What is the difference between the Starizona SCT Corrector LF and the SCT Corrector IV?
The SCT Corrector LF is designed for full-frame sensors on C11 and C14 SCTs, offering a 42mm image circle, 0.7x reduction, and 146mm of backfocus. The SCT Corrector IV is for APS-C or smaller sensors on a wider range of SCTs, with a 27mm image circle, 0.63x reduction, and 90.3mm of backfocus.
Can I use the Starizona SCT Corrector LF with an EdgeHD telescope?
No. Starizona designs the SCT Corrector LF for standard (non-EdgeHD) Celestron C11 and C14 telescopes.
How do I calculate the spacing for my camera with the SCT Corrector LF?
The SCT Corrector LF requires 146mm of backfocus, measured from the top of the corrector's mounting threads to your camera's sensor. You must add up the optical path length of all accessories in your imaging train (OAG, filter wheel, adapters) and use spacers to reach a total distance of 146mm.
Will the Starizona SCT Corrector LF fully illuminate my full-frame sensor on a C14?
The 42mm image circle is designed to cover a full-frame sensor. There is some remaining vignetting, limited by the telescope baffles, which are designed for a slower focal ratio. This is normal and is easily corrected by taking and applying flat calibration frames during image processing.
How do I attach my DSLR camera to the SCT Corrector LF?
You will need an adapter that threads onto the corrector's 3.29-inch rear thread and provides the correct spacing. One option is the Starizona T-Adapter with Filter Holder for EdgeHD 9.25, C11 and C14, which has a 91mm optical length. This leaves the standard 55mm spacing needed for a DSLR and its corresponding T-ring.
Is the Starizona SCT Corrector LF difficult to install?
Installation is straightforward. You simply unthread the standard visual back or adapter from your C11 or C14's 3.29-inch rear cell and thread the SCT Corrector LF directly on in its place. The more complex part is ensuring your complete imaging train meets the 146mm backfocus requirement.
What focal ratio and focal length does the SCT Corrector LF give on a C14?
On a Celestron C14 the SCT Corrector LF gives f/7.2 and a 2560mm focal length, down from the C14's native f/11.
How sharp is the SCT Corrector LF compared with the native telescope?
Spot sizes are up to 9 times smaller than the native telescope. At the edge of the field, the RMS spot size of a native C14 is 106 microns and just 13 microns with the SCT Corrector LF.
Can I attach standard large-SCT accessories behind the SCT Corrector LF?
Yes. Its rear threads are the same 3.29" threads as on the rear cell of the C11 and C14, so standard accessories attach easily.
How much length does the SCT Corrector LF add to my imaging train?
The corrector is 2.7" long overall and adds 2.3" beyond the telescope's normal mounting threads. Its maximum diameter is 3.5".