Will this PrimaLuceLab dew heater fit my 102mm refractor?
Yes. The heater is designed with an elastic section that allows it to securely fit telescope tubes with diameters ranging from 100mm to 120mm, making it a perfect fit for 102mm (4-inch) refractors.
How do I power the PrimaLuceLab 100mm dew heater if I don't have an EAGLE?
You can power this dew heater with any standard 12V DC power source that has an RCA-style output port. This includes most third-party standalone dew heater controllers and many astronomy-specific power distribution boxes.
What is the power consumption of this PrimaLuceLab dew heater?
The heater has a low power draw of just 500mA (0.5A). This efficient design minimizes the load on your field power supply, allowing for longer observing or imaging sessions before needing to recharge.
On a humid night, is this heater enough for my Celestron C5 SCT?
A Celestron C5 has a tube diameter of approximately 150mm, which is outside the 100mm-120mm range of this specific heater. While it might work, it would not provide the full, even coverage needed to reliably prevent dew on the corrector plate. You would need a larger dew heater designed for 5-inch or 6-inch telescopes for optimal results.
How does the Velcro on the PrimaLuceLab dew heater ensure good contact?
The heater band uses a strong Velcro closure that allows you to pull it snug against the optical tube. The integrated elastic section provides constant tension, ensuring the heating element inside the band maintains direct, uniform contact with the telescope body for efficient heat transfer.
Can I control the heat output of this PrimaLuceLab heater?
This dew heater does not have a built-in controller. The heat output is managed by the device it's connected to. When plugged into a PrimaLuceLab EAGLE, you can use the EAGLE Manager software to control power. If connected to a standard dew controller, you would use that controller's knobs or settings to adjust the heat level.