-
Antlia 7nm Narrowband H-alpha Prime Filter
The Antlia 7nm Narrowband H-alpha Prime Filter isolates the critical 656.3nm wavelength with a 7nm FWHM bandpass, achieving over 90% peak transmission for maximum signal. By also passing the adjacent NII emission lines at 654.8nm and 658.3nm, this filter is effective for deep-sky objects that contain H-alpha and NII emissions. Its OD4 blocking across the 300-1000nm spectrum delivers an excellent signal-to-noise ratio, and it can be used with nearly all systems as fast as f/2 with minimal loss in emission signal.
7nm FWHM: Capturing H-alpha and NII at >90% Transmission
The 7nm bandpass strikes a critical balance between contrast and signal strength. The 7nm Prime filters deliver superior SNR and better contrast, and the bandpass is wide enough to pass not only the primary H-alpha line at 656.3nm but also the nearby Nitrogen-II (NII) lines at 654.8nm and 658.3nm. With peak transmission above 90%, it suits its intended targets: H-alpha and NII emission nebulae, planetary nebulae, Wolf-Rayet nebulae such as the Crescent Nebula (NGC 6888), and supernova remnants.
OD4 Blocking and Lambda/4 Optics for High-Contrast Results
Signal purity is defined by what a filter rejects. The H-alpha Prime filter provides OD4 blocking from 300nm to 1000nm, blocking more than 99.99% of out-of-band light, which delivers an excellent SNR and minimizes interference from other wavelengths. The filter is built on a single, non-glued optical substrate with a Lambda/4 or better transmitted wavefront and parallelism under 30 arcseconds, and its steep spectral profile minimizes halos around bright stars.
Engineered for Modern Systems Down to f/2
Fast optical systems present a challenge for narrowband filters due to the steep light cone, which can cause band-shifting and signal loss. With their wider FWHM, 7nm Prime filters can be used with nearly all systems as fast as f/2 with minimal loss in emission signal.
Antlia 7nm Prime vs. 3nm Pro: Choosing the Right Bandpass
The choice between a 7nm and a 3nm filter depends on your equipment and sky conditions. The 7nm Prime suits very fast optical systems, down to f/2, and imagers who want to capture both H-alpha and NII data simultaneously.
-
Choose the 7nm Prime for: Faster signal acquisition, use with systems as fast as f/2, and capturing combined H-alpha and NII detail.
-
Consider a 3nm Pro for: Maximizing contrast in light-polluted areas or extending imaging time when the moon is up. The 3nm Pro series is rated as usable down to f/3.
-
How does the Antlia 7nm H-alpha Prime filter perform on an f/2 system?
With their wider FWHM, 7nm Prime filters can be used with nearly all systems as fast as f/2 with minimal loss in emission signal.
Is the Antlia 7nm H-alpha Prime suitable for the Eagle Nebula (M16)?
Yes. The 7nm FWHM is wide enough to transmit the H-alpha line at 656.3nm as well as the important NII emission lines at 654.8nm and 658.3nm. The Eagle Nebula is an H-alpha emission nebula, one of the target types this filter is designed for.
Why is it important that the Antlia 7nm H-alpha Prime filter also passes NII emission lines?
Targets include H-alpha and NII emission nebulae, planetary nebulae, Wolf-Rayet nebulae and supernova remnants. The Antlia 7nm H-alpha Prime FWHM is wide enough to pass both the H-alpha line and the NII lines at 654.8nm and 658.3nm, so it records the combined signal from these objects.
When should I choose the Antlia 7nm Prime over a 3nm filter?
Choose the Antlia 7nm Prime filter if you are using a very fast optical system (it is rated for systems as fast as f/2) or want to gather signal more quickly. A 3nm filter offers higher contrast from its narrower bandpass, at the cost of longer exposures; the 3nm Pro series is rated as usable down to f/3.
Can I use the Antlia 7nm H-alpha Prime filter for visual observing?
No. Night visual observation is not recommended for this filter. It is designed for astrophotography of deep-sky objects that contain H-alpha and NII emissions.
How does the Antlia 7nm H-alpha Prime filter minimize halos around bright stars?
Antlia attributes this to three points on the Antlia 7nm H-alpha Prime: a steep spectral profile that minimizes halos around bright stars, a single, non-glued substrate to eliminate internal reflections, and edge blackening of unmounted filters to eliminate internal reflections from stray light.
-
| Filter Type |
H-alpha narrowband (7nm Prime series) |
| Central Wavelength (CWL) |
656.3nm |
| Bandpass (FWHM) |
7nm |
| Peak Transmission |
>90% |
| Additional Lines Passed |
NII at 654.8nm and 658.3nm |
| Blocking |
>OD4 (0.01%) @ 300-1000nm |
| Recommended F-Ratio |
Usable with systems as fast as f/2 with minimal loss of signal |
| Transmitted Wavefront |
Lambda/4 or better |
| Parallelism |
< 30 arcseconds |
| Substrate |
Optical, single / non-glued substrate |
| Surface Quality |
60/40 (scratch/dig) per MIL-O-13830 |
| Filter Thickness |
2mm +/-0.05mm (36mm unmounted) |
| Edge Treatment |
Unmounted filters are edge blackened |
| Available Sizes |
36mm Round Unmounted |
| Not Recommended For |
Solar imaging, night visual observation |
| Warranty |
3-years against delamination |
-
This product is covered by the Antlia 3-Year Warranty against delamination.