How do I know if the 11.5A TheSky Fusion PSU is enough for my equipment?
To confirm, check the manufacturer's specifications for every 12V DC device you will connect to TheSky Fusion. Add up the maximum amperage (A) or wattage (W) for each component. If the total is less than 11.5A (or 138W), this power supply is sufficient for your needs.
Can I use this 11.5A PSU to power a Paramount mount, a cooled CMOS camera, and a dew strip?
Not the mount. Paramount mounts require 48V DC and cannot be powered from TheSky Fusion's power output ports, so they keep their own power supply. The camera and dew strip can run through TheSky Fusion: for example, a 12V DC camera (5A max) and a dew heater (3A max) total 8A, which is well within the capacity of this 11.5A unit.
What happens if my equipment tries to draw more than 11.5A from this Software Bisque PSU?
Exceeding the 11.5A maximum rating will likely cause the power supply's internal protection circuits to shut down to prevent damage. This will cut power to your entire imaging system. It is critical to calculate your power budget accurately and choose the 21A model if your needs are close to or exceed 11.5A.
My setup with a large sensor camera and multiple dew heaters on a Paramount ME II needs more power. What are my options?
For high-demand systems, you should select the 21A model PSU. It provides up to 252W of power for large-format cameras, extensive dew control systems and other 12V DC devices. The Paramount ME II itself runs from its own 48V DC power supply, not from TheSky Fusion. Always size your power supply to have at least 15-20% more capacity than your calculated maximum load.
What are the physical dimensions of the TheSky Fusion 11.5A PSU?
Software Bisque does not state the unit's own dimensions or weight; the 8 × 12 × 2 in and 2 lbs on its listing are shipping figures.
Is this Software Bisque 11.5A PSU compatible with hardware from other brands?
This power supply is specifically designed as the power source for TheSky Fusion controller. While it outputs standard 12V DC, it is intended to power devices that are connected through TheSky Fusion's integrated power ports. It is not designed as a general-purpose standalone 12V DC power supply.
