-
PrimaLuceLab Eagle-compatible Power Cable with 5.5 - 2.1 Connector - 115cm for 3A port
The PrimaLuceLab Eagle-compatible Power Cable provides a secure connection from your EAGLE control unit to a wide range of popular telescope mounts. Its screw-on connector is engineered to prevent accidental power loss during an imaging session, ensuring your mount remains powered and tracking reliably through the night.
Secure Power for SkyWatcher, Celestron, and Losmandy Mounts
This cable is the essential link between your PrimaLuceLab EAGLE and your telescope mount. The EAGLE-side connector threads securely onto the unit's 3A power output port, eliminating the risk of a loose connection pulling free and ruining a sub-exposure. It is designed with a standard barrel connector and positive tip polarity to power a variety of common mounts.
-
SkyWatcher Compatibility: Powers EQ6, HEQ5, and EQ5 series mounts.
-
Celestron Compatibility: Powers Advanced VX (AVX) and CGEM mounts.
-
Broad Application: Also compatible with Avalon-Instruments and Losmandy mounts that use a standard power connector.
-
Which PrimaLuceLab EAGLE port should I use with this power cable?
This cable is designed to connect to one of the 3A power output ports on your EAGLE unit. The connector is threaded to screw securely onto the port, preventing it from being accidentally pulled out.
Will this PrimaLuceLab power cable work with my SkyWatcher EQ6-R Pro mount?
This cable is made for the SkyWatcher EQ6, HEQ5 and EQ5 mounts. For an EQ6-R Pro, check that its power jack is 5.5mm outer / 2.1mm inner with positive tip and that its current draw stays within the 3A port.
What prevents this PrimaLuceLab power cable from accidentally disconnecting?
The cable features a threaded, screw-on connector on the end that attaches to the EAGLE. This mechanical connection is far more secure than a standard push-in plug and is essential for preventing power interruptions during an imaging run.
Can I use this cable to power my Celestron NexStar 8SE from an EAGLE?
PrimaLuceLab does not list the NexStar 8SE. The cable fits devices with a 5.5mm outer / 2.1mm inner, positive tip 12V power jack, so check your telescope's power input and current draw against these figures before connecting it.
What is the polarity of this PrimaLuceLab Eagle-compatible power cable?
This cable has a positive tip polarity. This is the standard convention for the vast majority of astronomical equipment, including the mounts this cable is designed to power.
Is this PrimaLuceLab cable long enough for a typical imaging setup?
Yes. The cable is designed with sufficient length for typical piggyback configurations where the EAGLE is mounted on the optical tube assembly, allowing it to easily reach the mount's power input port without causing cable snag.
-
| EAN Code |
8059020772833 |
| Connector |
EAGLE screw connector / 5.5 x 2.1 mm, positive tip |
| Cable length |
1.15 m |
| Max current |
3 A (EAGLE 3A port) |
-
-
PrimaLuceLab Eagle-compatible Power Cable
× 1
- PrimaLuceLab 1-Year Warranty
