Telegizmos
TeleGizmos covers are designed around a specific Canadian reality: a telescope left outdoors spends far more hours in daylight than under stars, and what damages it is ultraviolet exposure and daily condensation cycling rather than a single rainstorm. Their reflective, breathable construction addresses both. David Astro carries TeleGizmos products in Canada, in stock and shipped from our Canadian warehouse.
Sizing is to the telescope in its parked position. Tell us the tube, mount and where it lives and we will match a cover.
Filters
Telegizmos 365 Series Cover for Dobsons
365 Series Protection: Designed and warranted for continuous 24/7, 365-day outdoor exposure. Dual Material Construction: 11 oz/sq yd acrylic-coa...
View full detailsTelegizmos 365 Series Cover for Refractor on ALT/AZ or EQ Mount
5.0 / 5.0
1 Review
Designed for continuous 24/7, 365-day outdoor exposure Dual-layer design with radiant barrier liner and woven polyester outer shell Outer shell re...
View full detailsTelegizmos 365 Series Cover for SCT/Mak with Fork Mount
5.0 / 5.0
2 Reviews
365 Series: Warranted for continuous 24/7, 365-day outdoor exposure Dual Material Design: Acrylic-coated woven polyester outer cover with an inn...
View full detailsTelegizmos 365 Series Cover for SCT/Mak/RC/Newtonian on EQ Mount
5.0 / 5.0
1 Review
365 Series: Warranted for continuous 24/7, 365-day outdoor exposure Dual-Layer Design: 11 oz/sq yd woven polyester outer shell with a 6 mil inne...
View full detailsTelegizmos 365 Series Tripod Cover
Designed for continuous 24/7, 365-day outdoor exposure Available in two versions: T3TP (365 Series canvas only) and T3TP-S (dual material, with a ...
View full detailsTelegizmos Cover for Dobsonian Telescopes
Fits Dobsonians from 6" tube models to 25" truss designs Multi-layer polyethylene with a fully aluminized radiant barrier surface Waterproof mater...
View full detailsTelegizmos Cover for Newtonian on EQ mount
Fits Newtonian telescopes on German equatorial mounts Two sizes: TGN1 for 10" and 12" f/4.5 and f/5 Newtonians, TGN8 for the Meade LXD55/LXD75 SN8...
View full detailsTelegizmos Cover for Refractor on ALT/AZ or EQ Mount
Six sizes for refractors from the Coronado PST to 6" refractors, tube lengths up to 58" Multi-layer polyethylene with a fully aluminized surface R...
View full detailsTelegizmos Cover for SCT/Mak with Fork Mount
Sizes for fork-mounted SCTs and Maks, from the Meade ETX-90 and ETX-125 to the 16" SCT Solar radiant barrier material reflects sunlight to keep te...
View full detailsTelegizmos Cover for SCT/Mak/RC on EQ Mount
Fits 10"-12" SCTs and Maks (TGG1) and 14" SCTs, Maks and RCs (TGG2) on German equatorial mounts Solar radiant barrier material reflects sunlight t...
View full detailsTelegizmos Solar Observing Hood
Black opaque inner liner provides light blockage while you observe the Sun Dual layer design: TeleGizmos solar material outside, black opaque line...
View full detailsTelegizmos Tripod Cover
Fits tripods with leg spread up to 50" Accommodates leg height up to 52" Full-length Velcro closure for easy installation Solar radiant barrier ma...
View full detailsCover Construction and Long-Term Protection
A permanently mounted telescope needs a cover that solves several problems simultaneously without creating a new one.
- Reflective outer layer: Keeps daytime temperature under the cover far lower, which reduces the size of the daily temperature swing and therefore the condensation at dusk.
- UV-rated material: Built to survive years of direct sun rather than degrading and shedding within a season.
- Breathability: Allows trapped moisture to escape rather than holding humid air against the optics and mount.
- Sizing by parked configuration: Covers are matched to the telescope and mount as they sit, not to the tube's dimensions alone.
- Securing hardware: Drawcords and straps that hold the cover through wind, since a displaced cover fails exactly when weather is worst.
- Seasonal weight options: Different constructions for year-round exposure versus lighter seasonal or transport use.
Why Choose David Astro for TeleGizmos
We know what a Canadian year does to equipment left outdoors, because we deal with the results.
- Sized to the whole parked setup: We include mount head and counterweight shaft in the sizing, which is what people most often forget.
- Condensation management advice: We recommend capping optics and using desiccant under the cover, because the cover alone does not solve internal humidity.
- Winter guidance: We advise on clearing snow load and on how often to inspect through the coldest months.
- Authorized dealer: Genuine products with manufacturer warranty, in Canadian stock.
- Ships from Canada: No duties or brokerage fees for Canadian buyers.
TeleGizmos in Canada — Frequently Asked Questions
- Why does a reflective cover matter?
- It limits how hot the equipment gets during the day. The larger the temperature drop at dusk, the more condensation forms, so keeping daytime temperature down reduces the moisture cycle.
- Is a cover enough on its own?
- It handles rain, sun and snow. Internal humidity still needs managing, so cap the optics and use desiccant inside the tube for long-term outdoor storage.
- How do I size one?
- By the telescope and mount as they sit parked, including the counterweight shaft. Tell us both models and we will confirm the size.
- Will it survive a Canadian winter?
- The materials are built for extended outdoor exposure. Wet snow should be cleared rather than left to accumulate, since the weight can strain the mount.
Protecting a permanent setup?
Tell us your telescope and mount and we will size a cover. In stock and shipping from Canada.