{"product_id":"wanderer-astro-4-1-filtercube-2-50mm-for-rasa-11-36","title":"Wanderer Astro 4+1 FilterCube 2\"\/50mm for RASA 11\/36","description":"\u003cul class=\"DAV-feature-list\"\u003e\n\u003cli\u003eDesigned for Celestron RASA 11 and RASA 36 astrographs\u003c\/li\u003e\n\u003cli\u003eZero-obstruction 5-position motorized filter wheel\u003c\/li\u003e\n\u003cli\u003e114 mm outer diameter for zero optical obstruction on RASA 11\/36\u003c\/li\u003e\n\u003cli\u003eHolds four side-flip filters plus one fixed central Luminance filter\u003c\/li\u003e\n\u003cli\u003eSupports 2\" mounted and 50 mm unmounted filters\u003c\/li\u003e\n\u003cli\u003eAdds 60.3 mm of optical thickness to the light path\u003c\/li\u003e\n\u003cli\u003eIntegrated manual Camera Angle Adjuster (CAA) and 3-point tilt plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eFAQ\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eIn the Box\u003c\/li\u003e\n\u003cli\u003eDownloads\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section-center\"\u003e\n\u003ch2\u003eWanderer Astro 4+1 FilterCube 2\"\/50mm for RASA 11\/36\u003c\/h2\u003e\n\u003cp\u003eThe Wanderer Astro 4+1 FilterCube is a 5-position motorized \u003ca href=\"\/collections\/filter-wheels\"\u003efilter wheel\u003c\/a\u003e engineered specifically for prime-focus imaging with Celestron RASA 11 and RASA 36 \u003ca href=\"\/collections\/astrograph-telescopes\"\u003eastrographs\u003c\/a\u003e. Its 114 mm outer diameter is sized to produce zero optical obstruction, while its patented side-flip mechanism accommodates four filters plus a dedicated central L-filter within a body that adds just 60.3 mm of optical thickness. The WFC50 supports both 2\" mounted and 50 mm unmounted filters and weighs only 385 g, connecting via a single USB 2.0 Type-C cable for both power and data.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eThe FilterCube 50: Zero-Obstruction Imaging for RASA 11\/36\u003c\/h3\u003e\n\u003cp\u003eThe FilterCube 50 (WFC50) solves the primary challenge of prime-focus imaging: adding filtration without obstructing the optical path. Designed for the Celestron RASA 11 and RASA 36, it is described by Wanderer Astro as the first zero-optical-obstruction 5-slot motorized filter wheel compatible with RASA 11\/36 systems. This allows you to perform LRGB and narrowband imaging sequences without adding optical obstruction to these fast optical systems.\u003c\/p\u003e\n\u003cp\u003eBy integrating a camera angle adjuster and a \u003ca href=\"\/collections\/rotators-and-tilt-adjusters\"\u003etilt plate\u003c\/a\u003e directly into its housing, the FilterCube also consolidates multiple accessories into a single, rigid unit. This simplifies your imaging train and provides camera angle and tilt adjustment, with the filter wheel itself controlled via a single USB-C cable and an ASCOM driver.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 114 mm Diameter for Unobstructed Prime-Focus Imaging\u003c\/h3\u003e\n\u003cp\u003eThe key to the FilterCube's design is its 114 mm outer diameter. At this size the FilterCube introduces zero optical obstruction when installed on a RASA 11 or RASA 36, so it adds multi-filter capability without adding to the obstruction in the light path.\u003c\/p\u003e\n\u003cp\u003eThe FilterCube is not compatible with RASA 8 or HyperStar systems, because of the FilterCube's minimum back focus of 60.3 mm. For RASA 11 and 36 imagers, however, the WFC50 offers a complete and unobtrusive filtration solution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003ePatented 4+1 Side-Flip Filter System\u003c\/h3\u003e\n\u003cp\u003eInstead of a traditional carousel, the FilterCube uses a patented mechanism with four side-mounted filter trays that flip into the optical path. A fifth filter, typically a Luminance (L) filter, is installed in a fixed position in the center of the wheel.\u003c\/p\u003e\n\u003cp\u003eIn this \"4+1\" configuration the central L-filter can be used on its own or in combination with any of the four side-flip filters (e.g., R, G, B, Ha): a side filter flipped into the path is stacked on top of the central filter. The selection of all five positions is motorized and controlled via software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eSupport for 2\" Mounted and 50 mm Unmounted Filters\u003c\/h3\u003e\n\u003cp\u003eThe FilterCube offers the flexibility to use a mix of common filter formats. It accepts standard 2\" mounted filters and 50 mm round unmounted filters, which can be installed together in the same unit. This allows you to use filters you may already own without needing to purchase a new, dedicated set.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\" Mounted Filters:\u003c\/strong\u003e Supports filters with a standard M48x0.75 thread. The cell height (excluding threads) must be 6 mm or less, and the thread length must be 3 mm or less to ensure clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 mm Unmounted Filters:\u003c\/strong\u003e Accommodates unmounted glass with a thickness between 1.9 mm and 3.5 mm. Filters thinner than 2.5 mm require filter shims (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick Filter Cells:\u003c\/strong\u003e If you own 2\" filters with cells taller than 6 mm, which may get stuck, Wanderer Astro offers an optional Low Profile Filter Cell Replacement Kit to ensure compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003e60.3 mm Optical Thickness and Camera Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe FilterCube adds a total of 60.3 mm of optical thickness to the light path. This back focus consumption dictates which cameras are compatible with the RASA 11 and RASA 36 systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRASA 11 Compatibility:\u003c\/strong\u003e On a RASA 11, the FilterCube works directly with cameras that have a native back focus of 12.5 mm or less.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRASA 36 Compatibility:\u003c\/strong\u003e For use with a RASA 36, you will need the RASA36 adapter kit (sold separately). With this adapter, the FilterCube supports cameras with a back focus of up to 17.5 mm, such as the Moravian C1x series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe rear tilt adjuster has screw through-holes for ZWO, QHYCCD, Player One and ToupTek APS-C and full-frame cameras, so the camera bolts directly to it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eIntegrated CAA, 3-Point Tilt Adjuster, and Collimation Access\u003c\/h3\u003e\n\u003cp\u003eThe FilterCube is engineered for precise optical alignment. A manual Camera Angle Adjuster (CAA) is built into the body, allowing you to rotate your camera for framing. The rear of the unit incorporates a 3-point tilt adjuster plate, enabling you to correct sensor tilt.\u003c\/p\u003e\n\u003cp\u003eCollimating the RASA with the FilterCube installed is also straightforward. The housing features access slots designed for a hex wrench to pass through to the RASA's collimation screws. If a slot is blocked, you can either slightly rotate the entire FilterCube or remove the rear barrel and reinstall it at a 90-degree offset to gain clear access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eA 385 g Anti-Reflection Design for Maximum Rigidity\u003c\/h3\u003e\n\u003cp\u003eConstructed from aluminum alloy with partial carbon fiber components, the FilterCube weighs only 385 g. Internally, the device has undergone extensive testing to optimize its mechanical dimensions and apply anti-reflection measures, to minimize common RASA imaging issues such as ghosting, rainbow artifacts, strange halos and flat frame calibration problems.\u003c\/p\u003e\n\u003cp\u003eFor added security, the removable rear housing is secured by two set screws and two safety clips. Working alongside the set screws, the clips help eliminate the risk of equipment detachment from improperly tightened set screws.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eStep-by-Step Filter Installation and Calibration\u003c\/h3\u003e\n\u003cp\u003eInstalling filters is a precise process guided by the software. First, loosen the two set screws and remove the rear barrel. After connecting the FilterCube to a PC via the USB-C cable, use your imaging software (like N.I.N.A.) to select the specific filter slot you wish to populate. It is critical to install the central L-filter first, as space becomes limited once the side filters are in place. Use the provided M2x4 screws to secure the filter masks, as these also serve a positioning function.\u003c\/p\u003e\n\u003cp\u003eOnce all filters are installed, re-attach the rear barrel and tighten the set screws. As a final step, cycle through all five filter positions in the software (e.g., 1-2-3-4-5-1). This calibrates the filter positioning before real imaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eConnecting Cameras and the RASA Optical Tube\u003c\/h3\u003e\n\u003cp\u003eTo attach your camera, first remove the FilterCube's rear tilt adjuster. Attach the adjuster plate to the camera from the back using the appropriate screws (M2.5x10, M2.5x6, or M3x5 sets are included), then reinstall the camera and adjuster assembly onto the FilterCube. If your camera has an outer diameter smaller than 85 mm, use the included black sealing stickers to cover the unused outer screw holes and prevent light leaks.\u003c\/p\u003e\n\u003cp\u003eTo mount the entire assembly to the telescope, slide the RASA's original factory retaining ring onto the rear barrel of the FilterCube. Then, simply screw the retaining ring onto the RASA. As instructed in Celestron's RASA white paper, you must remove the RASA's clear optical window before installing the FilterCube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eWandererEmpire Software: ASCOM Control for up to 4 FilterCubes\u003c\/h3\u003e\n\u003cp\u003eThe FilterCube is controlled via the WandererEmpire software suite, which includes the ASCOM driver for use in ASCOM imaging software such as N.I.N.A. A single USB 2.0 Type-C cable provides both 0.5 A of power and data control, eliminating the need for a separate 12V \u003ca href=\"\/collections\/power-accessories\"\u003epower supply\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIn your imaging software, you can connect to the FilterCube, assign names to each filter position (e.g., \"Luminance,\" \"Ha 7nm\"), and set per-filter focus offsets. For advanced setups, the driver supports independent control of up to four FilterCubes from a single computer. This is ideal for multi-telescope arrays or sky survey projects where multiple RASAs are operated in parallel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-bg-light\"\u003e\n\u003cdiv class=\"DAV-section\"\u003e\n\u003ch3\u003eManaging Focus Shift with the Central L-Filter\u003c\/h3\u003e\n\u003cp\u003eWhen you use the central L-filter in combination with one of the four side-flip filters, the total glass thickness in the optical path increases. While this does not negatively affect image quality on a RASA, it does cause a significant focus shift. This shift is large enough to cause autofocus and plate-solving routines to fail if not accounted for.\u003c\/p\u003e\n\u003cp\u003eThe solution is to plan your sequences accordingly. In software like N.I.N.A., you can record the approximate focus position for the L-filter alone and for the combined L+\u003ca href=\"\/collections\/narrowband-filters\"\u003enarrowband filters\u003c\/a\u003e. When switching between them in an advanced sequence, insert a command to move the \u003ca href=\"\/collections\/focusers\"\u003efocuser\u003c\/a\u003e to the approximate focus position before running autofocus or plate solving. This ensures stars are detectable and the automated routines can succeed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eDoes the Wanderer FilterCube 50 work with a RASA 8 or HyperStar system?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eNo. The FilterCube 50 has a minimum optical thickness (back focus used) of \u003cstrong\u003e60.3 mm\u003c\/strong\u003e. This is too long for the back focus requirements of the RASA 8 and HyperStar systems, so it is not supported.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhat are the back focus requirements for cameras used with the FilterCube 50 on a RASA 11?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eWhen used with a Celestron RASA 11, the FilterCube 50 is compatible with cameras that have a native back focus of \u003cstrong\u003e12.5 mm or less\u003c\/strong\u003e. No additional adapters are required for these cameras.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eMy 2\" mounted filters have a cell taller than 6 mm. Can I use them with the FilterCube 50?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003ePossibly, but they may get stuck. The FilterCube 50 is designed for 2\" filter cells with a height of \u003cstrong\u003e6 mm or less\u003c\/strong\u003e (excluding threads). For filters with taller cells, Wanderer Astro offers an optional \u003cstrong\u003eLow Profile Filter Cell Replacement Kit\u003c\/strong\u003e that you can use to re-house your filter glass for a proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eI can't connect to the FilterCube 50 from my computer. What should I do?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eDownload and install the \u003cstrong\u003eUSB driver\u003c\/strong\u003e from the official Wanderer Astro website. The ASCOM driver for the filter wheel is included in the \u003cstrong\u003eWandererEmpire\u003c\/strong\u003e software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow many filters can the Wanderer FilterCube 50 hold, and what is the \"4+1\" system?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe FilterCube 50 holds a total of five filters. The \"4+1\" design refers to its unique mechanism:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 side-flip positions:\u003c\/strong\u003e These hold four filters (typically color or narrowband) in trays that flip into the optical path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 fixed central position:\u003c\/strong\u003e This holds a fifth filter, usually a Luminance filter, in a fixed position along the central axis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe central L-filter can be used on its own or in combination with any of the side-flip filters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow is the Wanderer FilterCube 50 powered and controlled?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe FilterCube 50 is powered and controlled through a single \u003cstrong\u003eUSB 2.0 Type-C\u003c\/strong\u003e port. This connection is rated at 0.5 A, and no separate 12V DC power supply is needed, simplifying cable management on your telescope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I collimate my RASA 11 with the FilterCube 50 installed?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eThe FilterCube 50 housing has built-in access slots that allow a hex wrench to pass through to reach the RASA's collimation screws. If a screw is blocked by part of the housing, you can simply loosen the RASA's retaining ring and rotate the FilterCube slightly to gain clear access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eWhen imaging with my RASA 11, do I need to remove the telescope's optical window to use the FilterCube 50?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. As instructed by Celestron in the official RASA white paper, the clear optical window at the front of the RASA must be removed before installing the FilterCube and camera assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eHow do I manage focus shift in N.I.N.A. when switching between the central L-filter and a side-flip filter like Ha?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eCombining the central L-filter with a side filter causes a significant focus shift. In N.I.N.A.'s Advanced Sequencer, you should first determine the approximate focuser position for each filter combination. Then, after a filter change, insert a command that moves the focuser to the approximate focus position before running autofocus or plate solving. This prevents autofocus from failing due to completely defocused stars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion\"\u003e\n\u003ch3 class=\"DAV-accordion-Q\"\u003eCan I control more than one Wanderer FilterCube 50 from the same imaging PC?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"DAV-accordion-A\"\u003e\n\u003cp\u003eYes. The Wanderer ASCOM driver is designed to recognize and independently control up to four FilterCube devices connected to a single computer. In software like N.I.N.A., they will appear as \"Wanderer FilterCube 1,\" \"Wanderer FilterCube 2,\" etc., and each can be configured with its own set of filters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ctable class=\"DAV-specifications\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eWFC50 (FilterCube 50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice Type\u003c\/td\u003e\n\u003ctd\u003eZero-obstruction 5-position motorized filter wheel for prime-focus telescopes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter Mechanism\u003c\/td\u003e\n\u003ctd\u003e4 side-flip positions + 1 fixed central L position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Telescopes\u003c\/td\u003e\n\u003ctd\u003eCelestron RASA 11 and RASA 36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible Telescopes\u003c\/td\u003e\n\u003ctd\u003eHyperStar and RASA 8 not supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRASA 36 Adapter\u003c\/td\u003e\n\u003ctd\u003eRequires RASA36 adapter kit (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Filters\u003c\/td\u003e\n\u003ctd\u003e2\" mounted and 50 mm unmounted filters (can be mixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\" Mounted Filter Specs\u003c\/td\u003e\n\u003ctd\u003eCell height ≤ 6 mm (excl. threads), M48x0.75 thread, thread length ≤ 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50mm Unmounted Filter Specs\u003c\/td\u003e\n\u003ctd\u003e1.9 to 3.5 mm thick (filters thinner than 2.5 mm require shims, sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptical Thickness\u003c\/td\u003e\n\u003ctd\u003e60.3 mm (back focus used)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e114 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e385 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera Back Focus (RASA 11)\u003c\/td\u003e\n\u003ctd\u003eSupports cameras with ≤ 12.5 mm back focus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera Back Focus (RASA 36)\u003c\/td\u003e\n\u003ctd\u003eSupports cameras with ≤ 17.5 mm back focus (with adapter kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in Adjustments\u003c\/td\u003e\n\u003ctd\u003eManual camera angle adjuster (CAA) and 3-point rear tilt adjuster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera Mounting\u003c\/td\u003e\n\u003ctd\u003eRear tilt adjuster with through-holes for ZWO, QHYCCD, Player One, ToupTek\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTelescope Connection\u003c\/td\u003e\n\u003ctd\u003eUses the RASA's factory retaining ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData \u0026amp; Power\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type-C, 0.5 A (no separate power supply needed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003eWandererEmpire (includes ASCOM driver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulti-Device Support\u003c\/td\u003e\n\u003ctd\u003eUp to four FilterCubes can be controlled independently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy with partial carbon fiber components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Housing Security\u003c\/td\u003e\n\u003ctd\u003eTwo set screws plus two safety clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eWanderer FilterCube 50 (WFC50)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e0.2 m USB Type-C cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e0.5 m USB Type-C cable\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eFilter masks\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eM2.5x10 countersunk screws\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eM2.5x6 countersunk screws\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eM3x5 countersunk screws\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eM2x4 cup head screws (filter mask screws)\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e1.5 mm hex key\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003e2 mm hex key\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eSealing stickers\u003c\/p\u003e\n\u003cp class=\"DAV-item-subtitle\"\u003e× 1 set\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul class=\"DAV-grid\"\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/Wanderer_Astro_Wanderer_FilterCube_50_RASA_Filter_Wheel_Manual.pdf\" target=\"_blank\"\u003e\u003csvg class=\"DAV-img-box\" viewbox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M0 64C0 28.7 28.7 0 64 0L224 0l0 128c0 17.7 14.3 32 32 32l128 0 0 144-208 0c-35.3 0-64 28.7-64 64l0 144-48 0c-35.3 0-64-28.7-64-64L0 64zm384 64l-128 0L256 0 384 128zM176 352l32 0c30.9 0 56 25.1 56 56s-25.1 56-56 56l-16 0 0 32c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-48 0-80c0-8.8 7.2-16 16-16zm32 80c13.3 0 24-10.700 24-24s-10.7-24-24-24l-16 0 0 48 16 0zm96-80l32 0c26.5 0 48 21.5 48 48l0 64c0 26.5-21.5 48-48 48l-32 0c-8.8 0-16-7.2-16-16l0-128c0-8.8 7.2-16 16-16zm32 128c8.8 0 16-7.2 16-16l0-64c0-8.8-7.2-16-16-16l-16 0 0 96 16 0zm80-112c0-8.8 7.2-16 16-16l48 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 32 32 0c8.8 0 16 7.2 16 16s-7.2 16-16 16l-32 0 0 48c0 8.8-7.2 16-16 16s-16-7.2-16-16l0-64 0-64z\" fill=\"#0047a7\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Manual\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"DAV-grid-item\"\u003e\u003ca href=\"https:\/\/www.wandererastro.com\/en\/h-col-106.html\" target=\"_blank\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewbox=\"0 0 640 512\" class=\"DAV-img-box\"\u003e\u003cpath fill=\"#0047a7\" d=\"M128 32C92.7 32 64 60.7 64 96l0 256 64 0 0-256 384 0 0 256 64 0 0-256c0-35.3-28.7-64-64-64L128 32zM19.2 384C8.6 384 0 392.6 0 403.2C0 445.6 34.4 480 76.8 480l486.4 0c42.4 0 76.8-34.4 76.8-76.8c0-10.6-8.6-19.2-19.2-19.2L19.2 384z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \n\u003cdiv\u003e\n\u003cp class=\"DAV-item-title\"\u003eDownload Software\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/davidastro.com\/pages\/wanderer-astro-warranty-policy\" rel=\"noopener\" target=\"_blank\"\u003eWanderer Astro 2-Year Warranty\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wanderer Astro","offers":[{"title":"Default Title","offer_id":67895384178973,"sku":"WA-WFC50","price":1259.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/5280\/1565\/files\/wanderer-astro-4-1-filtercube-2-50mm-for-rasa-11-36-1.jpg?v=1793212958","url":"https:\/\/davidastro.com\/products\/wanderer-astro-4-1-filtercube-2-50mm-for-rasa-11-36","provider":"David Astro","version":"1.0","type":"link"}