Skip to content
PrimaLuceLab PLUS 30mm Spacers

PrimaLuceLab PLUS 30mm Spacers

by PrimaLuceLab
SKU PLL-PLLSPES30
CA$63.00 - CA$63.00
CA$63.00
CA$63.00 - CA$63.00
CA$63.00
Price Match Policy!
  • Creates a rigid 30mm standoff between components
  • Prevents interference between main scope, guide scope, and accessories
  • Maintains PLUS system compatibility with Vixen (20mm) and Losmandy (55mm) hole patterns
  • Precision-machined for a secure, no-flex connection
  • Includes four extended 45mm M6 mounting screws
1 in stock
Qualifies for FREE Shipping in Canada on orders over $500.
  • Description
  • FAQ
  • Specifications
  • In the Box
  • Warranty

  • PrimaLuceLab PLUS 30mm Spacers

    The PrimaLuceLab PLUS 30mm Spacers are a dedicated solution for creating clearance in complex astrophotography rigs. Machined with dedicated hole patterns for both PLUS Vixen (20mm separation) and Losmandy (55mm separation) dovetails, each spacer maintains system integrity while the included four extended M6 screws (45mm length) ensure immediate installation.

    Add 30mm of Critical Clearance to Your PLUS System

    When mounting a guide scope in parallel with your main telescope, or adding accessories like a focuser motor, components can interfere with each other or the mount itself. The PLUS 30mm Spacers create a fixed 30mm standoff, providing the necessary clearance to prevent collisions and allow for more flexible equipment configurations.

    20mm & 55mm Hole Patterns for Universal PLUS Mounting

    These spacers are not simple blocks; they fully integrate into the PrimaLuceLab PLUS ecosystem. With a hole separation of 20mm for Vixen-style plates and guide rings, and a 55mm separation for Losmandy-style plates, you can insert them into your setup without losing the rigid, standardized connection. The kit includes four 45mm M6 screws, which are the correct length to pass through the spacer and securely fasten your equipment.

  • Why would I need the PrimaLuceLab PLUS 30mm Spacers?

    You need the PrimaLuceLab PLUS 30mm Spacers if components in your imaging train are too close together. This often happens when a guide scope, camera, or focuser motor physically touches the main telescope, mounting rings, or the mount itself. These spacers lift one of the components by 30mm to create essential clearance.

    Are the PrimaLuceLab PLUS 30mm Spacers compatible with both Vixen and Losmandy plates?

    Yes. The PLUS 30mm Spacers are designed with the standard PrimaLuceLab PLUS hole patterns. They feature a 20mm hole separation for connecting to PLUS Vixen dovetail bars and guide rings, and a 55mm hole separation for connecting to PLUS Losmandy dovetail bars.

    Do the PrimaLuceLab PLUS 30mm Spacers come with the necessary screws?

    Yes, the package includes four extended M6 screws. At 45mm in length, they are designed to pass through the 30mm spacer and securely thread into the connecting PLUS component, such as a dovetail plate or support ring.

    My guide scope camera hits my main OTA's focuser. Will the PrimaLuceLab PLUS 30mm Spacers fix this?

    This is the exact problem the PrimaLuceLab PLUS 30mm Spacers are designed to solve. By placing the spacers between your guide scope rings and the top dovetail plate, you will raise the entire guide scope assembly by 30mm, which is typically more than enough to clear a focuser knob or camera body.

    I'm mounting an EAGLE computer on my 125mm PLUS rings, but it's too close to the telescope's handle. Can the PLUS 30mm Spacers help?

    Absolutely. You can install the PLUS 30mm Spacers between your 125mm PLUS rings and the dovetail bar that the EAGLE is attached to. This will create a 30mm gap, providing ample room for the EAGLE and its cables to clear the telescope's handle or other hardware.

    How many PrimaLuceLab PLUS 30mm Spacers do I need for a pair of tube rings?

    You will need two PLUS 30mm Spacers to properly support a telescope or guide scope via a pair of tube rings. This ensures the instrument is raised evenly and remains parallel to the main optical axis.

  • Spacer Height 30mm
    Vixen-PLUS Hole Spacing 20mm
    Losmandy-PLUS Hole Spacing 55mm
    Mounting Hardware M6 Thread
    EAN Code 8059020772185
  • PrimaLuceLab 1-Year Warranty