Parts and Accessories

An M42 adapter suitable for use connecting the EFW 2/3 to a camera with an M42 front connection.An M42 adapter suitable for use connecting the EFW ...

An M54 adapter suitable for use connecting the EFW 2/3 to a camera with an M54 front connection.An M54 adapter suitable for use connecting the EFW ...

A male M54 to M42 thread adaptor suitable for connecting an EFW2/3 or OAG to an M42 ‘T’ thread connection on a telescope or reducer. Adds 1 mm to b...

A 22 mm spacer for use with the off-axis guider. This is needed to maintain the required back focus when a EFW2/3 is absent.A 22 mm spacer for use ...

3 inches for Losmandy / 3" dovetails with additional matching holes and screws for mounting the Baader Stronghold Width: 60mm for V or Z terminal ...

The T-2 change system enables fast switching between z. B. Mark V Binocular and ClickLock eyepiece, effective height only 15mm Optical path length...

Ultra short 1¼" eyepiece-clamp (w. brass locking ring) Optical length: 20mm Optimized for guiding camera, w. three set screws for utmost stability...

Baader Ultrashort 2" eyepiece clampBaader Ultrashort 2" eyepiece clamp (12 mm backfocus) to mount onto the Carl Zeiss M68 System thread. Both sides...

1¼" nosepiece with 1" (25.4mm) C-mount 18mm insertion length (with integrated 1¼ "filter mount - M28.5) also incl. Retainer-Ring to permanently h...

2" Clamping Eyepiece Holder with internal non-marring bronze clamp ring and dual large thumbscrews. Fits all Zeiss instruments with 68mm thread (w...

Allows direct connection of Baader 2" Zenith Prisms and mirrors to Schmidt-Cassegrain telescopes. For Celestron SCTs 8/9.25/11/14 with female 2" t...

Reverses 2" (50,8mm) male into 2" female SC-thread allows shortest possible rigid connection onto 2" SC-threads necessary to connet the Research G...

Converts 2" female into 2" male thread Internal M48 Filter thread for 2" filter Can be used to connect Baader Hyperion Mark III Zoom directly to a...

3D-printed ring-wrench for Baader clamping knobs Suitable for all current Baader Clamps with 20mm knurled knobs: Pan-EQ-Clamp 190mm #2451525 Pan-E...

Eyepiece barrel reducer, 1¼ "to 0.965" (24.5mm) Threaded M28.5 for 1¼" filters For using 0.965" (24.5mm) eyepieces in 1¼ "eyepiece holders and foc...

2" external thread to 1 ¼" internal thread reducter / eyepiece adaptor Strong grip with 2 screws and non-marring bronze compression ring ideal for...

T-2 Photo Adapter with 2" female thread Incl. 1¼" Filter holder NX4 (C90) / ETX (and SC!) Universal Photo Adapter

Adaptor ring with 2" external thread and T-2 external thread changes a 2" (50.8mm) inner thread to a T-2 (M42x0.75) outer thread Internal 2" (M48)...

Baader M68ext x 1 to FLI adapter flange Telescope-sided with M68 (Zeiss) male thread, to connect all parts of the Baader/Zeiss M68 System Camera-s...

M 36.4 is standard of Vixen telescopes Telescope side external thread 36.4mm Focuser side T-2 external thread (direct T-2 photo thread for Vixen, ...

Changer / Inverter Ring M48 to T-2 for T-Rings / Adapters with M48 inner thread Can be used to combine T-Rings with M48 inner threads with accesso...

Adapter 2.7"i UNF/24G (Astro Physics) to M68ext x 1 (Zeiss) Reducer: converts an AP 2.7” external thread to an M68 x1 external thread

Adapter 2.7"a UNF/24G (Astro Physics) to M68int x 1 (Zeiss) Reducing piece: converts an AP 2.7” internal thread to an M68 x1 internal thread