How do I mount the Rigel Systems QuikFinder on both my 8-inch Dobsonian and my 60mm guide scope?
The QuikFinder includes two bases precisely for this purpose. Use the large base (for tubes 6 inches and over) for your 8-inch Dobsonian and the small base for your 60mm guide scope. Both attach with the included double-sided tape. The finder itself then clips on and off either base, allowing you to switch it between scopes in seconds.
What is the advantage of the QuikFinder's pulsed reticle?
The pulsed reticle blinks at an adjustable rate. This prevents the constant red light from overwhelming faint stars or deep-sky objects, which can disappear behind a continuously illuminated circle. By allowing you to see "through" the reticle, the pulsed mode makes it easier to center dim targets without losing sight of them.
Does installing the optional AA Battery Holder on the QuikFinder require soldering?
No, the optional AA Battery Holder is designed for a simple, no-solder installation. You make a 1/4 in deep notch in the side of the QuikFinder with a drill, clipper or other tool (this will not void the warranty), insert the battery clip in place of the coin cell, and attach the holder to the side with double-sided tape.
Are there any critical care instructions for the Rigel Systems QuikFinder?
Yes. The most important warning is to never let sunlight shine directly into the lens, as it will melt the reticle. Treat the window and lens as you would any other optical element, cleaning only with a soft cloth.
How do I align the QuikFinder with my telescope?
Alignment is done using the three white adjusting screws on the front of the unit. First, center a distant, stationary object (like a treetop or telephone pole) in your telescope's main eyepiece. Then, look through the QuikFinder and turn the three screws until the red circles are centered on the same object. Your finder is now aligned.
