Skip to content
Software Bisque Paramount ME II Power Supply (220W)

Software Bisque Paramount ME II Power Supply (220W)

by Software Bisque
SKU SB10257
Sold out
CA$500.00 - CA$500.00
CA$500.00
CA$500.00 - CA$500.00
CA$500.00
Price Match Policy!
  • 220W Power Output
  • Enables 10°/Second Maximum Slew Rates
  • Required for Paramount ME II and Taurus 400 Mounts
  • Upgrade for Paramount MYT, MX, and MX+ Mounts
  • For MKS 5000 Control Systems Only
Out of stock
FREE Shipping in Canada
  • Description
  • FAQ
  • Specifications
  • In the Box
  • Warranty

  • Software Bisque Paramount ME II Power Supply (220W)

    This official Software Bisque 220W power supply unit (PSU) is the key to unlocking the full slewing capability of MKS 5000-based Paramount mounts. Weighing 5 lbs and measuring 12 × 5 × 4 inches, it provides the necessary current to drive the motors at their maximum rated speed of 10 degrees per second, an essential upgrade for imagers looking to minimize time between targets.

    Unlock 10°/Second Slew Rates on MKS 5000 Mounts

    While the standard 90W power supply included with the Paramount MYT classic, MX classic, and MX+ is sufficient for tracking and normal slewing, it cannot deliver the peak amperage required for the highest slew speeds. This 220W PSU provides that extra power, enabling the mount's motors to reach their top speed of 10 degrees per second on both axes.

    For automated imaging runs, robotic observatories, or simply moving quickly across the sky, this upgrade significantly reduces slew time. It is the same power supply that ships standard with the larger Paramount ME II and Paramount Taurus 400 mounts, which are designed for this level of high-speed operation out of the box.

    MKS 5000 Compatibility: A Critical Checklist

    This power supply is engineered specifically for Paramount mounts running the MKS 5000 control system. It is critical to confirm your mount's compatibility before purchase to avoid damage to your equipment.

    • Compatible Mounts: Paramount MYT classic, Paramount MX classic, Paramount MX+, Paramount ME classic, Paramount ME II, and Paramount Taurus 400.
    • Incompatible Mounts: This 220W PSU is NOT compatible with any Paramount Series 6 mounts or any older mount that has been upgraded to the MKS 6000 control system. Using this PSU with an MKS 6000 system can cause irreversible damage.

    220W PSU vs. the Standard 90W Power Supply

    The choice between the 90W and 220W power supplies comes down to your demand for speed. The 90W unit is a capable, lighter-weight option for portable setups where maximum slew rate is not the primary concern. The 220W unit is built for permanent installations and demanding applications where every second of pointing time counts.

    • 90W PSU: Standard with MYT classic, MX classic, MX+. Enables all tracking and guiding functions with moderate slew speeds.
    • 220W PSU: Standard with ME II, Taurus 400. Required to achieve the maximum 10°/second slew rate on all compatible MKS 5000 mounts.

  • Do I need the 220W power supply for my Paramount MYT classic?

    You do not need it for basic operation, as the Paramount MYT classic ships with a 90W PSU that is sufficient for tracking and normal slewing. However, if you want to achieve the mount's absolute maximum slew speed of 10 degrees per second, you must upgrade to this 220W power supply.

    Will this 220W PSU work with my new Paramount Series 6 mount?

    No, it will not. This power supply is strictly for mounts using the MKS 5000 control system. Paramount Series 6 mounts use the newer MKS 6000 control system and require a different power supply. Using this PSU with a Series 6 mount can damage the electronics.

    What is the benefit of upgrading the Paramount MX+ to the 220W PSU?

    The primary benefit is speed. Upgrading from the stock 90W PSU allows the Paramount MX+ to reach its maximum slew rate of 10 degrees per second. This is ideal for automated imaging routines or quickly moving between different targets during a visual observing session.

    My Paramount ME II power supply was damaged. Is this the correct 220W replacement?

    Yes. The 220W Power Supply is the standard, original equipment manufacturer (OEM) unit that is included with all new Paramount ME II mounts. This is the correct and official replacement.

    I have a Paramount MX+ and want to image multiple targets per night. How does the 220W PSU help?

    For multi-target imaging plans, minimizing time between exposures is key. The 220W PSU allows your Paramount MX+ to slew at up to 10 degrees per second, drastically cutting down the time your mount spends moving from one object, like the Andromeda Galaxy (M31), to the next, like the Triangulum Galaxy (M33). This can add up to significant extra imaging time over a long night.

    Is the 220W power supply included with the Paramount Taurus 400?

    Yes, this 220W power supply is the standard unit included with the Paramount Taurus 400 mount. You would only need to purchase this separately if you need a replacement for the original.

  • Power Output 220W
    Control System Compatibility MKS 5000
    Max Slew Rate Enabled 10 degrees per second
    Weight 5 lbs
    Dimensions 12 × 5 × 4 in

    • Paramount 220W Power Supply Unit

      × 1

  • Software Bisque 2-Year Warranty