What makes the Alan Gee Universal Telecompressor (UAG II) different from other reducers?
The UAG II is the only telecompressor on the market specifically designed to work correctly for visual observation with a binoviewer. Most reducers are optimized for imaging sensors and can introduce aberrations when used visually with the long light paths of binoviewers. The UAG II, based on a Roland Christen flat-field design, corrects for field curvature in SCTs while dramatically expanding the field of view for two-eyed observing.
How does the UAG II improve binoviewing on a Celestron 8" EdgeHD telescope?
On an 8" EdgeHD or standard SCT, a binoviewer provides comfortable viewing but with a very restricted field of view. The UAG II telecompressor widens this field significantly, allowing you to see large objects in context. For example, instead of seeing just the core of the Orion Nebula (M42), you can frame the entire structure from the Trapezium out to the fainter nebulosity in a single view.
Is the focal reduction of the Alan Gee Universal Telecompressor (UAG II) a fixed value?
No, the reduction factor is variable. It depends entirely on the distance between the UAG II's optics and the eyepiece field stop (or camera sensor). A longer distance results in a stronger reduction effect and a wider field. This allows you to customize the reduction by adding or removing T-2 extension tubes in your optical train.
Can I use the Alan Gee Universal Telecompressor (UAG II) for imaging?
While its primary design is for visual use, especially with binoviewers, its flat-field optical design by Roland Christen makes it suitable for imaging. It can help flatten the field of standard SCTs and provide a wider perspective for cameras with smaller sensors. The variable reduction allows you to fine-tune your imaging scale.
What is the best way to connect the UAG II to a Baader Maxbright II Binoviewer on my SCT?
For the most rigid and compact setup, it is recommended to build a fully T-2 threaded system. A typical high-performance configuration would be:
- SCT Visual Back -> Baader T-2 Prism Diagonal -> UAG II Telecompressor -> Baader Maxbright II Binoviewer.
This creates a solid, threaded connection that prevents any flexure and ensures perfect alignment.
Do I need a 2" diagonal to use the UAG II?
Not necessarily. While the UAG II has a 2" nosepiece that can be used in any 2" diagonal, its real flexibility comes from the T-2 thread on the telescope side. This allows for direct integration into T-2 systems like the Baader T-2 Prism or FlipMirror II, bypassing the need for a larger 2" diagonal entirely.
