Pegasus Cigarette Lighter Adapter
- Powers Pegasus Astro devices from a 12V cigarette lighter socket
- Available in DC 2.1 mm, DC 2.5 mm, and XT60 versions
- 10 A fuse built into each cable
- Cable length of 1.8 m (6 ft)
The Pegasus Cigarette Lighter Adapter is a 1.8 m (6 ft) cable designed to power your Pegasus Astro devices from a standard 12V car or portable battery socket. Each cable has a 10 A fuse, and it comes in three versions, DC 2.1 mm, DC 2.5 mm and XT60, to match the power input of your device.
For imaging in the field, a reliable power source is essential. This adapter cable provides a direct, secure connection between your Pegasus Astro powerbox or focus controller and the most common type of 12V DC output available on portable power packs and vehicle batteries. Plug it in and your powerbox or controller runs from the battery.
Pegasus devices use different power input connectors, so choose the version that matches yours. Please verify your device against the compatibility list below.
Note: A separate GX12 version (PEG-CIGLIGHT-ADAPTERGX12) is available for powering Pegasus NYX mounts and compatible Sky-Watcher mounts.
Each cable has a 10 A fuse, which protects the cable and your gear if something downstream shorts or draws too much.
At 1.8 m (6 ft), the cable lets the battery sit on the ground away from the tripod legs. Mind the input limits of your controller: the Ultimate Powerbox v3, Pocket Powerbox Advance and DewMaster2 manuals all say never to exceed 15.0V DC input. For a mobile power source, the Ultimate Powerbox v3 manual recommends a 12 to 14V LiFePO4 battery.
You need the XT60 version (PEG-CIGLIGHT-ADAPTERXT60). Pegasus lists it for the Ultimate Powerbox v2 and v3, which take power through an XT60 socket.
No, these adapters are designed for Pegasus Astro powerboxes and focusers. For a telescope mount like the Sky-Watcher EQ6-R Pro, you need the separate Pegasus Cigarette Lighter Adapter to GX12 (PEG-CIGLIGHT-ADAPTERGX12), which is sold separately.
The fuse limits the current the cable can carry to 10 A. If there is a short or an overload, the fuse blows and cuts power before the cable or your equipment is harmed.
No. The Pocket Powerbox Advance manual says never to exceed 15.0V DC input, as you might cause severe damage to the electronic board. Pegasus recommends a 13.8V lead (or calcium/lead) or a 12.8V LiFePO4 battery for it.
It is 1.8 m (6 ft) long, enough to keep the battery on the ground near the tripod or pier.
| Type | Car cigarette lighter to DC power cable |
| Available Versions | DC 2.1 mm (PEG-CIGLIGHT-ADAPTER21), DC 2.5 mm (PEG-CIGLIGHT-ADAPTER25), XT60 (PEG-CIGLIGHT-ADAPTERXT60) |
| DC 2.1mm Compatibility | Pocket Powerbox, Pocket Powerbox Micro, Pocket Powerbox Advance, FocusCube v1/v2, Prodigy Microfocuser |
| DC 2.5mm Compatibility | Ultimate Powerbox v1, DewMaster |
| XT60 Compatibility | Ultimate Powerbox v2 and v3 |
| Fuse | 10 A |
| Cable Length | 1.8 m / 6 ft |
Cigarette lighter adapter cable with the chosen plug (1.8 m)
× 1