates in two female \u003cstrong\u003eDC power connectors\u003c\/strong\u003e for the output (Side B), as specified for this 6-inch cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I power two dew heaters from my portable battery pack with the ZWO DC Y Splitter Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, if your battery pack has a DC cigarette lighter output port and your dew heaters use compatible DC power connectors, this 6-inch cable will allow you to power both from that single port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the ZWO DC Y Splitter Cable long enough to reach from a mount to the OTA?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWith a total length of 6 inches, this cable is intended for short connections, such as from a power distribution hub mounted on the telescope to nearby accessories. It is not designed for long cable runs from the ground to the mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this ZWO cable to power my ZWO camera and filter wheel from my car?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable can power devices from a car's cigarette lighter port. You must verify that your specific ZWO camera and filter wheel accept power via the female DC power connectors on this cable and are compatible with a 12V automotive power source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the warranty period for the ZWO DC Y Splitter Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe ZWO DC Y Splitter Cable comes with a 2-year manufacturer's warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eZWO-DC-Y-SPLIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e6 inches with dual RCA termination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Connector (Side A)\u003c\/td\u003e\n\u003ctd\u003eDC - Cigarette Lighter Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connector (Side B)\u003c\/td\u003e\n\u003ctd\u003eDC - Power Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eZWO DC Y Splitter Cable - 1 Male Plug to 2 Female RCA\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.zwoastro.com\/software\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/zwo-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eZWO 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZWO","offers":[{"title":"Default Title","offer_id":44967452836125,"sku":"ZWO-DC-Y-Split","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/ZWO-DC-Y-Splitter-Cable-1__94409.1647980507.1280.1280.jpg?v=1684342318"},{"product_id":"daystar-serial-cable","title":"Daystar Serial Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eEnables PC control of Daystar Quantum series filters\u003c\/li\u003e\n\u003cli\u003eRequired for use with Quantum Control software\u003c\/li\u003e\n\u003cli\u003eAllows for precise, repeatable digital tuning\u003c\/li\u003e\n\u003cli\u003eConnects filter control box to a computer's serial port\u003c\/li\u003e\n\u003cli\u003eDurable construction for reliable data connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eDaystar Serial Cable\u003c\/h2\u003e\n\u003cp\u003eThe Daystar Serial Cable is the essential link for unlocking remote, software-driven control of Daystar's Quantum series solar filters. This cable connects your Quantum filter's controller to a PC, enabling direct communication with the Quantum Control software for precise, automated, and repeatable tuning of the filter's bandpass.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePC Control for Daystar Quantum Filters\u003c\/h3\u003e\n\u003cp\u003eWhile manual tuning of a Daystar Quantum filter is straightforward, connecting it to a computer with the Daystar Serial Cable opens up a new level of precision. The Quantum Control software allows you to digitally dial in the exact wavelength, monitor the etalon temperature, and save specific settings for different solar features, ensuring perfect on-band views every session.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Operation:\u003c\/strong\u003e Ideal for remote observatories or for making fine adjustments from your screen without touching the telescope, which prevents vibrations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated Sequences:\u003c\/strong\u003e Program custom tuning sequences for imaging, such as creating doppler shift animations (blue-shifted and red-shifted views) of active regions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Logging:\u003c\/strong\u003e Monitor and log the filter's temperature and wavelength settings over an imaging session for consistent results and troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Daystar Serial Cable used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Daystar Serial Cable connects a Daystar Quantum series solar filter controller to a personal computer. This connection is required to use the \u003cstrong\u003eQuantum Control software\u003c\/strong\u003e, which allows for remote digital tuning and monitoring of the filter's performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich Daystar products require this serial cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is designed specifically for the \u003cstrong\u003eDaystar Quantum series\u003c\/strong\u003e of Hydrogen-alpha filters (PE and SE grades). If you want to control your Quantum filter from a PC for imaging or remote operation, this cable is a necessary accessory.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need special software to use the Daystar Serial Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The cable enables communication with the free \u003cstrong\u003eQuantum Control software\u003c\/strong\u003e provided by Daystar Filters. You will need to download and install this software on a Windows PC to control the filter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy computer doesn't have a serial port. Can I still use the Daystar Serial Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, in most cases you can use a high-quality \u003cstrong\u003eUSB-to-Serial (RS-232) adapter\u003c\/strong\u003e. These adapters create a virtual COM port on your computer that the Quantum Control software can use. Ensure the adapter has well-supported drivers for your operating system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Daystar Serial Cable help with imaging solar prominences versus surface detail?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe cable, paired with the software, allows for precise \"wing-shifting.\" You can digitally tune the filter slightly off the central H-alpha wavelength to better view doppler-shifted features. This is critical for enhancing the contrast of fast-moving plasma in solar flares or capturing the faint structure of prominences against the blackness of space.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Daystar Serial Cable included with a new Quantum filter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the Daystar Serial Cable is typically sold separately. It is an optional accessory for users who wish to enable computer control for their Quantum series filter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Daystar_Filters_Quantum_Serial_Protocol_V1.2_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.daystarfilters.com\/downloads\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/daystar-filters-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eDaystar Filters Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Daystar Filters","offers":[{"title":"Default Title","offer_id":44967465091357,"sku":"DAY-SERQ15","price":32.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Daystar-Serial-Cable-SERQ15__15967.1597163309.1280.1280.jpg?v=1684342508"},{"product_id":"daystar-usb-serial-cable-2m","title":"Daystar USB Serial Cable - 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eOfficial Daystar Filters Accessory\u003c\/li\u003e\n\u003cli\u003eConnects Quantum Filters to a PC via USB\u003c\/li\u003e\n\u003cli\u003eEnables Full Functionality of Quantum Control Software\u003c\/li\u003e\n\u003cli\u003eUSB Type-A to DB9 Serial Interface\u003c\/li\u003e\n\u003cli\u003eProvides a Stable, Reliable Data Connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eDaystar USB Serial Cable - 2m\u003c\/h2\u003e\n\u003cp\u003eThe Daystar USB Serial Cable is the essential link for controlling your Daystar Quantum filter directly from a computer. With this USB-to-DB9 serial adapter, your computer communicates directly with Daystar's Quantum Control software, allowing for precise, on-screen adjustments to your filter's bandpass for maximum solar detail.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDirect PC Control for Daystar Quantum Filters\u003c\/h3\u003e\n\u003cp\u003eThis cable connects your Quantum filter's DB9 serial port directly to a modern computer's USB port. It is the required interface for using the Quantum Control software. This application gives you a graphical interface for precise digital tuning of the filter's etalon, which is critical for dialing in the exact bandpass for optimal contrast on solar features like prominences and surface granulation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the Daystar USB Serial Cable used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIt connects a \u003cstrong\u003eDaystar Quantum series solar filter\u003c\/strong\u003e to a computer's USB port. This allows you to control the filter's tuning electronically using the Daystar Quantum Control software instead of the standard hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this Daystar USB Serial Cable compatible with all Daystar filters?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this cable is specifically designed for the \u003cstrong\u003eDaystar Quantum series filters\u003c\/strong\u003e that feature a DB9 serial port for computer control. It is not intended for other Daystar products like the Quark series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need special drivers for the Daystar USB Serial Cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, like most USB-to-Serial adapters, this cable may require a driver to create a virtual COM port on your Windows computer. The necessary drivers are typically included with the Quantum Control software or can be found on the Daystar Filters website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI want to automate my solar imaging session with a Daystar Quantum filter. Is this cable all I need?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is the essential hardware link between your filter and your PC. To automate your session, you will also need the \u003cstrong\u003eDaystar Quantum Control software\u003c\/strong\u003e running on your computer. This setup allows you to precisely script or manually adjust the filter's bandpass to target different features on the Sun's chromosphere.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this Daystar cable to control my Quantum PE filter while imaging prominences with my 100mm f\/7 refractor?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. This is a perfect use case. By connecting your Quantum PE filter to a computer with this cable, you can make fine, repeatable tuning adjustments from your screen without touching the telescope. This minimizes vibrations and helps ensure you achieve the highest possible contrast on delicate solar prominences.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy computer doesn't have a DB9 serial port. How do I connect my Quantum filter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is the solution. It adapts the filter's DB9 serial connector to a standard USB Type-A port found on all modern laptops and desktop computers, bridging the gap between legacy and current hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Daystar_Filters_Quantum_Serial_Protocol_V1.2_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.daystarfilters.com\/downloads\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/daystar-filters-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eDaystar Filters Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Daystar Filters","offers":[{"title":"Default Title","offer_id":44967465189661,"sku":"DAY-USBH15","price":45.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Daystar-USB-Serial-Cable-USBH15__96407.1597163210.1280.1280.jpg?v=1684342510"},{"product_id":"lunt-pc-usb-pressure-tuner-controller","title":"Lunt PC-USB Pressure Tuner Controller","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAutomates pressure tuning for any Lunt PT solar telescope\u003c\/li\u003e\n\u003cli\u003eConnects and is controlled via a standard USB connection\u003c\/li\u003e\n\u003cli\u003eInternal microprocessor compensates for temperature and altitude changes\u003c\/li\u003e\n\u003cli\u003eRetrofits to any existing Lunt PT system without factory service\u003c\/li\u003e\n\u003cli\u003eInternal battery provides all-day power for field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eLunt PC-USB Pressure Tuner Controller\u003c\/h2\u003e\n\u003cp\u003eThe Lunt PC-USB Pressure Tuner Controller automates the most critical variable in solar imaging: etalon tuning. This microprocessor-controlled system replaces manual adjustments with repeatable, software-driven precision, allowing you to control your Lunt Pressure-Tuned (PT) telescope from a connected computer. It maintains the center wavelength setpoint regardless of changes in ambient temperature or altitude, providing stable, optimized views of the Sun's chromosphere throughout your observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRemote Operation: Computerized Control for Lunt Pressure Tuners\u003c\/h3\u003e\n\u003cp\u003eThe PC-USB connects to your Lunt solar telescope via a simple airline, giving you full control over the etalon's pressure from your computer. This eliminates the need to physically touch the telescope to make fine adjustments, a critical advantage for high-magnification imaging where even minor vibrations can ruin a capture. The simple two-button interface in the software allows for precise increases or decreases in pressure, with digital feedback confirming the exact setting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAutomated Precision: Set-and-Forget Altitude and Temperature Compensation\u003c\/h3\u003e\n\u003cp\u003eA key challenge in solar observation is etalon drift caused by environmental changes. The PC-USB solves this by creating a sealed, closed-loop system. It automatically compensates for pressure fluctuations caused by temperature shifts and maintains its setpoint even if you travel from sea level to a high-altitude observing site. This stability allows imagers to correlate pressure changes with doppler-shifted solar events, opening the door for more advanced solar study without constant manual retuning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePower \u0026amp; Installation: Field-Ready Power and Simple Retrofit\u003c\/h3\u003e\n\u003cp\u003eDesigned for both backyard and remote field use, the PC-USB runs on its internal rechargeable battery for extended imaging sessions. It can also be powered by an external adapter, which simultaneously charges the unit. Critically, the system can be retrofitted to any existing Lunt PT telescope by the user without requiring a return to the factory. An adapter fits over the standard PT knob, or future systems can be ordered with a quick-disconnect port for a cleaner setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Lunt PC-USB improve on manual pressure tuning?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Lunt PC-USB provides \u003cstrong\u003erepeatable, remote-controlled precision\u003c\/strong\u003e that is difficult to achieve manually. It eliminates vibrations from hands-on adjustments and automatically compensates for temperature and altitude changes, ensuring your telescope remains perfectly on-band for the duration of an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I install the PC-USB on my older Lunt solar telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The PC-USB is designed to be \u003cstrong\u003eretrofitted to any Lunt PT product\u003c\/strong\u003e. It includes an adapter that fits over the existing pressure tuner knob, and the system connects via a simple airline. You do not need to send your telescope to Lunt for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Lunt PC-USB handle altitude changes when I travel to a mountain observing site?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe PC-USB creates a sealed, closed-loop pressure system. Once you set your desired tuning pressure, the controller will maintain that internal pressure regardless of the external ambient air pressure. This means your center wavelength setpoint \u003cstrong\u003eremains constant at any altitude\u003c\/strong\u003e, eliminating the need to retune when you change locations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat power options does the Lunt PC-USB have for a full day of solar imaging?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe controller is equipped with an internal battery designed to last for a full day of observing. For longer sessions or permanent setups, it can also be powered by an \u003cstrong\u003eexternal DC power adapter\u003c\/strong\u003e, which will run the unit and charge the internal battery at the same time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan the Lunt PC-USB help track doppler shifts in solar prominences?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. Because the PC-USB provides precise digital feedback of the internal etalon pressure, advanced users can \u003cstrong\u003ecorrelate specific pressure changes to doppler-shifted events\u003c\/strong\u003e on the Sun. This allows you to precisely quantify the shift off the H-alpha line when observing fast-moving solar features.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need special software to use the Lunt PC-USB?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the PC-USB is operated via a software interface on a connected computer. The simple interface allows you to increase or decrease pressure and monitor the system's status remotely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePC-USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003ePC-USBHOSE25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/lunt-solar-system-warranty\" rel=\"noopener\" target=\"_blank\"\u003eLunt Solar Systems 5-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lunt Solar Systems","offers":[{"title":"Default Title","offer_id":44967541997853,"sku":"LSS-PCUSB","price":1393.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Lunt-PC-USB-1__03608.1598215860.1280.1280.jpg?v=1684343664"},{"product_id":"pegasus-eqdir-usb-stick-for-eqmod","title":"Pegasus EQDIR USB Stick for EQMOD","description":"\u003c!-- more --\u003e\u003cp\u003e\u003cspan\u003eOur new compact EQDir USB Stick Adapter for EQMOD allows direct connection of Skywatcher HEQ5 Syntrek\/PRO, NEQ6 Syntrek\/PRO, AZ EQ6-GT and EQ8 mounts to your PC or laptop. With this adapter you can remote control your Skywatcher mount directly via PC. No handbox controller is needed and the device is perfect for remote observatories.\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eMount Compatibility\u003c\/h3\u003e\u003cp\u003eChoose the appropriate model (DB9 or RJ45) for your mount model. You can use the same device in both of your mounts. Just attach the adapter RJ45 to DB9 and you are ready to go.\u003c\/p\u003e\u003ch4\u003eRJ45 Cable type\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSkywatcher HEQ5\u003c\/li\u003e\n\u003cli\u003eSkywatcher AZ-HEQ5\u003c\/li\u003e\n\u003cli\u003eSkywatcher AZ-EQ6\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ6-R\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ8\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ6-R Pro\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDB9 Cable type\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSkywatcher EQ6\u003c\/li\u003e\n\u003cli\u003eSkywatcher NEQ6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEQDIR heart is based on FTDI USB to Serial Chip\u003c\/h3\u003e\u003cp\u003eThe device uses an \u003cstrong\u003eoriginal\u003c\/strong\u003e FTDI chip. This chip is fully compatible and functional with Windows XP, 7 , 8, 10, OSX, Linux. There is no need to install external drivers as Windows Update will install the latest FTDI driver. Just plug it in your PC and play.\u003c\/p\u003e\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eSpecifications\u003c\/p\u003e\n\u003cdiv\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Connector\u003c\/td\u003e\n\u003ctd\u003eRJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Connector (USB Model only)\u003c\/td\u003e\n\u003ctd\u003eUSB type A (PC Stick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength \u003c\/td\u003e\n\u003ctd\u003e2 meters \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable to mount\u003c\/td\u003e\n\u003ctd\u003eUSB to RJ45 or USB to DB9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eIn the Box\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eEQDir USB Stick Adapter Device\u003c\/li\u003e\n\u003cli\u003eAdapter RJ45 to DB9 * If you ordered the DB9 version\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eDownloads\u003c\/p\u003e\n\u003cdiv\u003e\u003ca title=\"Quick Install Guide – EQDir USB Stick Adapter\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/t\/7\/assets\/description_image_Pegasus_Quick_Install_Guide_EQDir_USB_Stick_Adapter.pdf?v=1684344994\" target=\"_blank\" rel=\"noopener\"\u003eQuick Install Guide – EQDir USB Stick Adapter\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Pegasus Astro","offers":[{"title":"RJ45","offer_id":44967644168477,"sku":"PEG-EQDIR-USB-RJ","price":58.0,"currency_code":"CAD","in_stock":true},{"title":"DB9","offer_id":44967644201245,"sku":"PEG-EQDIR-USB-DB9","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Pegasus-EQDir-USB-Stick-EQMOD__93956.1646854636.1280.1280.jpg?v=1684345007"},{"product_id":"apm-illuminator-for-crosshair-eyepieces","title":"APM Illuminator for Crosshair Eyepieces","description":"\u003c!-- more --\u003e\u003ch2\u003e\u003cb\u003eIlluminator for reticle eyepieces\u003c\/b\u003e\u003c\/h2\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eModel\u003c\/b\u003eilluminated for Reticle Eyepieces","brand":"APM","offers":[{"title":"Default Title","offer_id":44967663010077,"sku":"APM-FIND-ILL","price":46.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/APM-Illuminator-for-Crosshair-Eyepieces-1__90162.1600124035.1280.1280.jpg?v=1684345412"},{"product_id":"sbig-starchaser-to-ao-x-ao-8t-adapter-cable","title":"SBIG StarChaser to AO-X\/AO-8T Adapter Cable","description":"\u003c!-- more --\u003e\u003cdiv\u003eConnects a StarChaser SC-3 to an AO-X.\u003c\/div\u003e","brand":"SBIG","offers":[{"title":"Default Title","offer_id":44967713374493,"sku":"DL-11044","price":127.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"sbig-tracking-cable","title":"SBIG Tracking Cable","description":"\u003c!-- more --\u003e\u003cdiv\u003eStandard 14 ft (4.2m) tracking cable used with SBIG cameras.\u003c\/div\u003e","brand":"SBIG","offers":[{"title":"Default Title","offer_id":44967713407261,"sku":"DL-50711","price":55.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/SBIG-Tracking-Cable-1__29643.1600282394.1280.1280.jpg?v=1684345593"},{"product_id":"sky-watcher-v5-synscan-handbox-controller","title":"Sky-Watcher V5 Synscan Handbox Controller","description":"\u003c!-- more --\u003e\u003cul\u003e\n\u003cli\u003e42,000 object data base\u003c\/li\u003e\n\u003cli\u003eBuilt-in USB-B 2.0 port for easy control via PC or firmware updates\u003c\/li\u003e\n\u003cli\u003eOnly compatible with Sky-Watcher SynScan mounts\u003c\/li\u003e\n\u003cli\u003eIncludes cables for both EQ and AZ Sky-Watcher mounts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sky-Watcher","offers":[{"title":"Default Title","offer_id":44967732216093,"sku":"SW-S30106","price":240.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Sky-Watcher-V5-Hand-Controller-S30106__37713.1646850173.1280.1280.jpg?v=1684345638"},{"product_id":"primalucelab-eqmod-usb-interface-for-eq6","title":"PrimaLuceLab EQMOD USB Interface for EQ6","description":"\u003c!-- more --\u003eThe EQMOD USB interface allows you to connect SkyWatcher mounts to the control computer (also the EAGLE) bypassing the mount hand pad. Using the EQMOD software (freely downloadable from eq-mod.sourceforge.net) you can control the mount via a graphical interface that offers more features than the standard SkyWatcher mount hand pad. And it's the perfect accessory to control the telescope remotely using the EAGLE!\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eEQMOD USB interface for SkyWatcher mounts connects to the hand pad port of the SkyWatcher computerized mounts and the USB port of computer, so it's the perfect accessory for the remote control with EAGLE. In this way the mount is directly controlled by the computer (and not from the hand pad) allowing you to access advanced features not available with the \u003c\/span\u003e\u003cspan\u003ehand pad\u003c\/span\u003e\u003cspan\u003e: automatic execution of mosaics, N stars \u003c\/span\u003e\u003cspan\u003ealignment\u003c\/span\u003e\u003cspan\u003e, etc \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"EQMOD USB interface for EQ6\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/t\/7\/assets\/description_image_PrimaLuceLab_EQMOD_USB_interface_for_EQ6_Description_1.jpg?v=1684345994\" title=\"EQMOD USB interface for EQ6\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe connection cable is 2 meter long and it's equipped with software on CD-ROM. Compatible with all Windows (32 and 64 bit) starting from Windows XP and with different planetarium software like Cartes du Ciel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":44967824720157,"sku":"PLL-PLLUSBEQ6","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PrimaLuceLab-EQMOD-USB-interface-for-EQ6__05744.1617396001.1280.1280.jpg?v=1684346010"},{"product_id":"primalucelab-eqmod-usb-interface-for-eq5-heq5-az-eq5-az-eq6-and-eq8","title":"PrimaLuceLab EQMOD USB Interface for EQ5, HEQ5, AZ-EQ5, AZ-EQ6 and EQ8","description":"\u003c!-- more --\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eEQMOD USB interface for SkyWatcher mounts connects to the hand pad port of the SkyWatcher computerized mounts and the USB port of computer, so it's the perfect accessory for the remote control with EAGLE. In this way the mount is directly controlled by the computer (and not from the hand pad) allowing you to access advanced features not available with the \u003c\/span\u003e\u003cspan\u003ehand pad\u003c\/span\u003e\u003cspan\u003e: automatic execution of mosaics, N stars \u003c\/span\u003e\u003cspan\u003ealignment\u003c\/span\u003e\u003cspan\u003e, etc \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"EQMOD USB interface for AZ-EQ5, AZ-EQ6 and EQ6-R\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/t\/7\/assets\/description_image_PrimaLuceLab_EQMOD_USB_interface_for_EQ6_Description_1.jpg?v=1684345994\" title=\"EQMOD USB interface for AZ-EQ5, AZ-EQ6 and EQ6-R\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe connection cable is 2 meter long and it's equipped with software on CD-ROM. Compatible with all Windows (32 and 64 bit) starting from Windows XP and with different planetarium software like Cartes du Ciel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":44967825768733,"sku":"PLL-PLLUSBAZEQ6","price":83.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PrimaLuceLab-EQMOD-USB-interface-for-EQ5-HEQ5-AZ-EQ5-AZ-EQ6-and-EQ8__87893.1617396001.1280.1280.jpg?v=1684346012"},{"product_id":"software-bisque-wisky-mks-5000-wi-fi-control","title":"Software Bisque WiSky MKS 5000 Wi-Fi Control","description":"\u003c!-- more --\u003e\u003cp\u003eMake your Paramount with MKS5000 control system wireless!\u003c\/p\u003e\u003cp\u003eWiSky(tm) allows TheSkyX Pro or TheSky for iOS to wirelessly control your Paramount ME II, Paramount MX, Paramount MYT, any Paramount ME upgraded with the MKS 5000, or any mount that employs Software Bisque’s MKS 5000 dual-axis motion control system. The WiSky is a PCB that plugs into the MKS 5000. Use TheSkyX Pro to configure the WiSky from the Bisque TCS Window.\u003c\/p\u003e\u003cp\u003eNote that the WiSky does not provide wireless access to the USB ports on the Versa-Plate’s Instrument Panel.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eAdditional information\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eAdditional information\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e10 × 9 × 3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv data-custom-tab\u003e\n\u003cp data-custom-tab-title\u003eDocumentation\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bisque.comhttps:\/\/www.bisque.com\/downloads\/wisky-installation-and-use-instructions\/\"\u003eWiSky Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.bisque.com\/downloads\/wisky-installation-instruction-video\/\"\u003eWiSky Installation Instructions (Video)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Software Bisque","offers":[{"title":"Default Title","offer_id":44967907459357,"sku":"SB10273","price":591.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Software-Bisque-WiSky-MKS-5000-Wi-Fi-Control-SB10273-1__39314.1620881779.1280.1280.jpg?v=1684346850"},{"product_id":"software-bisque-paramount-and-mks-5000-hand-paddle-joystick","title":"Software Bisque Paramount and MKS 5000 Hand Paddle\/Joystick","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eReplacement joystick for Paramount mounts\u003c\/li\u003e\n\u003cli\u003eNative compatibility with MKS 5000 and MKS 6000 controllers\u003c\/li\u003e\n\u003cli\u003eBackward compatible with MKS 4000 systems with firmware v2.8.6\u003c\/li\u003e\n\u003cli\u003eProvides tactile, responsive slewing and centering\u003c\/li\u003e\n\u003cli\u003eWeight: 3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eSoftware Bisque Paramount and MKS 5000 Hand Paddle\/Joystick\u003c\/h2\u003e\n\u003cp\u003eThe Software Bisque Paramount and MKS 5000 Hand Paddle\/Joystick provides direct, tactile slewing control for your Paramount mount in a robust 3 lb package measuring 4.5 × 12 × 4 inches. This controller serves as a dedicated replacement for mounts operating on MKS 5000 and MKS 6000 control systems, allowing for immediate, responsive adjustments without needing to interact with a computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eDirect Control for MKS 5000, 6000, and Select MKS 4000 Systems\u003c\/h3\u003e\n\u003cp\u003eThis hand paddle is the standard factory replacement for all Software Bisque mounts running the MKS 5000 or MKS 6000 telescope control system. It also offers backward compatibility for older Paramount ME mounts, but with a critical firmware requirement.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMKS 5000\/6000 Systems:\u003c\/strong\u003e The joystick is plug-and-play, providing immediate control over your mount's motion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMKS 4000 System Compatibility:\u003c\/strong\u003e To use this hand paddle with a Paramount ME controlled by an MKS 4000 system, the controller's firmware must be updated to version 2.8.6 or later. Functionality is not guaranteed on earlier firmware versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this MKS 5000 Hand Paddle work with my Paramount ME with an MKS 4000 controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, but only if your MKS 4000 controller is running \u003cstrong\u003efirmware version 2.8.6\u003c\/strong\u003e or newer. Before purchasing, you must verify your firmware version using TheSkyX software to ensure compatibility. The paddle will not function correctly with older MKS 4000 firmware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the correct replacement joystick for a Paramount MYT with an MKS 6000 system?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This hand paddle is the standard replacement controller for any Paramount mount, including the MYT, that uses the MKS 6000 control system. It is a direct, plug-and-play replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the MKS 5000 Hand Paddle require any special software to use?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the hand paddle is a direct hardware interface to the MKS 5000 or MKS 6000 control system. It does not require any additional drivers or software on your computer to function for basic slewing control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary function of the MKS 5000 Hand Paddle during an imaging session?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary function is to provide immediate, tactile control for tasks like centering a guide star in your autoguider's field of view, making fine adjustments to your image framing, or manually slewing the telescope to a new position without having to use the mouse and keyboard on your control computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this MKS 5000 joystick to perform the initial alignment on my Paramount ME?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the hand paddle is ideal for the manual slewing portions of an alignment routine, such as TPoint mapping. It allows you to precisely center alignment stars in the eyepiece or camera field of view before adding a new pointing sample.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow can I check the firmware version on my MKS 4000 controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou can check your MKS 4000's firmware version by connecting your Paramount mount to a computer running \u003cstrong\u003eTheSkyX Pro\u003c\/strong\u003e. The firmware version is typically displayed in the telescope control panel upon connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.5 × 12 × 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eParamount Hand Paddle\/Joystick\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Software_Bisque_Paramount_Series_6_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.bisque.com\/my-account\/downloads\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/software-bisque-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eSoftware Bisque 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Software Bisque","offers":[{"title":"Default Title","offer_id":44967907492125,"sku":"SB10228","price":748.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/Software-Bisque-Paramount-and-MKS-5000-Hand-Paddle-Joystick-SB10228-1__15610.1620881779.1280.1280.jpg?v=1684346852"},{"product_id":"pegasus-usb3-0-type-a-male-to-usb3-0-type-b-male-premium-cable-1m","title":"Pegasus USB3.0 Type-A male to USB3.0 Type-B Male Premium Cable- 1m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUSB 3.0 Type-A to Type-B Connection\u003c\/li\u003e\n\u003cli\u003e5Gb\/s Maximum Data Transfer Rate\u003c\/li\u003e\n\u003cli\u003e1 meter (3.3 ft) Cable Length\u003c\/li\u003e\n\u003cli\u003eGold-Plated Connectors with Metal Housings\u003c\/li\u003e\n\u003cli\u003eDouble Shielding with 24 AWG Power Conductors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUSB 3.0 Type-A to Type-B Cable - 1m Premium\u003c\/h2\u003e\n\u003cp\u003eThis premium 1-meter USB 3.0 Type-A to Type-B cable is engineered to deliver a consistent 5Gb\/s data rate for high-frame-rate astronomy cameras and sensitive devices. Its robust construction features double shielding, heavy-gauge 24 AWG power conductors, and gold-plated connectors to eliminate dropped frames and ensure stable power delivery. The 5.5 mm cable diameter and durable metal connector housings are built to withstand repeated use in the field, providing a secure physical and data connection session after session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e5Gb\/s Transfer Rate and Double Shielding\u003c\/h3\u003e\n\u003cp\u003eFor planetary imaging or any high-speed capture, maintaining signal integrity is critical. This cable's USB 3.0 specification supports data transfers up to 5Gb\/s, allowing you to run modern CMOS cameras at their maximum frame rate without creating a data bottleneck. To protect this high-speed signal from interference, it employs double shielding and dedicated 28 AWG data conductors, preventing dropped frames caused by radio frequency interference (RFI) from nearby electronics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eGold-Plated Connectors and 24 AWG Power Conductors\u003c\/h3\u003e\n\u003cp\u003eA reliable connection requires both electrical and physical stability. The connectors are gold-plated to resist corrosion and ensure low-resistance contact, housed in durable metal shells that won't deform over time. Internally, the cable uses heavier 24 AWG conductors for power, which reduces voltage drop over the 1-meter length and ensures your camera or filter wheel receives stable, sufficient power from the host computer's USB port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is a premium USB 3.0 cable necessary for an astronomy camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eStandard office-grade USB cables often lack the robust shielding and power conductors needed for astrophotography. This premium cable's \u003cstrong\u003edouble shielding\u003c\/strong\u003e and \u003cstrong\u003e24 AWG power lines\u003c\/strong\u003e prevent data errors and voltage drops, which can manifest as dropped frames, camera disconnects, or banding in your images, especially during long-exposure or high-frame-rate captures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 5Gb\/s cable work with my older USB 2.0 port?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this cable is backward compatible with USB 2.0 ports. However, the data transfer rate will be limited to the USB 2.0 maximum of 480 Mb\/s. To achieve the full 5Gb\/s speed, you must connect it between a USB 3.0 device and a USB 3.0 port on your computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the advantage of gold-plated connectors on this USB cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eGold is highly resistant to oxidation and corrosion. The \u003cstrong\u003egold-plated connectors\u003c\/strong\u003e on this cable ensure a reliable, low-resistance electrical connection over thousands of mating cycles. This is especially important for gear used outdoors where humidity and temperature changes can accelerate corrosion on standard connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 1-meter length of this cable a limitation?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 1-meter length is a deliberate design choice for minimizing data degradation and voltage drop, which become more significant with longer cables. It is ideal for connecting a camera directly to a mini PC or USB hub mounted on the telescope itself. For longer runs, an active USB 3.0 extension cable is recommended over a single long passive cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does this USB 3.0 cable improve planetary imaging with a ZWO ASI camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhen imaging Jupiter or Saturn with a high-speed camera like a ZWO ASI462MC or ASI585MC, you need to capture thousands of frames in a short window of good seeing. The \u003cstrong\u003e5Gb\/s bandwidth\u003c\/strong\u003e of this USB 3.0 cable ensures the camera can send the maximum number of frames per second to your capture software (like FireCapture or SharpCap) without dropping any, maximizing your chances of capturing sharp data.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the square-shaped USB 3.0 Type-B connector used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe USB 3.0 Type-B connector is commonly found on devices that require a stable, high-bandwidth connection, such as high-speed astronomy cameras, external hard drives, and docking stations. Its robust physical design provides a more secure connection than smaller USB connectors, preventing accidental disconnects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 1\u003c\/td\u003e\n\u003ctd\u003e1 x USB 3.0 Type-A male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 2\u003c\/td\u003e\n\u003ctd\u003e1 x USB 3.0 Type-B male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 up to 5Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShielding\u003c\/td\u003e\n\u003ctd\u003eDouble\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd\u003e28 AWG data \/ 24 AWG Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Finishing\u003c\/td\u003e\n\u003ctd\u003eGold-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003e5.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Colour\u003c\/td\u003e\n\u003ctd\u003eBlack \/ Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eUSB 3.0 Type-A to Type-B Cable - 1m\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo downloads are available for this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product is covered by a 2-year manufacturer's warranty against defects in materials and workmanship.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945011485,"sku":"PEG-USB3B-1PREM","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB3B-1PREM__14879.1638463226.1280.1280.jpg?v=1684347205"},{"product_id":"pegasus-usb3-0-type-a-male-to-usb3-0-type-b-male-premium-cable-2m","title":"Pegasus USB3.0 Type-A male to USB3.0 Type-B Male Premium Cable- 2m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUSB 3.0 Type-A to Type-B Cable\u003c\/li\u003e\n\u003cli\u003e5Gb\/s Maximum Data Transfer Rate\u003c\/li\u003e\n\u003cli\u003e2 m (6.56 ft) Length\u003c\/li\u003e\n\u003cli\u003eGold-Plated Connectors\u003c\/li\u003e\n\u003cli\u003eDurable Metal Connector Housings\u003c\/li\u003e\n\u003cli\u003e5.5 mm Cable Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePegasus Astro USB 3.0 Type-A to Type-B Cable - 2m\u003c\/h2\u003e\n\u003cp\u003eThis premium 2 m USB 3.0 Type-A to Type-B cable delivers a stable, high-speed connection essential for modern astrophotography cameras and devices. With a maximum data transfer rate of 5Gb\/s, gold-plated connectors, and rugged metal housings, it is engineered to prevent dropped frames and connection loss during critical imaging sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e5Gb\/s Data Transfer for Astrophotography\u003c\/h3\u003e\n\u003cp\u003eModern CMOS cameras require a high-bandwidth connection to transfer full-resolution frames without creating a data bottleneck. This cable's USB 3.0 interface supports a full 5Gb\/s data rate, ensuring your high-frame-rate planetary camera or full-frame deep-sky camera can operate at its maximum potential without software-side interruptions caused by data starvation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMetal Housing and Gold-Plated Connectors for 2m Reliability\u003c\/h3\u003e\n\u003cp\u003eA data cable is only as reliable as its physical connections. This 2 m cable features robust metal housings on both the Type-A and Type-B connectors, providing superior strain relief and durability compared to standard molded plastic plugs. The gold-plated contacts ensure a corrosion-free, low-resistance connection that maintains signal integrity session after session, even in damp observing conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerous Length:\u003c\/strong\u003e The 2 m (6.56 ft) length provides ample room to connect your camera or hub to a laptop or pier-mounted PC without putting strain on the USB ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e A 5.5 mm cable diameter and high-quality shielding protect against signal interference and physical damage from snags in the dark.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 2m USB 3.0 cable prevent dropped frames with my planetary camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, a high-quality USB 3.0 cable is a critical component for preventing dropped frames. This cable's 5Gb\/s bandwidth and shielded construction ensure that the full data stream from a high-speed camera, like a ZWO ASI174MM capturing solar system targets, reaches the acquisition computer without interruption.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this USB 3.0 cable compatible with USB 2.0 ports and devices?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this cable is backward compatible with USB 2.0. However, if you connect it to a USB 2.0 port or device, the data transfer speed will be limited to the USB 2.0 maximum of 480Mb\/s, not the 5Gb\/s rate of USB 3.0.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy are gold-plated connectors important for an astronomy cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eGold plating provides superior corrosion resistance, which is crucial for equipment used outdoors in varying humidity and dew conditions. It ensures a reliable, low-resistance electrical connection is maintained over the long term, preventing intermittent data loss that can be hard to diagnose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 2m cable to connect a Pegasus Astro Ultimate Powerbox V2 to my PC?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The USB 3.0 Type-B port is standard on many astronomy devices, including the Pegasus Astro Powerbox series. This 2 m cable is ideal for establishing a robust data connection from the Powerbox on your telescope back to your control computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the benefit of the metal connector housings?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe metal housings offer significantly better durability and strain relief than the plastic over-molded connectors found on most consumer-grade cables. This is especially important in astronomy, where cables are frequently plugged and unplugged in cold, dark conditions, increasing the risk of damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs 2 meters long enough for most telescope setups?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 2 m (6.56 ft) length is a versatile choice that works for many setups. It's typically sufficient for connecting a camera on a telescope to a nearby laptop or a USB hub mounted on the OTA itself. For connecting to a PC several feet away, you may need a longer active extension cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 1\u003c\/td\u003e\n\u003ctd\u003e1 x USB 3.0 Type-A male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 2\u003c\/td\u003e\n\u003ctd\u003e1 x USB 3.0 Type-B male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 up to 5Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Colour\u003c\/td\u003e\n\u003ctd\u003eBlack \/ Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003e5.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Finishing\u003c\/td\u003e\n\u003ctd\u003eGold-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eUSB 3.0 Type-A to Type-B Cable - 2m\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/davidastro.com\/pages\/pegasus-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePegasus Astro 2-Year Warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945044253,"sku":"PEG-USB3B-2PREM","price":28.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB3B-2PREM__51124.1638463773.1280.1280.jpg?v=1684347207"},{"product_id":"pegasus-usb3-1-gen2-type-c-male-to-usb3-0-type-b-male-cable-0-5m","title":"Pegasus USB3.1 Gen2 Type-C Male to USB3.0 Type-A Male Cable- 0.5m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUSB 3.1 Gen 2 data transfer rate up to 10 Gbps\u003c\/li\u003e\n\u003cli\u003eConnects USB Type-C devices to Type-A ports\u003c\/li\u003e\n\u003cli\u003eCompact 0.5 m (1.64 ft) length reduces cable clutter\u003c\/li\u003e\n\u003cli\u003eDurable 4.5 mm cable diameter\u003c\/li\u003e\n\u003cli\u003eSuperSpeed USB 10 Gbps certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUSB 3.1 Gen 2 Type-C to Type-A Cable (10 Gbps, 0.5 m)\u003c\/h2\u003e\n\u003cp\u003eThis USB 3.1 Gen 2 cable provides a full 10 Gbps connection between modern USB-C peripherals and legacy USB-A ports. The 0.5 m length is specifically designed for connecting nearby devices, while its robust 4.5 mm diameter ensures reliable data transfer at maximum speed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e10 Gbps Transfer Rate for High-Speed Peripherals\u003c\/h3\u003e\n\u003cp\u003eEngineered for the SuperSpeed USB 10 Gbps standard, this cable is built to handle high-bandwidth devices without creating a bottleneck. It allows you to take full advantage of the speed of external SSDs, 4K webcams, and high-speed data hubs, transferring large files in seconds, not minutes. The male Type-A to male Type-C connector configuration bridges the gap between new devices and the millions of host computers that use the traditional USB-A interface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCompact 0.5 m Length for a Clutter-Free Setup\u003c\/h3\u003e\n\u003cp\u003eAt a length of 0.5 meters, this cable is the ideal choice for a clean and organized workspace. It eliminates excess cable slack when connecting a portable hard drive to a laptop or a USB hub to a desktop computer right on your desk. The ca. 4.5 mm diameter gives the cable a durable feel, resistant to the wear and tear of daily use and travel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of this USB 3.1 Gen 2 cable's 10 Gbps speed?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003e10 Gbps data transfer rate\u003c\/strong\u003e allows you to connect high-performance peripherals, like external NVMe SSDs, and operate them at their maximum speed. This is twice as fast as the 5 Gbps rate of standard USB 3.0 (USB 3.1 Gen 1) cables, significantly reducing file transfer times for large video projects, photo libraries, or system backups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 10 Gbps cable to connect my USB-C smartphone to a laptop with a USB-A port?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this cable is perfect for connecting a USB-C smartphone or tablet to a computer with a traditional USB-A port for data syncing and charging. While the phone may not utilize the full 10 Gbps bandwidth, the cable ensures a stable and reliable connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 0.5 m length of this cable suitable for connecting an external SSD to my desktop PC?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.5 m length\u003c\/strong\u003e is ideal if your desktop PC's USB-A ports are easily accessible on the front panel or if you plan to place the external SSD on top of the computer case. For connecting to rear ports that are further away, you may want to consider a longer cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this cable support video output (DisplayPort Alt Mode)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. Video signal transmission like DisplayPort Alternate Mode is a feature exclusive to USB-C to USB-C connections. This cable is designed for \u003cstrong\u003edata transfer and power only\u003c\/strong\u003e and does not support video output from its Type-A connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat's the difference between USB 3.1 Gen 2 and USB 3.2 Gen 2?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFunctionally, for a single-lane cable like this, there is no difference in speed. USB 3.1 Gen 2 and USB 3.2 Gen 2 both refer to the same \u003cstrong\u003e10 Gbps speed\u003c\/strong\u003e. The USB-IF updated the naming conventions, but the underlying technology for this speed grade remains the same.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the Type-C connector on this cable reversible?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the USB Type-C male connector is fully reversible, meaning you can plug it into your device in either orientation without worrying about which side is up. The Type-A connector must be inserted in its standard orientation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eSuperSpeed USB 10 Gbps Type-A male to USB Type-C male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003eup to SuperSpeed USB 10 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003eca. 4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003eca. 0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eUSB 3.1 Gen 2 (10 Gbps) cable Type-C to Type-A 0.5 m\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 1-Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945077021,"sku":"PEG-USB3C-A-05M","price":15.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB3C-05M__09423.1638480537.1280.1280.jpg?v=1684347208"},{"product_id":"pegasus-pack-of-2x-usb3-0-type-a-male-to-usb3-0-type-b-male-cables-0-5m","title":"Pegasus Pack of 2x USB3.0 Type-A male to USB3.0 Type-B Male Cables- 0.5m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePack of 2 USB 3.0 Type-A to Type-B Cables\u003c\/li\u003e\n\u003cli\u003eData Transfer Rate: Up to 5 Gbit\/s\u003c\/li\u003e\n\u003cli\u003eLength: 50 cm (0.5 m)\u003c\/li\u003e\n\u003cli\u003eConductor Gauge: 28 AWG Data \/ 24 AWG Power\u003c\/li\u003e\n\u003cli\u003eIdeal for close-range device connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePack of 2 x USB 3.0 Type-A to Type-B Cables (0.5 m)\u003c\/h2\u003e\n\u003cp\u003eThis pack of two USB 3.0 Type-A to Type-B cables provides a high-speed, reliable connection for your astronomy cameras, external hard drives, and other peripherals. With a SuperSpeed data transfer rate of up to 5 Gbit\/s, these cables ensure rapid image downloads and smooth device operation. The robust construction features a 24 AWG power conductor to deliver stable voltage to your devices, and the short 50 cm length is perfect for minimizing cable drag and clutter on your telescope rig.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eHigh-Speed 5 Gbit\/s USB 3.0 Connection\u003c\/h3\u003e\n\u003cp\u003eAchieve the full data throughput your modern astronomy camera is capable of. These cables adhere to the USB 3.0 specification, delivering a maximum data transfer rate of 5 Gbit\/s—ten times faster than USB 2.0. This speed is critical for planetary imaging, where you're capturing thousands of frames in a short time, and for downloading large deep-sky images without a long wait.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e50 cm Length and 24 AWG Power for Reliable Connection\u003c\/h3\u003e\n\u003cp\u003eDesigned for on-telescope use, the 50 cm length minimizes the risk of snags and keeps your setup tidy. Shorter cable runs reduce the chance of signal degradation, ensuring a stable connection throughout an imaging session. The cable is built with a heavier 24 AWG gauge for the power lines and 28 AWG for data, providing consistent and reliable power to your camera or accessory, which is crucial for preventing dropped frames and connection issues.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are these 0.5m USB 3.0 Type-B cables typically used for in astronomy?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTheir most common use is connecting a primary astronomy camera (which often has a USB 3.0 Type-B port) to a USB hub or mini-PC mounted on the telescope. The short \u003cstrong\u003e50 cm length\u003c\/strong\u003e is ideal for this, as it prevents long, dangling cables that can cause drag, snags, or tracking errors as the mount moves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is the 24 AWG power conductor important for these USB 3.0 cables?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA lower American Wire Gauge (AWG) number means a thicker wire. The \u003cstrong\u003e24 AWG power conductor\u003c\/strong\u003e in this cable is more substantial than in many standard USB cables, allowing it to deliver more stable voltage and current to your connected device. This is critical for power-sensitive equipment like cooled CMOS cameras, preventing performance issues caused by voltage drop.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill these USB 3.0 cables work with my USB 2.0 camera or port?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, USB 3.0 is backward-compatible with USB 2.0. However, if you connect this cable to a USB 2.0 device or port, the data transfer speed will be limited to the USB 2.0 maximum of 480 Mbit\/s. To get the full \u003cstrong\u003e5 Gbit\/s\u003c\/strong\u003e speed, both the device and the port must be USB 3.0 compliant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect my ZWO or QHY camera to a Pegasus Astro Powerbox using these cables?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou would connect the USB 3.0 Type-B (square-style) male end of the cable to the corresponding port on your astronomy camera. The other end, the USB 3.0 Type-A male connector, would plug into one of the powered USB 3.0 ports on your Pegasus Astro Powerbox or another powered USB hub on your rig.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs a 50 cm cable long enough for use with an 8\" SCT on an EQ6-R Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA \u003cstrong\u003e50 cm\u003c\/strong\u003e cable is generally perfect for this scenario if you have a USB hub or computer mounted on the optical tube or dovetail bar. It allows for a clean connection from the camera to the hub without excess cable. If your control computer is on the ground or a tripod tray, you will need a much longer \"active\" USB 3.0 extension cable running from the hub down to the PC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy does this come in a pack of two cables?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eReceiving two cables ensures you always have a spare on hand during an imaging night. A faulty cable can end an observing session unexpectedly, so having a tested backup is a critical part of any astrophotographer's field kit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 Type-A Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 Type-B Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003eUp to 5 Gbit\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003e5.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd\u003e28 AWG (Data) \/ 24 AWG (Power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50 cm \/ 0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e0.5m USB 3.0 Type-A to Type-B Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/pegasus-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePegasus Astro 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945109789,"sku":"PEG-USB3B-05M","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB3B-05M__69199.1640974529.1280.1280.jpg?v=1684347210"},{"product_id":"pegasus-pack-of-2x-usb2-0-type-a-male-to-usb2-0-type-2-male-angled-cables-0-5m","title":"Pegasus Pack of 2x USB2.0 Type-A male to USB2.0 Type-2 Male Angled Cables- 0.5m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePack of two USB 2.0 cables\u003c\/li\u003e\n\u003cli\u003eUSB Type-A Male to 90° Angled USB Type-B Male\u003c\/li\u003e\n\u003cli\u003e50 cm (0.5 m) length for minimal cable drag\u003c\/li\u003e\n\u003cli\u003eUp to 480Mb\/s data transfer rate\u003c\/li\u003e\n\u003cli\u003eIdeal for cameras, focusers, and other peripherals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePack of 2 x USB 2.0 Type-A to Angled Type-B Cables (0.5m)\u003c\/h2\u003e\n\u003cp\u003eThis pack of two USB 2.0 cables provides a reliable 480Mb\/s data connection in a compact 50 cm length, featuring a 90° angled Type-B male connector ideal for tight spaces and clean cable management. The 4.5 mm cable diameter ensures durability without adding unnecessary bulk to your astrophotography setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eClean Cable Routing: The 90° Type-B Connector Advantage\u003c\/h3\u003e\n\u003cp\u003eThe defining feature of these cables is the 90° right-angle bend on the USB Type-B connector. This design prevents sharp bends and minimizes strain on the ports of your valuable equipment, such as ZWO or QHY cameras. It allows the cable to run flush against the device body, which is critical for preventing snags and maintaining clearance on fork-mounted telescopes or in compact observatory setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eOptimized for Your Rig: 50 cm Length and 480Mb\/s Transfer Rate\u003c\/h3\u003e\n\u003cp\u003eAt a length of 50 cm, these cables are perfect for connecting peripherals to a nearby USB hub mounted on your telescope's dovetail or optical tube. This shorter length eliminates excess cable that can cause drag, snags, or tracking errors. The USB 2.0 standard delivers a stable 480Mb\/s transfer rate, which is more than sufficient for the data needs of most guide cameras, filter wheels, and electronic focusers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main benefit of the 90° angled connector on this USB cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 90° angled Type-B connector reduces physical strain on your camera or accessory's USB port. It allows for a much tighter, cleaner cable routing profile, which helps prevent snags and cable drag, especially on German Equatorial Mounts where cables can catch during a meridian flip.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 50 cm length of this USB cable long enough for most setups?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe 50 cm length is intentionally short. It is designed for connecting devices on your telescope—like a guide camera or focuser—to a USB hub that is also mounted on the telescope assembly. This minimizes cable loops and reduces the risk of tracking errors caused by cable drag. It is not intended to run directly from the telescope to your computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this angled USB cable work with a ZWO ASI120MM Mini guide camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The ZWO ASI120MM Mini uses a USB-C connector. This cable has a USB Type-B connector, which is found on larger cooled astronomy cameras, many focus controllers, and some filter wheels. Always check your device's port type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 480Mb\/s USB 2.0 cable for a high-resolution planetary camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile this cable will work, most modern high-frame-rate planetary cameras require a USB 3.0 connection (5Gb\/s or higher) to achieve their maximum advertised frame rates. Using this USB 2.0 cable will limit the camera to the 480Mb\/s transfer speed, significantly reducing its maximum FPS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow would I use this angled USB cable with my Celestron 8\" EdgeHD setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOn a Celestron 8\" EdgeHD, you would typically mount a USB hub (like a Pegasus Astro Pocket Powerbox) on the CGE or Losmandy dovetail bar. This 50 cm angled cable is the perfect length to connect a cooled deep-sky camera or an electronic focuser on the rear cell to that hub, keeping the wiring tidy and clear of the mount's fork arms or base.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy does this come in a pack of two cables?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is a pack of two for convenience and redundancy. Most imaging rigs use multiple devices with USB-B ports (e.g., main camera and filter wheel), and having a matched-length cable for both creates a cleaner setup. It also provides an immediate spare in case a cable is damaged in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type-A Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type-B Male, 90° Angled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003eUp to 480Mb\/s (USB 2.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e50 cm (0.5 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 Cables per Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eUSB 2.0 Type-A to 90° Angled Type-B Cable (0.5m)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/pegasus-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePegasus Astro 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945208093,"sku":"PEG-USB2B-05M","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB2B-05M__93104.1638481136.1280.1280.jpg?v=1684347212"},{"product_id":"pegasus-pack-of-2x-usb2-0-type-a-male-to-usb2-0-type-b-male-angled-cables-1m","title":"Pegasus Pack of 2x USB2.0 Type-A male to USB2.0 Type-B Male Angled Cables- 1m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePack of 2 USB 2.0 Cables\u003c\/li\u003e\n\u003cli\u003eUSB-A Male to 90° Angled USB-B Male\u003c\/li\u003e\n\u003cli\u003e1 meter (3.3 ft) Length\u003c\/li\u003e\n\u003cli\u003eUp to 480 Mb\/s Data Transfer Rate\u003c\/li\u003e\n\u003cli\u003e4.5 mm Cable Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePack of 2 x USB 2.0 Type-A to Angled Type-B Cables - 1m\u003c\/h2\u003e\n\u003cp\u003eThis pack of two 1-meter USB 2.0 cables provides reliable data transfer at up to 480 Mb\/s, featuring a standard Type-A male connector on one end and a 90° angled Type-B male connector on the other. With a durable 4.5 mm cable diameter, these cables are built to connect your essential astronomy accessories where space is at a premium.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e90° Angled USB-B for Strain-Free Connections\u003c\/h3\u003e\n\u003cp\u003eThe key feature of these cables is the 90° right-angle bend on the USB Type-B connector. This design is ideal for connecting ZWO cameras, filter wheels, or focus motors to your PC or USB hub, especially when devices are mounted in tight configurations on a telescope rig. The angled connection prevents sharp bends that can damage the cable or port over time, ensuring a secure and lasting link while keeping your setup tidy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUSB 2.0 Speed: Reliable 480 Mb\/s Data for Astro Devices\u003c\/h3\u003e\n\u003cp\u003eEngineered for the USB 2.0 standard, these cables deliver a data rate of up to 480 Mb\/s. This is more than sufficient for controlling most astronomy cameras, autoguiders, focusers, and other peripherals without data loss or connection drops. The 1-meter length offers enough flexibility to route the cable cleanly without creating excess slack that can snag in the dark.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the primary use for this angled USB 2.0 cable pack?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis 2-pack of angled USB 2.0 cables is designed to connect peripherals like astronomy cameras, filter wheels, or focus motors to a computer or USB hub. The 90° angled Type-B connector is particularly useful for reducing cable strain and saving space in tight equipment setups on a telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this 480 Mb\/s USB 2.0 cable work with my ZWO planetary camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this cable is perfectly suited for many ZWO cameras and other astronomy devices that use a USB 2.0 Type-B port for control and data transfer. The 480 Mb\/s speed is standard for USB 2.0 and provides a reliable connection for planetary imaging and autoguiding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the 90° angled connector on this USB cable help my astrophotography rig?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOn a crowded telescope assembly, a standard straight cable can be forced into a sharp bend, stressing the port and the cable itself. The 90° angled connector on this USB cable allows the cable to run flush with the device, preventing snags, minimizing clearance issues, and protecting your equipment's ports from damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 1-meter length of this USB cable long enough for a typical telescope setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 1-meter (3.3 ft) length is ideal for connecting a camera or accessory directly to a USB hub mounted on the telescope itself. This helps centralize cable management and reduces the risk of cables dragging or snagging as the mount tracks across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this angled USB 2.0 cable to connect my Sky-Watcher EQ6-R Pro mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, if you are using the USB Type-B port on the Sky-Watcher EQ6-R Pro for direct PC control, this cable is compatible. The angled connector can help create a cleaner cable path from the mount's port, especially when other cables are present.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this cable pack support USB 3.0 speeds?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this is a USB 2.0 cable with a maximum data transfer rate of 480 Mb\/s. While it is backward compatible and will work in a USB 3.0 port, it will only operate at USB 2.0 speeds. It is not intended for high-speed deep-sky cameras that require a USB 3.0 connection for full-resolution video.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type-A Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type-B Male, 90° Angled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Data Rate\u003c\/td\u003e\n\u003ctd\u003e480 Mb\/s (USB 2.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 Cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e1m USB 2.0 A-Male to 90° B-Male Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/pegasus-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eStandard 2-Year Manufacturer Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945240861,"sku":"PEG-USB2B-1M","price":16.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB2B-1M__58651.1638481220.1280.1280.jpg?v=1684347213"},{"product_id":"pegasus-pack-of-2x-usb2-0-type-a-male-to-usb-mini-b-5pin-male-angled-cables-0-5m","title":"Pegasus Pack of 2x USB2.0 Type-A male to USB mini-B 5pin Male Angled Cables- 0.5m","description":"\u003c!-- more --\u003e\u003cul\u003e\n\u003cli\u003eConnection: USB 2.0–A male                        \u003c\/li\u003e\n\u003cli\u003eUSB mini-B 5pin male angled\u003c\/li\u003e\n\u003cli\u003eAWG 28 data line \/ AWG 24 power line\u003c\/li\u003e\n\u003cli\u003eNickel-plated\u003c\/li\u003e\n\u003cli\u003eCable length: ca. 0.5 m   \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945273629,"sku":"PEG-USB2MINI-05M","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB2MINI-05M__27964.1638481308.1280.1280.jpg?v=1684347215"},{"product_id":"pegasus-pack-of-2x-usb2-0-type-a-male-to-usb-mini-b-5pin-male-angled-cables-1m","title":"Pegasus Pack of 2x USB2.0 Type-A male to USB mini-B 5pin Male Angled Cables- 1m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003ePack of 2 USB 2.0 Cables\u003c\/li\u003e\n\u003cli\u003eUSB-A Male to Angled USB Mini-B 5-pin Male\u003c\/li\u003e\n\u003cli\u003e1.0 meter (3.3 ft) Cable Length\u003c\/li\u003e\n\u003cli\u003eAngled Connector for Strain Relief\u003c\/li\u003e\n\u003cli\u003eIdeal for Astro-Cameras and Hubs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePack of 2 x USB 2.0-A to Angled Mini-B Cables - 1m\u003c\/h2\u003e\n\u003cp\u003eThis pack includes two USB 2.0 cables, each measuring 1.0 meter in length, designed to connect devices with a USB Mini-B 5-pin port to a standard USB-A host. The key feature is the angled Mini-B connector, which provides a secure, low-profile connection perfect for managing cables on a telescope rig or in any tight space.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eTidy and Secure Connections with a 1m Angled Cable\u003c\/h3\u003e\n\u003cp\u003eThe 90-degree angle on the Mini-B connector is engineered to solve a common problem: cable strain and clutter. By routing the cable flush against the device, it minimizes the risk of snags and accidental disconnection during an imaging session. At 1.0 meter, the length is ideal for connecting a guide camera, filter wheel, or focuser to a nearby USB hub on your telescope OTA without excess slack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Strain:\u003c\/strong\u003e The angled design prevents sharp bends at the connection point, extending the life of both the cable and your device's port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Fit:\u003c\/strong\u003e Perfect for equipment mounted in tight enclosures or for creating clean, organized cable runs on your astrophotography setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Data Transfer:\u003c\/strong\u003e Provides a stable USB 2.0 connection for controlling astronomy accessories and transferring data from planetary or guide cameras.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat devices use this angled Mini-B USB cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is compatible with many astronomy devices that use a USB Mini-B 5-pin port for data or power. This includes older ZWO planetary cameras, various guide cameras, electronic filter wheels, and some focus controllers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I choose an angled USB cable for my telescope?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAn angled connector helps prevent cables from snagging on the mount as the telescope slews. It creates a much cleaner, more compact cable routing path, which reduces the chance of a cable pulling out or getting caught in the dark, potentially ruining a long exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this 1m USB cable long enough for my setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 1.0 meter length is generally ideal for connecting a device on your optical tube back to a USB hub or power box also mounted on the tube or dovetail bar. It is typically not long enough to run from the telescope directly back to a laptop on the ground, for which you would need a longer cable or a USB extension.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this USB 2.0 cable be fast enough for my planetary camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, for many cameras that use a Mini-B port, the USB 2.0 standard provides sufficient bandwidth for planetary imaging frame rates. However, it is not as fast as USB 3.0, so it's best suited for devices that were originally designed for the USB 2.0 specification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this pack include two separate 1m USB cables?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is a pack of two. You will receive two individual 1.0 meter USB 2.0-A to angled Mini-B cables, allowing you to connect two separate devices or keep one as a spare.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the difference between Mini-B and Micro-B USB?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eUSB Mini-B has a thicker, trapezoidal connector shape, common on older cameras and digital devices. USB Micro-B is a much thinner, smaller connector found on most modern smartphones and accessories. This cable is for Mini-B ports and will not fit a Micro-B port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 1\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0–A male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 2\u003c\/td\u003e\n\u003ctd\u003eUSB mini-B 5pin male angled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003eca. 1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e1m USB 2.0-A to Angled Mini-B Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard 1-Year Manufacturer Warranty\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945339165,"sku":"PEG-USB2MINI-1M","price":16.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB2MINI-1M__21740.1638481381.1280.1280.jpg?v=1684347217"},{"product_id":"pegasus-usb3-2-gen1-type-a-male-to-type-b-male-cable-with-metal-jacket-0-5m","title":"Pegasus USB3.2 Gen1 Type-A male to Type-B Male Cable with Metal Jacket- 0.5m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUSB 3.2 Gen 1 Type-A to Type-B Connectors\u003c\/li\u003e\n\u003cli\u003eDurable Metal Jacket Construction\u003c\/li\u003e\n\u003cli\u003e0.5 meter (approx. 1.6 ft) Length\u003c\/li\u003e\n\u003cli\u003e5.5 mm Cable Diameter\u003c\/li\u003e\n\u003cli\u003eIdeal for Astro-Cameras and Hubs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUSB 3.0 Type-A to Type-B Metal Cable - 0.5m\u003c\/h2\u003e\n\u003cp\u003eThis USB 3.0 Type-A to Type-B Metal 0.5m cable provides a robust, short-run connection essential for modern astrophotography rigs. Its 0.5 m length is specifically chosen to eliminate cable drag and snags between your camera and a nearby USB hub or computer, while the durable metal jacket protects the 5.5 mm diameter cable from physical damage and electrical interference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe 0.5m Solution for Snag-Free Cable Management\u003c\/h3\u003e\n\u003cp\u003eLong cables are a primary source of tracking errors, disconnects, and frustration. This cable's short 0.5 m length is its most critical feature, allowing you to create a clean, tightly-managed connection between a ZWO or QHY camera and a power box or hub mounted directly on the optical tube assembly. This minimizes the risk of the cable catching on the mount during a meridian flip or long slew.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMetal Jacket Shielding for Reliable USB 3.2 Gen 1 Data\u003c\/h3\u003e\n\u003cp\u003eAn astronomy setup is an electrically noisy environment, with dew heaters, focus motors, and mount electronics all creating potential interference. This cable features a metal outer jacket over its 5.5 mm diameter core, providing an extra layer of shielding to ensure your USB 3.2 Gen 1 data stream remains stable and free of dropped frames. It's the ideal choice for connecting high-speed planetary cameras or filter wheels where data integrity is paramount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy use a 0.5m USB 3.0 Type-B cable instead of a longer one?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA \u003cstrong\u003e0.5 m cable\u003c\/strong\u003e is ideal for connecting a device, like an astronomy camera, to a USB hub or power box mounted on the same telescope. This short length drastically reduces the chance of the cable snagging on the mount, tripod, or other accessories during operation, which can ruin an exposure or cause equipment damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat devices use a USB 3.0 Type-B connection?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe square-shaped \u003cstrong\u003eUSB 3.0 Type-B\u003c\/strong\u003e port is common on many dedicated astronomy cameras (from brands like ZWO and QHY), powered USB hubs, and some focus controllers. This 0.5m cable is designed specifically to link these devices to a standard Type-A port on a computer or hub.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the metal jacket on this 0.5m USB cable improve anything?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The metal jacket provides two key benefits. First, it offers superior physical protection against crushing or kinking compared to standard PVC cables. Second, it adds an extra layer of electromagnetic shielding, which helps protect the high-speed data signal from interference generated by other electronics on your telescope rig.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this 0.5m cable compatible with USB 2.0 ports?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile the USB 3.0 Type-B plug is physically different and will not fit into a USB 2.0 Type-B port, the Type-A end is backward compatible. If you plug the Type-A end into a USB 2.0 port on your computer, the connection will work but will be limited to USB 2.0 speeds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the data transfer speed of this 0.5m USB 3.0 cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable uses the \u003cstrong\u003eUSB 3.2 Gen 1\u003c\/strong\u003e standard, which is the modern name for USB 3.0. It supports a maximum theoretical data transfer speed of 5 Gigabits per second (Gbps), making it suitable for high-frame-rate planetary imaging and large-format deep-sky cameras.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this 0.5m USB 3.0 cable to power my astronomy camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable will provide standard USB bus power. For uncooled cameras, this is often sufficient. However, for cooled cameras that require a separate 12V DC input for their TEC cooler, this cable will only handle the data connection; you will still need a dedicated power supply for the cooling function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e1 x USB 3.2 Gen 1 Type-A plug \/ 1 x USB 3.2 Gen 1 Type-B plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003eapprox. 0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003eapprox. 5.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket Material\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eUSB 3.0 Type-A to Type-B Cable - 0.5m\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo downloads are available for this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product is covered by a 1-year limited warranty.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945371933,"sku":"PEG-USB3B-METAL-05M","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB3B-METAL-05M__23142.1638481542.1280.1280.jpg?v=1684347219"},{"product_id":"pegasus-usb3-2-gen1-type-a-male-to-type-b-male-cable-with-metal-jacket-1m","title":"Pegasus USB3.2 Gen1 Type-A male to Type-B Male Cable with Metal Jacket- 1m","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eUSB 3.2 Gen 1 Type-A to Type-B Connection\u003c\/li\u003e\n\u003cli\u003e1.0 meter (approx. 3.3 ft) Length\u003c\/li\u003e\n\u003cli\u003eDurable Metal Jacket Construction\u003c\/li\u003e\n\u003cli\u003e5.5mm Cable Diameter\u003c\/li\u003e\n\u003cli\u003eSilver Color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUSB 3.0 Type-A to Type-B Metal Cable - 1.0m\u003c\/h2\u003e\n\u003cp\u003eThis 1.0-meter USB 3.2 Gen 1 cable provides a robust, high-speed link between your astronomy camera, focuser, or filter wheel and a host computer. The durable metal jacket protects the internal wiring from physical stress and dew, while the 5.5mm diameter ensures a secure connection via its Type-A and Type-B plugs, critical for maintaining data integrity during an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMetal-Jacketed USB 3.2 Gen 1 for Reliable Device Links\u003c\/h3\u003e\n\u003cp\u003eThe core function of this cable is to deliver a stable data connection between modern astronomy peripherals and your control PC or hub. The USB 3.2 Gen 1 Type-B connector is the standard for many dedicated astronomy cameras, and this cable ensures your device can communicate at its full native speed without dropouts caused by inferior shielding or construction.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e The silver metal jacket provides superior protection against the accidental nicks, snags, and crushing that can occur in the dark, extending the cable's lifespan far beyond standard plastic-coated cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Connection:\u003c\/strong\u003e At a diameter of approximately 5.5 mm, the cable and connectors provide a firm, positive fit, reducing the risk of intermittent data loss from loose connections as your mount tracks across the sky.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Integrity:\u003c\/strong\u003e Proper shielding and construction are essential for preventing dropped frames during high-speed planetary imaging or guiding corrections, and this cable is built to maintain that stable link.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e1.0m Length for Snag-Free Cable Management\u003c\/h3\u003e\n\u003cp\u003eA primary cause of tracking errors and lost subs is cable drag or snagging on the mount. At approximately 1.0 meter, this cable is the ideal length for connecting a device on your optical tube assembly (OTA) to a USB hub or powerbox also mounted on the OTA. This configuration keeps the cable contained within the moving part of your rig, preventing it from hanging down and catching on the tripod or mount base.\u003c\/p\u003e\n\u003cp\u003eWhile a 1.0m cable is perfect for on-telescope connections, it is a limitation for direct connections to a laptop or PC located several feet away. For those direct-to-computer setups, a longer cable or an active USB extension would be required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is this 1.0m USB 3.2 Gen 1 cable typically used for in astronomy?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis cable is primarily used to connect a dedicated astronomy camera, electronic filter wheel, or motorized focuser that has a USB Type-B port to a computer or a USB hub. The 1.0m length is ideal for connecting devices on the telescope back to a hub that is also mounted on the telescope, minimizing cable drag.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this USB 3.2 Gen 1 cable work with my older USB 2.0 camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the USB 3.2 Gen 1 standard is backward-compatible with USB 2.0. If your camera has a USB Type-B port, this cable will connect and function correctly, but the data transfer speed will be limited to the camera's native USB 2.0 rate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I choose this 1.0m metal-jacketed cable over a standard plastic one?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe metal jacket offers significantly better durability against physical damage like crushing, abrasion, or sharp edges on your gear. It provides a more robust and reliable connection for field use where equipment is frequently set up and taken down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 1.0m length of this USB cable long enough to connect my guide camera to my laptop?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA 1.0-meter cable is generally too short to run directly from a camera on a telescope to a laptop on the ground. It is designed for connecting the camera to a nearby device, such as a USB hub (like a Pegasus Astro Pocket Powerbox) or a mini-PC mounted on the telescope itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow can this 1.0m cable help with cable management on my Celestron 8\" SCT setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eOn an SCT, you can mount a USB hub to the CGE or Losmandy dovetail bar. This 1.0m cable is the perfect length to run from your primary imaging camera at the rear of the telescope to the hub without leaving excessive, loose cable that could snag on the fork arms or base during slewing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the 5.5 mm diameter of this USB cable make it too stiff for cold weather?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile all cables become stiffer in the cold, the metal jacket on this cable is designed to remain more flexible than many thick, plastic-insulated cables. The approximate 5.5 mm diameter strikes a balance between durability and flexibility, reducing the chances of it exerting unwanted force on your mount's tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e1 x USB 3.2 Gen 1 Type-A plug \/ 1 x USB 3.2 Gen 1 Type-B plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Diameter\u003c\/td\u003e\n\u003ctd\u003eapprox. 5.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003esilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003eapprox. 1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eUSB 3.0 Type-A to Type-B Metal Cable - 1.0m\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/pegasus-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePegasus Astro 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":44967945404701,"sku":"PEG-USB3B-METAL-1M","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/PEG-USB3B-METAL-05M__23142.1638481542.1280.1280__95965.1647475458.1280.1280.jpg?v=1684347203"},{"product_id":"ioptron-rs232-rj9-serial-cable","title":"iOptron RS232-RJ9 Serial Cable","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects PC RS232 Serial Port to an iOptron Mount\u003c\/li\u003e\n\u003cli\u003eEnables Direct Mount Control via ASCOM\u003c\/li\u003e\n\u003cli\u003eRequired for Mount and Hand Controller Firmware Updates\u003c\/li\u003e\n\u003cli\u003eStandard RJ9 and RS232 (DB9) Connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron RS232-RJ9 Serial Cable\u003c\/h2\u003e\n\u003cp\u003eThis is the official iOptron RS232-RJ9 serial cable, providing the essential physical link between a computer and your iOptron mount. It allows for direct communication, enabling firmware updates for the GoToNova hand controller and mount control boards. This connection is also the foundation for PC-based telescope control, allowing you to interface your mount with planetarium software and ASCOM drivers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe Essential Link for PC Control and Firmware Updates\u003c\/h3\u003e\n\u003cp\u003eTo keep your iOptron mount operating with the latest features and tracking improvements, firmware updates are critical. This cable connects your mount's RJ9 serial port directly to a computer's legacy RS232 (DB9) serial port, allowing the iOptron update utility to communicate with the hardware.\u003c\/p\u003e\n\u003cp\u003eBeyond maintenance, this cable unlocks the full potential of computerized telescope control. By connecting your mount to a PC, you can use the ASCOM platform to automate imaging sessions with software like N.I.N.A. or Sequence Generator Pro, or slew to targets directly from planetarium programs like Stellarium and Cartes du Ciel. Note that modern computers without a native serial port will require a separate, high-quality USB-to-RS232 adapter to use this cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the iOptron RS232-RJ9 Serial Cable used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe iOptron RS232-RJ9 cable is used for two primary purposes: \u003cstrong\u003efirmware updates\u003c\/strong\u003e for the mount and hand controller, and \u003cstrong\u003edirect PC control\u003c\/strong\u003e of the mount using planetarium software or ASCOM-compliant imaging applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need this iOptron cable to update the firmware on my mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, for most iOptron mounts, this specific cable is required to connect the mount's RJ9 port to a computer's serial port to perform firmware updates. Using an incorrect cable can fail to establish a connection or potentially damage the mount's electronics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy computer doesn't have a serial port. Can I still use the iOptron RS232-RJ9 cable?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, but you will need an additional accessory. If your computer only has USB ports, you must use a \u003cstrong\u003ehigh-quality USB-to-RS232 (DB9) adapter\u003c\/strong\u003e. The adapter creates a virtual COM port on your computer, which you then connect this iOptron cable to.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this cable allow me to control my iOptron mount with software like Stellarium or N.I.N.A.?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This cable provides the physical connection needed for software control. Once connected (with a USB-to-Serial adapter, if necessary), you will need to install the appropriate iOptron ASCOM driver on your PC. This driver allows applications like Stellarium, Cartes du Ciel, or N.I.N.A. to communicate with and control your mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the same cable that connects the hand controller to the iOptron mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, it is not. The cable that connects the hand controller to the mount is typically a coiled cable with RJ9 or similar connectors on both ends. This RS232-RJ9 cable is specifically for connecting the mount (or hand controller port) to a computer's serial port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I connect the iOptron RS232-RJ9 cable to control my CEM40 for imaging the Orion Nebula (M42)?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo control your iOptron CEM40, you connect the RJ9 end of this cable to the serial port on the mount. The other end (RS232) connects to your computer or a USB-to-Serial adapter. After installing the iOptron Commander and ASCOM driver, you can use your preferred planetarium or imaging software to slew to M42 and begin your imaging sequence.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 1\u003c\/td\u003e\n\u003ctd\u003eRS232 (DB9 Female)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector 2\u003c\/td\u003e\n\u003ctd\u003eRJ9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eiOptron mounts with RJ9 serial port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eiOptron RS232-RJ9 Serial Cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":44967949664541,"sku":"IOP-8412","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/IOP-8412__32786.1639769251.1280.1280.jpg?v=1684347237"},{"product_id":"ioptron-usb-to-rs232-converter","title":"iOptron USB to RS232 converter","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eConnects iOptron mounts with RS232 ports to modern computers via USB\u003c\/li\u003e\n\u003cli\u003eEnables firmware updates for hand controllers and main boards\u003c\/li\u003e\n\u003cli\u003eAllows for direct PC control using planetarium software and ASCOM drivers\u003c\/li\u003e\n\u003cli\u003eOfficial iOptron accessory ensures driver compatibility and reliable connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron USB to RS232 Converter\u003c\/h2\u003e\n\u003cp\u003eThe iOptron USB to RS232 converter is the essential link between your iOptron mount and a modern computer. As laptops and desktops have phased out legacy serial ports, this adapter provides a reliable data connection through a standard USB port, enabling critical communication for firmware updates and advanced computer control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eEssential Connectivity for iOptron Mount Firmware and PC Control\u003c\/h3\u003e\n\u003cp\u003eThis converter is the officially supported method for updating the firmware on your iOptron mount's hand controller and main control board. Using the correct, tested hardware is critical for preventing communication errors during the update process, which could otherwise render a mount inoperable. Beyond firmware, it unlocks the ability to control your mount directly from a PC.\u003c\/p\u003e\n\u003cp\u003eBy connecting your mount to a computer, you can leverage ASCOM drivers to interface with popular planetarium software like Cartes du Ciel, Stellarium, or TheSkyX. This allows you to command your mount from a rich visual interface, replacing the hand controller for object selection and slewing, and is a foundational step for automated imaging sequences.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy do I need the iOptron USB to RS232 converter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eMost modern computers no longer include the 9-pin RS232 serial port that iOptron mounts use for firmware updates and direct computer control. The \u003cstrong\u003eiOptron USB to RS232 converter\u003c\/strong\u003e bridges this gap, allowing you to connect your mount's serial port to a standard USB port on your laptop or PC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a generic USB-to-serial adapter with my iOptron mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile some generic adapters may work, many use chipsets with unreliable drivers that can cause connection drops or data corruption, especially during a critical firmware update. Using the official \u003cstrong\u003eiOptron USB to RS232 converter\u003c\/strong\u003e is highly recommended as it has been tested to ensure stable, error-free communication with their mounts and software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat software can I use with the iOptron USB to RS232 converter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis converter enables you to connect your mount to a wide range of software. Primarily, you will use it with iOptron's own firmware upgrade utility. For telescope control, it works with any software that communicates via the ASCOM platform, including popular choices like N.I.N.A., Sequence Generator Pro, Cartes du Ciel, and Stellarium.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I use this converter to update the firmware on my iOptron CEM40 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eTo update your iOptron CEM40, you will connect the RS232 end of the cable that came with your mount to the port on the mount, and the other end to this converter. Plug the converter's USB end into your computer. After installing the necessary drivers from iOptron's website, you can run the iOptron Upgrade Utility software to load the new firmware onto the mount's main board and hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the iOptron USB to RS232 converter require special drivers?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, like most USB-to-serial devices, a driver is required to create a virtual COM port on your computer. You should download the latest drivers directly from the support section of the iOptron website to ensure compatibility with your operating system, whether it's Windows or macOS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy new laptop only has USB-C ports. Can I still use this iOptron converter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The iOptron converter terminates in a standard USB-A connector. You can use it with a USB-C-only laptop by using a simple, widely available USB-A to USB-C adapter or a USB-C hub that has USB-A ports. The connection will function identically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":44967950090525,"sku":"IOP-8435","price":39.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/products\/IOP-8435__09416.1639769343.1280.1280.jpg?v=1684347239"},{"product_id":"zwo-amh-hand-controller","title":"ZWO AMH Hand Controller","description":"\u003cul class=\"DAV-feature-list\"\u003e\n    \u003cli\u003e\n        Allows to control AM3 \u0026amp; AM5 mounts\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n    \u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n    \u003cli\u003eIn the Box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n    \u003cli class=\"active\"\u003e       \n        \u003cdiv\u003e\n            \u003c!-- Title image text --\u003e\n            \u003cdiv class=\"DAV-bg-light\"\u003e\n                \u003c!-- Main Image --\u003e\n                \u003cdiv class=\"DAV-section-center\"\u003e\n                    \u003ch2\u003eZWO AMH Hand Controller - Overview\u003c\/h2\u003e\n                    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-AM3-WIRELESS-HAND-CONTROLLER-OPERATION.webp?v=1736534733\" alt=\"ZWO AMH Hand Controller - Overview\" class=\"DAV-img-banner\"\u003e\n                    \u003cp\u003e\n                        The ZWO ASI Mount Hand Controller features an intuitive joystick, enabling effortless movement of your ZWO AM3 or ZWO AM5 along both axes. Its ergonomic design fits comfortably in your hands, providing smooth control in all directions.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \n            \u003cdiv class=\"DAV-section-container\"\u003e\n                \u003cdiv class=\"DAV-section-text\"\u003e\n                    \u003ch3\u003e\n                        Rocker-style Hand Controller\n                    \u003c\/h3\u003e                \n                    \u003cp\u003e\n                        Comfortable touch and easy to use. Integrated with Wi-Fi network allowing for wireless control. You can easily upgrade the firmware of the hand controller and mount it on the webpage.\n                    \u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/li\u003e    \n\n    \u003cli\u003e\n        \u003cul class=\"DAV-grid\"\u003e\n            \u003cli class=\"DAV-grid-item\"\u003e\n                \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-AMH-HAND-CONTROLLER.webp?v=1736537845\" alt=\"ZWO AMH Hand Controller - In The Box\" class=\"DAV-img-box\"\u003e\n                \u003cdiv\u003e\n                    \u003cp class=\"DAV-item-title\"\u003e\n                        AMH Hand Controller\n                    \u003c\/p\u003e\n                    \u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n                \u003c\/div\u003e\n            \u003c\/li\u003e\n            \u003c!-- Add more items as needed --\u003e\n        \u003c\/ul\u003e          \n    \u003c\/li\u003e\n\n\u003c\/ul\u003e\n","brand":"David Astro","offers":[{"title":"Default Title","offer_id":49561033867549,"sku":"ZWO-AMH","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/ZWO-AMH-HAND-CONTROLLER.webp?v=1736537845"},{"product_id":"tele-vue-pano-telepod-gib-encoder-kit","title":"Tele Vue Pano-TelePod- Gib Encoder Kit","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAdds Digital Setting Circle (Push-To) capability to compatible mounts\u003c\/li\u003e\n\u003cli\u003eHigh-Resolution 2160-step encoders for precise pointing\u003c\/li\u003e\n\u003cli\u003eCompatible with Tele Vue Panoramic, Tele-Pod, and newer Gibraltar mounts\u003c\/li\u003e\n\u003cli\u003eIncludes all required encoders, wiring, and hardware\u003c\/li\u003e\n\u003cli\u003eEnables use with Tele Vue Sky Tour and other DSC computers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eUnlock the Sky with Your Tele Vue Mount\u003c\/h2\u003e\n\u003cp\u003eThe Tele Vue Pano-TelePod-Gib Encoder Kit (STN-4001) is the definitive upgrade for adding 'Push-To' digital setting circle capabilities to your Tele Vue alt-azimuth mount. This kit bridges the gap between purely manual observing and computerized object location. It provides the hardware to transform your fluid, intuitive Tele Vue mount into a precision instrument that can pinpoint thousands of celestial objects, all without sacrificing the hands-on feel that makes these mounts a joy to use.\u003c\/p\u003e\n\u003cp\u003eDesigned for seamless integration, this kit allows you to spend less time hunting for faint fuzzies and more time observing them. By pairing your mount with a digital setting circle (DSC) computer like the Tele Vue Sky Tour, you simply perform a quick two-star alignment. After that, the computer will guide you, providing real-time directional cues to push your telescope directly to any object in its database. It’s the perfect balance of technology and traditional observing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eHigh-Resolution Optical Encoders\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the system are two high-resolution optical encoders, one for the altitude (vertical) axis and one for the azimuth (horizontal) axis. These are not simple magnetic counters. Each encoder provides 2160 distinct steps, or \"ticks,\" per revolution, translating to a pointing resolution of 0.167 degrees. This level of precision is critical for placing objects in the eyepiece at medium to high magnifications, ensuring that when your DSC reads \"zero-zero,\" your target is waiting for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCustom-Engineered Delrin Housings\u003c\/h3\u003e\n\u003cp\u003eThe encoders are protected by robust, custom-machined Delrin housings. These housings serve a dual purpose. First, they shield the sensitive encoder electronics from dew, dust, and accidental bumps in the dark. Second, and more importantly, they provide a precise, no-slip mechanical interface between the encoders and the mount's moving axes. This direct coupling is essential for accurate pointing, as any mechanical play would introduce errors into the system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eIntegrated Wiring for Snag-Free Operation\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a complete wiring harness designed for a clean installation. A main harness connects the two encoders to a central junction box, and a separate \"pigtail\" harness connects the junction box to your DSC computer. This modular approach, combined with included Velcro fasteners, allows for tidy cable management, minimizing the risk of wires snagging or pulling as you move the telescope across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eBroad Mount Compatibility for Tele Vue Systems\u003c\/h3\u003e\n\u003cp\u003eThis encoder kit is engineered specifically for Tele Vue's lightweight, grab-and-go mounts. It is fully compatible with the Panoramic mount, the Tele-Pod head, and newer Gibraltar mounts that utilize the Tele-Pod head. The included hardware ensures a perfect fit, turning these already excellent manual mounts into powerful object-locating tools. This targeted design guarantees that the installation is straightforward and the performance is reliable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe Power of \"Push-To\" Astronomy\u003c\/h3\u003e\n\u003cp\u003eAdding encoders to your mount fundamentally changes your observing sessions, especially under light-polluted skies or when hunting for challenging objects. Imagine wanting to view the galaxy M101. Instead of star-hopping through a faint field, your DSC computer guides you, telling you to move \"Up 14.2°, Left 35.7°\". As you push the scope, the numbers count down, and when they reach zero, the galaxy is in your eyepiece. This system allows you to find and observe dozens of objects in a single night.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAn Honest Limitation: Not a Go-To System\u003c\/h3\u003e\n\u003cp\u003eIt is important to understand that this is an encoder kit for \"Push-To\" functionality, not a motorized \"Go-To\" system. The kit provides the position information; you provide the motion. This has the significant advantage of requiring no external power for motors, resulting in a lighter, faster, and silent setup. However, it does not offer motorized tracking, so you will still need to manually guide the telescope to follow an object as it moves across the sky.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eChoosing the Right Upgrade for Your Tele Vue Mount\u003c\/h3\u003e\n\u003cp\u003eThis kit is the only solution for adding digital setting circles to the Panoramic and Tele-Pod mounts. For Gibraltar mount owners, it's crucial to identify your model.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePano-TelePod-Gib Encoder Kit (STN-4001):\u003c\/strong\u003e This is the correct kit if you own a Panoramic mount, a Tele-Pod mount, or a newer Gibraltar mount that uses the Tele-Pod style head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOlder Gibraltar Mounts:\u003c\/strong\u003e If you have an older Gibraltar mount (pre-2013), you will require a different, specific encoder set. This kit (STN-4001) is not compatible with the older Gibraltar head design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis upgrade is for the observer who loves the simplicity and tactile feel of their Tele Vue mount but wants to eliminate the frustration of finding difficult targets. It adds a powerful layer of digital assistance without compromising the core experience of moving a telescope by hand under the stars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat do I need besides this kit to get Push-To functionality?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou will need a Digital Setting Circle (DSC) computer, such as the Tele Vue Sky Tour or a compatible unit from another manufacturer. The encoder kit provides the position data, and the DSC computer provides the user interface and object database.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this kit fit my older Tele Vue Gibraltar mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This STN-4001 kit is specifically for the Panoramic, Tele-Pod, and newer Gibraltar mounts that use the Tele-Pod head. Older Gibraltar mounts require a different encoder kit. Please verify your mount model before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs installation difficult? Do I need to drill any holes?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is straightforward and does not require any permanent modification or drilling of your mount. The kit is designed to bolt on using existing attachment points. Tele Vue provides detailed instructions to guide you through the process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this kit add a lot of weight to my mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, the entire kit is very lightweight, weighing only a few ounces. It will not noticeably affect the balance or smooth motion of your Tele Vue mount, preserving its grab-and-go portability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this a Go-To kit with motors?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis is not a Go-To kit. It is a \"Push-To\" system that tells you where to point your telescope, but you move it manually. It does not include motors and cannot automatically track objects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use this encoder kit with a non-Tele Vue DSC computer?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, these high-resolution encoders are compatible with most standard DSC computers on the market from manufacturers like Lumicon, JMI, and Celestron. You may need a different cable to connect the junction box to your specific computer model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Code\u003c\/td\u003e\n\u003ctd\u003eSTN-4001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEncoder Resolution\u003c\/td\u003e\n\u003ctd\u003e2160 steps per revolution (0.167° per step)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Compatibility\u003c\/td\u003e\n\u003ctd\u003eTele Vue Panoramic Mount, Tele-Pod Mount, Newer Gibraltar Mounts (with Tele-Pod head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSC Computer Compatibility\u003c\/td\u003e\n\u003ctd\u003eTele Vue Sky Tour, other standard DSC computers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 8 oz (227 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAltitude Encoder Assembly\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eAzimuth Encoder Assembly\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eMain Wiring Harness\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003ePigtail Harness\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eHarness Junction Box with Velcro\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eHardware Parts Bag (screws and Allen keys)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.televue.com\/images\/TV5_public\/instructions\/Mounts\/Encoder_install_STN-4001.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/tele-vue-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eTele Vue 5-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":51223882203421,"sku":"TV-STN-4001","price":574.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Tele_Vue_Pano-TelePod_Gib_Encoder_Kit_1.jpg?v=1777515027"},{"product_id":"tele-vue-dsc-computer-azimuth-spacers-for-5-head","title":"Tele Vue DSC - Computer Azimuth Spacers for 5 Head","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eEnables Encoder Installation on Gibraltar HD5 Mounts\u003c\/li\u003e\n\u003cli\u003eProvides Necessary Clearance for Azimuth Encoder Cover\u003c\/li\u003e\n\u003cli\u003ePrecision-Machined for a Perfect Fit\u003c\/li\u003e\n\u003cli\u003eRequired for Tele Vue Sky Tour DSC Integration\u003c\/li\u003e\n\u003cli\u003eDurable Anodized Aluminum Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eUnlock Digital Setting Circles on Your Gibraltar HD5 Mount\u003c\/h2\u003e\n      \u003cp\u003eThe Tele Vue DSC - Computer Azimuth Spacers for 5 Head (STS-5002) are a required component for observers who wish to add the powerful Sky Tour digital setting circle (DSC) system to their Tele Vue Gibraltar HD5 mount. These precision-machined spacers solve a critical clearance issue, making the installation of the azimuth encoder possible on the larger HD5 head. Without them, the encoder cover cannot be fastened, preventing the use of Tele Vue's popular push-to object locator system.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eEngineered for a Perfect Fit on the Gibraltar HD5\u003c\/h3\u003e\n      \u003cp\u003eThe Gibraltar HD5 mount head was designed with a wider baseplate to accommodate Tele Vue's larger 5-inch refractors, providing a more stable platform. This added width, however, creates a gap that prevents the standard azimuth encoder cover from seating correctly. The STS-5002 spacers are precisely dimensioned to fill this gap, providing a secure and stable mounting surface for the cover. This ensures the sensitive encoder is protected and the mount's azimuth axis can report its position accurately to the Sky Tour computer.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eThe Gateway to Your Sky Tour Upgrade\u003c\/h3\u003e\n      \u003cp\u003eFor owners of the robust Gibraltar HD5 mount, the path to computerized object-finding runs directly through these spacers. If you are purchasing the Sky Tour Encoder Kit (STN-4001) for your HD5, these spacers are not optional, they are essential. They represent the final mechanical link needed to integrate the digital hardware with your manual alt-azimuth mount, transforming it into a sophisticated tool for quickly locating thousands of celestial objects.\u003c\/p\u003e\n      \u003cp\u003eThe installation is straightforward, designed to be performed by the mount owner. The spacers fit between the mount head's baseplate and the azimuth encoder cover, allowing the fastening screws to engage properly. This simple addition unlocks the full potential of your mount, bridging the gap between solid, manual observing and the efficiency of a digital pointing system.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eA Note on Compatibility and Purpose\u003c\/h3\u003e\n      \u003cp\u003eIt is important to understand the specific application for this part. The STS-5002 spacers are designed exclusively for the Tele Vue Gibraltar HD5 mount head. They are not needed for the smaller Gibraltar HD4 head or the original Tele-Pod mounts. Their sole function is to facilitate the installation of the Sky Tour system's azimuth encoder, making them a niche but indispensable part for a specific upgrade path.\u003c\/p\u003e\n      \u003cp\u003eIf you own a Gibraltar HD5 and have ever considered adding Sky Tour, these spacers are the key. They ensure that the investment you've made in a high-quality manual mount can be enhanced with the convenience and power of digital setting circles, without compromising the integrity or function of the original hardware.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need these spacers for my Gibraltar HD4 mount?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, these spacers are only required for the larger Gibraltar HD5 mount head. The HD4 and standard Gibraltar mounts do not have the wider baseplate and can accept the Sky Tour encoder kit without these spacers.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eAre the STS-5002 spacers included with the Gibraltar HD5 mount or the Sky Tour kit?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eNo, the STS-5002 spacers must be purchased separately. They are a dedicated part required only when adding a Sky Tour system to a Gibraltar HD5 mount.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat exactly do these spacers do?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThey provide the necessary clearance to properly fasten the azimuth encoder's protective cover to the wider baseplate of the Gibraltar HD5 mount head. Without them, the cover cannot be installed, and the Sky Tour system cannot be fully mounted.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs installing the Sky Tour encoders and these spacers difficult?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe installation is designed to be user-friendly for amateur astronomers with basic mechanical aptitude. Tele Vue provides instructions, and the process involves fastening the spacers and cover with standard screws.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use these spacers for anything else?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThese spacers are designed for a single, specific purpose: enabling the installation of the Sky Tour azimuth encoder on a Gibraltar HD5 mount. They do not serve any other function as a general-purpose telescope accessory.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eProduct Code\u003c\/td\u003e\n\u003ctd\u003eSTS-5002\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eTele Vue Gibraltar HD5 Mount Head\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eEnables installation of Sky Tour Azimuth Encoder Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAnodized Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \u003cli class=\"DAV-grid-item\"\u003e\n       \u003cdiv\u003e\n        \u003cp class=\"DAV-item-title\"\u003eTele Vue DSC - Computer Azimuth Spacers for 5 Head\u003c\/p\u003e\n        \u003cp class=\"DAV-item-subtitle\"\u003e× 1 Set\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/tele-vue-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eTele Vue 5-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":51223882268957,"sku":"TV-STS-5002","price":38.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Tele_Vue_DSC_Computer_Azimuth_Spacers_1.jpg?v=1777515021"},{"product_id":"primalucelab-pl3600088","title":"PrimaLuceLab GPS antenna for EAGLE4\/5\/6","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eOfficial Replacement for EAGLE4, EAGLE5, and EAGLE6\u003c\/li\u003e\n\u003cli\u003eProvides Accurate GPS Time \u0026amp; Location Data\u003c\/li\u003e\n\u003cli\u003eEssential for Precise Mount GoTo Alignment\u003c\/li\u003e\n\u003cli\u003ePlug-and-Play with Compatible EAGLE Units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eGPS antenna for EAGLE4\/5\/6\u003c\/h2\u003e\n      \u003cp\u003eThis is the official OEM replacement GPS antenna for the PrimaLuceLab EAGLE4, EAGLE5, and EAGLE6 control units. It restores the critical GPS signal lock required for your mount to obtain precise location and time data from satellites. This ensures your telescope's GoTo system has the accurate coordinates needed for initial alignment and tracking.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eOfficial GPS Replacement for EAGLE4, EAGLE5, and EAGLE6\u003c\/h3\u003e\n      \u003cp\u003eThe GPS antenna is a critical component of your EAGLE-powered setup, providing your mount with the precise time and location data necessary for accurate GoTo slews and tracking. This unit is the official, manufacturer-supplied replacement for the antenna originally included with your EAGLE4, EAGLE5, or EAGLE6.\u003c\/p\u003e\n      \u003cp\u003eIf your original antenna has been lost or damaged, this replacement will restore full GPS functionality. Please note this antenna is specifically designed for the EAGLE4, EAGLE5, and EAGLE6 models and is not compatible with any previous versions of the EAGLE.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhy is a GPS signal important for my EAGLE-controlled telescope?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eA GPS signal provides your telescope mount with \u003cstrong\u003ehighly accurate time and location data\u003c\/strong\u003e. This information is fundamental for the mount's computer to build a correct model of the sky, enabling precise GoTo slewing to objects and accurate sidereal tracking for astrophotography.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIs this GPS antenna compatible with my EAGLE3?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003e\u003cstrong\u003eNo.\u003c\/strong\u003e This GPS antenna is exclusively designed for the PrimaLuceLab EAGLE4, EAGLE5, and EAGLE6 models. It is not backwards-compatible with EAGLE, EAGLE2, or EAGLE3 control units due to differences in hardware connections and protocols.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eMy new EAGLE5 didn't come with this antenna. Should I buy this one?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe GPS antenna is a standard accessory included in the box with every new EAGLE4, EAGLE5, and EAGLE6. This product listing is for a \u003cstrong\u003ereplacement part\u003c\/strong\u003e in case your original antenna was lost or damaged. Please check your original packaging first.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the EAGLE4 use this GPS data for astrophotography?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe EAGLE4 automatically reads the precise time and geographic coordinates (latitude and longitude) from the GPS antenna. It then passes this data to your mount control software, such as PLAY. This automates the initial setup for your imaging session, eliminating the need to manually enter this information and reducing the chance of alignment errors.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eIf I travel to a new dark sky site, do I need this GPS antenna for my EAGLE6?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eYes, this is one of its primary functions. When you move to a new location, the GPS antenna for the EAGLE6 automatically detects the new coordinates. Your mount's GoTo system will then use this updated location for its sky alignment, ensuring objects are centered correctly without you needing to manually look up and enter new coordinates.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use a third-party GPS antenna with my EAGLE5?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eIt is strongly recommended to use only the official PrimaLuceLab GPS antenna. This ensures guaranteed electronic compatibility, proper signal reception, and correct physical connection with the EAGLE4, EAGLE5, and EAGLE6 units.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/primalucelab-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003ePrimaLuceLab 1-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PrimaLuceLab","offers":[{"title":"Default Title","offer_id":52913359913245,"sku":"PLL-PL3600088","price":91.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/PrimaLuceLab-GPS-antenna-for-EAGLE4-5-6-1_bd9da839-fad2-4429-afa5-0000ec1234cd.jpg?v=1789089876"},{"product_id":"ioptron-8438","title":"iOptron GPS Module for CEM26\/GEM28\/CEM40\/GEM45 Mounts","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eAutomatically inputs time, date, and location\u003c\/li\u003e\n\u003cli\u003eEliminates manual coordinate entry for faster setup\u003c\/li\u003e\n\u003cli\u003eIncreases the accuracy of initial GoTo alignments\u003c\/li\u003e\n\u003cli\u003eDesigned for iOptron CEM26, GEM28, CEM40, and GEM45 mounts\u003c\/li\u003e\n\u003cli\u003eSimple plug-and-play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron GPS Module for CEM26\/GEM28\/CEM40\/GEM45 Mounts\u003c\/h2\u003e\n\u003cp\u003eThe iOptron GPS Module for CEM26, GEM28, CEM40, and GEM45 mounts automates the most critical step of your initial setup. This compact accessory feeds precise time, date, and location data directly to your mount's GoTo system, eliminating the need for manual entry. By removing the potential for human error, it guarantees your alignment is based on accurate coordinates from the very start of your observing session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAutomated GoTo Alignment: Accurate Time and Location Data\u003c\/h3\u003e\n\u003cp\u003eAchieving accurate GoTo slews and tracking depends entirely on the quality of your initial alignment. The iOptron GPS Module removes any guesswork by automatically populating your hand controller with the correct time, date, and geographical coordinates. This ensures your mount has the precise foundational data it needs for a successful star alignment, saving you valuable time in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSeamless Integration for CEM26, GEM28, CEM40, and GEM45 Mounts\u003c\/h3\u003e\n\u003cp\u003eThis GPS module is engineered specifically for use with iOptron's popular CEM26, GEM28, CEM40, and GEM45 equatorial mounts. It connects directly to the mount's designated port, establishing a reliable data link without complex configuration. The module is a true plug-and-play accessory designed to work perfectly with the mount's firmware and hand controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the iOptron GPS Module for CEM40\/GEM45 improve GoTo accuracy?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe module provides your mount with precise, real-time location and time data, which is the foundation for an accurate sky model. This eliminates errors from manually entering incorrect coordinates or time, leading to more reliable GoTo slews and better tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDo I need to manually enter my location every time with the GPS Module for CEM26\/GEM28?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The primary purpose of this module is to automate that process. Once connected, it will automatically detect your location and the current time, sending the information to the mount as soon as it powers on.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI travel to different dark sky sites with my GEM45 mount. Is this GPS Module a good accessory for me?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, it's an ideal accessory for observers who travel. Instead of having to look up and manually enter new coordinates for each location, the GPS Module automatically updates your position, making setup at a new site significantly faster and more convenient.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I'm setting up my CEM26 in my backyard for imaging the Orion Nebula (M42), do I still need the GPS module?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile you can manually enter your fixed backyard coordinates, the GPS module still offers a key benefit by providing the exact current time, synced to global positioning satellites. This precision eliminates one more variable and helps ensure your mount's internal clock is perfect, which is beneficial for long-exposure imaging and tracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the GPS Module for CEM26\/GEM28\/CEM40\/GEM45 difficult to install?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eInstallation is designed to be very simple. The module plugs into a dedicated port on the mount. It's a plug-and-play device that requires no special software or configuration to function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWill this GPS module work with other iOptron mounts, like a CEM70?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis module is specifically designed and verified for the \u003cstrong\u003eCEM26, GEM28, CEM40, and GEM45\u003c\/strong\u003e mount series. For compatibility with other mounts like the CEM70, you should check for the GPS module designed for that specific model to ensure proper function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron 2-Year Limited Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917312848157,"sku":"IOP-8438","price":175.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-GPS-Module-for-CEM26-GEM28-CEM40-GEM45-1_cf98c626-5e48-41da-89e9-cd9aca3b5eae.jpg?v=1789142571"},{"product_id":"ioptron-8480","title":"iOptron iMate Astronomy Control Box","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eIntegrated astronomy device control hub\u003c\/li\u003e\n\u003cli\u003eRuns a curated version of Kstars\/Ekos and INDI\u003c\/li\u003e\n\u003cli\u003ePowers cameras, focusers, and accessories\u003c\/li\u003e\n\u003cli\u003eGenerates a strong local Wi-Fi network for remote operation\u003c\/li\u003e\n\u003cli\u003eDesigned for lightweight, portable OSC imaging rigs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eiOptron iMate Astronomy Control Box\u003c\/h2\u003e\n\u003cp\u003eThe iOptron iMate Astronomy Control Box is designed to solve one of the biggest challenges in modern astrophotography: software integration. Instead of leaving you to assemble and debug a collection of disparate software components, iOptron has curated the powerful Kstars\/Ekos and INDI framework into a single, unified hardware device. The iMate manages your mount, camera, focuser, and guider from one control point, aiming to deliver a functional imaging product, not a DIY electronics project.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Curated Kstars\/Ekos Experience: Product, Not Project\u003c\/h3\u003e\n\u003cp\u003eAt its core, the iMate is an EAA and imaging integrator. It provides a stable, pre-configured software environment that shields you from the complexities of managing asynchronous updates and dependencies within the INDI ecosystem. This approach allows you to focus on astronomy rather than Linux system administration.\u003c\/p\u003e\n\u003cp\u003eThe system is built to control a complete imaging train. Based on user field reports, it successfully manages setups including iOptron mounts like the GEM45, OSC cameras, electronic focusers like the SESTO SENSO 2, and ZWO guide cameras, handling both control signals and power distribution for the connected accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eStrong, Self-Generated Wi-Fi for Remote Field Control\u003c\/h3\u003e\n\u003cp\u003eThe iMate generates its own robust Wi-Fi hotspot, a critical feature for field use where home internet is unavailable. This allows you to connect and control your entire rig wirelessly from a laptop, tablet, or even from the warmth of your house. The signal is reported to be strong enough for reliable indoor access while the scope operates outside.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eiMate vs. a DIY Raspberry Pi Solution: Integration vs. Raw Power\u003c\/h3\u003e\n\u003cp\u003eThe iMate is often compared to DIY solutions built on single-board computers like a Raspberry Pi 4 or 5. The choice between them comes down to a fundamental trade-off.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eiOptron iMate:\u003c\/strong\u003e You are buying a pre-integrated, supported product. iOptron manages the software \"baseline,\" ensuring all components work together out of the box. This path prioritizes stability and ease of use over raw processing capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Raspberry Pi:\u003c\/strong\u003e This route offers more processing power, which can result in faster plate solves and a more responsive interface. However, you are responsible for all software installation, configuration, troubleshooting, and component integration. It is a project, not a product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUnderstanding the iMate's Known Trade-Offs\u003c\/h3\u003e\n\u003cp\u003eAs a focused, low-cost control unit, the iMate has specific design limitations that potential buyers should be aware of. Field reports indicate that plate solving and FITS file displays can be sluggish, a consequence of its processing hardware being prioritized for reliable imaging capture over interface speed.\u003c\/p\u003e\n\u003cp\u003eUsers have also noted several operational quirks, such as the need to manually set the time for each session and an inability to update the onboard KStars version independently. Furthermore, the companion iPolar mobile app is a simplified version that lacks some advanced calibration features found in the desktop software, a trade-off for mobile convenience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main advantage of the iOptron iMate over a DIY controller?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe primary advantage is \u003cstrong\u003esoftware integration and support\u003c\/strong\u003e. The iMate is a pre-configured product where iOptron manages the Kstars\/Ekos\/INDI software stack to ensure all components work together reliably. This saves you the time and potential frustration of building, configuring, and troubleshooting a system from individual parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the iMate's Wi-Fi perform in the field?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe iMate generates its own Wi-Fi hotspot, which has been reported by users as strong and reliable. It is designed to allow you to control your telescope and imaging equipment wirelessly, even from indoors while the rig is outside.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the known limitations of the iMate's iPolar application?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe iMate uses a mobile phone version of the iPolar app for polar alignment. This version is a more streamlined tool and reportedly lacks some of the advanced camera position calibration features available in the full desktop iPolar application. It provides basic alignment but may not be as fast or precise for users accustomed to the desktop version.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan the iOptron iMate power my entire imaging rig?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe iMate is designed to power and control accessories like your camera, focuser, and guide camera. However, it is recommended to power your telescope mount (like a GEM45) and any high-draw dew heaters from a separate power source to ensure stable operation for all components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the iMate handle plate solving with a GEM45 and an OSC camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile the iMate successfully controls imaging sessions with this type of equipment, its processing power is modest. Users report that plate solving can be sluggish. The system is optimized for reliable, stable image capture rather than high-speed plate solving or FITS file rendering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the iMate a good control solution for a portable setup with a Sky-Watcher HEQ5 mount?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, the iMate is well-suited for portable rigs. Its purpose as a single, lightweight box that manages all your devices via Wi-Fi is ideal for minimizing cables and complexity in the field. It should control an HEQ5 mount and associated cameras\/focusers via its INDI-based platform, just as it does with iOptron's own mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBad purchase!\u003c\/td\u003e\n\u003ctd\u003eAugust 3, 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/ioptron-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eiOptron Warranty Policy\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iOptron","offers":[{"title":"Default Title","offer_id":52917313863965,"sku":"IOP-8480","price":307.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/iOptron-iMate-Astronomy-Control-Box-1_e61b9058-cafc-430a-a0ea-aa54d9100a58.jpg?v=1789142597"},{"product_id":"wanderer-astro-wanderer-electronic-tilt-adjuster-m54","title":"Wanderer Astro ETA M54 Electronic Tilt Adjuster","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eThree Motorized Adjusters\u003c\/li\u003e\n\u003cli\u003e2 Micron Positioning Accuracy\u003c\/li\u003e\n\u003cli\u003e5mm Back Focus Consumption\u003c\/li\u003e\n\u003cli\u003e470g Total Weight\u003c\/li\u003e\n\u003cli\u003eFull NINA Integration for Auto-Tilt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWanderer ETA M54 Electronic Tilt Adjuster\u003c\/h2\u003e\n\u003cp\u003eThe Wanderer ETA M54 replaces manual guesswork with three motorized adjusters, achieving a positioning accuracy of 2 microns over a 1.2mm range. It consumes only 5mm of back focus and weighs just 470g, allowing it to integrate into standard 55mm imaging trains without extensive reconfiguration. Each step from the high-precision encoders delivers 0.3 microns of adjustment, enabling remote correction of sensor tilt even in temperatures down to -20°C.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eRemote Tilt Correction with 2 Micron Accuracy\u003c\/h3\u003e\n\u003cp\u003eThe Wanderer ETA M54 ends the frustration of adjusting tilt screws by hand in the dark. It employs three independent motors paired with three high-precision encoders to manage your camera's orientation. This system provides a total adjustment range of 1.2mm with a motor resolution of just 0.3 microns per step.\u003c\/p\u003e\n\u003cp\u003eThis level of precision allows you to achieve a final positioning accuracy of up to 2 microns, which is critical for correcting field tilt in fast focal ratio systems and large-format sensors. The robust design is tested to remain fully operational at -20°C, ensuring reliable remote adjustments during harsh winter imaging sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUltra-Thin 5mm Profile for 55mm Back Focus Chains\u003c\/h3\u003e\n\u003cp\u003eEngineered for seamless integration, the Wanderer ETA M54 features an exceptionally thin design that consumes only 5mm of back focus. This allows it to be mounted directly to your camera or in front of an Off-Axis Guider (OAG) while still maintaining the industry-standard 55mm back focus distance for most coma correctors and reducers.\u003c\/p\u003e\n\u003cp\u003eAt just 470g, the ETA M54 adds minimal weight to the imaging train, reducing the risk of flexure or strain on your focuser. A dual-layer nested structure ensures complete light-tightness, preventing any internal reflections or external light leaks from degrading your images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eFully Automated Tilt Adjustment with NINA\u003c\/h3\u003e\n\u003cp\u003eAutomatic tilt correction is now a reality thanks to the Wanderer ETA M54's seamless integration with N.I.N.A. imaging software. Through the WandererEmpire software driver, you can run automated routines that analyze star shapes across the field and command the ETA M54 to make the precise corrections needed for a perfectly flat focal plane.\u003c\/p\u003e\n\u003cp\u003eThis system completely removes the trial-and-error process from tilt adjustment, saving you valuable imaging time. For manual control, the WandererEmpire interface provides a clear, visual representation of the tilt plate's current position, allowing for intuitive, real-time adjustments from your control computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat problem does the Wanderer ETA M54 solve compared to a manual tilter?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe Wanderer ETA M54 eliminates the difficult, imprecise, and frustrating process of adjusting tilt screws by hand in the dark. It provides remote, motorized control with a positioning accuracy of 2 microns, a level of precision manual adjustment cannot reliably achieve, especially on remote setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the Wanderer ETA M54 in my existing 55mm back focus imaging train?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Wanderer ETA M54 is designed with an ultra-thin 5mm profile. This allows it to be installed, typically in front of an OAG or camera, while still maintaining the standard 55mm back focus distance required by most correctors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the Wanderer ETA M54 perform with fast imaging systems like an f\/2 RASA or HyperStar?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFast optical systems are extremely sensitive to sensor tilt. The ETA M54's ability to make repeatable, remote adjustments with a resolution of 0.3 microns and an accuracy of 2 microns is critical for achieving sharp, round stars from edge to edge with these demanding instruments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan the Wanderer ETA M54 adjust tilt automatically?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Wanderer ETA M54 has seamless integration with N.I.N.A. via the WandererEmpire software. This allows for fully automated tilt analysis and correction routines, removing the need for manual intervention during an imaging session.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow much weight and back focus does the Wanderer ETA M54 add to my setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe device adds only 470g to your imaging train and consumes just 5mm of back focus, making it a lightweight and optically thin addition to most setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI use a QHY268M camera. How do I install the Wanderer ETA M54?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eFor cameras like the QHY268M, the Wanderer ETA M54 can be directly mounted to the camera body. This configuration is often used to maintain the standard 55mm back focus, as outlined in the user manual for specific QHY imaging train examples.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Wanderer_Astro_Wanderer_ETA_M54_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.7 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.wandererastro.com\/en\/h-col-106.html\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/wanderer-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWanderer Astro 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wanderer Astro","offers":[{"title":"Default Title","offer_id":52940498043165,"sku":"WA-WETA54","price":1189.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/WandererAstro-Wanderer-ETA-M54-1_c5c8c3c7-bdaf-4095-85fc-02a7680fb0ef.jpg?v=1789564386"},{"product_id":"qhyccd-pcie-kit","title":"QHYCCD PCIE Grabber Card Kit","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eEnables 2x10Gbps High-Speed Data Transfer\u003c\/li\u003e\n\u003cli\u003eIncludes PCIE Grabber Card\u003c\/li\u003e\n\u003cli\u003eComes with 4 Fiber Modules\u003c\/li\u003e\n\u003cli\u003eIncludes two 10-meter Fiber Optic Cables\u003c\/li\u003e\n\u003cli\u003eFor QHY cameras with a 2 x 10GB interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePCIE Grabber Card Kit\u003c\/h2\u003e\n\u003cp\u003eThe PCIE Grabber Card Kit enables full-speed 2x10Gbps data transfer from compatible QHY cameras using two included 10-meter fiber optic cables. This kit provides one PCIE card and four fiber modules, creating a complete high-bandwidth connection to handle the massive data rates of professional CMOS sensors without bottlenecks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUnlocking 2x10Gbps Transfer Speeds for QHY PRO Cameras\u003c\/h3\u003e\n\u003cp\u003eModern large-format CMOS sensors can produce an enormous volume of data, overwhelming standard USB connections. This QHY Fiber Grabber Card is a PCIE2.0 x8 solution designed to bypass that limitation, supporting 2x10Gbps optical communication directly between your camera and computer for reliable, high-speed image download.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA Complete 10-meter Kit for Immediate Installation\u003c\/h3\u003e\n\u003cp\u003eThis kit includes all the necessary components for establishing a fiber optic link. You receive one PCIE data grabber card, four fiber modules, and two 10-meter fiber optic cables, ensuring you can connect your compatible QHY camera right out of the box. This system is required for models with a 2 x 10GB interface, such as the QHY268PRO, QHY600PRO, QHY461, QHY411, and QHY4040PRO.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the PCIE Grabber Card Kit?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe PCIE Grabber Card Kit is designed to transfer image data from high-resolution QHY cameras to a computer at extremely high speeds. It uses a \u003cstrong\u003e2x10Gbps fiber optic connection\u003c\/strong\u003e to prevent data bottlenecks that can occur with standard interfaces, ensuring you can capture frames at the camera's maximum rate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich QHY cameras are compatible with this PCIE Grabber Card Kit?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis kit is compatible with QHY camera models that feature a \u003cstrong\u003e2 x 10GB interface\u003c\/strong\u003e. This includes professional cameras such as the QHY268PRO, QHY600PRO, QHY461, QHY411, and QHY4040PRO.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the PCIE Grabber Card Kit include everything I need to connect my camera?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is a complete kit. It includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIE Card:\u003c\/strong\u003e 1x\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Modules:\u003c\/strong\u003e 4x\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Optic Cables:\u003c\/strong\u003e 2x (10 meters each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy images are misaligned after installing the PCIE Grabber Card Kit. What should I do?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIf you experience misaligned images, the manufacturer suggests checking the physical connections. Power down the system, then carefully reseat the PCIE capture card in its slot and reconnect the fiber optic cables at both the card and camera ends to ensure a secure link.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI'm using a QHY600PRO for survey work. Will this PCIE Grabber Card Kit prevent data bottlenecks?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eAbsolutely. The QHY600PRO is one of the primary cameras this kit is designed for. The \u003cstrong\u003e2x10Gbps\u003c\/strong\u003e transfer rate is essential for downloading its large, high-resolution files quickly, making it ideal for high-cadence applications like surveys, lucky imaging, or video astronomy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use longer cables with the PCIE Grabber Card Kit for my remote observatory?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis kit includes two \u003cstrong\u003e10-meter\u003c\/strong\u003e cables. While longer fiber optic cables (up to 50 meters) are often available, please contact us to confirm availability and compatibility for your specific remote setup requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eAccessories - PCIE Kit; Compatible with models that have 2 x 10GB interface - (Incl. 1 x 090042, 4 x 090041, 2 x 030030)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Components\u003c\/td\u003e\n\u003ctd\u003ePCIE Card 1x | Fiber Module 4x | Fiber Optic 10m 2x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.qhyccd.com\/download\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942983495965,"sku":"QHY-090043","price":2352.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-PCIE-Grabber-Card-Kit-1_24c3e6e0-d4a9-4120-9e8e-c369ccef6f62.jpg?v=1789614801"},{"product_id":"qhyccd-gps-box","title":"QHYCCD GPSBOX","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eInjects high-precision GNSS timing data into your image stream\u003c\/li\u003e\n\u003cli\u003eUtilizes both GPS and Beidou satellite navigation systems\u003c\/li\u003e\n\u003cli\u003eSynchronizes internal clock to the Pulse-Per-Second (PPS) satellite signal\u003c\/li\u003e\n\u003cli\u003eFeatures a fault-tolerant design to handle temporary signal loss\u003c\/li\u003e\n\u003cli\u003eOutputs calibration data to correct for temperature-induced frequency drift\u003c\/li\u003e\n\u003cli\u003eConnects via a dedicated accessory port on compatible QHYCCD cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section-center\"\u003e\n      \u003ch2\u003eGPSBOX\u003c\/h2\u003e\n      \u003cp\u003eThe QHY GPSBOX injects ultra-precise timing data directly into the data stream of compatible QHYCCD cameras. By synchronizing its internal, high-stability oscillator with global navigation satellite systems (GNSS), it enables advanced scientific applications like asteroid occultation timing, satellite tracking, and meteor analysis where exact time stamping is non-negotiable. This module is engineered for reliability, with a robust fault-tolerance mechanism and self-calibration to ensure timing accuracy is maintained even under challenging field conditions.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eHigh-Precision GNSS Time Stamping for Scientific Imaging\u003c\/h3\u003e\n      \u003cp\u003eThe core of the GPSBOX is a GNSS module compatible with both GPS and Beidou satellite constellations, selectable via software. It captures the universal Pulse-Per-Second (PPS) timing signal broadcast by these satellites and uses it to continuously discipline a voltage-controlled crystal oscillator (VCXO). This process ensures the camera's internal clock is strictly aligned with the global time standard, embedding each frame with a timestamp of exceptional accuracy.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n    \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eRobust Signal Integrity with Fault Tolerance and Self-Calibration\u003c\/h3\u003e\n      \u003cp\u003eReal-world observing can be unpredictable, with satellite signals potentially blocked by trees or buildings. The QHY GPSBOX is designed with a perfect fault-tolerance mechanism to handle this. If the PPS signal is lost, the system temporarily relies on its internal clock and flags the data accordingly. Once the satellite signal is reacquired, the PPS signal immediately resets the timer, completely eliminating any accumulated error and restoring full timing precision without carrying over previous drift.\u003c\/p\u003e\n      \u003cp\u003eFurthermore, the GPSBOX constantly measures its own internal oscillator against the GNSS signal. It outputs this measurement data, allowing software to accurately calibrate and correct for any frequency drift caused by ambient temperature changes, ensuring consistent accuracy throughout an observing session.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"DAV-bg-light\"\u003e\n    \u003cdiv class=\"DAV-section\"\u003e\n      \u003ch3\u003eDirect Integration with QHYCCD Cameras\u003c\/h3\u003e\n      \u003cp\u003eThe GPSBOX is designed to connect directly to QHYCCD cameras that feature the required multi-pin aviation-style accessory port. This direct link allows timing data to be seamlessly merged with the imaging data from the sensor. Not all QHYCCD cameras include this port as standard.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eNative Compatibility:\u003c\/strong\u003e Check your camera's specifications to confirm it has the necessary 6-pin accessory port for out-of-the-box use.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eFactory Modification:\u003c\/strong\u003e Cameras with other port types (such as 5-pin) or no port can often be modified by QHYCCD to be compatible with the GPSBOX. Please contact the manufacturer for this service.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the main purpose of the QHY GPSBOX?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe QHY GPSBOX provides extremely accurate timing information to a compatible QHYCCD camera by synchronizing it with GPS and Beidou satellite signals. This is critical for scientific research such as timing asteroid occultations, tracking satellites, and analyzing meteor events, where knowing the exact time of an exposure is essential.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhich satellite systems does the GPSBOX use?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe QHY GPSBOX has a built-in GNSS module that can operate with pure \u003cstrong\u003eGPS\u003c\/strong\u003e, pure \u003cstrong\u003eBeidou\u003c\/strong\u003e, or in a \u003cstrong\u003eGPS\/Beidou dual-mode\u003c\/strong\u003e. The desired mode of operation can be configured through software.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eHow does the GPSBOX handle losing satellite lock during an imaging session?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eIt features a robust fault-tolerance system. If the Pulse-Per-Second (PPS) signal from the satellite is lost, the GPSBOX will switch to an internal timer and record that the data is no longer locked to the PPS signal. As soon as the satellite signal is restored, the PPS will reset the internal timer, eliminating any accumulated error and returning to full precision.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eWhich QHYCCD cameras are compatible with the GPSBOX?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe GPSBOX requires a camera with a specific \u003cstrong\u003e6-pin aviation-style accessory port\u003c\/strong\u003e for direct connection. You must check your camera's specifications to ensure it has this port. Some other models (e.g., those with a 5-pin port) can be made compatible through a factory modification performed by QHYCCD.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eI'm timing a lunar occultation of a star like Regulus. How does the GPSBOX ensure my data is accurate?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eFor an occultation of Regulus (Alpha Leonis), timing is everything. The GPSBOX uses the Pulse-Per-Second (PPS) signal from GPS satellites to strictly align your camera's clock with the global time standard. This embeds a highly accurate timestamp into every frame, allowing you to determine the exact moment of disappearance and reappearance with the precision required for scientific contribution.\u003c\/p\u003e\n  \u003c\/div\u003e\n    \u003cdiv class=\"DAV-accordion\"\u003e\n    \u003ch3 class=\"DAV-accordion-Q\"\u003eMy observatory gets very cold at night. Will temperature changes affect the timing accuracy of the GPSBOX?\u003c\/h3\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"DAV-accordion-A\"\u003e\n    \u003cp\u003eThe GPSBOX is designed to mitigate this. The internal crystal oscillator, like any electronic component, can experience slight frequency drift with temperature changes. To combat this, the GPSBOX constantly outputs a measurement of its internal clock's frequency relative to the stable GNSS signal. This allows software to apply a real-time correction, compensating for temperature effects and maintaining high accuracy.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003ctable class=\"DAV-specifications\"\u003e\n    \u003ctbody\u003e\n      \n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n  \u003cul class=\"DAV-grid\"\u003e\n    \n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.qhyccd.com\/download\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942983921949,"sku":"QHY-090038","price":420.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-GPSBOX-1_3d65e9cb-dcb9-4b8b-b138-0b993fa6c913.jpg?v=1789614822"},{"product_id":"qhyccd-pcie-card","title":"QHYCCD PCIE 2.0 x8 Grabber Card","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eEnables 2x10Gbps high-speed optical data transfer\u003c\/li\u003e\n\u003cli\u003eInstalls in a standard PCIE 2.0 x8 computer slot\u003c\/li\u003e\n\u003cli\u003eBypasses USB bottlenecks for maximum frame rates\u003c\/li\u003e\n\u003cli\u003eRequired for select QHY PRO-series cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003ePCIE 2.0 x8 Grabber Card\u003c\/h2\u003e\n\u003cp\u003eThe QHY PCIE 2.0 x8 Grabber Card is the essential data interface for achieving the highest possible frame rates with QHY's professional cameras, establishing a dedicated 2x10Gbps fiber optic communication link between your camera and computer. This card installs directly into a PCIE 2.0 x8 slot, completely bypassing the data transfer limitations of standard USB connections for uncompromised imaging acquisition.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eUnlocking Full Frame Rates with 2x10Gbps Fiber Optics\u003c\/h3\u003e\n\u003cp\u003eModern large-format CMOS sensors like those in the QHY600PRO or QHY411 generate immense amounts of data, especially during full-resolution, high-bit-depth video capture. The QHY PCIE Grabber Card is engineered specifically to handle this workload, providing two 10Gbps channels to ensure the data pipeline from the camera never becomes a bottleneck. This allows you to capture at the sensor's maximum native speed without dropped frames or compression artifacts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eNative Compatibility for QHY's 2x10Gbps PRO-Series Cameras\u003c\/h3\u003e\n\u003cp\u003eThis grabber card is the designated data transfer solution for QHY cameras equipped with a 2x10Gbps fiber optic interface. It ensures seamless, high-speed operation with professional models including the QHY268PRO, QHY600PRO, QHY461, QHY411, and QHY4040PRO. For these cameras, this card isn't an upgrade—it is the required hardware to unlock their full scientific imaging potential.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the purpose of the QHY PCIE 2.0 x8 Grabber Card?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe QHY PCIE Grabber Card is an internal computer card that receives high-speed image data from specific QHY cameras over a 2x10Gbps fiber optic connection. It is necessary to achieve the maximum possible frame rates that these high-resolution cameras can produce, bypassing the speed limitations of USB.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhich QHY cameras require this PCIE Grabber Card?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThis card is designed for QHY models that have a 2x10Gbps fiber optic interface. This includes, but is not limited to, the \u003cstrong\u003eQHY268PRO\u003c\/strong\u003e, \u003cstrong\u003eQHY600PRO\u003c\/strong\u003e, \u003cstrong\u003eQHY461\u003c\/strong\u003e, \u003cstrong\u003eQHY411\u003c\/strong\u003e, and \u003cstrong\u003eQHY4040PRO\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy can't I just use USB with my QHY600PRO to get the maximum speed?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhile the QHY600PRO has a USB port for standard operation, the sheer volume of data generated at its highest frame rates and bit depths exceeds the bandwidth of the USB interface. The 2x10Gbps fiber optic connection, enabled by this PCIE Grabber Card, is required to transfer the full, uncompromised data stream without bottlenecks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat kind of computer slot do I need for the QHY PCIE Grabber Card?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYou will need an available \u003cstrong\u003ePCIE 2.0 x8\u003c\/strong\u003e slot on your computer's motherboard. While it may work in a larger x16 slot, it requires at least an x8 electrical connection to function correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy images are misaligned when using the QHY PCIE Grabber Card. What should I do?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eIf you experience image misalignment, the first troubleshooting step is to check the physical connections. Power down the system, then carefully unseat and reconnect both the PCIE card in its motherboard slot and the optical fiber cables at both the card and camera ends to ensure a secure link.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the QHY PCIE Grabber Card work with cameras from other brands?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo, this card is specifically designed for the proprietary high-speed fiber optic interface on select QHY cameras. It is not a generic video capture card and will not work with cameras from other manufacturers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003ePCIE 2.0 x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003e2 x 10Gbps via Optical Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eQHY cameras with 2x10Gbps interface (QHY268PRO, QHY600PRO, QHY461, QHY411, QHY4040PRO, etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThis product listing is for the PCIE Grabber Card only. Please consult your camera's documentation for required cables or other accessories.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.qhyccd.com\/download\/\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942990737693,"sku":"QHY-090042","price":2100.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-PCIE-2-0-x8-Grabber-Card-1_ad682248-9884-4176-b107-aec935356d53.jpg?v=1789615017"},{"product_id":"qhyccd-fiber-module-1x","title":"QHYCCD Fiber Module for PCIE Grabber Card","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eOfficial QHY replacement fiber module\u003c\/li\u003e\n\u003cli\u003eFor use with the QHY PCIE Fiber Grabber Card\u003c\/li\u003e\n\u003cli\u003eEnables high-speed optical data transfer from camera to computer\u003c\/li\u003e\n\u003cli\u003eMaintains data integrity for professional QHY cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eFiber Module for PCIE Grabber Card\u003c\/h2\u003e\n\u003cp\u003eThis QHY Fiber Module is the official, direct-replacement component for the QHY PCIE Fiber Grabber Card system. It ensures a reliable, high-speed optical data link between your compatible QHY camera and your computer, maintaining the massive data throughput required by QHY's professional CMOS sensors. This is the same module included with the original PCIE kit, intended as a spare or replacement to prevent downtime.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eMaintain the QHY High-Speed Optical Data Link\u003c\/h3\u003e\n\u003cp\u003eThe QHY PCIE grabber card system relies on a set of these fiber modules to create the physical optical connection between the camera and the card. If a module is lost or damaged, the entire data transfer system is compromised. This individual module allows you to quickly restore the connection and get back to imaging without needing to purchase an entire new kit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eConfirmed Compatibility with QHY Professional Cameras\u003c\/h3\u003e\n\u003cp\u003eThis fiber module is designed specifically for the high-speed fiber interface found on select QHY cameras. It provides the necessary connection to transfer uncompressed data at full speed from the sensor to your acquisition PC. Compatibility is confirmed for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cameras:\u003c\/strong\u003e QHY268PRO, QHY600PRO, QHY461, QHY411, and QHY4040PRO.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the QHY Fiber Module used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe QHY Fiber Module is a small transceiver that plugs into both a compatible QHY camera and the QHY PCIE Fiber Grabber Card. It converts electrical signals to optical signals (and vice versa), enabling extremely high-speed data transfer over fiber optic cables. This is essential for handling the large files produced by professional QHY cameras.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs this the same fiber module that comes with the QHY PCIE Grabber Card kit?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes, this is the identical, manufacturer-supplied fiber module that is included in the complete QHY PCIE Grabber Card kit. It is sold individually as a direct replacement or spare part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy would I need a spare QHY Fiber Module for my QHY600PRO setup?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe fiber modules are small components that can potentially be misplaced or damaged during setup and teardown at a remote site. Having a spare on hand ensures that a lost or broken module doesn't end your imaging session prematurely. For a critical instrument like the \u003cstrong\u003eQHY600PRO\u003c\/strong\u003e, a spare module is a low-cost insurance policy against lost imaging time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes this QHY Fiber Module plug directly into my computer's motherboard?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. This module plugs into the dedicated \u003cstrong\u003eQHY PCIE Fiber Grabber Card\u003c\/strong\u003e, which is installed in a PCIE slot on your computer's motherboard. The module does not connect directly to the motherboard itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow many QHY Fiber Modules are needed for one camera connection?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eA complete, operational link between a camera and the PCIE card requires a full set of modules. The original PCIE kit ships with the correct number to connect a single camera. This product is sold as an individual module to replace any single unit from that set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIf I damage a module on my QHY411 imaging train, will this one work?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. This module is fully compatible with the \u003cstrong\u003eQHY411\u003c\/strong\u003e and its required PCIE grabber card system. It will function as a direct, drop-in replacement for any of the original modules, restoring the high-speed data connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942990967069,"sku":"QHY-090041","price":56.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-Fiber-Module-1_9bbebe4a-b367-4308-bd35-aca853673278.jpg?v=1789615025"},{"product_id":"qhyccd-level-convertor-board-kit","title":"QHYCCD Level Convertor Board Kit (for Scientific Cameras)","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eInterfaces with camera's high-speed 6-pin GPIO port\u003c\/li\u003e\n\u003cli\u003eProvides safe, buffered access to FPGA signals\u003c\/li\u003e\n\u003cli\u003eUser-configurable VCC supports logic levels from 1.8V to 5V\u003c\/li\u003e\n\u003cli\u003eConfigurable I\/O direction via DIP switches for four signals\u003c\/li\u003e\n\u003cli\u003eAvailable in 1.8V and 2.5V versions for specific QHYCCD models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eQHYCCD Level Convertor Board Kit (for Scientific Cameras)\u003c\/h2\u003e\n\u003cp\u003eThe QHYCCD Level Convertor Board Kit unlocks the high-speed 6-pin GPIO port on scientific cameras like the QHY600PRO and QHY2020. This board creates a safe, configurable interface to signals directly from the camera's FPGA, with two distinct versions for different camera models: a 1.8V board for the QHY600PRO, QHY411, QHY461, QHY268PRO, and QHY4040PRO, and a 2.5V board for the QHY2020 and QHY42PRO.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eAccess High-Speed 6-Pin GPIO Signals\u003c\/h3\u003e\n\u003cp\u003eCertain QHYCCD scientific cameras feature a 6-pin GPIO socket for direct, high-speed communication with the main FPGA, essential for custom triggering and receiving shutter measurement signals. This connection is significantly faster than the opto-coupled SMA ports. The Level Convertor Board makes this port user-friendly, utilizing four CMOS gates whose I\/O direction can be set via DIP switches to match the required signal mode.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e1.8V to 5V Level Shifting and FPGA Protection\u003c\/h3\u003e\n\u003cp\u003eDirectly connecting external equipment to the camera's FPGA risks damage from voltage mismatches. This board completely isolates the sensitive internal components. It allows you to apply a user-side VCC voltage anywhere from +1.8V to +5V, and the board converts the signals to match, ensuring compatibility with a wide range of external controllers and instruments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eCompatibility: 1.8V and 2.5V Board Versions\u003c\/h3\u003e\n\u003cp\u003eTo ensure correct voltage matching with the camera's internal logic, QHYCCD offers two versions of the board. Choosing the correct model is critical for proper function and is determined by the camera you intend to use it with.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQHYCCD-LCB-6PIN-1.8V:\u003c\/strong\u003e Required for the QHY600PRO, QHY411, QHY461, QHY268PRO, and QHY4040PRO cameras.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQHYCCD-LCB-6PIN-2.5V:\u003c\/strong\u003e Required for the QHY2020 and QHY42PRO cameras.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat is the QHYCCD Level Convertor Board used for?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe QHYCCD Level Convertor Board is designed for advanced users who need to interface external electronic equipment with their QHYCCD scientific camera's \u003cstrong\u003e6-pin GPIO port\u003c\/strong\u003e. It's used for tasks like external triggering, synchronizing multiple cameras, or receiving precise shutter timing signals for custom instrumentation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhy do I need this board instead of connecting directly to my QHY600PRO's 6-pin port?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eConnecting wires directly to the camera's GPIO port risks damaging the main FPGA with incorrect voltage levels or static discharge. The Level Convertor Board \u003cstrong\u003eprotects the camera's internal electronics\u003c\/strong\u003e by providing a buffered, isolated interface and allows you to safely convert signals from a range of external voltage levels (1.8V to 5V).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I choose between the 1.8V and 2.5V versions of the Level Convertor Board?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe correct version depends entirely on your camera model.\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the \u003cstrong\u003e1.8V version (QHYCCD-LCB-6PIN-1.8V)\u003c\/strong\u003e for the QHY600PRO, QHY411, QHY461, QHY268PRO, or QHY4040PRO.\u003c\/li\u003e\n\u003cli\u003eSelect the \u003cstrong\u003e2.5V version (QHYCCD-LCB-6PIN-2.5V)\u003c\/strong\u003e for the QHY2020 or QHY42PRO.\u003c\/li\u003e\n\u003c\/ul\u003e\nUsing the wrong board will result in improper function.\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I use the QHYCCD board to trigger my QHY268PRO from a 5V logic signal?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. You would use the \u003cstrong\u003e1.8V version\u003c\/strong\u003e of the board (model QHYCCD-LCB-6PIN-1.8V) for the QHY268PRO. By supplying +5V to the board's user-side VCC input, it will correctly interpret the 5V logic signal from your external controller and convert it to the safe 1.8V level required by the camera's FPGA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eIs the 6-pin port on my QHY411 faster than the SMA ports for getting a shutter signal?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The 6-pin GPIO port provides a direct connection to the FPGA, offering higher speed signal access compared to the two SMA ports, which use a slower opto-coupler. For applications requiring the most precise timing, using the Level Convertor Board with the 6-pin port is the preferred method.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I configure the signal direction on the Level Convertor Board?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe board features a set of \u003cstrong\u003eDIP switches\u003c\/strong\u003e that control the direction (input or output) for each of the four configurable I\/O lines. This allows you to set up the board to match the specific requirements of your application, whether you are sending a trigger signal to the camera or receiving a status signal from it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.8V Model Compatibility\u003c\/td\u003e\n\u003ctd\u003eQHY600PRO 6pin, QHY411 6pin, QHY461 6pin, QHY268PRO 6pin, QHY4040PRO 6pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5V Model Compatibility\u003c\/td\u003e\n\u003ctd\u003eQHY2020 6pin, QHY42PRO 6pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/qhyccd-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eQHYCCD Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QHYCCD","offers":[{"title":"Default Title","offer_id":52942991098141,"sku":"QHY-090036","price":84.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/QHYCCD-Level-Convertor-Board-Kit-for-Scientific-Cameras-1_aa474beb-7430-40f8-b98c-18866847e898.jpg?v=1789615033"}],"url":"https:\/\/davidastro.com\/en-us\/collections\/electronic-accessories.oembed?page=3","provider":"David Astro","version":"1.0","type":"link"}