Accessoires solaires
Solar observing has its own accessory requirements, most of them safety-related. An unfiltered finder pointed at the Sun is a hazard, a filter that can be lifted by wind is a serious risk, and etalon tuning and blocking filter handling both require the right supporting hardware. David Astro carries solar accessories in Canada, stocked in Canada and shipped worldwide.
If any part of your solar setup is improvised, tell us about it. This is the one area where we would rather over-check than assume.
Filtres
Daystar Plaque Plate Avant Quantum - 1.375"x24TPI(F)
Q3GF1F : plaque latérale dorée à l'avant pour Quantums. A des filetages femelles de 1,375" x 24 Accepte les museaux de tube de traction GM1D1 de 1...
Afficher tous les détailsDaystar Plaque Plate Avant Quantum en T
Convient aux quantiques. Possède un filetage femelle en T (M42x0,75 mm). Accepte le museau du tube de traction GM2DT 2 ".
Daystar Plaque Inclinée Avant Quantum en T
Plaque de coin avant quantique à utiliser avec les télescopes SCT (en conjonction avec ERF hors axe) et GF2SCTT ou GM2DT. Convient aux quantiques....
Afficher tous les détailsDaystar Plaque Combo Rouge Arrière pour Quantum - SCT / T
Convient aux quantiques. A un choix combiné avec filetage mâle et femelle. Q3RFCTM : Filetage femelle en T / Mâle 2" x 24 pour une utilisation ave...
Afficher tous les détailsDaystar Coulant Argenté Quark 2"/ 1.25" pour Camera Quark ou Scout
Pack de museaux argentés avant Quark 1,25" et 2", pour utiliser Camera Quark sur un télescope astronomique. Comprend un museau mâle SZ41 1,25" et ...
Afficher tous les détailsDaystar Adaptateur Quark vers C
Les imageurs vont adorer notre adaptateur Quark vers C, pour monter les caméras à filetage C directement et de manière rigide sur le Quark. Quark ...
Afficher tous les détailsDaystar Ensemble d'adaptateurs Quark vers C et Quark vers T
Les imageurs vont adorer nos adaptateurs Quark vers C et Quark vers T, pour monter les caméras à filetage C ou T directement et de manière rigide ...
Afficher tous les détailsDaystar Adaptateur Quark vers T
Les imageurs vont adorer notre adaptateur Quark vers T, pour monter les caméras à filetage T directement et de manière rigide sur le Quark. Quark ...
Afficher tous les détailsDaystar QUARK Visual Focal Reducer
Nominal Focal Reduction Factor Designed Exclusively for Daystar Quark Filters Widens the True Field of View Increases Image Brightness for Promine...
Afficher tous les détailsDaystar Adaptateur SCT à Porte-Oculaire 2" - pour Côté Arrière Rouge
Embout de tube de traction arrière, côté rouge de 2 ". A des filetages SCT femelles et un tube de traction femelle de 2"
Daystar Porte-Oculaire 1.25" - pour Côté Arrière Rouge
RF1D1 : museau de tube de traction arrière, côté rouge de 1,25 pouce A des filetages mâles de 1,375 "x 24 et un tube de traction femelle de 1,25" ...
Afficher tous les détailsDaystar Plaque de Montage Rouge pour Powermate 4X
Pour adapter le TeleVue 4X Powermate aux filtres Quantum ou ION. Rend votre train d'optique beaucoup plus court. Aucun adaptateur PMT requis. Dévi...
Afficher tous les détailsDaystar Universal Solar Finder
Safe, no-look solar alignment Projects a harmless dot of light onto a target screen Dual mounting system fits most telescopes Includes both a dove...
Afficher tous les détailsLunt Adaptateur 1.25" pour Filtre Bloquant
Permet l'utilisation d'un filtre bloquant Lunt 2″ dans un porte-oculaire 1.25″ (filtre bloquant non inclus). Aluminium anodisé noir.
Lunt Adaptateur T2 vers Porte-Oculaire 2"
Cet adaptateur de tube d'oculaire T2 à 2″ permet l'utilisation d'oculaires 2″ avec les filtres de blocage Lunt Solar Systems, les modules CaK et...
Afficher tous les détailsLunt Porte-Oculaire et Plaque de Support - LS100MT
La plaque arrière et le porte-oculaire Crayford standard pour le LS100MT vous permettent de convertir ce télescope solaire dédié en un télescope p...
Afficher tous les détailsLunt Porte-Oculaire et Plaque de Support - LS152T
La plaque arrière et le porte-oculaire Crayford standard pour le LS152MT vous permettent de convertir ce télescope solaire dédié en un télescope p...
Afficher tous les détailsLunt PC-USB Contrôleur Pression
Le contrôleur de réglage de pression permet un contrôle facile à deux boutons de n'importe quel télescope à réglage de pression fabriqué par Lunt...
Afficher tous les détailsLunt SunLock Solar Alignment Finder
Red Dot Sun Finder for safe, precise solar alignment Glass projection plane provides a clear target Internal 3-point set screw system locks alignm...
Afficher tous les détailsPlayer One Solar Fast Tilter
Fast Tilt Adjustment Eliminates Newton's Rings Simple Two-Screw Control Designed for Solar Narrowband Imaging Standard 1.25" Barrel Description...
Afficher tous les détailsSVBONY Metal Solar Finder Scope for Sun Positioning
Safely locate the Sun without direct viewing Simple pinhole projection design Durable all-metal construction Compact 68*41*32mm dimensions Lightwe...
Afficher tous les détailsTelegizmos Toile d'observation solaire
Améliorez votre expérience d'observation solaire avec la capuche d'observation solaire Telegizmos. Cette capuche innovante est conçue pour améliore...
Afficher tous les détailsTeleVue Sol-Searcher
Supporting Hardware for Solar Observing
These items make solar observation safer, easier to aim and more comfortable in daylight.
- Solar finders: Pinhole or shadow-projection finders that let you aim without looking through anything. An unfiltered optical finder pointed at the Sun is genuinely dangerous.
- Filter retention hardware: Straps and secure cells that prevent a full-aperture filter being lifted off by wind, which is a real failure mode with serious consequences.
- Blocking filters and diagonals: Eyepiece-end components for hydrogen-alpha systems, sized to the field you intend to view or image.
- Tuning aids: Adjusters and controls for etalon tuning, letting you shift between optimal disc and limb views during a session.
- Shade and observing hoods: Daylight makes screens and eyepieces hard to see. A hood or shade materially improves what you can detect.
- Aperture stops: Off-axis stops for large telescopes, reducing heat load and often improving the image in turbulent daytime seeing.
Why Choose David Astro for Solar Accessories
We check solar setups more carefully than anything else we sell, for obvious reasons.
- Safety verified rather than assumed: We confirm that filters are full-aperture and front-mounted, and that finders are capped or properly filtered.
- Retention emphasized: A filter that fits but is not secured is a hazard on a windy day, and we will recommend retention hardware with any full-aperture filter.
- Genuine components only: As an authorized dealer we supply manufacturer product, which matters in a category where counterfeits exist.
- Compatibility checked: Blocking filters and tuning hardware are system-specific, and we confirm the match before shipping.
- Ships from Canada: No duties or brokerage fees for Canadian buyers.
Solar Accessories in Canada — Frequently Asked Questions
- How do I aim at the Sun safely?
- With a solar finder that projects a shadow or a pinhole image, or by capping the finder entirely and using the telescope's own shadow to aim. Never look through an unfiltered finder.
- Does my solar filter need a strap?
- Any full-aperture filter that could be lifted by wind should be secured. A filter blown off while someone is at the eyepiece is a genuinely serious event.
- Should I stop down a large telescope for solar work?
- Often yes. An off-axis aperture stop reduces heat load and frequently improves the image, since daytime seeing rarely supports full aperture resolution.
- Can I improvise solar equipment?
- No. This is the one area where improvisation risks permanent eye injury. Tell us what you have and we will confirm whether it is safe before you use it.
Checking a solar setup?
Describe what you have and we will confirm it is safe. Genuine components, Canadian stock.