ZWO LRGB Optimized Filters
- 1.25" (31.75mm) Threaded Filter Set
- Greater than 92% Transmission at Passband
- Balanced 1:1:1 RGB Exposure Weighting
- 1/4 Wavefront Polished Optical Glass
- 700-1100nm Infrared Wavelength Cut-Off
The ZWO LRGB 1.25" Premium Filter Set delivers exceptional color fidelity and high-contrast data by ensuring over 92% light transmission across the critical passbands. Each filter is fine-optically polished to 1/4 wavefront accuracy to preserve the sharpness of your telescope's optics. The set's precise 700-1100nm infrared cut-off and approximately 1:1:1 RGB color weighting simplify both image capture and processing, yielding brilliant results with modern CMOS cameras.
This filter set captures faint signal efficiently, with each filter transmitting more than 92% of the light in its target wavelength. This high throughput reduces necessary exposure times, improving your overall signal-to-noise ratio. The coatings are engineered for an approximate 1:1:1 RGB color balance, allowing you to use similar exposure durations for each color channel and spend less time correcting color gradients in post-processing.
A filter is part of your telescope's optical train, and low-quality glass can degrade an otherwise sharp image. ZWO polishes these filters to a 1/4 wavefront standard, ensuring they do not introduce aberrations or soften star images. Paired with multiple layers of anti-reflection coatings, this optical precision maintains high contrast and protects fine details in planetary and deep-sky targets.
Modern monochrome CMOS sensors are highly sensitive to infrared light, which can cause star bloat and wash out color data if not properly blocked. This LRGB set features a sharp IR cut-off at 700nm, eliminating this issue entirely. The filters also incorporate a small spectral gap between the transmission bands, which helps to reject common sources of urban light pollution and further darken the sky background.
While ZWO's standard filters offer an excellent entry into LRGB imaging, the Premium set is a significant step up in optical design for the discerning astrophotographer.
The primary advantages are higher transmission (>92%), better color separation from superior coatings, and a carefully engineered 1:1:1 color balance. This balance simplifies processing by allowing you to use roughly equal exposure times for the Red, Green, and Blue filters, resulting in a more natural color image with less correction needed.
A 1/4 wavefront specification means the filter's surface is extremely flat and will not distort the light passing through it. This preserves the native optical quality of your telescope, ensuring that stars remain as sharp and point-like as possible. Lower quality filters can introduce optical errors, softening the final image.
Yes. While they were originally optimized for the popular ZWO ASI1600MM, their transmission curves, 1:1:1 color balance, and IR-cut features are beneficial for nearly any modern monochrome astronomy camera. They are an excellent match for sensors from Sony, Gpixel, and others.
Monochrome sensors are sensitive to infrared (IR) light, which focuses at a different point than visible light. Unfiltered IR causes bloated, soft-looking stars and reduces overall image contrast. The sharp 700-1100nm IR cut-off on these filters completely blocks this unwanted light, leading to tighter stars and more accurate color data.
This set is well-suited for imaging M31 from suburban skies. The Luminance filter will capture fine detail in the dust lanes with high transmission, while the RGB filters will gather color from the core and star-forming regions. The small spectral gaps between the filter passbands help to reject common light pollution sources, increasing the contrast between the galaxy and the skyglow.
Yes, significant vignetting is likely in that scenario. 1.25" filters are best suited for cameras with smaller sensors (like APS-C or Four Thirds format) to avoid clipping the light cone. For a full-frame sensor, especially in a fast f/5 optical system, 36mm unmounted or 2" threaded filters are strongly recommended to ensure the entire sensor is illuminated.
| SKU | ZWO-LRGB125NEW |
| Filter Type | LRGB Filter Set |
| Size | 31.75mm (1.25") |
| Format | Threaded, Round |
| Accessory Type | Filter Set |
| Warranty | ZWO 2-Year Warranty |
1.25" Luminance (UV-IR) Filter
× 1
1.25" Red Filter
× 1
1.25" Green Filter
× 1
1.25" Blue Filter
× 1