ZWO ASI224MC Color
Description
Free Shipping on most orders above $500*
Free Shipping on most orders above $500*
ASI224MC has a 1/3″ and 1.2M pixels sensor IMX224 with SONY Exmor and NIR Technology. Extremely low read noise (1.5 e) and high sensitivity especially in IR range. Read Noise of ASI224 less than 1e which can compare with sCMOS or EMCCD sensors. Very suitable for astronomy planetary and small DSO imaging.
Relative QE Curve, we estimate the Peak Value should between 75%-80%.
Most sensor will have amp-glow problem only if you do long-time exposure capture, such as longer than 1s.
We apply “amp glow reduction technology” to our ASI224MC and ASI224MC-C camera, it is a hardware modification to reduce the amp-glow of the sensor, not every sensor can benefit from this modification, but it is obvious for ASI224MC, so this upgrade is for ASI224MC and ASI224MC-C only .
We made this change since April 2016, which means the current unit (ASI224MC and ASI224MC-C) we produce all equiped with the newest PCB version —V1.3.
USB 3.0 Port: can provide 5Gb bandwidth to let ASI224 run at 64fps (12bit, normal mode) or 150 fps (10bit, high speed mode) at full resolution(1.2Mega).
ST4 Port: can be used connect with auto guide port of mount, for guiding.
Our website has newest camera drivers and many DSO and Planetary capture softwares. Please make sure the newest driver and software has been installed before you start shooting:
https://astronomy-imaging-camera.com/software/
Specifications
Sensor | 1/3” CMOS IMX224/IMX225 |
Resolution | 1.2Mega Pixels 1304X976 |
Pixel Size | 3.75µm |
Sensor Size | 4.8mm*3.6mm |
Diagonal | 6.09mm |
Exposure Range | 32µs-1000s |
ROI | Supported |
Non-volatile memory/On camera storage | Build-in total 192K byte user-accessible space(image size up to 480X320) |
Interface | USB3.0/USB2.0 |
Binning | 2×2 binning supported |
Shutter Type | Rolling Shutter |
Protect window | AR coated window |
Operating System Compatibility | Mac, Windows, Linux |
Interface | USB3.0/USB2.0 |
Bit rate | 12bit output(12bit ADC) |
Adaptor | 2″ / 1.25″ / M42X0.75 |
Dimensions | 62 mm Diameter |
Weight | 100g |
Working Temperature | -5°C—45°C |
Storage Temperature | -20°C—60°C |
Working Relative Humidity | 20%—80% |
Storage Relative Humidity | 20%—95% |
10bit ADC / 12bit ADC |
1304×976 150fps / 64fps |
1280×960 152.4fps / 65fps |
800×600 241.2fps / 102.9fps |
640×480 299.4fps / 127.6fps |
320×240 577.9fps / 256.4fps |
More resolutions can be user defined |