PrimaLuceLab EAGLE-compatible power cable for QSI cameras - 115cm 8A

The screw-lock connector threads directly onto the EAGLE's 12V output port, creating a secure physical connection that cannot be accidentally unplugged. This is a critical feature for remote and automated imaging, as it prevents power loss to your QSI camera due to cable snags during slewing.

A length of 115cm (approximately 45 inches) is generally sufficient for most setups, including fork-mounted SCTs where the EAGLE is mounted on the optical tube. It allows for a clean route to the camera without excessive slack. However, for exceptionally large or complex setups, you should measure your required cable path to confirm it's adequate.

No, this cable is designed specifically for QSI cameras. While the EAGLE-side connector is standard, the camera-side plug is wired and sized for the power input jack on QSI cameras. Using it with other brands may not work and could potentially damage your equipment.

You need this cable to safely and securely adapt the EAGLE's threaded 8A power output port to the standard 12V DC input jack on your QSI camera. It ensures both a physically secure connection and the correct power delivery.

It fits EAGLE units with 12V 8A screw-lock power outputs, such as ports 3 and 4 of the EAGLE5 and EAGLE6. PrimaLuceLab does not confirm older EAGLE generations.

By preventing accidental power disconnection. A standard push-in power plug can easily be knocked loose, causing your camera to shut down and ruin an exposure. The screw-on EAGLE connector on this 12V cable makes such a disconnection virtually impossible, safeguarding your imaging session.