Passer au contenu
Égalisation des prix Retours sous 30 jours* Parlez à un astronome avant d'acheter
Shelyak Adapter cord for the SPOX module

Shelyak Adapter cord for the SPOX module

par Shelyak
UGC SHK-SE0183
CA$141.00 - CA$141.00
CA$141.00
CA$141.00 - CA$141.00
CA$141.00
Égalisation de prix!
  • Official Shelyak accessory cable
  • Connects the SPOX remote control module
  • Enables control of calibration lamps
  • Compatible with Alpy 600 and LISA spectrographs
En rupture temporaire
Alerte de retour en stock
Info disponibilité
Admissible à la livraison GRATUITE au Canada pour les commandes de plus de 500$.
  • Description
  • FAQ
  • Specifications
  • In the Box
  • Warranty

  • Adapter cord for the SPOX module

    This adapter cord is the essential link for the Shelyak SPOX remote calibration module. It provides the specific connection required to control the tungsten (flat field) and Neon/Argon (wavelength calibration) lamps on Shelyak's Alpy 600 and LISA spectrographs. This cable ensures a reliable connection for automated or manual calibration sequences managed by the SPOX controller.

    Enable Remote Calibration for Shelyak Spectrographs

    Designed as a direct complement or replacement part, this adapter cord facilitates the connection between your spectrograph's calibration unit and the SPOX control box. Without the correct cable, remote operation is impossible. This genuine Shelyak part guarantees proper fit and electronic compatibility, protecting your sensitive instruments from incorrect connections.

    • Guaranteed Compatibility: Specifically made for the SPOX ecosystem, ensuring seamless integration with Alpy 600 and LISA spectrographs.
    • Reliable Operation: Provides a secure physical and electrical connection for uninterrupted, remotely controlled calibration runs, whether manual or USB-driven.
    • Essential for Automation: A critical component for any automated observatory setup, allowing calibration lamps to be triggered via software without manual intervention.

  • What is the primary function of this Adapter cord for the SPOX module?

    This cord connects the end of the SPOX main cable (0.8 m or 5 m) to the calibration module of an Alpy 600 or LISA. Its purpose is to carry power and control signals to the lamps of the calibration module (Tungsten for flats, Neon/Argon for wavelength calibration).

    Which Shelyak spectrographs are compatible with the SPOX module and this cord?

    This adapter cord is designed for use with the SPOX module and the Alpy 600 and LISA spectrographs. The Lhires III connects to the SPOX main cable directly and does not need it.

    Is this Adapter cord for the SPOX module required for operation?

    Yes, for the Alpy 600 and LISA: if you are using the SPOX module to remotely control their calibration lamps, this cord (or the one supplied with your SPOX order) must be plugged into the end of the SPOX main cable. The Lhires III does not need it.

    Can I use a generic cable instead of this official Adapter cord for the SPOX module?

    It is strongly advised to only use the official Shelyak Instruments adapter cord. Using a generic or third-party cable may result in an improper connection, unstable operation, or potential damage to the sensitive electronics in the SPOX module or your spectrograph.

    I need to automate calibration on my Lhires III spectrograph. Is this the cord I need?

    No. On a Lhires III, the SPOX main cable plugs directly into the 4-pin socket on the side of the spectrograph, so this adapter cord is not needed. It is used only with the Alpy 600 and LISA.

    Does this cord power the SPOX module itself?

    No, this cord facilitates the connection from the SPOX module to the spectrograph's lamps. The SPOX module itself needs a separate 12V DC power supply delivering at least 1 A, plugged into its 5.5 mm DC socket.

  • Kind SPOX adapter cable for Alpy 600 and LISA
    Connector Plugs into the end of the SPOX 4-pin main cable; black (power), yellow (calibration lamp) and white (flat lamp) connectors to the Alpy calibration module; on LISA the black connector is not used

    • Complement cable SPOX

      × 1

  • Shelyak 1-Year Warranty