What is the PrimaLuceLab Eagle Power Cable with Anderson Connector used for?

This cable is designed to connect a PrimaLuceLab EAGLE control unit to an external power source, typically a portable deep-cycle battery, that uses an Anderson Powerpole connector. It allows you to power the EAGLE and all of your connected imaging equipment in the field where AC power is unavailable.

What kind of battery do I need to use with this Eagle Power Cable?

You will need a portable power source or battery that has a compatible Anderson Powerpole output connector. These are common on many batteries designed for amateur radio, remote power applications, and astrophotography field use.

Why does this PrimaLuceLab cable use an Anderson connector?

Anderson Powerpole connectors are favored for field use because they are genderless, create a secure, low-resistance connection, and are physically keyed to prevent reverse polarity. Accidentally reversing the power connection can instantly damage sensitive electronics, and this connector design eliminates that risk.

How does the screw-on connector on the Eagle Power Cable help during an imaging session at a dark site?

The threaded, screw-on connector provides a secure physical lock to the EAGLE's power input port. In the dark, it's easy to accidentally snag a cable. This connector prevents the cable from being unintentionally disconnected, which would cause a sudden shutdown of your entire imaging system and ruin an exposure.

Can I use this cable to power my EAGLE5 PRO for an all-night session imaging the Andromeda Galaxy (M31)?

Yes. As long as you connect it to a battery with sufficient capacity, this cable provides the secure connection needed to power an EAGLE5 PRO and your attached equipment for many hours. It is ideal for long, unattended imaging sequences of targets like the Andromeda Galaxy (M31) or the Orion Nebula (M42).

Does this PrimaLuceLab cable include protection for my EAGLE unit?

Yes. The cable includes an integrated inline fuse. This fuse is a critical safety feature that will blow in the event of a short circuit or an overcurrent situation, protecting the expensive electronics inside your EAGLE control unit and any connected devices from damage.

Français

English

Français

États-Unis (USD$)

Câble d'alimentation PrimaLuceLab Eagle avec connecteur Anderson avec fusible 16A - 250cm

par PrimaLuceLab

UGC PLL-PL10000AND

$59.00 - $59.00

$59.00

$59.00 - $59.00

$59.00

Égalisation de prix!

En rupture temporaire

Alerte de retour en stock

Info disponibilité

Quantité

Pour alimenter l'Eagle (qui à son tour peut alimenter tous les autres appareils connectés), vous pouvez utiliser une batterie ou une alimentation secteur. Si vous disposez déjà d'une batterie de capacité suffisante, vous pouvez vous connecter à Eagle avec ce cordon d'alimentation 12V. D'un côté il a le connecteur à vis Eagle, de l'autre il a un connecteur Anderson avec fusible 16A pour éviter l'inversion de polarité

Langue

Pays

Langue

Pays

Câble d'alimentation PrimaLuceLab Eagle avec connecteur Anderson avec fusible 16A - 250cm

Langue

Pays

Langue

Pays