-
QHYCCD 4-pin to 6-pin Cable for QHYCFW3
This QHYCCD 4-pin to 6-pin Cable is the cable that connects the 4-pin QHYCFW socket found on QHYCCD cameras to the 6-pin port on the QHYCFW3 series filter wheels. This cable ensures the correct power and data lines are matched between devices, preventing damage and ensuring reliable communication for filter changes during your imaging sequence.
Dedicated Connectivity for the QHYCFW3 Filter Wheel
The QHYCFW3 filter wheel has a 6-pin RJ11 QHYCFW socket, while QHY cameras that control a filter wheel have a 4-pin QHYCFW socket that also carries 12V power. This official QHYCCD cable bridges that gap, providing a secure and electronically correct link. Using a standard, off-the-shelf cable with a different pinout can result in equipment damage, making this specific adapter essential for integrating the QHYCFW3 into certain imaging trains.
-
What is the QHYCCD 4-pin to 6-pin cable used for?
This cable is designed specifically to connect a QHYCCD device with a 4-pin port (the 4-pin QHYCFW socket on QHYCCD cameras) to the 6-pin port on a QHYCFW3 filter wheel. It adapts the different pin configurations to ensure proper power and data communication.
Is this cable required for all cameras used with the QHYCFW3?
No. The QHYCFW3 can also be powered and controlled from a computer through its own USB port, without a camera. This 4-pin to 6-pin cable is only necessary if your specific camera or control accessory has a 4-pin output port that you need to connect to the filter wheel's 6-pin input.
Can I use a generic RJ11 or other 6-pin cable instead of this QHYCCD cable?
No. It is critical to use the official QHYCCD cable. Generic telecommunication or data cables may have the same connectors but will have a different internal wiring (pinout). Using the wrong cable can send incorrect voltage to data pins, potentially causing permanent damage to your camera or the QHYCFW3 filter wheel.
How do I know if my QHY camera needs this 4-pin to 6-pin cable for the QHYCFW3?
You need this cable if your QHY camera has a 4-pin QHYCFW socket for filter wheel control and you want to connect it to the 6-pin port on the QHYCFW3. Always check the manual for your specific camera model to confirm its filter wheel connection type.
Does this cable provide power to the QHYCFW3?
Yes, this cable is designed to transmit both power and data signals from the camera to the QHYCFW3 filter wheel, allowing the camera to control filter positions without a separate power source for the wheel, assuming the camera's port provides sufficient power.
What is the length of the QHYCCD 4-pin to 6-pin cable?
QHYCCD does not state the cable length.
-
| Kind |
Camera-to-filter-wheel control cable |
| Input power |
12V from the camera's 4-pin CFW socket |
| Connector |
4-pin (camera) to 6-pin RJ11 (QHYCFW3) |
| Control / software |
Filter wheel controlled through the QHY camera |
-
-
QHYCCD 4-pin to 6-pin Cable for QHYCFW3
× 1
- QHYCCD Warranty
