Solar Accessories
Solar observing has its own accessory requirements, most of them safety-related. An unfiltered finder pointed at the Sun is a hazard, a filter that can be lifted by wind is a serious risk, and etalon tuning and blocking filter handling both require the right supporting hardware. David Astro carries solar accessories in Canada, stocked in Canada and shipped worldwide.
If any part of your solar setup is improvised, tell us about it. This is the one area where we would rather over-check than assume.
Filters
Baader Planetarium D-ERF Energy Rejection Filter - 290mm Aperture, 20mm Thickness
290mm Clear Aperture 20mm Thick Glass Substrate IR-Cut Dielectric Coating Pre-Filter for H-Alpha Solar Systems Description FAQ Specifications I...
View full detailsBaader Planetarium Solar / Eclipse Viewer AstroSolar® Silver/Gold
Safe for direct, naked-eye solar viewing Ideal for observing the partial phases of a solar eclipse and large sunspot groups Available as a single ...
View full detailsBaader Planetarium Solar Diaphragm 13mm - 113mm, stepless adjustable
Steplessly Adjustable Aperture: 13mm to 113mm Ideal for Optimizing Solar Views in Refractors DIY Mounting Pattern: Four M3 threads Standard Pitch ...
View full detailsBaader Planetarium Solar Projection Screen (BSPS)
Safe, Enclosed Solar Projection Ideal for Group Viewing and Public Outreach Observe Sunspots, Limb Darkening, and Eclipses Compatible with T-2 Eye...
View full detailsBaader Planetarium Solar Shade with 2" drilled hole
Blocks stray sunlight to improve contrast Reduces heat buildup around the eyepiece Installs between any 2-inch threaded accessories Features a 2-i...
View full detailsBaader Planetarium Solar Shade with M68 drilled hole
Protects Imaging Equipment from Solar Heating Clamps Securely Between Any M68 Threads Reduces Tube Currents and Thermal Instability Lightweight an...
View full detailsBaader Planetarium Solar Shade with T-2 Drilled Hole
T-2 Thread-Through Design Installs Between Any T-2 System Components Shields Equipment from Direct Solar Radiation Reduces Internal Reflections an...
View full detailsBaader Planetarium TZ-3S Telecentric System T-2 for SunDancer II and more
3x Achromatic Telecentric System Delivers a Parallel Light Beam for H-alpha Filters Illuminates a 27.5mm Image Circle 96mm Working Distance from T...
View full detailsBaader Planetarium TZ-4S Telecentric System T-2 for SunDancer II and more
Creates a parallel beam of light required for H-alpha solar filters Higher magnification factor for using solar filters on faster telescopes Maint...
View full detailsDaystar Universal Solar Finder
Safe, no-look solar alignment Projects a harmless dot of light onto a target screen Dual mounting system fits most telescopes Includes both a dove...
View full detailsExplore Scientific Solar Filter/Sun Shade for Galileoscope Refractor Telescope STEM Kit
Designed for the Galileoscope STEM Kit Enables Safe, Direct Observation of the Sun Features Durable, Tear-Resistant Solarlite Film Produces a Cons...
View full detailsiOptron 70mm Adjustable Solar Filter
70mm Clear Aperture Fits Telescope Tubes with 86mm to 106mm Outside Diameters SolarLite Film with Optical Density 5 Rating Blocks All but 1/1,000t...
View full detailsLunt SunLock Solar Alignment Finder
Red Dot Sun Finder for safe, precise solar alignment Glass projection plane provides a clear target Internal 3-point set screw system locks alignm...
View full detailsPlayer One ERF Filter S-series for Quark Chromosphere
Available in 1.25" and 2" filter sizes Energy Rejection Filter (ERF) for Quark Chromosphere Designed for refractors up to 5" (1.25" version) or 6"...
View full detailsPlayer One Photosphere 7.5nm Filter E-series - 1.25"
Enhances Solar Photosphere Contrast Central Wavelength: 540nm Bandpass: 7.5nm Narrowband Format: 1.25" Mounted Filter Must Be Used With a Primary ...
View full detailsPlayer One Solar Fast Tilter
Fast Tilt Adjustment Eliminates Newton's Rings Simple Two-Screw Control Designed for Solar Narrowband Imaging Standard 1.25" Barrel Description...
View full detailsSky-Watcher Heliostar 100Ha Solar Telescope
100mm Primary Aperture Natively < 0.55Å Bandpass 760mm Focal Length (f/7.6) 20mm H-alpha Blocking Filter Dual-Speed 2" Crayford Focuser Include...
View full detailsSVBONY SV229 Solar Eclipse Telescope Filter with Metal Cap
Certified safe for direct solar viewing to standard ISO 12312-2:2015 Fits optical tubes with an outer diameter from 80mm to 118mm Features a 103mm...
View full detailsSupporting Hardware for Solar Observing
These items make solar observation safer, easier to aim and more comfortable in daylight.
- Solar finders: Pinhole or shadow-projection finders that let you aim without looking through anything. An unfiltered optical finder pointed at the Sun is genuinely dangerous.
- Filter retention hardware: Straps and secure cells that prevent a full-aperture filter being lifted off by wind, which is a real failure mode with serious consequences.
- Blocking filters and diagonals: Eyepiece-end components for hydrogen-alpha systems, sized to the field you intend to view or image.
- Tuning aids: Adjusters and controls for etalon tuning, letting you shift between optimal disc and limb views during a session.
- Shade and observing hoods: Daylight makes screens and eyepieces hard to see. A hood or shade materially improves what you can detect.
- Aperture stops: Off-axis stops for large telescopes, reducing heat load and often improving the image in turbulent daytime seeing.
Why Choose David Astro for Solar Accessories
We check solar setups more carefully than anything else we sell, for obvious reasons.
- Safety verified rather than assumed: We confirm that filters are full-aperture and front-mounted, and that finders are capped or properly filtered.
- Retention emphasized: A filter that fits but is not secured is a hazard on a windy day, and we will recommend retention hardware with any full-aperture filter.
- Genuine components only: As an authorized dealer we supply manufacturer product, which matters in a category where counterfeits exist.
- Compatibility checked: Blocking filters and tuning hardware are system-specific, and we confirm the match before shipping.
- Ships from Canada: No duties or brokerage fees for Canadian buyers.
Solar Accessories in Canada — Frequently Asked Questions
- How do I aim at the Sun safely?
- With a solar finder that projects a shadow or a pinhole image, or by capping the finder entirely and using the telescope's own shadow to aim. Never look through an unfiltered finder.
- Does my solar filter need a strap?
- Any full-aperture filter that could be lifted by wind should be secured. A filter blown off while someone is at the eyepiece is a genuinely serious event.
- Should I stop down a large telescope for solar work?
- Often yes. An off-axis aperture stop reduces heat load and frequently improves the image, since daytime seeing rarely supports full aperture resolution.
- Can I improvise solar equipment?
- No. This is the one area where improvisation risks permanent eye injury. Tell us what you have and we will confirm whether it is safe before you use it.
Checking a solar setup?
Describe what you have and we will confirm it is safe. Genuine components, Canadian stock.