Pegasus Power Supply Unit 12V/1.5A - 2.1mm Plug
- 12V DC at up to 1.5A
- Provides a total power output of 18W
- 2.1 mm DC plug
- Universal 90-264V AC input for worldwide use
- Includes a 1.4m (4.6 ft) power cord
- Compact dimensions of 64 x 27 x 76 mm
The Pegasus Power Supply Unit provides 12V DC at up to 1.5A, 18W in total, for a single low-draw Pegasus Astro device. With a universal 90-264V AC input and a 1.4m cord terminating in a 2.1mm plug, this compact 64 x 27 x 76 mm unit runs one device when you are not using a powerbox.
Not every setup has a powerbox. If you run a FocusCube on a visual scope, or a SmartEye at the eyepiece, a small supply from the wall outlet is all you need, and this is the one Pegasus lists for those devices.
Pegasus lists this supply as suitable for these products:
If you run a powerbox that feeds your camera, mount and dew heaters, choose the Pegasus 12V / 10A supply instead: it is the unit Pegasus recommends in its powerbox manuals, and the 2.1 mm version (PEG-PSU-21) fits the Pocket Powerbox family.
Designed for portability, the power supply measures a compact 64 x 27 x 76 mm. Its 90-264V AC input covers mains voltages around the world. One mains adapter comes in the box, EU, US, UK or AUS type, and the cord is 1.4 m long.
Pegasus lists it as suitable for the Falcon Rotator, FocusCube, Dual Motor Focus Controller and SmartEye. It is not designed to power multiple devices or a central Powerbox.
You should choose the larger 10A power supply if you are powering any Pegasus Astro Powerbox (Pocket, Ultimate, etc.). A Powerbox distributes electricity to your entire rig (camera, mount, dew heaters), and Pegasus recommends its 12V / 10A supply for that job. This 1.5A model is only for powering a single, compatible accessory directly.
We do not recommend it. Pegasus lists this supply only for its own low-draw devices, and 18W is far below what a cooled camera or a GoTo mount draws. Use the supply your camera or mount maker recommends, or power them through a Pegasus powerbox on the 12V / 10A supply.
One mains adapter comes in the box, EU, US, UK or AUS type. It is not supplied with all four.
It has a 2.1 mm DC plug. Check the power socket of your device before connecting.
The cord is 1.4 m (about 4.6 ft). That is fine on a desk or in an observatory with an outlet near the pier. In the field, plan where the supply sits so the cable can follow the scope without pulling as the mount moves.
| Output Voltage | 12V DC |
| Output Current | 1.5 A |
| Power | 18 W |
| Input Voltage | 90-264V AC |
| DC Plug | 2.1 mm |
| Cord Length | 1.4 m |
| Dimensions | 64 x 27 x 76 mm |
| Mains Adapter | EU, US, UK or AUS (one country type provided) |
| Compatible Devices | Falcon Rotator, FocusCube, Dual Motor Focus Controller, SmartEye |
Pegasus Astro 12V / 1.5A power supply with 2.1 mm plug
× 1
Mains adapter (one country type)
× 1