Dovetail Plates

APM Mountingplate 330mm 3" Losmandy compatibleThe APM-MP330-3 Mountingplate is a Losmandy compatible dovetail rail with flat surface.This solidly crafted mountingplate hold even heavy telescopes without bending. Many bores and thread holes allow...

Deluxe Dovetail rail 100 mmAPM Deluxe Dovetail rails have the advantage of the stainless steel protected surface at side where the locking screw of the mount is touching the rail. Your Rail keeps unscratched . The telescope connecting screws are US...

Deluxe Dovetail rail 120 mmAPM Deluxe Dovetail rails have the advantage of the stainless steel protected surface at side where the locking screw of the mount is touching the rail. Your Rail keeps unscratched . The telescope connecting screws are US...

Deluxe Dovetail rail 150 mmAPM Deluxe Dovetail rails have the advantage of the stainless steel protected surface at side where the locking screw of the mount is touching the rail. Your Rail keeps unscratched . The telescope connecting screws are US...

Deluxe Dovetail rail 90 mmAPM Deluxe Dovetail rails have the advantage of the stainless steel protected surface at side where the locking screw of the mount is touching the rail. Your Rail keeps unscratched. The telescope connecting screws are US 1/4-20...

10/17 - Revised Version: with significantly more mounting options than the predecessor plate, which could only hold our guidescope ringsMounting plate for Baader guidescope rings size #1 & #2, length 300mm, hole diameters 3.2" (10Micron/Astro...

Adapter with M43 x 0,75 male thread to T-2 (M42 x 0,75) male thread, e.g. for Takahashi instrumentsThis connection ring allows to connect e.g. a binoviewer or a ClickLock® eyepiece holder directly at the focuser with M43 x 0,75 female thread (e.g...

Fits C8 / 9/11 "OTAs (base width 44mm) onto Vixen-GP-or Synta-EQ5 / HEQ5 / 6 or Celestron AVX / AS-GT mountsLength = 470mm, with 70mm wider contact surface for the attachment of any tube ringsFits for Vixen clamps (and their clones) and for all Celestron...

V (EQ) with centrally milled slotsLength: 120mmBase width 44mmFits Vixen, Celestron, Skywatcher and other mountsBlack Anodized

M 36.4 is standard of Vixen telescopesTelescope side external thread 36.4mmFocuser side T-2 external thread (direct T-2 photo thread for Vixen, NexStar 4, Meade etc...)Optical path length = 0.5 mmThe T2-03 adapter converts Vixen/Takahashi M36.4x1 (small)...

V-dovetail rail with radius and with holes for 8 "SC / HDLength: 345mmDrilled and includes mounting screws for Celestron 8“ SC / HDOrange anodized

V-dovetail rail with radius and with holes for 9" SC/HD and 11" SC/HDLength: 455mmDrilled and includes mounting screws for Celestron 9" SC/HD and 11" SC/HDOrange anodized

V-dovetail, 70mm diameterPairing Vixen / Synta / SkyWatcher / Celestron / Baader V - for GIRO IIMassive EQ-clamp, black anodized, Weight: 150gTo accommodate all terminal strips of Vixen GP / GPDX, Bresser, Synta, Skywatcher3D-printed ring wrench for...

Fits C8/9/11" OTAs onto Zeiss/Astro Physics clampsLength = 470mm, with 40mm wider contact surface for the attachment of any pipe clamps Suitable for Astrophysics and Zeiss clampsWeight: approx 630g

FeaturesnullCelestron 11-inch Dovetail bar (CGE)11-inch Dovetail bar (CGE)

FeaturesnullCelestron 14-inch Dovetail bar (CGE)14-inch Dovetail bar (CGE)

FeaturesnullCelestron 8-inch Dovetail bar (CGE)Please note that this product will not work with CPC 800 GPS or CPC Deluxe 800 HD telescopes without completely removing the finder scope bracket.

FeaturesnullCelestron 9.25-inch Dovetail bar (CGE)9.25-inch Dovetail bar (CGE)