Guiding & Fiber Injection
Slit and fibre spectroscopy only works if the star stays exactly on a target a few tens of microns wide. Guiding modules use a reflective slit so a guide camera can watch the star sitting on it. Fibre injection units such as the Shelyak FIGU feed the starlight into an optical fibre that carries it to a spectrograph mounted off the telescope, which keeps heavy instruments off the focuser and the spectrograph thermally stable.
We carry the Alpy guiding module, FIGU F/6 and F/9 units, 50 µm object fibres in several lengths, 200 µm calibration fibres, fibre connector kits and eyepiece holders for guiding.
Filters
Shelyak 50µm Object Fiber - 10m
10m Fiber Length 50µm Core Diameter High-OH Fiber for UV-VIS Transmission (380-800nm) FC-type Connectors (Both Ends) <0.5dB Signal Attenuation ...
View full detailsShelyak 50µm Object Fiber - 20m
50µm Core Diameter 20 Meter Length Less than 0.5dB Attenuation 380-800nm Spectral Range FC-Type Connectors (Both Ends) Description FAQ Specific...
View full detailsShelyak 50µm Object Fiber - 5m
50µm Core Diameter Object Fiber 5m Cable Length FC Type Connectors (Both Ends) 380nm - 800nm+ Wavelength Range Numerical Aperture: 0.22 Less than ...
View full detailsShelyak Alpy Guiding Module
Essential guiding accessory for Alpy 600 & UVEX spectroscopes Ensures precise centering of the target star on the spectroscope slit Utilizes a...
View full detailsShelyak Calibration Optical Fiber - 200µm, 10m
Core Diameter: 200µm Length: 10 meters Connectors: FC-FC Numerical Aperture: 0.22 Protection: Stainless Steel Sheath Attenuation: <0.5dB ...
View full detailsShelyak Eyepiece Holder for Guiding
Enables direct visual guiding for spectrographs Accepts standard 1.25" eyepieces Replaces the need for a dedicated guide camera and software Desig...
View full detailsShelyak Fiber Optic Adapter for Alpy 600
Connects FC Standard Fiber Optics to the Alpy 600 Spectroscope Replaces the Standard 25µm Slit for Remote Light Injection Enables Bench-Mounted Se...
View full detailsShelyak Fiber Optic Connector Kit for UVEX
Adapts the Shelyak UVEX spectrograph for fiber optic input Enables physical separation of the telescope and spectrograph Ideal for permanent obser...
View full detailsShelyak FIGU F/6 – 50µm Fiber Injection and Guiding Unit
eShel Spectrograph Interface: Mounts at the telescope focus to feed starlight into the required optical fiber for Shelyak eShel and Whoppshel syst...
View full detailsShelyak FIGU F/9 – 50µm Fiber Injection & Guiding Unit
Optimized for F/9 telescope optical systems Injects starlight into a 50µm core optical fiber Integrated guiding port for precise target centering ...
View full detailsShelyak Instruments 200µm Calibration Optical Fiber - 20m
20 meter length for flexible observatory layouts 200µm core diameter optimized for calibration sources Secure FC-FC connectors for standard astron...
View full detailsChoosing Components
- FIGU F/6 or F/9: Pick the version that matches your telescope's focal ratio.
- Fibre length: Long enough to reach the spectrograph's location without stress, short enough to limit light loss.
- Guide camera: A sensitive mono camera with small pixels sees the star on the reflective slit clearly.
Setting up guiding for spectroscopy?
Tell us your spectrograph and telescope. We will list the parts.